Metal oxidation states in biological water splitting

A central question in biological water splitting concerns the oxidation states of the manganese ions that comprise the oxygen-evolving complex of photosystem II. Understanding the nature and order of oxidation events that occur during the catalytic cycle of five S_i states (i = 0–4) is of fundamental importance both for the natural system and for artificial water oxidation catalysts. Despite the widespread adoption of the so-called “high-valent scheme”—where, for example, the Mn oxidation states in the S₂ state are assigned as III, IV, IV, IV—the competing “low-valent scheme” that differs by a total of two metal unpaired electrons (i.e. III, III, III, IV in the S₂ state) is favored by several recent studies for the biological catalyst. The question of the correct oxidation state assignment is addressed here by a detailed computational comparison of the two schemes using a common structural platform and theoretical approach. Models based on crystallographic constraints were constructed for all conceivable oxidation state assignments in the four (semi)stable S states of the oxygen evolving complex, sampling various protonation levels and patterns to ensure comprehensive coverage. The models are evaluated with respect to their geometric, energetic, electronic, and spectroscopic properties against available experimental EXAFS, XFEL-XRD, EPR, ENDOR and Mn K pre-edge XANES data. New 2.5 K ⁵⁵Mn ENDOR data of the S₂ state are also reported. Our results conclusively show that the entire S state phenomenology can only be accommodated within the high-valent scheme by adopting a single motif and protonation pattern that progresses smoothly from S₀ (III, III, III, IV) to S₃ (IV, IV, IV, IV), satisfying all experimental constraints and reproducing all observables. By contrast, it was impossible to construct a consistent cycle based on the low-valent scheme for all S states. Instead, the low-valent models developed here may provide new insight into the over-reduced S states and the states involved in the assembly of the catalytically active water oxidizing cluster.     

五氟代锰卟啉模拟酶体系快速混合停流吸收谱

采用快速混合停流技术,在实际反应条件下,考察了五氟代锰卟啉配合物Ｍｎ~Ⅲ（ＴＦＰＰ）Ｃ１与两种单氧给体亚碘酰苯ＰｈＩＯ和过氧苯甲酸ｍ－ＣＰＢＡ构建的细胞色素Ｐ－４５０模拟酶体系催化活性物种的生成及催化烯烃环氧化过程．在氧给体ＰｈＩＯ作用下,Ｍｎ~Ⅲ（ＴＦＰＰ）Ｃ１生成了高价锰氧卟啉配合物和双核μ－氧锰卟啉配合物,具有高的催化环氧化活性和催化剂稳定性．而在氧给体ｍ－ＣＰＢＡ作用下,Ｍｎ~Ⅲ（ＴＦＰＰ）Ｃ１则生成了一种较稳定物种,以致催化活性较低。     

Scandium sulfate complexation in aqueous solution by dielectric relaxation spectroscopy

Ion association in aqueous solutions of scandium sulfate has been investigated at 25 degrees C and at concentrations from 0.01 to 0.8 M by broadband dielectric spectroscopy over the frequency range 0.2 相似文献   

Synthesis, characterization, and physicochemical properties of manganese(III) and manganese(V)-oxo corrolazines

The structural and physicochemical properties of the manganese-corrolazine (Cz) complexes (TBP8Cz)Mn(V)O (1) and (TBP8Cz)Mn(III) (2) (TBP = p-tert-butylphenyl) have been determined. Recrystallization of 2 from toluene/MeOH resulted in the crystal structure of (TBP8Cz)Mn(III)(CH3OH) (2 x MeOH). The packing diagram of 2 x MeOH reveals hydrogen bonds between MeOH axial ligands and meso N atoms of adjacent molecules. Solution binding studies of 2 with different axial ligands (Cl-, Et3PO, and Ph3PO) reveal strong binding, corroborating the preference of the Mn(III) ion for a five-coordinate environment. High-frequency and field electron paramagnetic resonance (HFEPR) spectroscopy of solid 2 x MeOH shows that 2 x MeOH is best described as a high-spin (S = 2) Mn(III) complex with zero-field splitting parameters typical of corroles. Structural information on 1 was obtained through an X-ray absorption near-edge structure (XANES)/extended X-ray absorption fine structure (EXAFS) study and compared to XANES/EXAFS data for 2 x MeOH. The XANES data for 1 shows an intense pre-edge transition characteristic of a high-valent metal-oxo species, and a best fit of the EXAFS data gives a short Mn-O bond distance of 1.56 A, confirming the structure of the metal-oxo unit in 1. Detailed spectroelectrochemical studies of 1 and 2 were performed revealing multiple reversible redox processes for both complexes, including a relatively low potential for the Mn(V) --> Mn(IV) process in 1 (near 0.0 V vs saturated calomel reference electrode). Chemical reduction of 1 results in the formation of a Mn(III)Mn(IV)(mu-O) dimer as characterized by electron paramagnetic resonance spectroscopy.     

Insight into the mechanism of oxidative kinetic resolution of racemic secondary alcohols by using manganese(III)(salen) complexes as catalysts

The oxidative kinetic resolution of various racemic secondary alcohols with PhI(OAc)(2) catalyzed by chiral [Mn(III)(salen)] complexes in the presence of KBr was studied in a water/organic solvent mixture. The dramatic, synergetic effect of additives, organic solvent, and the substituents of chiral salen ligands on the enantioselectivities of the reactions is reported. Results from UV/Vis spectroscopy and ESI-MS studies provide evidence that these reactions are induced by the formation of a high-valent manganese intermediate.     

Control of the Electronic Structure of Manganese Nitrido Complexes by Para Ring Substituents:a Theoretical Study

The relationship between the electronic structures of manganese nitrido complexes and the substituted ligands is investigated by using density functional theory.By designing a series of manganese nitrido complexes [Mn(SalenR)N]+ with different para ring substituents(R = H,CH_3,NH_2,OCH_3,NMeF,etc) of the ancillary ligand,the properties of manganese-nitrogen bonds were compared for two kinds of electronic structures,of which the radical resides on metal center or the coordinated ring ligand.Our calculation shows that for R = H,CH_3 and NH_2,the [Mn(SalenR)N]+ complexes have a high-valent Mn(VI) center,and for R = OCH_3 and NMeF,the complexes represent a configuration where the radical delocalizes on the ligand.It is found that the relative energies of these two species depend on electronic properties of the substituent,originating from the intrinsic property of HOMO-LUMO gaps.     

FTIR study of manganese dimers with carboxylate donors as model complexes for the water oxidation complex in Photosystem II

The carboxylate stretching frequencies of two high-valent, di-μ-oxido bridged, manganese dimers has been studied with IR spectroscopy in three different oxidation states. Both complexes contain one monodentate carboxylate donor to each Mn ion, in one complex, the carboxylate is coordinated perpendicular to the Mn-(μ-O)(2)-Mn plane, and in the other complex, the carboxylate is coordinated in the Mn-(μ-O)(2)-Mn plane. For both complexes, the difference between the asymmetric and the symmetric carboxylate stretching frequencies decrease for both the Mn(2)(IV,IV) to Mn(2)(III,IV) transition and the Mn(2)(III,IV) to Mn(2)(III,III) transition, with only minor differences observed between the two arrangements of the carboxylate ligand versus the Mn-(μ-O)(2)-Mn plane. The IR spectra also show that both carboxylate ligands are affected for each one electron reduction, i.e., the stretching frequency of the carboxylate coordinated to the Mn ion that is not reduced also shifts. These results are discussed in relation to FTIR studies of changes in carboxylate stretching frequencies in a one electron oxidation step of the water oxidation complex in Photosystem II.     

The nature of the intermediates in the reactions of Fe(III)- and Mn(III)-microperoxidase-8 with H(2)O(2): a rapid kinetics study

Kinetic studies were performed with microperoxidase-8 (Fe(III)MP-8), the proteolytic breakdown product of horse heart cytochrome c containing an octapeptide linked to an iron protoporphyrin IX. Mn(III) was substituted for Fe(III) in Mn(III)MP-8.The mechanism of formation of the reactive metal-oxo and metal-hydroperoxo intermediates of M(III)MP-8 upon reaction of H(2)O(2) with Fe(III)MP-8 and Mn(III)MP-8 was investigated by rapid-scan stopped-flow spectroscopy and transient EPR. Two steps (k(obs1) and k(obs2)) were observed and analyzed for the reaction of hydrogen peroxide with both catalysts. The plots of k(obs1) as function of [H(2)O(2)] at pH 8.0 and pH 9.1 for Fe(III)MP-8, and at pH 10.2 and pH 10.9 for Mn(III)MP-8, exhibit saturation kinetics, which reveal the accumulation of an intermediate. Double reciprocal plots of 1/k(obs1) as function of 1/[H(2)O(2)] at different pH values reveal a competitive effect of protons in the oxidation of M(III)MP-8. This effect of protons is confirmed by the linear dependence of 1/k(obs1) on [H(+)] showing that k(obs1) increases with the pH. The UV-visible spectra of the intermediates formed at the end of the first step (k(obs1)) exhibit a spectrum characteristic of a high-valent metal-oxo intermediate for both catalysts. Transient EPR of Mn(III)MP-8 incubated with an excess of H(2)O(2), at pH 11.5, shows the detection of a free radical signal at g approximately equal to 2 and of a resonance at g approximately equal to 4 characteristic of a Mn(IV) (S = 3/2) species. On the basis of these results, the following mechanism is proposed: (i) M(III)MP-8-OH(2) is deprotonated to M(III)MP-8-OH in a rapid preequilibrium step, with a pK(a) = 9.2 +/- 0.9 for Fe(III)MP-8 and a pK(a) = 11.2 +/- 0.3 for Mn(III)MP-8; (ii) M(III)MP-8-OH reacts with H(2)O(2) to form Compound 0, M(III)MP8-OOH, with a second-order rate constant k(1) = (1.3 +/- 0.6) x 10(6) M(-1) x s(-1) for Fe(III)MP-8 and k(1) = (1.6 +/- 0.9) x 10(5) M(-1) x s(-1) for Mn(III)MP-8; (iii) this metal-hydroperoxo intermediate is subsequently converted to a high-valent metal-oxo species, M(IV)MP-8=O, with a free radical on the peptide (R(*+)). The first-order rate constants for the cleavage of the hydroperoxo group are k(2) = 165 +/- 8 s(-1) for Fe(III)MP-8 and k(2) = 145 +/- 7 s(-1) for Mn(III)MP-8; and (iv) the proposed M(IV)MP-8=O(R(*+)) intermediate slowly decays (k(obs2)) with a rate constant of k(obs2) = 13.1 +/- 1.1 s(-)(1) for Fe(III)MP-8 and k(obs2) = 5.2 +/- 1.2 s(-1) for Mn(III)MP-8. The results show that Compound 0 is formed prior to what is analyzed as a high-valent metal-oxo peptide radical intermediate.     

Manganese(III) Schiff base complexes: chemistry relevant to the copolymerization of epoxides and carbon dioxide

Schiff base complexes of the form (acacen)Mn(III)X (acacen = N,N'-bis(acetylacetone)-1,2-ethylenediimine), where X = OAc, Cl, or N(3), have been evaluated for their ability to couple CO(2) and cyclohexene oxide in the presence of a variety of cocatalysts to provide cyclic or polycarbonates. These complexes proved to be ineffective at catalyzing this process; however, valuable information related to the coordination chemistry of these manganese Schiff bases was elucidated. Of importance, mechanistic findings as revealed by comprehensive studies involving structurally related (salen)CrX and (salen)CoX complexes strongly support the requirement of six-coordinate metal species for the effective copolymerization of CO(2) and epoxides. In the case of these Mn(III) complexes, it was determined that in chloroform or toluene solution a five-coordinate species was greatly favored over a six-coordinate species even in the presence of 20 equiv or more of various Lewis bases. Significantly epoxide monomers such as propylene oxide and cyclohexene oxide displayed no tendency to bind to these (acacen)MnX derivatives, even when used as solvents. Only in the case of excessive quantities of heterocyclic amines such as pyridine, DMAP, and DBU was spectral evidence of a six-coordinate Mn derivative observed in solution. X-ray crystal structures are provided for many of the complexes involved in this study, including the one-dimensional polymeric structures of [(acacen)MnOAc x 2H(2)O](n), [(acacen)MnN(3)](n) (mu(1,3)-N(3)), and a rare mixed bridging species [(acacen)MnN(3)](n) (mu(1,3)-N(3)/mu(1,1)-N(3)). In addition, a structure was obtained in which the unit cell contains both a (acacen)MnN(3)(DMAP) and a (acacen)MnN(3) species.     

Electrochemical reduction of Fe(III), Cr(III), and Mn(III) porphyrin complexes in DMSO

The half-wave potentials are given for the electrochemical reduction of Fe(III), Cr(III), and Mn(III) porphyrin complexes. Cyclic voltamperometry was used to study the reversibility of these reactions. An effect was demonstrated for the structure of the porphyrin ligand on the half-wave potentials for the reduction of the Mn(III) complexes.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1665–1668, July, 1991.     

Synthesis, characterization, and reactivities of manganese(V)-oxo porphyrin complexes

The reactions of manganese(III) porphyrin complexes with terminal oxidants, such as m-chloroperbenzoic acid, iodosylarenes, and H(2)O(2), produced high-valent manganese(V)-oxo porphyrins in the presence of base in organic solvents at room temperature. The manganese(V)-oxo porphyrins have been characterized with various spectroscopic techniques, including UV-vis, EPR, 1H and 19F NMR, resonance Raman, and X-ray absorption spectroscopy. The combined spectroscopic results indicate that the manganese(V)-oxo porphyrins are diamagnetic low-spin (S = 0) species with a longer, weaker Mn-O bond than in previously reported Mn(V)-oxo complexes of non-porphyrin ligands. This is indicative of double-bond character between the manganese(V) ion and the oxygen atom and may be attributed to the presence of a trans axial ligand. The [(Porp)Mn(V)=O](+) species are stable in the presence of base at room temperature. The stability of the intermediates is dependent on base concentration. In the absence of base, (Porp)Mn(IV)=O is generated instead of the [(Porp)Mn(V)=O](+) species. The stability of the [(Porp)Mn(V)=O](+) species also depends on the electronic nature of the porphyrin ligands: [(Porp)Mn(V)=O](+) complexes bearing electron-deficient porphyrin ligands are more stable than those bearing electron-rich porphyrins. Reactivity studies of manganese(V)-oxo porphyrins revealed that the intermediates are capable of oxygenating PPh(3) and thioanisoles, but not olefins and alkanes at room temperature. These results indicate that the oxidizing power of [(Porp)Mn(V)=O](+) is low in the presence of base. However, when the [(Porp)Mn(V)=O](+) complexes were associated with iodosylbenzene in the presence of olefins and alkanes, high yields of oxygenated products were obtained in the catalytic olefin epoxidation and alkane hydroxylation reactions. Mechanistic aspects, such as oxygen exchange between [(Porp)Mn(V)=16O](+) and H(2)(18)O, are also discussed.     

Polyhedral oligometallasilsesquioxanes as models for silica-supported catalysts

Incompletely-condensed silsesquioxanes offer excellent potential as ligands in homogeneous models for silica-supported catalysts. This paper focuses on the chemistry of Cr and V-containing silsesquioxanes, which are proposed as models for silica-supported chromates and vanadates. It has been shown that the reactivities of these transition-metal-containing silsesquioxanes can be very different than that observed for stoichiometrically similar alkoxide or siloxide complexes. In particular, two new catalysts for the polymerization of olefins have been prepared by reacting structurally well-defined Cr and V-containing Si/O frameworks with trialkylaluminum reagents. Mechanistic studies on the vanadium system implicate high-valent V(V) complexes as the active catalytic species.     

Reactivities of mononuclear non-heme iron intermediates including evidence that iron(III)-hydroperoxo species is a sluggish oxidant

There is an intriguing, current controversy on the involvement of iron(III)-hydroperoxo species as a "second electrophilic oxidant" in oxygenation reactions by heme and non-heme iron enzymes and their model compounds. In the present work, we have performed reactivity studies of the iron-hydroperoxo species in nucleophilic and electrophilic reactions, with in situ-generated mononuclear non-heme iron(III)-hydroperoxo complexes that have been well characterized with various spectroscopic techniques. The intermediates did not show any reactivities in the nucleophilic (e.g., aldehyde deformylation) and electrophilic (e.g., oxidation of sulfide and olefin) reactions. These results demonstrate that non-heme iron(III)-hydroperoxo species are sluggish oxidants and that the oxidizing power of the intermediates cannot compete with that of high-valent iron(IV)-oxo complexes. We have also reported reactivities of mononuclear non-heme iron(III)-peroxo and iron(IV)-oxo complexes in the aldehyde deformylation and the oxidation of sulfides, respectively.     

Electronic structure of high-valent transition metal corrolazine complexes. The young and innocent?

This is a first quantum chemical study of corrolazine complexes. DFT calculations suggest that despite their extremely contracted central cavities, compared with porphyrins, a variety of corrolazine complexes may be expected to exist as stable compounds. The calculations also indicate that corrolazine complexes may be regarded as strongly electron-deficient analogues of corrole complexes. Thus, the calculated valence ionization potentials of P(V) and Cu(III) corrolazine derivatives are dramatically higher than those of analogous corrole derivatives. In addition, DFT calculations on Fe(IV) and Mn(IV) corrole and corrolazine derivatives suggest that compared with the often noninnocent corrole ligands, corrolazines are electronically more innocent and stabilize "purer" high-valent states of transition metal ions.     

Determination of mu-oxo exchange rates in di-mu-oxo dimanganese complexes by electrospray ionization mass spectrometry

A time-resolved mass spectrometric technique has been used for the determination of rates of exchange of mu-O atoms with water for the complexes [(mes-terpy)2Mn2(III/IV)(mu-O)2(H2O)2](NO3)3 (1, mes-terpy = 4'-mesityl-2,2':6',2' '-terpyridine), [(bpy)4Mn2(III/IV)(mu-O)2](ClO4)3 (2, bpy = 2,2'-bipyridine), [(phen)4Mn2(III/IV)(mu-O)2](ClO4)3 (3, phen = 1,10-phenanthroline), [(bpea)2Mn2(III/IV)(mu-O)2(mu-OAc)](ClO4)2 (4, bpea = bis(2-pyridyl)ethylamine), [(bpea)2Mn2(IV/IV)(mu-O)2(mu-OAc)](ClO4)3 (4ox), [(terpy)4Mn4(IV/IV/IV/IV)(mu-O)5(H2O)2](ClO4)6 (5, terpy = 2,2':6',2'-terpyridine), and [(tacn)4Mn4(IV/IV/IV/IV)(mu-O)6]Br(3.5)(OH)0.5.6H2O (6, tacn = 1,4,7-triazacyclononane). The rate of exchange of mu-OAc bridges with free acetate in solution has been measured for complexes 4 and 4ox. These are the first measurements of rates of ligand exchange on biologically relevant high-valent Mn complexes. The data analysis method developed here is of general utility in the quantitation of isotope exchange processes by mass spectrometry. We find that the presence of labile coordination sites on Mn increases mu-O exchange rates, and that all-Mn(IV) states are more inert toward exchange than mixed Mn(III)-Mn(IV) states. The rates of mu-O exchange obtained in this work for a di-mu-oxo Mn2(III/IV) dimer with labile coordination sites are compared with the oxygen isotope incorporation rates from substrate water to evolved dioxygen measured in different S states of the oxygen evolving complex (OEC) of photosystem II (PSII). On the basis of this comparison, we propose that both substrate waters are not bound as mu-O bridges between Mn atoms in the S2 and S3 states of the OEC.     

An isolable, nonreducible high-valent manganese(V) imido corrolazine complex

The manganese(V) imido complex [(TBP8Cz)Mn(V)(NMes)] (2) was synthesized from the Mn(III) complex [(TBP8Cz)Mn(III)] (1) and thermolysis of mesityl azide. An X-ray structure of 2 reveals a short Mn-N distance [1.595(4) A], consistent with the Mn-N triple bond expected for a manganese(V) imido species. This high-valent species is remarkably inert to one- and two-electron reductive processes such as NR group transfer to alkenes or H-atom abstraction from O-H bonds. Electrochemical studies support this lack of reactivity. In contrast, oxidation of 2 is easily accomplished by treatment with [(4-BrC6H4)3N]*+SbCl6, giving a pi-radical-cation complex.     

Synthesis, structure and catalase-like activity of dimanganese(III) complexes of 1,5-bis(X-salicylidenamino)pentan-3-ol (X = 3- and 5-methyl). Influence of phenyl-ring substituents on catalytic activity

The diMn(III) complexes [Mn2(5-Me-salpentO)(mu-MeO)(mu-AcO)(H2O)Br] (1) and [Mn2(3-Me-salpentO)(mu-MeO)(mu-AcO)(MeOH)2]Br (2), where salpentOH = 1,5-bis(salicylidenamino)pentan-3-ol, were synthesised and structurally characterized. The two complexes include a bis(micro-alkoxo)(micro-acetato) triply-bridged diMn(III) core with an Mn...Mn separation of 2.93-2.94 A, the structure of which is retained upon dissolution. Complexes 1 and 2 show catalytic activity toward disproportionation of H2O2, with first-order dependence on the catalyst, and saturation kinetics on [H2O2], in methanol and DMF. In DMF, the two complexes are able to disproportionate at least 1500 eq. of H2O2 without significant decomposition, while in methanol, they rapidly lose activity with formation of a non-coupled Mn(II) species. Electrospray ionisation mass spectrometry, EPR and UV/vis spectroscopy used to monitor the reaction suggest that the major active form of the catalyst occurs in the Mn2(III) oxidation state during cycling. The correlation between log(k(cat)) and the redox potentials of 1, 2 and analogous complexes of other X-salpentOH derivatives indicates that, in this series, the oxidation of the catalyst is probably the rate-limiting step in the catalytic cycle. It is also noted that formation of the catalyst-peroxide adduct is more sensitive to steric effects in DMF than in methanol. Overall, kinetics and spectroscopic studies of H2O2 dismutation by these complexes converge at a catalytic cycle that involves the Mn2(III) and Mn2(IV) oxidation states.     

Investigating the oxidation of alkenes by non-heme iron enzyme mimics

Iron is emerging as a key player in the search for efficient and environmentally benign methods for the functionalisation of C-H bonds. Non-heme iron enzymes catalyse a diverse array of oxidative chemistry in nature, and small-molecule complexes designed to mimic the non-heme iron active site have great potential as C-H activation catalysts. Herein we report the synthesis of a series of organic ligands that incorporate key features of the non-heme iron active site. Iron(ii) complexes of these ligands have been generated in situ and their ability to promote hydrocarbon oxidation has been investigated. Several of these systems promote the biomimetic dihydroxylation of cyclohexene at low levels, when hydrogen peroxide is used as the oxidant; allylic oxidation products are also observed. An investigation of ligand stability reveals formation of several breakdown products under the conditions of the oxidative turnover reactions. These products arise via oxidative decarboxylation, dehydration and deamination reactions. Taken together these results indicate that competing mechanisms are at play with these systems: biomimetic hydroxylation involving high-valent iron species, and allylic oxidation via Fenton chemistry and Haber-Weiss radical pathways.     

Utilization of hydrogen bonds to stabilize M-O(H) units: synthesis and properties of monomeric iron and manganese complexes with terminal oxo and hydroxo ligands

Non-heme iron and manganese species with terminal oxo ligands are proposed to be key intermediates in a variety of biological and synthetic systems; however, the stabilization of these types of complexes has proven difficult because of the tendency to form oxo-bridged complexes. Described herein are the design, isolation, and properties for a series of mononuclear Fe(III) and Mn(III) complexes with terminal oxo or hydroxo ligands. Isolation of the complexes was facilitated by the tripodal ligand tris[(N'-tert-butylureaylato)-N-ethyl]aminato ([H(3)1](3-)), which creates a protective hydrogen bond cavity around the M(III)-O(H) units (M(III) = Fe and Mn). The M(III)-O(H) complexes are prepared by the activation of dioxygen and deprotonation of water. In addition, the M(III)-O(H) complexes can be synthesized using oxygen atom transfer reagents such as N-oxides and hydroxylamines. The [Fe(III)H(3)1(O)](2-) complex also can be made using sulfoxides. These findings support the proposal of a high valent M(IV)-oxo species as an intermediate during dioxygen cleavage. Isotopic labeling studies show that oxo ligands in the [M(III)H(3)1(O)](2-) complexes come directly from the cleavage of dioxygen: for [Fe(III)H(3)1(O)](2-) the nu(Fe-(16)O) = 671 cm(-1), which shifts 26 cm(-1) in [Fe(III)H(3)1((18)O)](2-) (nu(Fe-(18)O) = 645 cm(-1)); a nu(Mn-(16)O) = 700 cm(-1) was observed for [Mn(III)H(3)1((16)O)](2-), which shifts to 672 cm(-1) in the Mn-(18)O isotopomer. X-ray diffraction studies show that the Fe-O distance is 1.813(3) A in [Fe(III)H(3)1(O)](2-), while a longer bond is found in [Fe(III)H(3)1(OH)](-) (Fe-O at 1.926(2) A); a similar trend was found for the Mn(III)-O(H) complexes, where a Mn-O distance of 1.771(5) A is observed for [Mn(III)H(3)1(O)](2-) and 1.873(2) A for [Mn(III)H(3)1(OH)](-). Strong intramolecular hydrogen bonds between the urea NH groups of [H(3)1](3-) and the oxo and oxygen of the hydroxo ligand are observed in all the complexes. These findings, along with density functional theory calculations, indicate that a single sigma-bond exists between the M(III) centers and the oxo ligands, and additional interactions to the oxo ligands arise from intramolecular H-bonds, which illustrates that noncovalent interactions may replace pi-bonds in stabilizing oxometal complexes.     

Biomimetic hydrocarbon oxidation catalyzed by nonheme iron(III) complexes with peracids: evidence for an Fe(V)=O species

Mononuclear nonheme iron(III) complexes of tetradentate ligands containing two deprotonated amide moieties, [Fe(Me(2)bpb)Cl(H(2)O)] (3 a) and [Fe(bpc)Cl(H(2)O)] (4 a), were prepared by substitution reactions involving the previously synthesized iron(III) complexes [Et(3)NH][Fe(Me(2)bpb)Cl(2)] (3) and [Et(3)NH][Fe(bpc)Cl(2)] (4). Complexes 3 a and 4 a were characterized by IR and elemental analysis, and complex 3 a also by X-ray crystallography. Nonheme iron(III) complexes 3, 3 a, 4, and 4 a catalyze olefin epoxidation and alcohol oxidation on treatment with m-chloroperbenzoic acid. Pairwise comparisons of the reactivity of these complexes revealed that the nature of the axial ligand (Cl(-) versus H(2)O) influences the yield of oxidation products, whereas an electronic change in the supporting chelate ligand has little effect. Hydrocarbon oxidation by these catalysts was proposed to involve an iron(V) oxo species which is formed on heterolytic O-O bond cleavage of an iron acylperoxo intermediate (FeOOC(O)R). Evidence for this iron(V) oxo species was derived from KIE (k(H)/k(D)) values, H(2) (18)O exchange experiments, and the use of peroxyphenylacetic acid (PPAA) as the peracid. Our results suggest that an Fe(V)=O moiety can form in a system wherein the supporting chelate ligand comprises a mixture of neutral and anionic nitrogen donors. This work is relevant to the chemistry of mononuclear nonheme iron enzymes that are proposed to oxidize organic substrates via reaction pathways involving high-valent iron oxo species.