Polypyrrole modified stainless steel frits for on-line micro solid phase extraction of ochratoxin A

Polypyrrole (PPy) was electrochemically synthesized on stainless steel frits as a sorbent for the micro solid phase extraction (SPE) of ochratoxin A (OTA). Using 20 l of standard solution under a fast flow rate of 0.5 ml/min, 80% recovery of OTA was achieved in the concentration range from 0.1–10 pg/l. This good recovery was achieved within a short residence time of 1.2 s. A binding capacity of 1 ng OTA was estimated for each PPy-modified frit, or 2 ng OTA for two frits in series. The bound OTA could be pulsed eluted (PE) with 20 l of 1% triethylamine in acetonitrile. On-line coupling of this PPy-on-a-frit and PE technique to high performance liquid chromatography (HPLC) was straightforward. On-line SPE-PE-HPLC results clearly demonstrated the capability of PPy-on-a-frit to bind OTA in the presence of red wine, beer, and orange juice components.     

Determination of ochratoxin A in Portuguese rice samples by high performance liquid chromatography with fluorescence detection

A sensitive and accurate analytical method for the determination of ochratoxin A (OTA) in rice, based on extraction with phosphate-buffered saline/methanol, an immunoaffinity column (IAC) for clean-up, and high performance liquid chromatography with fluorescence detection (HPLC-FD), is described. The limit of quantification of the proposed method was 0.05 g kg^–1. Recovery of OTA from rice samples spiked at 0.05 g kg^–1 was 92%, with a within-day RSD of 5.4%. The proposed method was applied to 42 rice samples from Portugal and the presence of OTA was found in six samples at concentrations ranging from 0.09 to 3.52 g kg^–1. The identification of OTA was confirmed by methyl ester derivatization and then HPLC analysis. The daily intake of OTA by the Portuguese population was also estimated.     

Molecularly-imprinted polypyrrole-modified stainless steel frits for selective solid phase preconcentration of ochratoxin A

A molecularly-imprinted polymer (MIP) was prepared by electropolymerization of pyrrole (Py) onto a stainless steel frit, using ochratoxin A (OTA) as the template, in order to make a micro solid phase preconcentration (SPP) device. The OTA template was removed with 1% triethylamine (TEA) in methanol. Compared to non-imprinted polypyrrole (PPy), the molecularly-imprinted polypyrrole (MIPPy) enhanced the selective binding of OTA. The percentage recovery improved from 0 to 40% when the OTA sample solution was acidified with 1 M HCl (1% by volume). At a flow rate of 0.2 mL/min, maximum OTA binding was reached in 6 min after a total loading of 3.2 ng OTA. Final elution of the OTA was analyzed by high performance liquid chromatography (HPLC) with fluorescence detection, using 20:80 v/v acetonitrile–ammonia buffer (NH₄Cl/NH₃, 20 mM, pH 9.2) as the mobile phase. The MIPPy-SPP-HPLC results clearly demonstrated that the MIPPy-SPP device afforded selective preconcentration of OTA from red wine samples, at OTA concentration levels as low as 0.05 ppb, prior to HPLC analysis.     

Determination of pentachlorophenol residues in wine and corks by solvent extraction methodology and specific gas chromatography detection

Summary A gas chromatographic methodology with selective detection is presented for the analysis in wines and corks of pentachlorophenol residues, which are suspected to be the most likely precursors of some off-flavours described in several wine samples. After derivatisation, pentachlorophenol acetate residues were monitored by electrolytic conductivity detection and/or mass spectrometric detection in the selective ion mode at m/z 264 and 266. Recoveries varied from 80 to 96% for wine samples fortified with 5 to 100 g l^–1 and from 83 to 91% for corks (fortified at 25 to 100 g kg^–1). The proposed methodology allowed for a determination limit of g l^–1 for wine and 10 g kg^–1 for corks.     

Simultaneous determination of neodymium and erbium in rare earth mixture with 5,7-dibromo-8-hydroxyquinoline and TX-100 by third-derivative spectrophotometry

The absorption spectra of 4f electron transitions of the complexes of neodymium and erbium with 5,7-dibromo-8-hydroxyquinoline in the presence of octylphenol poly(ethyleneglycol)ether have been studied by normal and third-derivative spectrophotometry. The proposed method is free of interference of other rare earths. The calibration graphs were linear up to 18 g/ml of neodymium and 21 g/ml of erbium (in the final solution). The derivative molar absorptivities are 395 l.mol^–1.cm^–1 for neodymium and 3421.mol^–1.cm^–1 for erbium. The corresponding values of Sandell's sensitivity were 0.36 and 0.49 g.cm^–1, respectively. The relative standard deviations evaluated from ten independent determinations of 2.5 g/ml of neodymium and erbium are 1.5 and 3.8% for neodymium and 1.8 and 4.1% for erbium in absence and presence of 70 g of lanthanum, respectively. The detection limits (signal to noise ratio=2) are 0.23 g/ml for neodymium and 0.30 g/ml for erbium. The method has been used for the determination of neodymium and erbium in mixed rare earths with satisfactory results.     

Untersuchungen zur Bestimmung von Spurenelementen in Blutserum mit Hilfe der Totalreflexions-R?ntgenfluoreszenzanalyse

Summary The quantitative determination of trace elements in human blood serum by Total Reflection X-Ray Fluorescence Analysis (TXRF) is influenced by absorption- and reflection-effects caused by the organic (proteins) and inorganic (P, S, Na, K, Ca, Cl) matrices. To minimize these effects we have developed a sample preparation technique based on the decomposition of the organic matrix and followed by the separation of the trace elements from the organic matrix by ion-exchange. The described method enables the simultaneous determination of K (1584 g), Ca (666 g), Fe (22 g), Cu (9.6 g), Zn (8.8 g), Se (0.97 g), Sn (1.3 g), Pb (0.12 g) and Rb (1.6 g) (obtained values in parentheses).

---

---

Herrn Prof. Dr. G. Tölg zum 60. Geburtstag gewidmet     

Catchment region partitioning of energy hypersurfaces,I

The space of internal coordinates of a molecular system is partitioned into catchment regions of various critical points of the energy hypersurface. The partitioning is based on an ordering of steepest descent paths into equivalence classes. The properties of these catchment regions and their boundaries are analyzed and the concepts of chemical structure, reaction path and reaction mechanism are discussed within the framework of the Born-Oppenheimer and energy hypersurface approximations. Relations between catchment regions and the chemically important reactive domains of energy hypersurfaces, as well as models for branching of reaction mechanisms, caused by instability domainsD , 1, are investigated.     

Reactions of dodecacarbonyltriruthenium with α,β-unsaturated ketones. Crystal and molecular structures of two reaction products

The thermal reactions of Ru₃(CO)₁₂ with RCOCH=CHPh (R=Me, p-MeC₆H₄) in hydrocarbon solvents lead to the formation of a series of complexes, several of which have been isolated as individual compounds by chromatography. The dinuclear complex Ru₂(-H)(CO)₆(-MeCOCH=CPh) and the tetranuclear complex Ru₄(-H)(-CO)(CO)₇(p-MeC ₆H₄ COCH=CPh)(-p-MeC₆H₄COCH=CPh)(₄-p-MeC₆H₃COCH=CHPh) are characterized by an X-ray structural study. The structures of other reaction products are discussed on the basis of spectral data. The reactions are accompanied by reduction of the starting enones to the corresponding unsaturated ketones.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1285–1293, July, 1993.     

Determination of ochratoxin A in wine by liquid chromatography tandem mass spectrometry after combined anion-exchange/reversed-phase clean-up

Ochratoxin A (OTA) is a mycotoxin produced by Aspergillus ochraceus and Penicillium verrucosum. It has been found and analysed in several foods and feeds. Owing to its toxicity and occurrence in food and feed, the European Community has issued directives and some countries have their own regulations for OTA contents in food, feed and beverages. This work describes a method for the determination of OTA in mulled and red wine. It is based on combined anion exchange/reversed-phase clean-up and was analysed by liquid chromatography coupled with tandem mass spectrometry (multiple reaction monitoring). The method was validated with natural contaminated and spiked wine samples with OTA contents from 1.34 to 3.48 g kg^–1. Owing to its accuracy, good reproducibility and repeatability, this easy method is a good alternative to liquid chromatography–fluorescence detection methods.     

Preparation of micron-size monodisperse polymer microspheres having cationic groups

Micron-size monodisperse crosslinked polymer microspheres having chloromethyl groups were prepared by seeded copolymerization of styrene, divinylbenzene, and chloromethylstyrene in the presence of 2.1- monodisperse polystyrene seed particles produced by dispersion polymerization. The modification reaction of chloromethyl groups on the surfaces with polyamines such as triethylenetetramine and ethylenediamine was carried out. From the measurements of potential and the amount of chloride ion released, the introduction of a large number of cationic groups at the surfaces was confirmed.Part CXXXI of the series Studies on suspension and Emulsion.     

Anwendung der Ringofenmethode zum Nachweis einiger Heteroelemente in organischen Verbindungen

Zusammenfassung Ein schnelles und einfaches Mikroverfahren zum Nachweis einiger Heteroatome organischer Verbindungen wurde entwickelt. Nach Aufschluß mit metallischem Kalium werden die entstehenden Ionen mit der Ringofenmethode getrennt und mit empfindlichen Reaktionen nachgewiesen. Nachweisgrenze: 0,5 bis 1g Stickstoff, 1 bis 2g Schwefel, 2 bis 3g Jod, 4 bis 5g Brom, 5 bis 10g Chlor in 0,5 bis 1 mg Einwaage.

---

Summary A rapid and simple micromethod was developed for the detection of several hetero-elements in organic compounds. After breaking down the sample with metallic potassium, the resulting ions are separated by the ring oven method and detected by means of sensitive reagents. Detection limits: 0.5 to 1g nitrogen, 1 to 2g sulfur, 2 to 3g iodine, 4 to 5g bromine, 5 to 10g chlorine in samples weighing 0.5 to 1 mg.

---

Résumé On a découvert un procédé à l'échelle micro, simple et rapide, pour rechercher certains hétéroéléments dans les composés organiques. Après mise en solution par le potassium métallique, on sépare les ions formés suivant la méthode du four annulaire et l'on effectue la recherche au moyen de réactions sensibles. Limite de dilution: 0,5 à 1g d'azote, 1 àg de soufre, 2 àg d'iode, 5 à 10g de chlore sur 0,5 à 1 mg de prise d'essai.

     

A technique for capillary joining in capillary electrophoresis

Summary Aspects of cracking and joining capillaries have been investigated. Capillary coupling was achieved using various methods. The most successful used hydrofluoric acid-etched capillaries to form male and female ends which were then joined together. This type of joint was used to connect sections of capillary of similar and different internal diameters with minimal loss in resolution, peak width and number of theoretical plates. (Uridine and hypoxanthine was used as a test mixture). For hypoxanthine on a 50 m/50 m etched joined capillary 10 cm from the detector window the number of theoretical plates was 96.6% of that for hypoxanthine on an unbroken capillary. Following the relative success of capillary joining, a coupled capillary flowcell (50 m/200 m) was produced and evaluated.     

Selective hydrogenation of fatty oils on alloyed Ni?Al catalyst. I. Kinetic model

On the basis of literature data concerning the reaction mechanism, a kinetic model for the selective hydrogenation of cotton-seed oil on the S-3 commercial alloyed Ni–Al catalyst is suggested. Its parameters have been identified according to the experimental data obtained in an agitated slurry reactor at T=140–200°C and P=0.2–0.8 MPa.

---

, C-3. , , t=140–120°C, P=0.2–0.8 .

     

Separation of linear gramicidins using carbon dioxide-containing mobile phases

Packed-column supercritical-fluid chromatography (pSFC) is presented as a novel method for separating and analyzing gramicidin samples. By use of methanol-modified carbon dioxide as a mobile phase the pentadecapeptides gramicidin A (gA), gramicidin B (gB), and gramicidin C (gC) are readily separated and eluted from a PRP-1 poly(styrene–divinylbenzene) column. Although optimum separation conditions are typically achieved near a column temperature of 40°C, a column pressure of 11 MPa, and 30% methanol modifier, pressure and modifier gradients around these values are also found to improve the overall separation time. Measurements indicate that the mobile phase solubility of gramicidin under these conditions is 5.0±0.4 g mL^–1. Collection of individual peaks during chromatography achieved analytical-scale isolation of 2 g refined gC from 20 g injected gramicidin D. Further, supercritical-fluid extraction of 200 g gramicidin D from a Chromosorb 102 support packed into the vessel produced 57 g gA in 90% purity. The results establish that carbon dioxide-based mobile phases can be successfully used for the separation of individual gramicidin species.     

Cu-Chelex as a selective adsorbent for o-nitroso derivatives of phenolic substances

Summary Chelex resins in several metal forms were tested for selective uptake of o-nitrosonaphthols and o-nitrosophenols from aqueous solution. Cu-Chelex was the most efficient resin over a wide pH range, and the taken-up nitroso compounds were effectively eluted with concentrated ammonia: acetonitrile (4:1, v/v) after washing the resin with acetonitrile to eliminate non-specific binding. The upper and lower limits of uptake capacity of the resin for 1-nitroso-2-naphthol were 0.5 mol/100 mg and 1.25 mol/100 mg, respectively. A preliminary recovery experiment using urine and cucumber juice showed that Cu-Chelex would be useful for screening of o-nitroso derivatives of phenolic substances in complicated samples such as biological fluids and foods.     

Semiquantitative estimation of the mycotoxins citrinin, Ochratoxin A, Aflatoxin M1 and penicillic acid on thin-layer chromatograms with a grey scale

Summary Spots of citrinin, ochratoxin A, aflatoxin M₁ and penicillic acid on thin-layer chromatograms can be semi-quantitatively estimated by using a grey scale, commonly used in photo laboratories. The detection limits are 0.01 g for citrinin, 0.006 g for ochratoxin A, 0.002 g for aflatoxin M₁ and 0.01 g for penicillic acid. Standard curves for these mycotoxins are given.

---

Halbquantitative Bestimmung der Mycotoxine Citrinin, Ochratoxin A, Aflatoxin M₁ und Penicillinsäure auf Dünnschicht-Chromatogrammen mit Hilfe eines Graukeils

Zusammenfassung Mit Hilfe eines in Photolabors gebräuchlichen Graukeils können dünnschicht-chromatographische Flecke der obengenannten Mycotoxine halbquantitativ bestimmt werden. Die Nachweisgrenzen betragen 0,01 g für Citrinin, 0,006 g für Ochratoxin A, 0,002 g für Aflatoxin M₁ und 0,01 g für Penicillinsäure. Eichkurven werden angegeben.

     

Synthesis,characterization and crystal structures of heterometallic trinuclear carbonyl sulfido clusters (η5-Cp)MoFeCo- (CO)8(μ3-S) and [(η5-Cp)Mo]2Fe(CO)7(μ3-S)

HFe2Co(CO)9(3-S) reacts with (5-Cp)Mo(CO)3Cl in refluxing THF to give heterometallic trinuclear clusters (5-Cp)MoFeCo(CO)8(3-S) and [(5-Cp)Mo]2Fe(CO)7-(3-S), which have been characterized by elemental analyses, i.r., 1H- and 13C-n.m.r. and X-ray crystal structure determination. An electrophilic addition–elimination sequence is proposed for their formation.     

Separation of noble metals by circular thin-layer chromatography

Summary A method has been described for the separation and identification of noble metals by circular thin-layer chromatography. The method is simple and convenient and separation is complete within 2 min. Best results have been obtained on alumina layers with acetone/aoetylacetone/2 M hydrochloric acid (100103) as solvent mixture. Reagents used for detection were rubeanic acid, thiourea, and stannous chloride. The following elements could be detected with sensitivities ranging from 0.1 g to 3.0 g: Rh, Ru, Pt, Au, Os, Pd, Ir, and Cu. Interferences are caused by Ni, Go, Mn, and Fe, yet it is possible to distinguish these from the noble metals on separate chromatograms.

---

Zusammenfassung Zur Trennung und Identifizierung von Edelmetallen wird das Verfahren der Zirktdar-Dünnschichtchromatographie empfohlen. Die Methode ist einfach durchzuführen und erfordert nur 2 min für eine vollständige Trennung. Am besten hat sich ein Lösungsmittel aus Aceton, Acetylaceton und 2 m Salzsäure (100103) und Aluminiumoxid als Dünnschichtmaterial bewährt. Als Nachweisreagentien werden Rubeanwasserstoff, Thioharnstoff und Zinn(II)-chlorid verwendet. Folgende Elemente wurden mit Empfindlichkeiten zwischen 0,1 und 3,0 g erfaßt: Rh, Ru, Pt, Au, Os, Pd, Ir und Cu. Störungen wurden durch Ni, Co, Mn und Fe verursacht, jedoch können diese von den Edelmetallen auf getrennten Chromatogrammen unterschieden werden.

     

Modified method for filling micro-HPLC-columns

Summary A new method is introduced for packing micro-columns with an ID (inner diameter) of 320 m. The advantage of this method is the extraordinary economy of the packing material employed and the high reliability in production. The theoretical plate height ranges from 7 to 8 m for 3 m particles.     

Trace analysis of cationic surfactants in water using HPLC with conductometric detection

Summary A simple and fast determination of trace amounts of commercially used cationic surfactants is described. After extraction from water cationic surfactants are separated by HPLC and detected by conductometry. The detection limit is 3 g/l for distearyldimethylammonium chloride, 16 g/l for ditallowimidazolinium methosulphate, and 6 g/l for dodecylpyridinium chloride.