Thermodynamics of 2,2′,2′'-terpyridinecopper(II) complexes in aqueous solution

Summary The thermodynamic quantities relative to the protonation and the complexation of 2,2,2'-terpyridine with copper(II) ion have been determined at 25° and I=0.1 mol dm^–3 (NaNO₃). The G data was obtained by potentiometric measurements; a copper selective electrode was employed for the study of the complexation equilibria. The H values have been determined by direct calorimetry.The hydrolytic species, existing at pH>6 and their relative G and H values have also been obtained.From the thermodynamic data the importance of enthalpy and entropy terms in stabilizing the complexes is assessed.Moreover some considerations on the chelating effect are reported.Presented in part at 2 Congresso Nazionale di Chimica Analitica, Catania (1977).     

The Properties of Mixtures of Sodium Dodecylsulfate and Diethylsulfoxide in Water

The aqueous mixtures of sodium dodecylsulfate (SDS) and diethylsulfoxide (DESO) have been studied using conductivity, viscosity and surface tension techniques. The critical micellar concentration (cmc) was determined in the presence of DESO at 30, 40, and 50 C from conductance and surface tension measurements. The enthalpy ( G_m), entropy ( S_m) and Gibbs energy ( G_m) of micellization were determined from the temperature dependence of the cmc. The results obtained were compared with published results for aqueous solutions of SDS and dimethylsulfoxide (DMSO). The data demonstrate a more pronounced inhibitory effect of DESO on the micellization of SDS, in comparison with the effect of DMSO. On the basis of the dependences of the relative viscosities on concentration, as given by the Jones–Dole semi-empirical equation, the B-coefficients have been calculated for the post-micelle composition region.     

Volumetric Parameters of Interaction of Monosaccharides (D-xylose,D-arabinose,D-glucose,D-galactose) with NaI in Water at 298.15 K

Densities for monosaccharide (D-xylose, D-arabinose, D-glucose, D-galactose)–NaI–water solutions were measured at 298.15 K and were used to calculate the apparent molar volumes of these saccharides and NaI. Infinite dilution apparent molar volumes for the saccharides (V_,S) in aqueous NaI and those for NaI (V_,E) in aqueous saccharide solutions and partial molar volumes of the saccharides (V_S) and NaI (V_E) at each composition have been evaluated, together with the standard transfer volumes of the saccharides (_tr V_S) from water to aqueous NaI and those of NaI (_trV_E) from water to aqueous saccharide solutions. It was shown that the _tr V_S and _trV_E values are positive and increase with increasing co-solute molalities. Volumetric parameters indicating the interactions of NaI with saccharides in water were also obtained and applied to explore the interactions between saccharides and NaI in water. A comparison of the _ES value for NaI with those for NaCl and NaBr showed that for a given saccharide, except for glucose, the _ES value for NaBr is the largest of three sodium halides (NaCl, NaBr and NaI). These were interpreted in terms of the apparent molar electrostriction volumes ( V_e) and the structure interaction model.     

The solvent eluotropic strength on carbon adsorbents

Summary Two theoretical approaches are discussed to calculate the solvent strength () on carbon materials. One is based on the adsorbate-adsorbent interfacial tension and the other uses the theory of solubility parameters. It is shown that there is good agreement between these approaches. Experimental values are compared with theoretical ones and there is again a good agreement. Solvents having small and highly polar molecules have small values. Solvents having large and aromatic molecules have high values. Binary solvent mixtures can be classified in two groups depending on the rate of change of with the mole fraction of the strongest solvent in the mixture.Dedicated to Professor Dr. István Halász for his 60th birthday.     

Conductance of iron(III) laurate solutions in binary liquid mixtures

Summary The specific conductivity of iron(III) laurate solutions in binary liquid mixtures shows that the soap aggregates into micelles and CMC is found to be independent of temperature and concentration of benzene, acetone and tetrachloromethane in 1-butanol. The variation of molecular conductance,, with soap concentration, C, is expressed by the equation: = 10^AC^B. Both constants A and B vary with solvent composition but B remains constant with increase in temperature. Several parameters such as molecular conductance at infinite dilution, , dissociation constant, K, heat of dissociation, H, entropy, S and free energy, G of dissociation of soap have been evaluated and the effect of the nature of solvents has been discussed.     

Physicochemical Properties of Ampicillin and Amoxicillin as Biologically Active Ligands with Some Alkali Earth,Transition Metal,and Lanthanide Ions in Aqueous and Mixed Solvents at 20, 30, and 40<Superscript>∘</Superscript>C

The acid-base equilibria of ampicillin and amoxicillin were investigated in pure water and different solvent + water mixtures (solvent = methanol, ethanol, acetone, dimethylformamide, and dimethyl sulfoxide) at a constant ionic strength (I = 0.1 mol-dm^–3 KNO₃) and organic solvent volume fractions of 10, 20, and 30%. The effect of temperature on these equilibria was studied at 20, 30, and 40C. Thermodynamic functions of these ligands were calculated and discussed in terms of G, H, and S. The number of ionizable protons was determined using conductometric titrations. The formation constant of the complexes, which form by reaction of the ligands with Mg(II), Ca(II), Zn(II), Cu(II), Ni(II), Co(II), Ce(III), Pr(III), Eu(III), Gd(III), Ho(III), Er(III), and Yb(III), are determined. The relative stability of the alkali earth, transition, and lanthanide elements are compared with each other and discussed in terms of the ionic radius and the electronic structure of the outer shell of that ion. The results obtained are discussed in terms of macroscopic properties of the mixed solvents and the possible variation in microheterogenity of the solvation shells around the solute.     

The Effects of Temperature of Condensation on the Thermal Stability and Morphology of 1,4-Phenylenediamine-1-Propylsilica Xerogels

1,4-phenylenediamine-1-propylsilica hybrid xerogels were obtained for two composition at different temperatures of gelation, from 5 up to 70C. The morphological effects produced by the different gelation temperatures were investigated by using N₂ adsorption-desorption isotherms and scanning electron microscopy. The thermal stability of the organic groups and their distribution on the xerogel matrix, i.e. the fraction of the organic groups that were trapped in closed pores, formed during the xerogel synthesis, and the fraction of organic groups present on the surface, were obtained by using infrared thermal analysis. The higher porosity of the xerogels and the higher thermal stability of the organic groups were achieved for samples gelled at 25C.     

Studies of Cu?Ni supported catalysts for enantioselective hydrogenation

The effect of support content and composition of supported metal phase on the crystallite size, phase composition and catalytic properties of supported Ni and Cu–Ni catalysts has been investigated. It has been established that with increasing metal content, crystallite sizes and enantioselectivity increase. Copper added to Ni catalysts decreases metal phase dispersity and enantioselectivity.

---

, , - . , . є .

     

Study of the Surface Tensions of Cyclohexane or Methylcyclohexane with Some Cyclic Ethers

Experimental surface tensions, measured with a drop volume tensiometer and the corresponding surface tension deviations for the binary mixtures of cyclohexane or methylcyclohexane with a cyclic ether (tetrahydrofuran, tetrahydropyran, 2-methyltetrahydrofuran or 2,5-dimethyltetrahydrofuran) are given at 25 and 40 C. The results have been discussed in terms of lyophobicity and molecular interactions using the extended Langmuir isotherm. The model proposed by Patterson and Rastogi has been used to calculate the surface tensions of the pure components and of their mixtures at 25C; these calculations have been compared with the experimental results.     

A semi-empirical MO-electron correlation method for molecules and the correlation energies of π-system linear and polycyclic hydrocarbons

A set of approximations referred to as the EPCE-F2 Method is presented starting from the MO pair correlations theory by Sinanolu of ground state molecules. It yields estimates of the correlation energies using LCAO MO coefficients and one and two center pair correlation parameters. The method applied to-systems yields explicit expressions for correlation energies in terms of the number of carbon atoms,-bonds, and the number of rings. The-correlation energies of polyenes and various types of polyacenes are given. Results are compared with available alternant MO (AMO) and-CI calculations. Correlation energies per electron are also obtained as number of carbon atoms increase and approach the very large system limits like a layer of graphite.

---

Zusammenfassung Es wird ein als EPCE-F2 Methode bezeichneter Satz von Näherungen vorgeschlagen, der von der MO-Paarkorrelationstheorie für Moleküle im Grundzustand ausgeht. Die Methode liefert Näherungswerte der Korrelationsenergien, wobei die LCAO-MO-Koeffizienten und Ein- bzw. Zweizentren-Korrelationsparameter verwendet werden. Bei-Elektronensystemen erhält man explizite Beziehungen für die Korrelationsenergien, die von der Anzahl der Kohlenstoffatome, der-Bindungen und der Ringe ausgehen. Die-Korrelationsenergien der Polyene und verschiedener Typen von Polyacenen werden angegeben und die Ergebnisse mit den zur Verfügung stehenden AMO-MO und-CI Berechnungen verglichen. Auch die Korrelationsenergien pro Elektron werden in Abhängigkeit von der steigenden Anzahl der Kohlenstoffatome und für den Grenzfall sehr großer Systeme wie Graphitschichten mitgeteilt.

---

---

Work supported in part by a grant from the U.S. National Science Foundation.     

A thermal synthesis of a new tin(IV) dithiocarbamate

A new tin dithiocarbamate containing sulphur bridges, di--sulphidobis [bis(N,N-diethyldithiocarbamato)tin(IV)], has been isolated from the thermal decomposition of tetrakis(N,N-diethyldithiocarbamato)tin(IV). A dimeric structure is proposed on the basis of results from mass spectrometry, infrared spectroscopy, thermal analysis and vapour pressure osmometry.

---

Zusammenfassung Ein neues, Schwefelbrücken enthaltendes Zinn-Dithiocarbamat, Di--sulfidobis[bis(N,N-diäthyldithiocarbamato)Zinn(IV)], wurde bei der Zersetzung von Tetrakis(N,N-diäthyl-dithiocarbamato)Zinn(IV) isoliert. Aufgrund der Ergebnisse der Massenspektrometrie, der Infrarotspektroskopie, der Thermoanalyse und der Dampfdruck-Osmometrie wird eine Dimerstruktur vorgeschlagen.

---

Résumé Un nouveau dithiocarbamate d'étain contenant des ponts de soufre, le di--sulfidobis[bis(N,N-diéthyl-dithiocarbamato)é tain(IV)], a été isolé lors de la décomposition thermique du tétrakis(N,N-diethyl-dithiocarbamato) étain(IV). Une structure dimère est proposéeà partir des résultats obtenus par spectrométrie de masse, spectroscopie infrarouge, analyse thermique et osmométrie sous pression de vapeur.

---

—-- [/N,N- (/IV)], [/N,N- (/IV)], , (N,N- ) (IV). - , , .

---

---

The authors gratefully acknowledge the assistance given by Dr. A. G. Wedd with the vacuum sublimation technique. One of us, G. K. B., is grateful for a research scholarship provided by La Trobe University.     

Kinetics of isotope exchange of dioxygen with a powdered high-temperature superconducting material Ba2YCu3O7?x

It has been found that the rate of isotope exchange in Ba₂YCu₃O_7–x–O₂ system is high. Its kinetics is exponential, first order with respect to dioxygen and the exchange is of the mixed first/third type.

---

Ba₂YCu₃O_7–x–O₂ . -, -, - .

     

Kinetic laws for dehydrogenation of cyclohexane over Pd/C catalysts

A kinetic equation for cyclohexane dehydrogenation at P_O=1.0 MPa has been obtained.

---

1,0 .

     

Parent and mixed ligand complexes in the copper(II)-ethylene glycol-sulphate system

Eleven copper(II)-ethylene glycol-sulphate complexes of different compositions were prepared, one of them-CuGl₂(H₂O)₂SO₄-in single-crystal form. A thermoanalytical study of these complexes revealed three types of thermal decomposition pattern. The X-ray structure of the single-crystal demonstrated the presence of ethylene glycol bridges resulting in endless chains in the crystal.

---

Zusammenfassung Elf Kupfer(II)-äthylenglykol-sulfat-Komplexe unterschiedlicher Zusammensetzung wurden dargestellt, einer davon — CuGl₂(H₂O)₂SO₄ — in Form von Einkristallen. Die thermoanalytische Untersuchung dieser Komplexe ergab drei Typen der thermischen Zersetzung. Die röntgendiffraktometrische Bestimmung der Struktur des in Form von Einkristallen erhaltenen Komplexes zeigte, daß den Kristall endlose Ketten von Äthylenglykolbrücken durchziehen.

---

() — , — CuGl₂(H₂O)₂SO₄ — . . , , .

     

Thermal analysis of spurrite from a rotary cement kiln

A number of samples from the pre-burning zone of a wet-process cement rotary kiln were examined by combined DTA/TG and XRD for estimation of spurrite (2Ca₂SiO₄·CaCO₃). It was found that decarbonation temperatures of spurrite range from 1130 to 1190 K and they are 45 to 75 K higher than that of calcite occurring in the same sample. In the TG curves calcite and spurrite can be easily distinguished and accordingly both can be estimated from the same TG scan. Combined DTA/TG, supplemented by XRD, is a very effective method for qualitative and quantitative estimation of spurrite in cement rotary kiln materials.

---

Zusammenfassung Unter kombinierter Anwendung von DTA/TG und Röntgendiffraktionsverfahren wurde eine Anzahl Proben aus einem Vorkalzinator eines Drehrohrofens zur Zementherstellung nach dem Naßverfahren auf Spurrit (2Ca₂SiO₄·CaCO₃) untersucht. Es wurde festgestellt, daß die Temperatur für das Austreiben von CO₂ bei Spurrit zwischen 1130 und 1190 K und somit um 45–75 °C höher als bei in derselben Probe vorliegenden Kalzit liegt. Aufgrund der TG-Kurven können Kalzit und Spurrit leicht voneinander unterschieden und demzufolge mit einem einzigen TG-Scan bestimmt werden. Kombinierte DTA/TG, ergänzt durch Röntgendiffraktionsverfahren ist eine sehr leistungsstarke Methode zur qualitativen und quantitativen Bestimmung von Spurrit in Stoffen aus Zementdrehrohröfen.

---

(2Ca₂SiO₄ · CaCO₃), / , , . , 1130– 1190 , 46–75 , . . /, , .

---

---

The authors are very grateful to Mr. A. H. Dalmia, president, M/s. Orissa Cement Limited, Rajgangpur for allowing to collect the samples during the stoppage of the kiln and also for his permission to publish the paper.     

Interactions of Some Amino Acids with Aqueous Tetraethylammonium Bromide at 298.15 K: A Volumetric Approach

The apparent molar volumes, V_,2, of glycine, L-alanine, DL--amino-n-butyric acid, L-valine, and L-leucine have been determined in aqueous 0.25, 0.75, 1.0, and 1.5 mol-dm^–3 tetraethylammonium bromide (TEAB) solutions by density measurements at 298.15 K. These data have been used to calculate the infinite dilution apparent molar volumes, V_2,m, for the amino acids in aqueous tetraethylammonium bromide and the standard partial molar volumes of transfer (_tr V_2,m) of the amino acids from water to the aqueous salt solutions. The linear correlation of V_2,m for a homologous series of amino acids has been utilized to calculate the contribution of the charged end groups (NH₃⁺, COO^–), CH₂ group, and other alkyl chains of the amino acids to V_2,m. The results of the standard partial molar volumes of transfer from water to aqueous tetraethylammonium bromide have been interpreted in terms of ion–ion, ion–polar, and hydrophobic–hydrophobic group interactions. The volume of transfer data suggest that ion–ion or ion–hydrophilic interactions are predominant in the case of glycine and alanine, and hydrophobic–hydrophobic group interactions are predominant in the case of DL--amino butyric acid, L-valine, and L-leucine.     

Behavior of CSTR upon fast external effects: Possibility of increasing average conversion

The objective of the work was to study the influence of external factors (changes in composition, load and temperature) on the regimes of heterogeneous catalytic reactors. As shown, a rather fast change in external parameters causes an internal reorganization of the CSTR thus leading to an increase in average conversion.

---

( , , ). , , , .

     

Thermal and photochemical stability of polystyrene and its blends with polyvinyl chloride

The influence of some irregularities in polystyrene (PS) and polyvinyl chloride (PVC) chains on their thermal stability was investigated. UV irradiation caused an increase in the content of these irregularities in the polymers. It was found that the presence of carbonyl groups and crosslinking of the polymer chains hamper the thermal dehydrochlorination of PVC and the total decomposition of both polymers. On the other hand, weak peroxy linkages (which facilitate degradation processes) and conjugated double bonds decrease the temperature of total decomposition of PS and PVC blends.

---

Zusammenfassung Es wurde der Einfluß von Unregmlmäßigkeiten in Polystyrol (PS)- und Polyvinylchlorid (PVC)-Ketten auf deren thermische Stabilität untersucht. UV-Bestrahlung verursacht ein Ansteigen des Gehaltes an Unregelmäßigkeiten in den Polymeren. Es wurde festgestellt, daß die Gegenwart von Carbonylgruppen und Querverbindungen der Polymerketten die thermische Dehydrochlorierung von PVC und eine vollständige Zersetzung beider Polymere verhindern. Andererseits senken Peroxidverknüpfungen (die die Degradierungsvorgänge erleichtern) und konjugierte Doppelbindungen die Temperatur für eine vollständige Zersetzung von PS und PVC Gemischen.

---

. - . , . , , , .

     

Acetylene adsorption on a clean iridium surface

The interaction of C₂H₂ with a polycrystalline iridium surface at 140 KT500 K has been studied by AES, XPS and UPS. A model of the bonding between C₂H₂ and Ir by the 1 orbitals of the hydrocarbon is proposed. The more pronounced energy splitting between the orbitals of acetylene during adsorption compared to that in the gas phase is ascribed to deformation of the acetylene molecule.

---

C₂H₂ . 140 KT500 K AES, XPS UPS. C₂H₂ Ir 1- . - , , .

     

Oxidative dehydrogenation of ethylbenzene over a charcoal catalyst

The oxidative dehydrogenation of ethylbenzene over a charcoal catalyst has been studied by the pulse technique. The styrene yields for the oxidation of ethylbenzene by gaseous oxygen and upon the interaction of ethylbenzene with oxygen adsorbed on charcoal are shown to be the same.

---

. , , , .