两种碳材料混合填充聚合物复合材料的导电特性及渗流阈值的计算模型

介绍了用碳纳米管与炭黑（或石墨）混合填充的聚合物复合材料的导电特性;阐述了混合填充聚合物体系的导电机理;介绍了基于线性混合规则和已占体积理论的渗流阈值的计算模型;分析了模型计算值与实验值的差异。利用已占体积理论,重新推导了混合填充体系渗流阈值的计算公式,并与文献公式做了比较。新公式表明：混合填充聚合物复合材料的渗流阈值...     

纳米碳基材料在导电胶黏剂中的应用

具有导电、导热等功能的胶黏剂相对于普通胶黏剂具有更高的应用价值,在电子封装领域已得到了广泛应用,然而其成本受制于高体积含量的贵金属填料而无法有效降低。本文基于这些现状总结和分析了近些年来国内外对于解决这类问题的方法和最新研究成果,发现碳纳米管、石墨烯等纳米碳材料具有优异的力学、导电和导热能力,与金属填料复合可以降低10wt%~20 wt%的金属填料含量。特别地,碳纳米管作为一维纳米材料能够作为“桥梁”将导电金属填料相互连接起来,可有效提高胶黏剂的导电能力、热稳定性和力学性能,同时降低填料的导电导热阈值和制备成本。通过聚合物基体(如热塑性与热固性树脂)的优化与选择,胶黏剂的力学性能可得到进一步的改善,以便满足于柔性电子器件的封装要求。另外,我们认为通过化学方法制备纳米粒子高温固化后也可以烧结构筑导电导热网络,提高材料的性能。     

植物基多孔炭材料在超级电容器中的应用

植物基多孔炭具有发达的孔结构、大的表面积、较为成熟的制备工艺、丰富的来源、低廉的价格,是目前商业应用范围最广的超级电容器电极材料。然而在实际应用中仍然存在着质量/体积比容量较低、倍率性能差等问题。本文针对先进电容器件的高能量密度、优异功率性能的要求,首先介绍了近年来发展的植物基多孔炭的制备方法,讨论了植物前驱体的组成和结构对其产物结构的影响以及与其电化学性能之间的构效关系,特别总结了近年来植物基超大比表面积多孔炭、中孔炭、层次化多孔炭的制备方法和电容储能性能。针对大比表面积多孔炭用于超级电容器时的体积性能不佳这一关键问题,本文还总结了提高植物基多孔炭体积电化学性能的方法。最后,对植物基多孔电极材料存在的问题进行了分析与总结,并展望了其研究前景。     

碳纳米多孔宏观体在水体净化中的应用

碳纳米多孔宏观体是指由碳纳米材料自组装形成的宏观多孔材料。该材料保持了碳纳米材料大的比表面积及化学、热稳定性,对水体中的污染物,如油污、染料分子及重金属离子等具有良好的吸附性能。此外,该类材料具有宏观结构及稳定的机械性能,方便操作,且易实现所吸附物的回收及吸附材料的再生。因此,碳纳米多孔宏观体成为碳纳米材料研究和应用的热点。本文梳理了碳纳米多孔宏观体的制备及其在水处理中的应用,包括碳纳米多孔宏观体的制备、污染物吸附及材料再生等。首先对碳纳米多孔宏观体用于水体净化的背景进行了介绍,之后,按照组成单元不同,将碳纳米多孔宏观体按照碳纳米管多孔宏观体,石墨烯多孔宏观体,碳纳米纤维多孔宏观体及碳纳米粒子多孔宏观体进行了分类。第三部分,详细介绍了制备碳纳米多孔宏观体的三种常见方法并分别讨论了各种方法的优缺点及所制备产物的性质。第四部分,按照不同污染物种类讲述了碳纳米多孔宏观体在水体净化中的应用。最后,针对碳纳米多孔宏观体在水体吸附应用中存在的问题进行了分析及展望。     

聚乙烯/碳黑导电复合材料的导电性能

提出并验证了聚乙烯/碳黑(PE/CB)导电复合材料的网络导电性能和产生正温度系数(PTC)特性的原因,分析了加工过程、温度和辐射交联等后处理过程对其导电性能的影响.     

Automated Scanning Probe Microscopy as a New Tool for Combinatorial Polymer Research: Conductive Carbon Black/Poly(dimethylsiloxane) Composites

A systematic investigation into the surface properties of siloxane rubber/carbon black (CB) nanocomposites has been performed, using an automated scanning probe microscope. In this way the influence of CB concentration and curing rate of the siloxane rubber matrix on roughness and conductivity of the composites was studied. Decreasing the curing rate while keeping the CB concentration resulted in a decrease in both roughness and surface conductivity, which can be explained by an additional siloxane‐rubber layer formed during curing.

     

交流阻抗谱在聚乙烯/碳黑导电复合材料导电机理研究中的应用

用交流阻抗谱论证了聚乙烯/碳黑(PE/CB)导电复合材料的网络导电机理,分析了热处理过程对复合材料电性能的影响。通过在不同频率和低电压下测定热处理前后及不同长度的导电复合材料样品的导电能力(A)、导电方式(B)和电阻值(Ra Rc),证明了材料内部存在着直通碳链、小间隙的碳链和大间隙的碳链,呈现三维网络导电结构。     

Effect of Carbon Dots Concentration on Electrical and Optical Properties of Their Composites with a Conducting Polymer

CQD/PEDOT:PSS composites were prepared via the hydrothermal method from glucose carbon quantum dots (CQDs) and an aqueous solution of PEDOT:PSS conducting polymer and their electrical and optical properties were investigated. The morphology and structure of these samples were investigated by AFM, SEM, EDX, and EBSD. It was found that the CQDs and CQD/PEDOT:PSS composites had a globular structure with globule sizes of ~50–300 nm depending on the concentration of PEDOT:PSS in these composites. The temperature dependence of the resistivity was obtained for the CQD/PEDOT:PSS (3%, 5%, 50%) composites, which had a weak activation character. The charge transport mechanism was discussed. The dependence of the resistivity on the storage time of the CQD/PEDOT:PSS (3%, 5%, 50%) composites and pure PEDOT:PSS was obtained. It was noted that mixing CQDs with PEDOT:PSS allowed us to obtain better electrical and optical properties than pure CQDs. CQD/PEDOT:PSS (3%, 5%, 50%) composites are more conductive composites than pure CQDs, and the absorbance spectra of CQD/PEDOT:PSS composites are a synergistic effect of interaction between CQDs and PEDOT:PSS. We also note the better stability of the CQD/PEDOT:PSS (50%) composite than the pure PEDOT:PSS film. CQD/PEDOT:PSS (50%) composite is promising for use as stable hole transport layers in devices of flexible organic electronics.     

碳纳米管改性环氧树脂的导热和阻燃性能

以双酚A二缩水甘油醚(DGEBA)环氧树脂(Epoxy Resin,EP)为基体、甲基六氢苯酐(MHHPA)为固化剂、以多壁碳纳米管(MWCNTs)为添加剂制备了环氧树脂/碳纳米管纳米复合材料。通过对微观结构、玻璃化转变温度(Tg)、热失重、热导率和锥形量热测试结果分析,研究了质量分数少于1.5%的MWCNTs对环氧树脂的导热和阻燃性能影响,结果表明,MWCNTs质量分数为1.5%时,复合材料发生团聚;纳米复合材料随着MWCNTs质量分数的增加Tg值先增加后降低;失重5%时,对应的温度先增加后降低,残炭量增加;样品的热导率呈现先升高后降低的趋势,当MWCNTs质量分数为1%时,复合材料的热导率最大;MWCNTs加入后环氧树脂的总释热量减少,释烟量增加,阻燃性得到一定程度的提高。     

Nitrogen‐Doped Porous Graphitic Carbon as an Excellent Electrode Material for Advanced Supercapacitors

An advanced supercapacitor material based on nitrogen‐doped porous graphitic carbon (NPGC) with high a surface area was synthesized by means of a simple coordination–pyrolysis combination process, in which tetraethyl orthosilicate (TEOS), nickel nitrate, and glucose were adopted as porogent, graphitic catalyst precursor, and carbon source, respectively. In addition, melamine was selected as a nitrogen source owing to its nitrogen‐enriched structure and the strong interaction between the amine groups and the glucose unit. A low‐temperature treatment resulted in the formation of a NPGC precursor by combination of the catalytic precursor, hydrolyzed TEOS, and the melamine–glucose unit. Following pyrolysis and removal of the catalyst and porogent, the NPGC material showed excellent electrical conductivity owing to its high crystallinity, a large Brunauer–Emmett–Teller surface area (S_BET=1027 m² g^?1), and a high nitrogen level (7.72 wt %). The unusual microstructure of NPGC materials could provide electrochemical energy storage. The NPGC material, without the need for any conductive additives, showed excellent capacitive behavior (293 F g^?1 at 1 A g^?1), long‐term cycling stability, and high coulombic efficiency (>99.9 % over 5000 cycles) in KOH when used as an electrode. Notably, in a two‐electrode symmetric supercapacitor, NPGC energy densities as high as 8.1 and 47.5 Wh kg^?1, at a high power density (10.5 kW kg^?1), were achieved in 6 M KOH and 1 M Et₄NBF₄‐PC electrolytes, respectively. Thus, the synthesized NPGC material could be a highly promising electrode material for advanced supercapacitors and other conversion devices.     

Smart Poly(styrene)/Carbon Black Conductive Polymer Composites Films for Styrene Vapour Sensing

Conductive Polymer Composites (CPC) can be used to elaborate sensing elements able to detect solvent vapours at very low concentrations (some ppm). Our experiments have shown that combining atactic PS or syndiotactic PS to five carbon black of different specific surfaces, allows obtaining a wide range of electrical resistances and surface morphologies. The CPC films have been elaborated from solutions by spraying and spin coating, the former being more adequate to design sensitive films with tuneable electrical properties. The larger electrical responses were obtained with an initial resistance close to 10⁴ Ω. Our sensors gave a response for very low styrene concentration (some ppm) increasing as a function of vapour concentration.     

氯化钠模板诱导木质素基多孔炭的制备及其超级电容器性能

以木质素为碳源,氯化钠为模板,通过低温回流使木质素包覆在氯化钠外层,高温煅烧获得木质素基多孔炭,研究了其作为电极材料在超级电容器中的应用。 结果表明,改变煅烧温度可调控所得样品的孔结构,其比表面积在548~600 m²/g之间可变,且随着煅烧温度升高,比表面积和孔体积先增大后减少。 700 ℃煅烧所得样品具有最大的比表面积,并表现出最高的电容性能,其在6 mol/L KOH电解液中比电容可达252 F/g,有效面积电容高达31.2 μF/cm²,模板氯化钠可清洗分离并可循环利用。 提出了一种废弃物高附加值制备超级电容器用多孔炭的绿色方法。     

LDPE／CPE／炭黑三相复合导电体系的亚微形态和导电性能

对ＬＤＰＥ／ＣＰＥ／炭黑三相复合导电体系的亚微形态和导电性能进行了研究。实验发现,该体系的亚微形态在共混比ＬＤＰＥ／ＣＰＥ大于和小于５０／５０时为典型的“海－岛”结构,在５０／５０时,为两相连续交错“互锁”结构;在共混比大于５０／５０时,ＬＤＰＥ／ＣＰＥ炭黑复合体系的导电性能较单一的ＬＰＤＰＥ树脂与炭黑复合体系的高２－５个数量级。     

糖蜜基多孔碳球电极材料的制备及应用

以工业制糖的副产物糖蜜为新型碳源,替代传统多孔碳生产原料,制备出性能优异的多孔碳球超级电容器电极材料;探索了制备方法,优化了反应条件.利用全功能表面吸附仪、扫描电子显微镜及电化学方法对材料的结构、形貌和电化学性能进行了表征.结果表明,制得的多孔碳球比表面积高达2547 m~2/g,且展现出优异的双电层电容性(170.5 F/g).本研究可解决制糖企业对糖蜜无法大规模利用的问题,并为多孔碳的制备寻求新方法.     

竹基多孔碳材料的制备及其协同阻燃环氧树脂研究

以KOH为致孔剂,制备了竹基微孔多孔碳材料(PCM);将PCM与聚磷酸铵(APP)添加于环氧树脂(EP),研究了PCM协同APP阻燃EP复合材料的作用及机理.BET吸附、扫描电子显微镜(SEM)及X射线光电子能谱(XPS)分析显示,PCM6的比表面积、孔容、孔径分别为2063 m2/g、0.9 cm2/g、1.8 nm;粒径为1~5μm;表面存在C—C,C—O—,C O及COO—等活性基团.极限氧指数(LOI)、UL 94垂直燃烧及锥形量热仪(Cone)研究表明,0.8 wt%的PCM6与3.1 wt%的APP复合可使EP复合材料的LOI由24.6%提高到27.3%,热释放速率峰值降低45.4%,PCM6表现出良好的协同阻燃作用.热失重分析及XPS研究表明,PCM6提高了阻燃EP复合材料的热稳定性,催化APP释放NH3、H2O,加快了交联成炭的速度及热解产物焦磷酸(酯)的形成,由此揭示了PCM协同APP阻燃EP的作用机理.     

离子液体对硫-超导炭黑复合材料电化学性能的影响

以热处理方法由单质硫与超导炭黑制备硫含量为59%的硫-超导炭黑复合材料.X射线衍射、扫描电镜测试表明,单质硫均匀地分散在高比表面积的超导炭黑中.如于电解液中添加室温离子液体,则可有效减弱复合材料中多硫化物在电解液的穿梭效应,提高硫复合材料的电化学性能.充放电测试表明,该硫-超导炭黑复合材料在含有离子液体的电解液中循环50周后,容量仍保持483.6mAh/g.     

导电炭黑在聚丙烯/极性聚合物体系中的选择性分散及其对导电性能的影响

以聚丙烯(PP)和极性聚合物的共混物为基体材料,以导电炭黑为填料,通过熔融共混制备导电复合材料。探讨了导电炭黑在两相基体中的分散情况以及双基体各组分比例对复合体系结构形态和导电性能的影响。SEM测试结果表明:炭黑粒子选择性地分散在极性乙烯-丙烯酸共聚物(EAA)树脂或尼龙6(PA6)中。EAA相在PP基体中呈棒状伸长结构,且随着EAA树脂含量的增大,在PP基体中形成更多更为连续的棒状伸长结构,使体积电阻率迅速下降。当在体系中加入PA6,mPP/mPA6=80/20时,PA6在PP基体中形成相互连接的纤维状分散结构,显著降低了复合体系的体积电阻率。电性能测试结果表明:材料在相同导电炭黑含量下的体积电阻率相对单基体体系可降低3~7个数量级。     

改性炭黑及其增强橡胶的研究

从炭黑在橡胶中的应用出发,介绍了炭黑的结构、各种炭黑改性的方法以及改性炭黑对橡胶物理机械性能的影响。