Chitosan, a natural biopolymer, is an ideal candidate to prepare biomaterials capable of preventing microbial infections due to its antibacterial properties. Electrospinning is a versatile method ideally suited to process biopolymers with minimal impact on their physicochemical properties. However, fabrication parameters and post-processing routine can affect biological activity and, therefore, must be well adjusted. In this study, nanofibrous membranes were prepared using trifluoroacetic acid and dichloromethane and evaluated for physiochemical and antimicrobial properties. The use of such biomaterials as potential antibacterial agents was extensively studied in vitro using Staphylococcus aureus and Escherichia coli as test organisms. The antibacterial assay showed inhibition of bacterial growth and eradication of the planktonic cells of both E. coli and S. aureus in the liquid medium for up to 6 hrs. The quantitative assay showed a significant reduction in bacteria cell viability by nanofibers depending on the method of fabrication. The antibacterial properties of these biomaterials can be attributed to the structural modifications provided by co-solvent formulation and application of post-treatment procedure. Consequently, the proposed antimicrobial surface modification method is a promising technique to prepare biomaterials designed to induce antimicrobial resistance via antiadhesive capability and the biocide-releasing mechanism. 相似文献
Bacterial adhesion and subsequent biofilm formation on the surfaces of synthetic materials imposes a significant burden in various fields, which can lead to infections in patients or reduce the service life of industrial devices. Therefore, there is increasing interest in imbuing surfaces with antibacterial properties. Bioinspired superhydrophobic surfaces with high water contact angles (>150°) exhibit excellent surface repellency against contaminations, thereby preventing initial bacterial adhesion and inhibiting biofilm formation. However, conventional superhydrophobic surfaces typically lack long-term durability and are incapable of achieving persistent efficacy against bacterial adhesion. To overcome these limitations, in recent decades, dual-function superhydrophobic antibacterial surfaces with both bacteria-repelling and bacteria-killing properties have been developed by introducing bactericidal components. These surfaces have demonstrated improved long-term antibacterial performance in addressing the issues associated with surface-attached bacteria. This review summarizes the recent advancements of these dual-function superhydrophobic antibacterial surfaces. First, a brief overview of the fabrication strategies and bacteria-repelling mechanism of superhydrophobic surfaces is provided and then the dual-function superhydrophobic antibacterial surfaces are classified into three types based on the bacteria-killing mechanism: i) mechanotherapy, ii) chemotherapy, and iii) phototherapy. Finally, the limitations and challenges of current research are discussed and future perspectives in this promising area are proposed. 相似文献
Summary: The first example of the synthesis of acrylonitrile copolymers with porphyrin pendants and the subsequent electrospinning of the resultant copolymers into nanofibers is presented in this communication. Vinyl porphyrin monomers have been synthesized and copolymerized with acrylonitrile through solution polymerization. FT‐IR, NMR, UV‐vis, and fluorescence spectroscopy are used to characterize the copolymers. Preliminary quantum chemical calculations have also been carried out to reveal the activity of the vinyl porphyrin monomers. Nanofibers with a diameter of around 330 nm are prepared by electrospinning the copolymer solutions. Their morphology and porphyrination are clearly observed by field‐emission scanning electron microscopy and fluorescence microscopy. It is speculated that this type of nanofiber may be a latent support of porphyrins for various purposes such as catalysis, molecular imprinting, sensors, and light/energy conversion.
The formation of luminescent nanofibers from porphyrinated polymers. 相似文献
Solution‐, melt‐, and co‐axial electrospinning are well‐known methods for producing nano‐ and microfibers. The electrospinning of colloids (or colloid‐electrospinning) is a new field that offers the possibility to elaborate multicompartment nanomaterials. However, the presence of colloids in the electrospinning feed further complicates theoretical predictions in a system that is dependent on chemical, physical, and process parameters. Herein, we give a summary of recent important results and discuss the perspectives of electrospinning of colloids for the synthesis and characterization of multicompartment fibers. 相似文献
The rapid heat loss and corrosion of nano-aluminum limits the energy performance of metastable intermolecular composites (MICs) in aquatic conditions. In this work, superhydrophobic n-Al/PVDF films were fabricated by the cryogel-templated method. The underwater ignition performance of the energetic films was investigated. The preparation process of energetic materials is relatively simple, and avoids excessively high temperatures, ensuring the safety of the entire experimental process. The surface of the n-Al/PVDF energetic film exhibits super-hydrophobicity. Because the aluminum nanoparticles are uniformly encased in the hydrophobic energetic binder, the film is more waterproof and anti-aging. Laser-induced underwater ignition experiments show that the superhydrophobic modification can effectively induce the ignition of energetic films underwater. The results suggest that the cryogel-templated method provides a feasible route for underwater applications of energetic materials, especially nanoenergetics-on-a-chip in underwater micro-scale energy-demanding systems. 相似文献
Ag nanoparticles (Ag NPs) embedded titanium dioxide (TiO2) nanofibers were fabricated by colloidal sol process, electrospinning, and calcination technique. Calcination of the electrospun nanofibers were heat treated at 600°C for 180 minutes in air atmosphere. X-ray diffraction patterns exhibited that the anatase phase and silver coexisted in the resulted Ag NPs/TiO2 nanofibers; transmission electron microscopy demonstrated Ag NPs well spread in the porous microstructure of composite fibers. The prepared nanofibers were utilized as photocatalyst for degradation of methyl orange. The degradation rate of methyl orange dye solution containing Ag/TiO2 composite nanofibers is 99% only after irradiation for 3 hours. It is proposed that these new Ag NPs/TiO2 composite nanofibers will have potential application in water pollution treatment. 相似文献
The main core of wound treatment is cell growth and anti-infection. To accelerate the proliferation of fibroblasts in the wound and prevent wound infections, various strategies have been tried. It remains a challenge to obtain good cell proliferation and antibacterial effects. Here, human hair kerateine (HHK)/poly(ethylene oxide) (PEO)/poly(vinyl alcohol) (PVA) nanofibers were prepared using cysteine-rich HHK, and then, silver nanoparticles (AgNPs) were in situ anchored in the sulfur-containing amino acid residues of HHK. After the ultrasonic degradation test, HHK/PEO/PVA nanofibrous mats treated with 0.005-M silver nitrate were selected due to their relatively complete structures. It was observed by TEM-EDS that the sulfur-containing amino acids in HHK were the main anchor points of AgNPs. The results of FTIR, XRD and the thermal analysis suggested that the hydrogen bonds between PEO and PVA were broken by HHK and, further, by AgNPs. AgNPs could act as a catalyst to promote the thermal degradation reaction of PVA, PEO and HHK, which was beneficial for silver recycling and medical waste treatment. The antibacterial properties of AgNP-HHK/PEO/PVA nanofibers were examined by the disk diffusion method, and it was observed that they had potential antibacterial capability against Gram-positive bacteria, Gram-negative bacteria and fungi. In addition, HHK in the nanofibrous mats significantly improved the cell proliferation of NIH3T3 cells. These results illustrated that the AgNP-HHK/PEO/PVA nanofibrous mats exhibited excellent antibacterial activity and the ability to promote the proliferation of fibroblasts, reaching our target applications. 相似文献
For mechanical actuators, a response to external stimuli is required. Main‐chain liquid crystal elastomers (MCLCEs) show high response to changes in temperature especially in the vicinity of a phase transition. Most of these crosslinked materials were synthesized in a one‐step reaction which leads to a macroscopically aligned elastomer. Up to now only macroscopic samples have been prepared. We are presenting a new approach which allows us to prepare thin films as well as aligned fibers. First a liquid crystalline main‐chain polymer with a photoactive moiety was synthesized, which was oriented by a mechanical field and photocrosslinked. The thin films show exceptional mechanical properties such as large temperature‐dependent changes in length and a nonlinear stress–strain relation. To obtain fibers, we used the electrospinning process from solution with in situ UV curing. We obtained crosslinked fibers with a uniform alignment of the nematic director.
