高效液相色谱整体柱技术研究进展

高效液相色谱整体柱作为一种新型的分离介质,由于其制备工艺简单、易于修饰改性和分离性能优异,近年来引起了人们的广泛关注。聚合物整体柱具有生物相容性好、柱效高、寿命长、选材范围广、重现性好及使用不受p H限制等优势,广泛应用于食品、化工、农业、环境及生物医学领域小分子化合物及蛋白质的分离和检测,显示出较好的应用前景。本文就近10年液相色谱整体柱的制备、改性方法及应用的研究成果进行综述,并对其在不同应用领域的发展前景作了展望。     

On the Future Design of Bio‐Inspired Polyetheretherketone Dental Implants

Polyetheretherketone (PEEK) is a promising implant material because of its excellent mechanical characteristics. Although this polymer is a standard material in spinal applications, PEEK is not in use in the manufacturing of dental implants, where titanium is still the most‐used material. This may be caused by its relative bio‐inertness. By the use of various surface modification techniques, efforts have been made to enhance its osseointegrative characteristics to enable the polymer to be used in dentistry. In this feature paper, the state‐of‐the‐art for dental implants is given and different surface modification techniques of PEEK are discussed. The focus will lie on a covalently attached surface layer mimicking natural bone. The usage of such covalently anchored biomimetic composite materials combines many advantageous properties: A biocompatible organic matrix and a mineral component provide the cells with a surrounding close to natural bone. Bone‐related cells may not recognize the implant as a foreign body and therefore, may heal and integrate faster and more firmly. Because neither metal‐based nor ceramics are ideal material candidates for a dental implant, the combination of PEEK and a covalently anchored mineralized biopolymer layer may be the start of the desired evolution in dental surgery.     

The effect of monolithic zirconia thickness on the degree of conversion of dental resin cements: ATR-FTIR spectroscopic analysis

The purpose of this study was to evaluate the effect of monolithic zirconia thickness on degree of conversion (DC) of different resin cements. Five groups (1 mm, 1.5 mm, 2 mm monolithic zirconia, veneered zirconia substructure, and lithium disilicate) of disk-shaped ceramic specimens (14 mm in diameter) were prepared (n = 6). Three dental resin cements (Variolink II light-cured, Variolink II dual-cured and Zirconite dual-cured) were tested to evaluate their DC under each ceramic group. FTIR spectra were recorded using Attenuated Total Reflectance-Fourier Transform Infrared Spectrometer (ATR-FTIR). The DC% was calculated by ratio of infrared absorbance values of aliphatic and aromatic peaks for uncured and cured states. Data were statistically analyzed by Analysis of Variance (ANOVA) and post hoc Tukey tests (a = 0.05). DC of dental resin cement specimens under monolithic zirconia decreased with increasing thickness. For Variolink II light-cured cement, the highest DC found under lithium disilicate and the lowest DC observed under veneered zirconia specimens. Zirconite which is recommended for cementation of zirconia revealed the highest DC when polymerized under monolithic or veneered zirconia. Under lithium disilicate specimens, DC of Zirconite was similar with light-cured resin cement.     

Determination of the stability and magnetic properties of Fe–Pd nitride using the generalised gradient approximation (GGA)

In this study, an electronic structure calculation of the substituted nitride PdFe₃N was conducted, and a posterior understanding of its structural and magnetic properties was obtained. A first principle method was applied to study the lattice parameter variation in relation to the energy of solid formation. After the equilibrium parameter was found, some properties of the ground state, such as the magnetic moment and the bulk modulus, were calculated. Preliminary observations show that the material properties of γ′-Fe₄N vary significantly with the insertion of the palladium atom in the matrix as well as when the material is subjected to applied pressure. The density of states shows a strong interaction between the s states of nitrogen and, primarily, the s and p states of iron, presenting a weak interaction with the palladium atoms. The analysis of such properties illustrates why these nitrides have a promising future for use in technological applications.     

Preparation of Silica Aerogel/Resin Composites and Their Application in Dental Restorative Materials

As the most advanced aerogel material, silica aerogel has had transformative industrial impacts. However, the use of silica aerogel is currently limited to the field of thermal insulation materials, so it is urgent to expand its application into other fields. In this work, silica aerogel/resin composites were successfully prepared by combining silica aerogel with a resin matrix for dental restoration. The applications of this material in the field of dental restoration, as well as its performance, are discussed in depth. It was demonstrated that, when the ratio of the resin matrix Bis-GMA to TEGDMA was 1:1, and the content of silica aerogel with 50 μm particle size was 12.5%, the composite achieved excellent mechanical properties. The flexural strength of the silica aerogel/resin composite reached 62.9546 MPa, which was more than five times that of the pure resin. Due to the presence of the silica aerogel, the composite also demonstrated outstanding antibacterial capabilities, meeting the demand for antimicrobial properties in dental materials. This work successfully investigated the prospect of using commercially available silica aerogels in dental restorative materials; we provide an easy method for using silica aerogels as dental restorative materials, as well as a reference for their application in the field of biomedical materials.     

Chromatographic characterisation of a novel type of monolithic methylsilsesquioxane-based HPLC column

A novel monolithic methylsilsesquioxane-based material with hierarchical pore structure was prepared and tested for its applicability as stationary phase for RP-HPLC. The monolithic material is produced using sol-gel chemistry according to a proprietary protocol developed in our working group. A procedure for the production of HPLC columns from the self-contained monolithic material is described. The chromatographic performance and the reproducibility of the column production was tested using the procedures of the widely accepted Tanaka test and suitable parts of the Engelhardt test which were applied to a set of four monolithic columns produced under identical conditions. The test proved the excellent hydrophobic selectivity and silanophilic behaviour of the new stationary phase material. According to the tests on steric and shape selectivity, there are strong indications that this type of material also acts as restricted access material. This assumption is further supported by the presence of a high fraction of micropores as was evidenced by physical characterisation of the material. The novel stationary phase material showed great potential for the separation of small apolar substances and was found to be particularly useful in the separation of basic compounds due its excellent silanophilic interaction.     

Affinity Chromatography of Human Blood Coagulation Factor VIII on Monoliths with Peptides from a Combinatorial Library

FVIII is a very complex molecule of great therapeutic significance. It is purified by a sequence of chromatographic steps including immunoaffinity chromatography. A peptide affinity chromatography method has been developed using peptides derived from a combinatorial library. Spot technology using cellulose sheets has been applied for this purpose. The dual positional scanning strategy was used for identification of the amino acids in random positions. Approximately 5000 possible candidates found in the first screening round were reduced to a panel of 36. Six candidates have been selected empirically. Five peptides seem to be directed against the light chain of FVIII, one peptide seems to be directed against the heavy chain. The peptides have been immobilized on conventional beaded material and CIM polymethacrylate monoliths. Much better performance with respect to capacity and selectivity has been observed with the monolithic material. Exposure of the ligand and its ensuing accessibility are responsible for these properties.     

Monolithic stationary phases for fast ion chromatography and capillary electrochromatography of inorganic ions

The focus of this review is on current developments in monolithic stationary phases for the fast analysis of inorganic ions and other small molecules in ion chromatography (IC) and capillary electrochromatography (CEC), concentrating in particular on the properties of organic (polymer) monolithic materials in comparison to inorganic (silica-based) monoliths. The applicability of these materials for fast IC is discussed in the context of recent publications, including the range of synthesis and modification procedures described. While commercial monolithic silica columns already show promising results on current IC instrumentation, polymer-based monolithic stationary phases are currently predominantly used in the capillary format on modified micro-IC systems. However, they are beginning to find application in IC particularly under high pH conditions, with the potential to replace their particle-packed counterparts.     

Use of hydroxypropyl β-cyclodextrin hybrid monolithic material as adsorbent for dispersive solid-phase extraction of fluoroquinolones from environmental water samples

In this study, the hydroxypropyl β-cyclodextrin hybrid monolithic material was fabricated and firstly applied as an adsorbent for dispersive solid-phase extraction coupled with high-performance liquid chromatography to detect trace-level seven fluoroquinolones in water samples. The prepared hydroxypropyl β-cyclodextrin hybrid monolithic material was characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, and adsorption experiments, which showed excellent specific adsorption to the target fluoroquinolones. Under the optimized conditions, the extraction methodology showed satisfactory precision with relative standard deviations between 2.6% and 5.6%, good linearity (R² ≥ 0.9990), and satisfactory recoveries (82.5–91.8%). The limits of detection and limits of quantification of the method were in the range of 0.4–1.2 and 1.4–4.0 ng/mL, respectively, which confirmed the possibility of quantifying trace levels. Furthermore, the material could be reused at least five times. These results demonstrated that the hydroxypropyl β-cyclodextrin hybrid monolithic material was a promising adsorbent for fluoroquinolones, and the established method combined dispersive solid-phase extraction with high-performance liquid chromatography was suitable for the determination of fluoroquinolones in aqueous samples.     

Amalgam Electrodes for Electroanalysis

Liquid mercury is a unique material for the indicator electrode in voltammetry. One reason for this is the high overvoltage for hydrogen formation, thus extending the actual potential window. Diluted amalgams are important reaction products in voltammetric (polarographic) processes, however liquid amalgams are rarely used directly as electrode material for analytical purposes. Because of the fact that voltammetry is very suitable for field and remote monitoring, issues concerning the use of mercury electrodes in environmental analyses have led to considerable research effort aimed at finding alternative tools with acceptable performance. Solid electrodes are such alternatives. Different types of electrodes are reviewed. In particular, solid amalgam electrodes are very promising, with acceptable low toxicity to be used for field measurements. Solid amalgam electrodes are easy and cheap to construct and are stable over a reasonable time up to several weeks. Assessment of the toxicity risk and the long time stability for remote and unattended monitoring is discussed. The differences between solid dental amalgam electrodes, made by using techniques known from dental clinical practice, and mercury film or mercury layer electrodes on solid substrates are reviewed. In particular the dental technique for constructing solid amalgam electrodes gives advantage because it's fast and inexpensive. Also the technique for making dental amalgam has been explored and optimized over years by dentists, giving advantage when the same technique is used for constructing electrodes. Dental amalgam electrodes has been found to act similar to a silver electrodes, but with high overvoltage towards hydrogen. This make it possible to use the dental amalgam electrode for detection of zinc, cobalt and nickel in additions to other metals like lead, copper, thallium, cadmium, bismuth, iron etc. Also the use for reducible organic compounds is expected to be promising.     

Monolithic Stationary Phases for Capillary Electrochromatography Based on Synthetic Polymers: Designs and Applications

Monolithic materials have quickly become a well‐established stationary phase format in the field of capillary electrochromatography (CEC). Both the simplicity of their in situ preparation method and the large variety of readily available chemistries make the monolithic separation media an attractive alternative to capillary columns packed with particulate materials. This review summarizes the contributions of numerous groups working in this rapidly growing area, with a focus on monolithic capillary columns prepared from synthetic polymers. Various approaches employed for the preparation of the monoliths are detailed, and where available, the material properties of the resulting monolithic capillary columns are shown. Their chromatographic performance is demonstrated by numerous separations of different analyte mixtures in variety of modes. Although detailed studies of the effect of polymer properties on the analytical performance of monolithic capillaries remain scarce at this early stage of their development, this review also discusses some important relationships such as the effect of pore size on the separation performance in more detail.     

新型碳纳米管色谱固定相制备的研究进展

碳纳米管（CNTs）作为一种新型的功能材料,具有优异的物理、化学和机械性能,已经在分析化学领域得到了广泛的关注和应用。通过填充法或原位化学气相沉积法,可制备CNTs气相色谱固定相;将CNTs沉积在硅胶微球或有机聚合物基质微球表面,可制备填充式CNTs液相色谱固定相;通过包埋共聚法将CNTs嵌入聚合物整体柱内,可制备毛细管CNTs液相色谱整体柱。本文主要综述了近年来CNTs（单壁碳纳米管和多壁碳纳米管）用于色谱固定相制备的研究现状,包括气相色谱及液相色谱,并对该领域今后的发展进行展望。     

Monolithic poly(ethylhexyl methacrylate-co-ethylene dimethacrylate) column with restricted access layers prepared via reversible addition-fragmentation chain transfer polymerization

The "living"/controlled radical polymerization has provided an opportunity in making a more homogeneous polymer, which is favorable for polymer-based monolithic column fabrication. To study its application in the preparation of separation material, a capillary poly(ethylhexyl methacrylate-co-ethylene dimethacrylate) monolithic column has been synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. The correlation between the synthetic conditions and the polymer structures and separation performance was studied. The result indicated RAFT-mediated reaction provides condition for creating polymers with narrower pore size distribution and higher column efficiency compared with traditional polymerization. The "living" property of the RAFT polymerization was further utilized to graft hydrophilic polymer on the surface of poly(ethylhexyl methacrylate-co-ethylene dimethacrylate). The hydrophilic chain modified monolithic column has both abilities of protein exclusion and small hydrophobic compound retention. The result indicated that RAFT polymerization can be used for making multifunctional material. The restricted access monolithic material synthesized by this method can be used in biological sample analysis with HPLC direct injection.     

Characterization of monolithic columns for HPLC

Monolithic stationary phases and columns have rapidly become highly popular separation media for liquid chromatography, in spite of their recent discovery. However, their most important features have not yet been completely clarified. A complete understanding of their performance and of their intrinsic characteristics will require the systematic acquisition of many series of reliable experimental data and their consistent analysis from different points of view. Progress in their design and production requires now that the chromatographic behavior of monolithic columns be studied in close connection with their physico-chemical and structural properties. The main goal of this review is to summarize fundamental information on some physico-chemical and chromatographic characteristics of monolithic stationary phases and columns for RPLC. The material reviewed deals only with silica-based monolithic columns. First, structural information on the porosities and the size of the pores in monolithic columns is reported. Second, results of chromatographic studies that deal with the characterization of monolithic columns are summarized. Third, results of detailed studies made on the adsorption equilibrium and the surface heterogeneity of monolithic stationary phases are presented. Finally, results on the mass transfer kinetics in monolithic columns derived from the applications of the classical random-walk model and of the moment theory to a new model of the monolith are discussed.     

Monolithic silica columns with chemically bonded tert-butylcarbamoylquinine chiral anion-exchanger selector as a stationary phase for enantiomer separations

An enantioselective silica rod type chiral stationary phase (CSP) is presented as a novel combination of the well-known enantiomer separation properties of immobilized tert-butyl-carbamoylquinine chiral anion-exchanger selector with the unique properties of monolithic silica material. The chromatographic behavior of the tert-butyl-carbamoylquinine silica rod was studied and compared with a similar prepared particulate material. Good selectivities were achieved for a spectrum of chiral test components like N-derivatized amino acids (DNB- Ac-, DNZ-, Bz-, Z-amino acids) and for Suprofen. The influence of mobile phase parameters, as well as the effect of serially coupling up to six 10 cm monolithic silica columns was studied and put in context to conventional columns of particulate 5 microm type CSP. Using that 60 cm long monolithic column it was possible to improve the enantiomer separation of Suprofen and achieve a baseline separation in less than 10 min of total separation time.     

High Purity Glass Forms by a Colloidal Sol-Gel Process

Novara Technology (NTECH) has developed its own process for bulk silica glass based on Sol-Gel chemistry. The process is characterized by its thermomechanical ideal isotropy of the aerogel and the glass it forms. Remarkable glass properties are: ultrapurity up to 1 ppb or better for single metal contaminant, optical compatibility with high-temperature treatments up to 2000°C, precision mouldability without intrinsic dimensional limitations.The process, that makes large use of the fumed silica Aerosil® in combination with TEOS, is characterized by the synthesis of monolithic material, i.e. a chemically manufactured body with shape and dimensions defined at reaction time, when the whole material is generated as a unit. Process implementation was achieved with the operation of a pilot plant. The road to industrialization besides volume scale-up, readily achieved for the chemical and hypercritical drying sector of the plant, was focused on getting a cost effective procedure.     

Chromatographic biopanning for the selection of peptides with high specificity to Pb from phage displayed peptide library

Toxic heavy metal pollution is a global problem occurring in air, soil as well as water. There is a need for a more cost effective, renewable remediation technique, but most importantly, for a recovery method that is selective for one specific metal of concern. Phage display technology has been used as a powerful tool in the discovery of peptides capable of exhibiting specific affinity to various metals or metal ions. However, traditional phage display is mainly conducted in batch mode, resulting in only one equilibrium state hence low-efficiency selection. It is also unable to monitor the selection process in real time mode. In this study, phage display technique was incorporated with chromatography procedure with the use of a monolithic column, facilitating multiple phage-binding equilibrium states and online monitoring of the selection process in search of affinity peptides to Pb²⁺. In total, 17 candidate peptides were found and their specificity toward Pb²⁺ was further investigated with bead-based enzyme immunoassay (EIA). A highly specific Pb²⁺ binding peptide ThrAsnThrLeuSerAsnAsn (TNTLSNN) was obtained. Based on our knowledge, this is the first report on a new chromatographic biopanning method coupled with monolithic column for the selection of metal ion specific binding peptides. It is expected that this monolith-based chromatographic biopanning will provide a promising approach for a high throughput screening of affinity peptides cognitive of a wide range of target species.     

Dental Applications of Carbon Nanotubes

Glass ionomer cements and resin-based composites are promising materials in restorative dentistry. However, their limited mechanical properties and the risk of bulk/marginal fracture compromise their lifespan. Intensive research has been conducted to understand and develop new materials that can mimic the functional behavior of the oral cavity. Nanotechnological approaches have emerged to treat oral infections and become a part of scaffolds for tissue regeneration. Carbon nanotubes are promising materials to create multifunctional platforms for dental applications. This review provides a comprehensive survey of and information on the status of this state-of-the-art technology and describes the development of glass ionomers reinforced with carbon nanotubes possessing improved mechanical properties. The applications of carbon nanotubes in drug delivery and tissue engineering for healing infections and lesions of the oral cavity are also described. The review concludes with a summary of the current status and presents a vision of future applications of carbon nanotubes in the practice of dentistry.     

Monolithic Silica for Fast HPLC: Current Success and Promising Future

As an approach for fast HPLC, monolithic silica has proven to be highly effective. It is especially successful for routinely obtaining fast isocratic HPLC analyses of small drug molecules. The low cost of monolithic compared with other approaches, such as UPLC, makes it more convenient for everyday application. It is also the more developed and widely applied technique compared with superficially porous particles. It offers the possibility for gaining high plate numbers through column coupling, but not at the expense of run time if a proper flow program is subsequently applied. Good precision and batch reproducibility are now achieved with commercially available monolithic silica columns. The application of monolithic silica columns is already well developed in various fields. It invades the field of bio-analysis and proteomics. Hundreds of analytical methods have already been successfully transferred to or developed on monolithic silica columns. An updated strategy based on Snyder??s method for rapid method development using monolithic column has been provided. However, more is still to be expected from monolithic silica in term of chemistry variation, application, and instrument compatibility. The future of monolithic silica is promising when considering the high demand for fast chromatographic analysis.     

Polymethacrylate monolithic columns for capillary liquid chromatography

In recent years, continuous separation media have attracted considerable attention because of the advantages they offer over packed columns. This research resulted in two useful monolithic material types, the first based on modified silica gel and the second on organic polymers. This work attempts to review advances in the development, characterization, and applications of monolithic columns based on synthetic polymers in capillary chromatography, with the main focus on monolithic beds prepared from methacrylate-ester based monomers. The polymerization conditions used in the production of polymethacrylate monolithic capillary columns are surveyed, with attention being paid to the concentrations of monomers, porogen solvents, and polymerization initiators as the system variables used to control the porous and hydrodynamic properties of the monolithic media. The simplicity of their preparation as well as the possibilities of controlling of their porous properties and surface chemistries are the main benefits of the polymer monolithic capillary columns in comparison to capillary columns packed with particulate materials. The application areas considered in this review concern mainly separations in reversed-phase chromatography, ion-exchange chromatography, hydrophobic and hydrophilic interaction modes; enzyme immobilization and sample preparation in the capillary chromatography format are also addressed.