Reverse micellar aggregates: effect on ketone reduction. 1. Substrate role

The reduction of three aromatic ketones, acetophenone (AF), 4-methoxyacetophenone (MAF), and 3-chloroacetophenone (CAF), by NaBH(4) was followed by UV-vis spectroscopy in reverse micellar systems of water/AOT/isooctane at 25.0 degrees C (AOT is sodium 1,4-bis-2-ethylhexylsulfosuccinate). The first-order rate constants, k(obs), increase with the concentration of surfactant due to the substrate incorporation at the reverse micelle interface, where the reaction occurs. For all the ketones the reactivity is lower at the micellar interface than in water, probably reflecting the low affinity of the anionic interface for BH(4)(-). Kinetic profiles upon water addition show maxima in k(obs) at W(0) approximately 5 probably reflecting a strong interaction between water and the ionic headgroup of AOT; at W(0) < 5 by increasing W(0) BH(4)(-) is repelled from the anionic interface once the water pool forms. The order of reactivity was CAF > AF > MAF. Application of a kinetic model based on the pseudophase formalism, which considers distribution of the ketones between the continuous medium and the interface, and assumes that reaction take place only at the interface, gives values of the rate constants at the interface of the reverse micellar system. At W(0) = 5, we conclude that NaBH(4) is wholly at the interface, and at W(0) = 10 and 15, where there are free water molecules, the partitioning between the interface and the water pool has to be considered. The results were used to estimate the ketone and borohydride distribution constants between the different pseudophases as well as the second-order reaction rate constant at the micellar interface.     

Reverse micellar aggregates: effect on ketone reduction. 2. Surfactant role

Kinetics of the reduction of 3-chloroacetophenone (CAF) with sodium borohydride (NaBH(4)) were followed by UV-vis spectroscopy at 27.0 degrees C in different reverse micellar media, toluene/BHDC/water and toluene/AOT/water, and compared with results in an isooctane/AOT/water reverse micellar system. AOT is sodium 1,4-bis-2-ethylhexylsulfosuccinate, and BHDC is benzyl-n-hexadecyl dimethylammonium chloride. The kinetic profiles were investigated as a function of variables such as surfactant and NaBH(4) concentration and the amount of water dispersed in the reverse micelles, W(0) = [H(2)O]/[surfactant]. In all cases, the first-order rate constant, k(obs), increases with the concentration of surfactant as a consequence of incorporating the substrate into the interface of the reverse micelles where the reaction takes place. The reaction is faster at the cationic interface than at the anionic one probably because the negative ion BH(4)(-) is part of the cationic interface. The effect of the external solvent on the reaction shows that reduction is favored in the isooctane/AOT/water reverse micellar system than that with an aromatic solvent. This is probably due to BH(4)(-) being more in the water pool of the toluene/AOT/water reverse micellar system. The kinetic profile upon water addition depends largely on the type of interface. In the BHDC system, k(obs) increases with W(0) in the whole range studied while in AOT the kinetic profile has a maximum at W(0) approximately 5, probably reflecting the fact that BH(4)(-) is part of the cationic interface while, in the anionic one, there is a strong interaction between water and the polar headgroup of AOT below W(0) = 5 and, above that, BH(4)(-) is repelled from the interface once the water pool has formed. Application of a kinetic model based on the pseudophase formalism, which considers the distribution of the ketone between the continuous medium and the interface and assumes that reaction takes place only at the interface, has enabled us to estimate rate constants at the interface of the reverse micellar systems. At W(0) < 10, it was considered that NaBH(4) is wholly at the interface and, at W(0) >/= 10, where there are free water molecules, also the partitioning between the interface and the water pool was taken into account. The results were used to evaluate CAF and NaBH(4) distribution constants between the different pseudophases as well as the second-order reaction rate constant of the reduction reaction in the micellar interface.     

Study of the alkaline fading of phenolphthalein in microemulsions

The reactions of the alkaline fading of phenolphthalein (PN) have been studied in water/sodium bis(2-ethylhexyl)sulfosuccinate (AOT)/isooctane microemulsions by monitoring the absorbance changes of PN in the system with the time and the results compared with those found for the same reactions in aqueous solutions. It was found that the values of the equilibrium constants and the forward reaction rate constants in the microemulsions were significantly larger than that in aqueous solutions and decreased with increasing the molar ratio of water to AOT (ω), except for that with low ω. The temperature dependence of the reaction rate constant was analyzed to obtain the values of free energy, enthalpy, and entropy of activation, which suggests the existence of an isokinetic relationship and a common mechanism for the reactions occurring in the microemulsions with different ω. It was also observed that the competition between the reactions of the alkaline fading of PN and the hydrolyzation of AOT in water/AOT/isooctane microemulsions when the reaction time was sufficiently long.     

Effects of Alkylamines on the Percolation Phenomena in Water/AOT/Isooctane Microemulsions

We carried out an investigation on the influence of several alkylamines, frequently present in reactions carried out in microemulsions, on the properties of the water/AOT/isooctane system. The presence of alkylamines has an important effect on the electrical percolation phenomena. This effect of amines on the electrical percolation of microemulsions of AOT/isooctane/water can be explained by taking into account the ability of these substrates to associate with the AOT film in the microemulsion, the basicity of the amine, and the different solubility of the amine in the three pseudophases of the system. Copyright 2000 Academic Press.     

Solvolysis of benzoyl halides in water/NH4DEHP/isooctane microemulsions

A study was carried out on the solvolysis reactions of different benzoyl halides in microemulsions of water/NH4DEHP/isooctane, where NH4DEHP is ammonium bis(2-ethylhexyl) phosphate. Because of the low solubility of benzoyl halides in water, they are distributed between the continuous medium and the interface of the microemulsion, where the reaction takes place. The application of the pseudophase model has allowed us to obtain the distribution constants and the rate constants at the interface for the benzoyl halides. Reaction mechanisms and the changes in these mechanisms in terms of the water content of the microemulsion have been determined on the basis of kinetic data. The influence of the substituent and the leaving group on the reaction rate has been investigated. A comparison of kinetic results with those previously obtained in water/AOT/isooctane microemulsions allows a kinetic evaluation of the change in the microemulsion properties with the surfactant.     

Ionizing power and nucleophilicity in water in oil AOT-based microemulsions

A study was carried out on the solvolysis of substituted phenyl chloroformates in AOT/isooctane/water microemulsions. (AOT is the sodium salt of bis(2-ethyhexyl)sulfosuccinate.) The results obtained have been interpreted by taking into account the distribution of the chloroformates between the continuous medium and the interface of the microemulsions, where the reactions take place. The values obtained for the rate constant in the interface, k(i), decreases as the water content of the microemulsions increases, as a consequence of the decrease in its nucleophilic capacity. This behavior is consistent with a rate-determining step of water addition to the carbonyl group. The values of k(i) allow us to obtain the slopes of the Hammett correlations at the interface of the microemulsions, rho = 2.25, whose values are greater than those obtained in an aqueous medium, rho = 0.82. This increase in the Hammett slope is similar to that observed in ethanol/water mixtures and is a consequence of a variation in the structure of the transition state of the reaction where there is a smaller extension of the expulsion of the leaving group. The values of the rate constants at the interface of the microemulsions have allowed us, by means of the Grunwald-Winstein equation, to obtain the solvent ionizing power and the nucleophilicity of the solvent. The values obtained for Y(Cl) increase together with the water content of the microemulsion, whereas the values of N(T) decrease. These variations are a consequence of the interaction between the AOT headgroups and the interfacial water, where the water molecules act like electronic acceptors. The intensity of this interaction is greater if the system has a small water content, which explains the variation of Y(Cl) and N(T).     

Ester aminolysis by morpholine in AOT-based water-in-oil microemulsions

A kinetic study of the aminolysis of p-nitrophenyl acetate (NPA) by morpholine (MOR) in AOT/isooctane/water (w/o) microemulsions was conducted. Based on the solubilities of NPA and MOR in water and isooctane, both compounds partition between the continuous medium, interface and water microdroplets of the microemulsion. Because the rate of the aminolysis reaction decreases with decreasing polarity of the solvent, the reaction must take place to a negligible extent in the continuous medium relative to the interface and the aqueous microdroplets. We used the pseudo-phase model to determine the rate constants at the interface, k(2)(i), and in the water microdroplets, k(2)(w). Both k(2)(i) and k(2)(w) were found to be independent of W in the aminolysis of NPA by MOR. This is a result of the expected increase in k(2)(w) on decreasing W being offset by the decrease in k(2)(i) with increase in the water content of the system. Based on the results, the reaction takes place to an extent of only 16% in the water microdroplets at W=40, the proportion decreasing with decreasing water content.     

Water in oil microemulsions as reaction media for a Diels-Alder reaction between N-ethylmaleimide and cyclopentadiene

The Diels-Alder reaction between N-ethylmaleimide and cyclopentadiene in water/AOT/isooctane microemulsions, where AOT denotes sodium bis(2-ethylhexyl)sulfosuccinate, was studied. The rate of the reaction was found to be higher than that obtained in pure isooctane, irrespective of the particular microemulsion composition used. The efficiency of this catalytic action ranged from a factor of 3 at low water contents (viz., W = [H2O]/[AOT] = 2) to 15 at W = 35. On the basis of these results, the reaction takes place simultaneously in the continuous medium and at the microemulsion interface. The favorable arrangement of the reactants at the interface results in more than 95% of the reaction occurring in this microenvironment. The kinetic analysis revealed the rate constant at the microemulsion interface to change with the water content. For small W values a bimolecular rate constant at the interface close to that observed in hexane was obtained. This value increases with W and for W > 20, a value close to that obtained in ethanol was found. This can be ascribed to the absence of hydrogen bonding at the microemulsion interface as well as the accelerating effects due to enforced hydrophobic interactions.     

Effect of AOT on enzymatic activity of the organic solvent resistant tyrosinase from Streptomyces sp. REN-21 in aqueous solutions and water-in-oil microemulsions

The effect of AOT (sodium-bis(2-ethylhexyl sulfosuccinate)) on enzymatic activity of the organic solvent resistant tyrosinase (OSRT) in aqueous phosphate buffer solutions and in water-in-oil microemulsions of the water/AOT/isooctane system has been investigated. In contrast to mushroom tyrosinase, AOT does not activate OSRT in aqueous solutions, altering its activity very little at concentrations lower than 2 mM. Increasing contents of AOT in isooctane reduce the observed initial reaction rates of oxidation of t-butylcatechol (tBC) and 4-methylcatechol (4-MC). Similarly to mushroom tyrosinase, the effect has been described using an equation based on preferential binding of the substrates by surfactant interface layers. The apparent Michaelis-Menten substrate binding constants increase linearly with AOT concentration (with slopes of 0.12+/-0.02 and 0.051+/-0.006 for tBC and 4-MC, respectively), and the effective enzyme turnover number in the microemulsions remains practically constant.     

AOT-based microemulsions accelerate the 1,3-cycloaddition of benzonitrile oxide to N-ethylmaleimide

We studied the 1,3-dipolar cycloaddition of benzonitrile oxide to N-ethylmaleimide in AOT/isooctane/water microemulsions at 25.0 degrees C and found the reaction rate to be roughly 150 and 35 times greater than that in isooctane and pure water, respectively. The accelerating effect of the microemulsion is the combined result of an increase in the local concentrations of the reactants through incorporation into the interface and of the intrinsic rate of the process through electrostatic interactions with the headgroups in the surfactant.     

Intramolecular charge transfer reaction, polarity, and dielectric relaxation in AOT/water/heptane reverse micelles: pool size dependence

Intramolecular charge transfer (ICT) reaction in a newly synthesized molecule, of 4-(1-morpholenyl) benzonitrile (M6C), in AOT/water/heptane reverse micelles at different pool sizes has been studied by using steady-state and time-resolved fluorescence emission spectroscopy. The pool size dependences of the reaction equilibrium constant and reaction rate have been explained in terms of the average polarity of the confined solvent pools estimated from the fluorescence emission Stokes shift of a nonreactive probe, coumarin 153, dissolved in these microemulsions. The complex permittivity measurements in the frequency range 0.01相似文献   

Microheterogeneous solvation for aminolysis reactions in AOT-based water-in-oil microemulsions

A kinetic study was carried out on the aminolysis of p-nitrophenyl acetate (NPA) by n-decylamine (DEC), piperazine (PIP) and sarcosine (SAR) in AOT/isooctane/water (w/o) microemulsions. By using the pseudophase model both the rate constants at the interface, k2i, and the water microdroplet, k2w, can be obtained. The obtained results show that k2i increases together with the water content of the microemulsion, whereas k2w increases as the water content of the system decreases. In the aqueous microdroplet the predominant interaction Na+...OH2 causes a decrease in the strength of the hydrogen bonds and therefore facilitates the desolvation of the reagents as W decreases. This desolvation of the reagents causes the increase of k2w as W decreases. In the interface of the microemulsion the predominant interaction SO3-...HOH causes an increase in the electronic density on the water molecules and the consequent decrease in their efficiency in the solvation of the partial negative charge, which develops on the carbonyl oxygen atom in the transition state of the reaction. This decrease in the solvation causes k2i to decrease together with the water content of the system.     

Kinetics for the Reaction between Potassium Ferricyanide and Cobalt Chloride in Aqueous Solution and Microemulsion

The kinetics for the reaction between potassium ferricyanide (K₃Fe(CN)₆) and cobalt chloride (CoCl₂) in aqueous solution and water/bis(2-ethylhexyl) sodium sulfosuccianate (AOT)/isooctane microemulsions were studied by three-wavelength spectrophotometry at 298.2 K. The second-order rate constants (k₂) were calculated from the time dependence of the concentration of reactant K₃Fe(CN)₆. The result showed that the reaction rates in water/AOT/isooctane microemulsions were slower than that in the aqueous solution, and k₂ decreased with molar ratio (ω) of water to AOT in microemulsions, which was interpreted by the transition state theory and confirmed that the reaction took place at the interfaces of the microemulsion water pools.     

Influence of anionic surfactants on the electric percolation of AOT/isooctane/water microemulsions

A study was carried out concerning the influence of sodium alkyl sulfonates on the electric percolation of AOT/isooctane/water microemulsions ([AOT] = 0.5 M and W = [H2O]/[AOT] = 22.2). An important effect was observed with regard to the percolation temperature caused by the addition of small quantities of alkyl sulfonates (rho = [alkyl sulfonate]/[AOT] = 0.01). The short chain alkyl sulfonates (C3-C5) cause an increase in the percolation temperature, which in turn is reduced as we increase the chain length of the additive until we obtain a percolation temperature which is lower than that which is observed in the absence of an additive (C6-C8). For hydrocarbon chains of a greater length we can observe a new increase in the percolation temperature (C10-C18). This behavior has been explained as a consequence of (i) the incorporation of the additives at the interphase of the microemulsion and (ii) the geometric parameters of the different surfactants added to the microemulsion.     

微乳液和微乳液凝胶中脂肪酶催化的酯合成反应

在ACT/异辛烷/水形成的油包水微乳液中,研究了Candidalipolytical(CL)脂肪酶催化庚酸和庚醇的酯化反应,动力学研究表明反应符合乒乓(Ping-Pong)BiBi机制,两底物酸和醇均有抑制效应,并测定了反应的表观动力学常数,将CL脂肪酶固定于含明胶的微乳液凝胶(MBGs)中,可制得固定化脂肪酶,含酶的MBGs在非极性有机溶剂中可作为一种新的固相催化剂,并研究了MBGs在异辛烷中催化合成酯反应的性能,所制得的MBGs重复利用性和贮存稳定性都非常好。     

The oxidative degradation of dibenzoazepine derivatives by cerium(IV) complexes in acidic sulfate media

The kinetics of the oxidation of imipramine and desipramine using cerium(IV) complexes were studied in the presence of a large excess of azepine derivative (TCA) in acidic sulfate media using UV-Vis spectroscopy. The reaction proceeds via dibenzoazepine radical formation, identified by EPR measurements. The kinetics of the first degradation step were studied independently of the further slower degradation reactions. Linear dependences, with zero intercept, of the pseudo-first-order rate constants (k(obs)) on [TCA] were established for both dibenzoazepine radical formation processes. Rates of reactions decreased with increasing concentration of the H(+) ion indicating that cerium(IV) as well as both reductants exist in an equilibrium with their protolytic forms. The activation parameters for the degradation of dibenzoazepine derivatives in the first oxidation stage were as follows: ΔH(≠) = 39 ± 2 kJ mol(-1), ΔS(≠) = -28 ± 8 J K(-1) mol(-1) for imipramine and ΔH(≠) = 39 ± 2 kJ mol(-1), ΔS(≠) = -28 ± 6 J K(-1) mol(-1) for desipramine, respectively. Imipramine and desipramine radicals dimerized leading to an intermediate radical dimer, which decayed in a first-order consecutive decay process. These two further reactions proceed with rates which are characterized by non-linear dependences of the pseudo-first-order rate constants (k(obs)) on [TCA]. The degradation reaction of the intermediate radical dimer leads to an uncharged dimer as a final product. Mechanistic consequences of all the results are discussed.     

Determination of water states and the structural parameters of W/O microemulsions

The states of water in sodium bis(2-ethylhexyl) sulfosuccinate (AOT)/isooctane/water reverse(W/O) microemulsions system have been investigated by using Fourier transform infrared spectroscopy(FT-IR) technique. The broad peak obtained for hydroxy(O-H) of water has been resolved by least square curve-fitting. It has been observed that the water solubilized in microemul-sion droplets has four states, i.e. bound water with sulfo-group, free water, bound water with sodium counterion in the water pool of microemulsion droplets and a small amount of trapped water in the palisade layer of microemulsion droplets. The following have also been determined: the aggregation number (n), the radius of the water pool in the microemulsions(rw), the thickness of the bound water with sulfo-group(d1), the thickness of the bound water with sodium counterion(d2), the total thickness of the bound water (d) and the effective area of head groups of AOT(AAOT).     

Influence of polyethylene glycols on percolative phenomena in AOT microemulsions

The influence of different polyethylene glycol (PEG) on the percolation of the ternary system composed by sodium bis(2-ethylhexyl) sulfosuccinate (AOT) + isooctane + water has been studied. The additives used were chosen on the basis of its chain length (the number of polymeric units). In all cases, we observed a decrease in the percolation threshold on increasing the amount of PEG added to the AOT microemulsions. We observed a correlation between the effect exerted by the additive upon the percolation temperature and its chain length. Moreover, a relationship between the percolation temperature and the additive partition coefficient between 1-octanol and water (logP) was found. Both of them proved the importance of the inclusion of the additives into the microemulsion interface to explain their influence upon the percolative phenomenon. Such inclusion modified the properties of the AOT film, facilitating the exchange of matter between droplets.     

Kinetic studies of the on/off reaction of the amino group in the side chain of Cu(II), Ni(II), and Co(II) complexes with 14-membered tetraazamacrocycles

The kinetics of the on/off reaction of the amino group in the side chain of tetraazamacrocyclic Cu2+, Ni2+ and Co2+ complexes has been measured. The rate law k(obs)=k(0)+k(H)[H+]+k(OH)/[H+], the sum of the forward and reverse reaction, gives rise to u-shaped pH dependences from which the three rate constants can be determined. k(H) describes the proton assisted dissociation of the amino group bound to the metal ion and is roughly correlated to the equilibrium constant of the reaction. k(OH) is determined by the protonation constant of the free amino group and the rate constant describing the binding of the amino group to the metal ion. k(0) is composed of the rate constant for the opening of the chelate ring without proton assistance and the rate for the reactivity of the ammonium group in the formation of the chelate ring. Our results show that the rates of the opening and closing of the chelate ring are very little dependent on the nature of the metal ion.     

Influence of glymes upon percolative phenomena in AOT-based microemulsions

A study was carried out on the influence of different polyethylene glycol dimethyl ethers (glymes) on the conductance percolation of AOT/isooctane/water microemulsions. The glymes used were chosen on the basis of this chain length (the number of polymeric units). In all cases we observed a decrease in the percolation threshold on increasing the amount of a glyme added to the microemulsion. We observed a correlation between the effect exerted by the glyme and its chain length, which shows the importance of including them in the interface for the percolative phenomenon. Such inclusion modifies the properties of the AOT film, facilitating the exchange of matter between droplets.