Single-mode antiresonant terahertz fiber based on mode coupling between core and cladding

Based on the index-induced mode coupling between the higher-order mode in core and the fundamental mode in cladding tubes, the single-mode operation can be realized in any antiresonant fibers (ARFs) when satisfying that the area ratio of cladding tube and core is about 0.46:1, and this area ratio also should be modified according to the shape and the number of cladding tubes. In the ARF with nodal core boundary, the mode in core also can couple with the mode in the wall of core boundary, which can further enhance the suppression of high-order mode. Accordingly, an ARF with conjoint semi-elliptical cladding tubes realizes a loss of higher-order mode larger than 30 dB/m; simultaneously, a loss of fundamental mode loss less than 0.4 dB/m.     

Observation of the optoacoustic effect in an optical fibre

The rediationless absorption of light propagating in optical fibres induces both stress waves and thermal waves in the fibre medium. Detection of such waves is termed the optoacoustic effect. Successful detection in optical fibres is easily obscured by scattered light impinging on the detector. We have obtained a signal of 2 mV on a piezoceramic transducer attached to a commercial step-index optical fibre after passage of a 1 J ruby laser light pulse along the fibre axis. No signal was, however, produced when the transducer was not in contact with the fibre. Similar results were obtained using chopped cw laser radiation but then more care had to be taken since the transducers used had a measureable sensitivity to the low frequency chopped radiation emitted perpendicular to the optical fibre axis.     

Ray theory and random mode coupling in an optical fibre waveguide. II

Ray theory has been proved to work in Part I and is now applied to general graded fibres. A new approach to the time problem is described and a hidden effect of random distortion is analysed. It is concluded that the bandwidth of very well graded fibres may not be improved by random mode coupling.     

Ray theory and random mode coupling in an optical fibre waveguide. I

Ray theory is used here to analyse the effect of random distortion of an optical fibre waveguide on the propagation of electromagnetic waves. In this first part, the case of step index guide is looked at in depth and agreement is found between this method and Marcuse and Gloge's theories of mode coupling. A fairly rigorous approach will be developed in this first paper in order to assess the possibility of the method. Part II will be devoted, in a more speculative fashion, to the study of random coupling in general graded fibres.     

A partially reflecting metal cladding: its effect on the modes of dielectric optical waveguides

If the metal cladding of a dielectric optical waveguide is sufficiently thin to be only partially reflecting, then the waveguide modes differ from those of the conventional metal-clad waveguide. The TE modes are little affected by a variation in the metal thickness but the TM modes change considerably due to a coupling between the waveguide modes and the surface plasma waves supported by both the metal: dielectric interfaces and the metal film. It is the refractive index of the dielectric cladding which is remote from the guiding core that determines whether the lowest order TM mode is the TM₀ or TM₁ mode. This dielectric cladding also strongly influences the attenuation of the TM modes and, if the guide supports a TM₀ mode, then the attenuation of the TM modes far from cut-off are an order of magnitude higher than that of the corresponding modes when the guide cannot support a TM₀ mode. If the guide can support a TM₀ mode then its dimensions can be chosen such that it will support the TE_N and TM_N modes with equal phase velocities. A lossless approximation is used to develop an expression which will specify the required guide dimensions directly and parametric plots of these dimensions are discussed.     

光纤纤芯及包层模有效折射率计算及仿真

光纤结构设计、模间色散求解、光纤光栅模式耦合等问题的研究, 都需要对光纤纤芯及包层模的有效折射率进行精确计算. 本文以光纤三层结构模型为基础, 结合该模型下的模式本征方程, 使用截弦法求解了纤芯模有效折射率, 并将计算结果与COMSOL软件模拟的对应纤芯模的传输光场进行对比, 验证了计算结果正确.使用区间遍历算法对包层模有效折射率进行了求解, 与已有的传统方法相比, 该方法可以有效防止求解过程中根的遗漏、避免特征方程产生的奇点, 并能保证模式的正规性.本文采用Mathematica软件对求解过程进行仿真, 获得了纤芯模和包层模有效折射率与波长关系曲线. 关键词： 光纤传输模式 有效折射率 截弦法 区间遍历算法     

Entanglement transfer between atoms in two distant cavities via an optical fibre

This paper presents a treatment of the entanglement transfer between atoms in two distant cavities coupled by an optical fibre. If the atoms resonantly and collectively interact with the local single-mode cavity fields and the dipole--dipole interaction between the atoms is neglected, then it shows that a complete transfer of entanglement from one pair of atoms to another can be deterministically realized. Furthermore, it also investigates the effects of dipole--dipole interaction on entanglement transfer on the condition that the interaction between the atoms and the cavity is much weaker than the coupling between the cavity and the fibre.     

Surface plasmon polariton coupling between nano recording marks and their effect on optical read-out signal

We use the three-dimensional finite-difference time-domain method to investigate surface plasmon polariton coupling between two nano-recording marks which are of different shapes. The different coupling characteristics and the influence of these coupling effects on the read-out reflection signal will be discussed.     

Stimulated supercontinuum-radiation generation of carbon disulfide by all-trans-β-carotene fluorescence enhancement effect in liquid core optical fibre

We demonstrate stimulated supercontinuum-radiation of carbon disulfide (CS₂) influenced by biological molecules all-trans-β -carotene in liquid core optical fibre (LCOF). By virtue of the broad fluorescence characteristics and large third-order optical nonlinearities of all-{trans}-β-carotene,the high-order Stokes lines of stimulated Raman scattering (SRS) and the multi-order Stokes lines of stimulated Brillouin scattering (SBS) excitated by SRS are observed at low input-laser energies. The results indicate that the fluorescence not only enhances the SRS, but also the SBS. These Stokes lines generate the SRS--SBS supercontinuum radiation (RBSR). A flat-amplitude bandwidth of 110 nm from 515nm to 625nm is observed when a frequency-doubled Nd:YAG laser at 532nm with an energy of 0.86mJ is used. This result is expected to be useful for the multi-wavelength fibre laser.     

Coupling between an optical phonon and the Kondo effect

We explore the ultrafast optical response of Yb14MnSb11, providing further evidence that this compound is the first d-electron, ferromagnetic, underscreened Kondo lattice. These results also provide the first demonstration of coupling between an optical phonon mode and the Kondo effect.     

Analysis of a widely tunable long-period grating by use of an ultrathin cladding layer and higher-order cladding mode coupling

A widely tunable long-period grating in single-mode fiber is analyzed by use of an ultrathin cladding layer and higher-order cladding mode coupling. The numerical simulation shows that a 225-nm tuning range in the newly designed ultrathin long-period grating (cladding thickness, 35 microm) with third-order cladding mode coupling can be obtained. The analyzed tuning range is seven times wider than those of the other known long-period gratings. We believe that the proposed highly sensitive long-period grating will be widely used as a gain-flattening filter for ultrawideband optical amplifiers and fast tunable filters in dynamic optical communication systems.     

Space radiation effect on fibre optical gyroscope control circuit and compensation algorithm

The process of a γ-irradiation experiment of fibre optical gyroscope （FOG） control circuit was described, in which it is demonstrated that the FOG control circuit, except for D/A converter, could endure the dose of 10krad with the protection of cabin material. The distortion and drift in D/A converter due to radiation, which affect the performance of FOG seriously, was indicated based on the elemental analysis. Finally, a compensation network based on adaptive neuro-fuzzy inference system is proposed and its function is verified by simulation.     

The effect of an inhomogeneous cladding of a gradient optical waveguide on the mode and envelope characteristics of a soliton pulse

The nonlinear dynamics of a short pulse in a gradient waveguide layer is studied analytically taking into account the occurrence of a cladding layer and the longitudinal inhomogeneity of the two layers. The class of functions is presented in terms of which the transverse profiles of the refractive indices of both the gradient and the cladding layers can be represented, and, at the same time, the mode structure of the pulse can be explicitly described in terms of a hypergeometric equation. Expressions are presented that describe the variations of the propagation constant and transverse distribution of the wave field under the action of the longitudinal inhomogeneities of the gradient and cladding layers. It is shown that the envelope of the pulse satisfies the generalized nonlinear Schrödinger equation the coefficients of which are functions of the longitudinal coordinate and are expressed via the refractive indices of the waveguide layer and cladding.     

Effect of coupling between linear absorption and nonlinear absorption on Z-scan measurements

The contribution of multiphoton absorption to open-aperture Z-scan measurements is analysed by coordinate transformation. The approximate closed-form solution is obtained, which is suitable for application in higher-optical power regime. As an example, the coupling between linear absorption and two-photon absorption is discussed in detail.     

Inhomogeneity of turbid media and its effect on the MTF of an optical system

Summary A numerical procedure, partly based on the Monte Carlo method, is employed to examine the effect of inhomogeneity of a turbid medium on the Modulation Transfer Function of an optical system. The results, both for a particulate of small size and of size comparable with wavelength, show a general effect of the ?shower curtain? type.     

Theory of power coupling between multimode optical fibres

In this paper power coupling between two multimode optical fibres is investigated. A formalism (based on a geometrical approach) suitable for analysing any coupling configuration between fibres with any index profile and any radiance distribution is presented. The model is applied to obtain coupling losses both in uniformly excited parabolic- and step-index fibres, in the presence of all kinds of coupling errors. Numerical results of extensive utility are shown and useful asymptotic expressions of coupling efficiency, valid for small values of coupling error parameters, are derived together with some practical rules for error combination. Mention is also made of some experimental results we have obtained, which corroborate some previous assertions. The work can supply a useful tool in the design of joints and connectors between single fibres or optical cables.     

基于ZEMAX的LED光源与光纤的耦合系统设计

在原有金属卤化物光源与光纤耦合结构的基础上,提出了一种新的光纤耦合方案,为了满足光供电系统的光功率需求,根据几何光学的理论,提出一种新的LED光源阵列排布方案。在对LED的发光特性研究的基础上,设计了一种新的光学准直方法,运用ZEMAX软件进行仿真,并对透镜参数进行了优化,准直结果角度控制在了±4°范围内。针对光束尺寸与光纤的匹配问题,进行了聚焦耦合设计,弥散斑的RMS尺寸大小为7.410μm,GEO点尺寸为16.091μm,光学系统95%以上的能量集中在20μm范围之内,达到了很好的耦合效果。     

The spectral sensitivity of long period gratings fabricated in elliptical core D-shaped optical fibre

Long period gratings (LPGs) were written into a D-shaped optical fibre that has an elliptical core with a W-shaped refractive index profile and the first detailed investigation of such LPGs is presented. The LPGs’ attenuation bands were found to be sensitive to the polarisation of the interrogating light with a spectral separation of about 15 nm between the two orthogonal polarisation states. A finite element method was successfully used to model many of the behavioural features of the LPGs. In addition, two spectrally overlapping attenuation bands corresponding to orthogonal polarisation states were observed; modelling successfully reproduced this spectral feature. The spectral sensitivity of both orthogonal states was experimentally measured with respect to temperature and bending. These LPG devices produced blue and red wavelength shifts depending upon the orientation of the bend with measured maximum sensitivities of −3.56 and +6.51 nm m, suggesting that this type of fibre LPG may be useful as a shape/bend orientation sensor with reduced errors associated with polarisation dependence. The use of neighbouring bands to discriminate between temperature and bending was also demonstrated, leading to an overall curvature error of ±0.14 m⁻¹ and an overall temperature error of ±0.3 °C with a maximum polarisation dependence error of ±8 × 10⁻² m⁻¹ for curvature and ±5 × 10⁻² °C for temperature.