Probing the ruthenium-cumulene bonding interaction: synthesis and spectroscopic studies of vinylidene- and allenylidene-ruthenium complexes supported by tetradentate macrocyclic tertiary amine and comparisons with diphosphine analogues of ruthenium and osmium

The synthesis and spectroscopic properties of trans-[Cl(16-TMC)Ru[double bond]C[double bond]CHR]PF(6) (16-TMC = 1,5,9,13-tetramethyl-1,5,9,13-tetraazacyclohexadecane, R = C(6)H(4)X-4, X = H (1), Cl (2), Me (3), OMe (4); R = CHPh(2) (5)), trans-[Cl(16-TMC)Ru[double bond]C[double bond]C[double bond]C(C(6)H(4)X-4)(2)]PF(6) (X = H (6), Cl (7), Me (8), OMe (9)), and trans-[Cl(dppm)(2)M[double bond]C[double bond]C[double bond]C(C(6)H(4)X-4)(2)]PF(6) (M = Ru, X = H (10), Cl (11), Me (12); M = Os, X = H (13), Cl (14), Me (15)) are described. The crystal structures of 1, 5, 6, and 8 show that the Ru-C(alpha) and C(alpha)-C(beta) distances of the allenylidene complexes fall between those of the vinylidene and acetylide relatives. Two reversible redox couples are observed by cyclic voltammetry for 6-9, with E(1/2) values ranging from -1.19 to -1.42 and 0.49 to 0.70 V vs Cp(2)Fe(+/0), and they are both 0.2-0.3 and 0.1-0.2 V more reducing than those for 10-12 and 13-15, respectively. The UV-vis spectra of the vinylidene complexes 1-4 are dominated by intense high-energy bands at lambda(max) < or = 310 nm (epsilon(max) > or = 10(4) dm(3) mol(-1) cm(-1)), while weak absorptions at lambda(max) > or = 400 nm (epsilon(max) < or = 10(2) dm(3) mol(-1) cm(-1)) are tentatively assigned to d-d transitions. The resonance Raman spectrum of 5 contains a nominal nu(C[double bond]C) stretch mode of the vinylidene ligand at 1629 cm(-1). The electronic absorption spectra of the allenylidene complexes 6-9 exhibit an intense absorption at lambda(max) = 479-513 nm (epsilon(max) = (2-3) x 10(4) dm(3) mol(-1) cm(-1)). Similar electronic absorption bands have been found for 10-12, but the lowest energy dipole-allowed transition is blue-shifted by 1530-1830 cm(-1) for the Os analogues 13-15. Ab initio calculations have been performed on the ground state of trans-[Cl(NH(3))(4)Ru[double bond]C[double bond]C[double bond]CPh(2)](+) at the MP2 level, and imply that the HOMO is not localized purely on the metal center or allenylidene ligand. The absorption band of 6 at lambda(max) = 479 nm has been probed by resonance Raman spectroscopy. Simulations of the absorption band and the resonance Raman intensities show that the nominal nu(C[double bond]C[double bond]C) stretch mode accounts for ca. 50% of the total vibrational reorganization energy, indicating that this absorption band is strongly coupled to the allenylidene moiety. The excited-state reorganization of the allenylidene ligand is accompanied by rearrangement of the Ru[double bond]C and Ru[bond]N (of 16-TMC) fragments, which supports the existence of bonding interaction between the metal and C[double bond]C[double bond]C unit in the electronic excited state.     

Synthesis, electrochemistry, and spectroscopic characterization of bis-dirhodium complexes linked by axial ligands

The synthesis and electrochemical and spectroscopic properties of bis-dirhodium complexes containing ap or dpf bridging ligands, (ap)(4)Rh(2)(C triple bond C)(2)Rh(2)(ap)(4) (2) and (dpf)(4)Rh(2)(CNC(6)H(4)NC)Rh(2)(dpf)(4) (4), were investigated (where ap and dpf are the 2-anilinopyridinate and N,N'-diphenylformamidinate ions, respectively). The related "simple" dirhodium species, (ap)(4)Rh(2)(C triple bond C)(2)Si(CH(3))(3) (1) and (dpf)(4)Rh(2)(CNC(6)H(5)) (3), with the same set of bridging ligands were also synthesized and their properties compared to those of the analogous bis-dirhodium complexes. Compound 1 was obtained by mixing (ap)(4)Rh(2)Cl and Li(C triple bond C)(2)Si(CH(3))(3) in refluxing THF for 16 h under vacuum while compound 2 was prepared by a reaction between (ap)(4)Rh(2)(C triple bond C)(2)Li and (ap)(4)Rh(2)Cl under similar conditions. The reaction between (CF(3)COO)(4)Rh(2) and molten Hdpf under vacuum for 24 h leads to the generation of compound 3 with a yield of 65%. The red-orange compound 4 was obtained upon addition of 0.5 equiv of CNC(6)H(4)NC at room temperature to a CH(2)Cl(2) solution containing (dpf)(4)Rh(2) which was synthesized according to a method described previously in the literature. Compound 1 crystallizes in the triclinic space group P1, with a = 10.164(3) A, b = 13.881(3) A, c = 18.805(4) A, alpha = 73.55(2) degrees, beta = 77.89(2) degrees, gamma = 84.85(2) degrees, and Z = 2. Crystals of 2 were not good enough to collect adequate data for X-ray analysis, but the identity of this compound was confirmed, along with its P1; space group. Crystals of 3 and 4 belong to the monoclinic, P2(1)/c space group and the triclinic, P1; space group, respectively, with a = 13.5254(5) A, b = 13.7387(4) A, c = 27.2011(12) A, beta = 102.637(2) degrees, and Z = 4 for 3 and a = 13.866(8) A, b = 14.756(7) A, c = 15.008(6) A, alpha = 79.91(3) degrees, beta = 87.72(4) degrees, gamma = 89.19(4) degrees, and Z = 1 for 4. Compound 1 exhibits a single reversible oxidation at E(1/2) = 0.66 V and a single reversible reduction at E(1/2) = -0.44 V vs SCE in THF, 0.2 M TBAP. Both processes involve a one-electron transfer. Compound 2 undergoes a reversible oxidation at E(1/2) = 0.60 V and two separate one-electron-transfer reductions at E(1/2) = -0.52 and -0.65 V in THF, 0.2 M TBAP. The oxidation involves two overlapped one-electron-transfer processes. Compounds 3 and 4 undergo two reversible oxidations in CH(2)Cl(2), 0.1 M TBAP located at E(1/2) = 0.23 and 1.22 V (3) or 0.22 and 1.20 V (4). Each redox reaction of 3 involves a one-electron-transfer step while each redox reaction of 4 involves two overlapping one-electron transfers. Compound 2 shows interaction between the two dirhodium cores upon reduction, while 4 gives no evidence of electronic interaction between the two dirhodium units during either reduction or oxidation. An ESR signal with axial symmetry was obtained for the neutral compounds 1 and 2, and a similar spectrum was obtained for the singly oxidized products of compounds 3 and 4, thus suggesting the electronic configuration of (sigma)(2)(pi)(4)(delta)(2)(pi)(4)(delta)(1) for the neutral compounds 1 and 2 as well as for the oxidized compounds 3 and 4. The four compounds were also characterized by FTIR and UV-visible spectroscopy as well as by mass spectrometry.     

Spectroscopic studies and structures of trans-ruthenium(II) and ruthenium(III) bis(cyanide) complexes supported by a tetradentate macrocyclic tertiary amine ligand

trans-[Ru(16-TMC)(C[triple bond]N)2] (1; 16-TMC = 1,5,9,13-tetramethyl-1,5,9,13-tetraazacyclohexadecane) was prepared by the reaction of trans-[Ru(16-TMC)Cl2]Cl with KCN in the presence of zinc powder. The oxidation of 1 with bromine gave trans-[Ru(16-TMC)(CN)2]+ isolated as PF6 salt (2.PF6). The Ru-C/C-N distances are 2.061(4)/1.130(5) and 2.069(5)/1.140(7) A for 1 and 2, respectively. Both complexes show a Ru(III/II) couple at 0.10 V versus FeCp2+/0. The UV-vis absorption spectrum of 1 is dominated by an intense high-energy absorption at lambda(max) = 230 nm, which is mainly originated from dpi(RuII) --> pi*(N[triple bond]C-Ru-C[triple bond]N) charge-transfer transition. Complex 2 shows intense absorption bands at lambda(max) pi*(N[triple bond]C-Ru-C[triple bond]N) and sigma(-CN) --> d(RuIII) charge-transfer transition, respectively. Density functional theory and time-dependent density-functional theory calculations have been performed on trans-[(NH3)4Ru(C[triple bond]N)2] (1') and trans-[(NH3)4Ru(C[triple bond]N)2]+ (2') to examine the Ru-cyanide interaction and the nature of associated electronic transition(s). The 230 nm band of 1 has been probed by resonance Raman spectroscopy. Simulations of the absorption band and the resonance Raman intensities show that the nominal nuC[triple bond]N stretch mode accounts for ca. 66% of the total vibrational reorganization energy. A change of nominal bond order for the cyanide ligand from 3 to 2.5 is estimated upon the electronic excitation.     

Nickel(II) complexes with different chromospheres containing macrocyclic ligands: spectroscopic and electrochemical studies

The mixed donor tetradentate (L(1)=N(2)O(2)) and pentadentate (L(2)=N(2)O(2)S) ligands have been prepared by the interaction of 1,3-diaminopropane and thiodiglycolic acid with diamine. These ligands possess two dissimilar coordination sites. Different types of complexes were obtained which have different stoichiometry depending upon the type of ligands. Their structural investigation have been based on elemental analysis, magnetic moment and spectral (ultraviolet, infrared, (1)H NMR, (13)C NMR and mass spectroscopy methods). The Ni(II) complexes show magnetic moments corresponding to two unpaired electrons except [Ni(L(1))](NO(3))(2) which is diamagnetic. Ligand field parameters of these complexes were compared. N(2)O(2)S donor ligand complexes show higher values of ligand field parameters, which are used to detect their geometries. The redox properties and stability of the complexes toward oxidation waves explored by cyclic voltammetry are related to the electron-withdrawing or releasing ability of the substituents of macrocyclic ligands moiety. The Ni(II) complexes displayed Ni(II)/Ni(I) couples irreversible waves associated with Ni(III)/Ni(II) process.     

Synthesis, spectroscopic studies and electrochemistry of palladium (II) macrocyclic complexes derived from a new tetraazahalogen substituted ligands by template method and their antimicrobial and pesticidal activities

A new series of Pd(II) macrocyclic complexes have been synthesized by template condensation of bis(benzil)4-chloro 1,2-phenylenediamine (ML1) and bis(benzil)4-fluro 1,2-phenylenediamine (ML2) respectively, with appropriate diamine i.e. 1,2-phenylenediamine, 4-chloro 1,2-phenylenediamine and 4-fluro 1,2-phenylenediamine in the presence of PdCl2 to form complexes of the type [Pd(C40H26N4ClF)]Cl2, [Pd(C40H27N4X)]Cl2 and [Pd(C40H26N4X2)]Cl2, where X=Cl, F. The complexes have been characterized with the help of elemental analysis, IR, 1H NMR, electronic spectra, conductance measurement, magnetic susceptibility, cyclic voltammetry and X-ray powder diffraction studies. On the basis of these studies a square planar geometry has been proposed around the metal ion. The newly synthesized ligands and their complexes have been screened for antimicrobial and pesticidal activities. The results obtained from bioassays indicate that this class of compounds can be utilized for the design of new substance with pesticidal activity and promising antimicrobial activity.     

Tetraaza macrocyclic complexes: synthesis,spectral and antimicrobial studies

A tetradentate nitrogen donor [N₄] macrocyclic ligand, 1,3,7,9-tetraaza-2,8-dithia-4,10-dimethyl-6,12-diphenylcyclododeca-4,6,10,12-tetraene has been synthesized by using thiourea and benzoylacetone. Complexes of Mn(II), Co(II), Ni(II), and Cu(II) have been synthesized with this ligand and characterized by element chemical analysis, molar conductance, magnetic susceptibility, mass, ¹H nuclear magnetic resonance, Fourier transform–infrared, electronic, and electron paramagnetic resonance spectral studies. The molar conductance measurements of Mn(II), Co(II), and Cu(II) complexes in dimethyformamide correspond to nonelectrolytes, whereas Ni(II) complex is a 1: 2 electrolyte. The complexes are high-spin except for Ni(II) which is diamagnetic. Octahedral geometry has been assigned for Mn(II) and Co(II) complexes, square planar for Ni(II) and tetragonal geometry for Cu(II). The ligand and its complexes were screened in vitro against two pathogenic fungi (Fusarium moniliformae and Rhizoctonia solani) and bacteria (Staphylococcus aureus and Pseudomonas aeruginosa) to assess their growth inhibiting potential.     

Template synthesis, spectroscopic studies and biological screening of macrocyclic complexes derived from thiocarbohydrazide and benzil

A novel series of complexes of the type [M(TML)X₂]; where TML is a tetradentate macrocyclic ligand; M = Co(II), Ni(II), Cu(II) or Zn(II); X = Cl⁻, CH₃COO⁻ or NO ₃ ⁻ have been synthesized by template condensation of benzil and thiocarbohydrazide in the presence of divalent metal salts in methanolic medium. The complexes have been characterized with the help of elemental analyses, conductance measurements, molecular weight determination, magnetic measurements, electronic, NMR, infrared and far infrared spectral studies. Electronic spectra along with magnetic moments suggest the six coordinate octahedral geometry for these complexes. The low value of molar conductance indicates them to be non-electrolytes. The biological activities of metal complexes have been tested in vitro against a number of pathogenic bacteria to assess their inhibiting potential.     

Synthesis and spectroscopic studies of dinuclear copper(II) complexes with new pendant-armed macrocyclic ligands

Three dinuclear Cu^II perchlorate complexes of macrocyclic ligands derived from the condensation of sodium 4-X-2,6-diformylphenolate (X=Me, Cl or Bu^t) with 1,5-diamino-3-(8-methylquinolyl)azapentane were prepared by in situ transmetallation with Cu(ClO₄)₂ and characterized by physicochemical, spectroscopic and electrochemical methods.     

Tetranuclear palladium complexes with benzoquinonediimine ligands: synthesis, molecular structure and electrochemistry

Rare examples of tetrapalladated derivatives in which two flat tetradentate bridging ligands are perfectly face-to-face as a result of a remarkable ancillary ligand effect are reported.     

A family of oxorhenium(v) complexes incorporating chelated monoanionic ONN reduced Schiff base and dianionic ONNO tetradentate ligands: synthesis, spectroscopic and electrochemical studies

The green colored complexes of the type Re(V)O(L(SB))Cl(2), 1, have been synthesised by reacting NBu(4)[ReOCl(4)] with HL(SB) in dry ethanol. Here, L(SB)(-) are the deprotonated forms of N-(2-hydroxybenzyl)-2-picolylamine (HL(SB)(1)); N-(2-hydroxybenzyl)-N',N'-dimethylethylenediamine (HL(SB)(2)) and N-(2-hydroxybenzyl)-N',N'-diethylethylenediamine (HL(SB)(3)). Similarly, NBu(4)[ReOCl(4)] reacted with N,N-bis(2-hydroxybenzyl)-2-picolylamine (H(2)L(1)); N,N-bis(2-hydroxybenzyl)-N',N'-dimethylethylenediamine (H(2)L(2)); N,N-bis(2-hydroxybenzyl)-N',N'-diethylethylenediamine (H(2)L(3)); [N-(2-hydroxybenzyl)-N-(2-pyridylmethyl)]-2-aminoethanol (H(2)L(4)); [N-(2-hydroxybenzyl)-N-(2-pyridylmethyl)]-2-methyl-2-amino-1-propanol (H(2)L(5)); N,N-bis(1-hydroxyethyl)-2-picolylamine (H(2)L(6)), to give the monochloro complexes Re(V)O(L)Cl, 2. The X-ray structures of the complexes are reported. The molecular structures observed in the solid state are preserved in solution ((1)H NMR). In acetonitrile solution the Re(V)O(L)Cl, 2, display a one-electron couple, Re(VI)O(L)Cl(+)-Re(V)O(L)Cl, near 1.0 V vs SCE. The electrogenerated hexavalent complexes [Re(VI)O(L)Cl]ClO(4), 3, are paramagnetic and display sextet EPR spectra in solution at room temperature (A(av) approximately 417 (G), g approximately 1.914).     

1,8-Dimethylnaphthalene-bridged diphosphine ligands: synthesis and structural comparison of their palladium complexes

The synthesis of a new series of ligands with a 1,8-dimethylnaphthalene backbone is reported, 1,8-(R2PCH2)2C10H6, where R = (t)Bu 1 (dbpn), (i)Pr 2 (dippn), Cy 3 (dchpn) and Ph 4 (dphpn). The ligand 1 is structurally characterised by X-ray crystallography. A comparative structural study of the respective (diphosphine)Pd(dba) and (diphosphine)PdCl2 complexes is carried out, comparing the X-ray crystal structures of complexes 6, 7, 8, 10, 11 and 12. It is shown that the geometry at the metal is affected by not only ligand demands, but also by the palladium oxidation state and the electronic properties of the ligands. Two qualitative stability series are also identified: 9 < 10 < 11 approximately 12 is observed, and P2Pd(dba) complexes are more stable than the corresponding P2PdCl2 complexes towards opening of the chelate ring. It is also concluded that the bite angle is heavily influenced by the electron donating properties of the ligand.     

Synthesis of cis and trans bis-alkynyl complexes of Cr(III) and Rh(III) supported by a tetradentate macrocyclic amine: a spectroscopic investigation of the M(III)-alkynyl interaction

Alkynyl complexes of the type [M(cyclam)(CCR)(2)]OTf (where cyclam = 1,4,8,11-tetraazacyclotetradecane; M = Rh(III) or Cr(III); and R = phenyl, 4-methylphenyl, 4-trifluoromethylphenyl, 4-fluorophenyl, 1-naphthalenyl, 9-phenanthrenyl, and cyclohexyl) were prepared in 49% to 93% yield using a one-pot synthesis involving the addition of 2 equiv of RCCH and 4 equiv of BuLi to the appropriate [M(cyclam)(OTf)(2)]OTf complex in THF. The cis and trans isomers of the alkynyl complexes were separated using solubility differences, and the stereochemistry was characterized using infrared spectroscopy of the CH(2) rocking and NH bending region. All of the trans-[M(cyclam)(CCR)(2)]OTf complexes exhibit strong Raman bands between 2071 and 2109 cm(-1), ascribed to ν(s)(C≡C). The stretching frequencies for the Cr(III) complexes are 21-28 cm(-1) lower than for the analogous Rh(III) complexes, a result that can be interpreted in terms of the alkynyl ligands acting as π-donors. UV-vis spectra of the Cr(III) and Rh(III) complexes are dominated by strong charge transfer (CT) transitions. In the case of the Rh(III) complexes, these CT transitions obscure the metal centered (MC) transitions, but in the case of the Cr(III) complexes the MC transitions are unobscured and appear between 320 and 500 nm, with extinction coefficients (170-700 L mol(-1) cm(-1)) indicative of intensity stealing from the proximal CT bands. The Cr(III) complexes show long-lived (240-327 μs), structureless, MC emission centered between 731 and 748 nm in degassed room temperature aqueous solution. Emission characteristics are also consistent with the arylalkynyl ligands acting as π-donors. The Rh(III) complexes also display long-lived (4-21 μs), structureless, metal centered emission centered between 524 and 548 nm in degassed room temperature solution (CH(3)CN).     

Synthesis and spectroscopic studies of mixed-ligand and polymeric dinuclear transition metal complexes with bis-acylhydrazone tetradentate ligands and 1,10-phenanthroline

Two types of dinuclear copper(II) and nickel(II) complexes with two tetradentate N2O2 donor ligands 1,4-bis(1-anthranoylhydrazonoethyl)benzene (L1), 1,4-bis(1-salicyloylhydrazonoethyl)benzene (L2) and N,N'-bidentate heterocyclic base [1,10-phenonthroline (phen)] have been synthesized and characterized by elemental analysis, infrared spectra, UV-vis electronic absorption spectra and magnetic susceptibility measurements. The reaction of metal(II) acetates with the solution containing ligand and 1,10-phenonthroline in methanol gives mixed-ligand dinuclear metal(II) complexes with general formula [M2L(phen)2]Cl2 (L=L1 or L2), whereas, the ligands react with metal(II) acetates to form polymeric dinuclear complexes with general formula [(M2L2)n] (L=L1 or L2). In the complexes, the ligands act as dianionic tetradentate and coordination takes place in the enol tautomeric form with the enolic oxygen and azomethine nitrogen atoms while the phenolic hydroxyl and amino groups of aroylhydrazone moiety do not participate in coordination. The effect of varying pH and solvent on the absorption behavior of both ligands and complexes has been investigated.     

Chromium(III) complexes of polydentate and macrocyclic selenoethers—synthesis, spectroscopic and exafs studies

The reaction of [CrX₃(thf)₃] (X = Cl or Br) with the isometric triselenoethers MeC(CH₂SeMe)₃ and Se(CH₂CH₂CH₂SeMe)₂ (L) forms the very moisture sensitive [CrX₃L] complexes. The macrocycle [16]aneSe₄ (1,5,9,13-tetraselenacyclohexadecane) forms [CrX₂([16]aneSe₄)]PF₆. The complexes have been characterized by analysis, IR and UV-visible spectroscopy and electrospray mass spectrometry. The UV-visible spectra have been analysed and the low 10Dq and large B values, are consistent with weak binding of the soft selenium ligands to the hard Cr^III. Chromium K-edge EXAFS data has been recorded and analysed for the chromium chloride complexes to produce Cr---Se and Cr---Cl distances, which provide further strong evidence for weak Cr^III-selenoether interactions.     

Nucleophilic reactivity of a series of peroxomanganese(III) complexes supported by tetradentate aminopyridyl ligands

Peroxomanganese(iii) adducts have been postulated as important intermediates in manganese-containing enzymes and small molecule oxidation catalysts. Synthetic peroxomanganese(iii) complexes are known to be nucleophilic and facilitate aldehyde deformylation, offering a convenient way to compare relative reactivities of complexes supported by different ligands. In this work, tetradentate dipyridyldiazacycloalkane ligands with systematically perturbed steric and electronic properties were used to generate a series of manganese(ii) and peroxomanganese(iii) complexes. X-Ray crystal structures of five manganese(ii) complexes all show the ligands bound to give trans complexes. Treatment of these Mn(II) precursors with H(2)O(2) and Et(3)N in MeCN at -40 °C results in the formation of peroxomanganese(iii) complexes that differ only in the identity of the pyridine ring substituent and/or the number of carbons in the diazacycloalkane backbone. To determine the effects of small ligand perturbations on the reactivity of the peroxo group, the more thermally stable peroxomanganese(iii) complexes were reacted with cyclohexanecarboxaldehyde. For these complexes, the rate of deformylation does not correlate with the expected nucleophilicity of the peroxomanganese(iii) unit, as the inclusion of methyl substituents on the pyridines affords slower deformylation rates. It is proposed that adding methyl-substituents to the pyridines, or increasing the number of carbons on the diazacycloalkane, sterically hinders nucleophilic attack of the peroxo ligand on the carbonyl carbon of the aldehyde.     

Binuclear transition metal complexes of bicompartmental SNO donor ligands: synthesis,characterization, and electrochemistry

A series of new binucleating Co^II, Ni^II, Cu^II, and Zn^II complexes of bicompartmental ligands with SNO donors was prepared. The Schiff bases were obtained by the condensation of 4,6-diacetylresorcinol and mercapto-substituted 1,2,4-triazoles. The ligands and their complexes were characterized by elemental analysis, infrared, ¹H-NMR, UV-Vis, FAB-mass, and ESR spectral studies, magnetic susceptibility, and conductivity measurements. All the complexes were monomeric and binuclear. Ni^II and Co^II complexes were octahedral, whereas Cu^II and Zn^II complexes were square planar and tetrahedral, respectively. The compounds are investigated for electrochemical activity.     

Synthesis,characterization, and spectroscopic studies of tetradentate Schiff base chromium(III) complexes

Eight chromium(III) complexes of tetradentate Schiff bases have been prepared in situ by condensing of a substituted salicylaldehyde compound with ethylenediamine. These were characterized by elemental analysis, m.p., IR, molar conductivity, magnetic moment measurements, and electronic spectra. The free ligands were also characterized by ¹H and ¹³C NMR spectra. The ¹³C NMR spectra are discussed in terms of possible substituent effects. The IR and electronic spectra of the free ligand and the complexes are compared and discussed. The electrospray ionization (ESI) mass spectra of four free ligands and their complexes were measured. The deconvolution of the visible spectra of the complexes, C_2v symmetry, in DMSO yields three peaks at ca. 15 600–17 600, 18 400–20 400 and 20 000–23 100, and are assigned to the three d–d transitions, ⁴B_1g → ⁴E_g(⁴T_2g); ⁴B_1g → ⁴B_2g(⁴T_2g); ⁴B_1g → ⁴E_g(⁴T_1g), respectively. The complexes showed magnetic moment in the range of 3.5–4.2 BM which corresponds to three unpaired electrons.     

Probing kinase activities by electrochemistry, contact-angle measurements, and molecular-force interactions

Three different methods to investigate the activity of a protein kinase (casein kinase, CK2) are described. The phosphorylation of the sequence-specific peptide (1) by CK2 was monitored by electrochemical impedance spectroscopy (EIS). Phosphorylation of the peptide monolayer assembled on a Au electrode yields a negatively charged surface that electrostatically repels the negatively charged redox label [Fe(CN)6]3-/4-, thus increasing the interfacial electron-transfer resistance. The phosphorylation process by CK2 is further amplified by the association of the anti-phosphorylated peptide antibody to the monolayer. Binding of the antibody insulates the electrode surface, thus increasing the interfacial electron-transfer resistance in the presence of the redox label. This method enabled the quantitative analysis of the concentration of CK2 with a detection limit of ten units. The second method employed involved contact-angle measurements. Although the peptide 1-functionalized electrode revealed a contact angle of 67.5 degrees , phosphorylation of the peptide yielded a surface with enhanced hydrophilicity, 36.8 degrees. The biocatalyzed cleavage of the phosphate units with alkaline phosphatase regenerates the hydrophobic peptide monolayer, contact angle 55.3 degrees . The third method to characterize the CK2 system involved chemical force measurements between the phosphorylated peptide monolayer associated with the Au surface and a Au tip functionalized with the anti-phosphorylated peptide antibody. Although no significant rupture forces existed between the modified tip and the 1-functionalized surface (6+/-2 pN), significant rupture forces (multiples of 120+/-20 pN) were observed between the phosphorylated monolayer-modified surface and the antibody-functionalized tip. This rupture force is attributed to the dissociation of a simple binding event between the phosphorylated peptide and the fluorescent antibody (Fab) binding region.     

Ruthenium(II) complexes with ferrocene-modified arene ligands: synthesis and electrochemistry

A series of arene-ruthenium complexes of the general formula [RuCl₂{η⁶-C₆H₅(CH₂)₂R}L] with R=OH, CH₂OH, OC(O)Fc, CH₂OC(O)Fc (Fc=ferrocenyl) and L=PPh₃, (diphenylphosphino)ferrocene, or bridging 1,1^′-bis(diphenylphosphino)ferrocene, have been synthesized. Two synthetic pathways have been used for these ferrocene-modified arene-ruthenium complexes: (a) esterification of ferrocene carboxylic acid with 2-(cyclohexa-1,4-dienyl)ethanol, followed by condensation with RuCl₃ · nH₂O to afford [RuCl₂{η⁶-C₆H₅(CH₂)₂OC(O)Fc}]₂, and (b) esterification between ferrocene carboxylic acid and [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}L] to give [RuCl₂{η⁶-C₆H₅(CH₂)₃OC(O)Fc}L]. All new compounds have been characterized by NMR and IR spectroscopy as well as by mass spectrometry. The single-crystal X-ray structure analysis of [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}(PPh₃)] shows that the presence of a CH₂CH₂CH₂OH side-arm allows [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}(PPh₃)] to form an intramolecular hydrogen bond with a chlorine atom. The electrochemical behavior of selected representative compounds has been studied. Complexes with ferrocenylated side arms display the expected cyclic voltammograms, two independent reversible one-electron waves of the Ru(II)/Ru(III) and Fe(II)/Fe(III) redox couples. Introduction of a ferrocenylphosphine onto the ruthenium is reflected by an additonal reversible, one-electron wave due to ferrocene/ferrocenium system which is, however, coupled with the Ru(II)/Ru(III) redox system.