燃料电池用磺化聚砜类质子交换膜研究

聚砜类聚合物是一类具有良好应用前景的质子交换膜材料。本文对近年来磺化聚砜的制备、磺化聚砜质子交换膜的性能和磺化聚砜交联膜的研究情况做了比较全面的归纳与分析,特别是从聚砜膜的水化性能和导电性能两个大的方面对该类膜的物理性能和电化学性能进行了阐述,并对存在的问题以及研究前景进行了探讨。     

Fabrication and Properties of Graphene Oxide/Sulfonated Polyethersulfone Layer-by-layer Assembled Polyester Fiber Composite Proton Exchange Membranes

Using the hydrogen-bonding interaction between graphene oxide(GO) and sulfonated polyethersulfone (SPES), we constructed the multilayer structure of GO and SPES on the polyester fiber mats via layer-by-layer self-assembly. In each self-assembled layer, sulfonic acid groups are arranged along the axis of fiber, which provides the long-range proton transmission channels, promoting the rapidly proton conduction. The performances of the composite membranes based on SPES and multilayer assembled polyester fiber mats were studied. The results show that the proton conductivity of composite membranes increases with the increasing assembly layers. At the same time, the mechanical properties and methanol-resistance of the composite membranes were obviously improved.     

Synthesis and Characterization of Sulfonated Polyimides Containing Trifluoromethyl Groups as Proton Exchange Membranes

A novel sulfonated diamine, 4,4′‐bis(4‐amino‐3‐trifluoromethylphenoxy) biphenyl 3,3′‐disulfonic acid (F‐BAPBDS), was successfully synthesized by nucleophilic aromatic substitution of 4,4′‐dihydroxybiphenyl with 2‐chloro‐5‐nitrobenzotrifluoride, followed by reduction and sulfonation. A series of sulfonated polyimides of high molecular weight (SPI‐x, x represents the molar percentage of the sulfonated monomer) were prepared by copolymerization of 1,4,5,8‐naphathlenetetracarboxylic dianhydride (NTDA) with F‐BAPBDS and nonsulfonated diamine. Flexible and tough membranes of high mechanical strength were obtained by solution casting and the electrolyte properties of the polymers were intensively investigated. The copolymer membranes exhibited excellent oxidative stability due to the introducing of the CF₃ groups. The SPI membranes displayed desirable proton conductivity (0.52×10⁻¹–0.97×10⁻¹ S·cm⁻¹) and low methanol permeability (less than 2.8×10⁻⁷ cm²·s⁻¹). The highest proton conductivity (1.89×10⁻¹ S·cm⁻¹) was obtained for the SPI‐90 membrane at 80°C, with an IEC of 2.12 mequiv/g. This value is higher than that of Nafion 117 (1.7×10⁻¹ S·cm⁻¹). Furthermore, the hydrolytic stability of the obtained SPIs is better than the BDSA and ODADS based SPIs due to the hydrophobic CF₃ groups which protect the imide ring from being attacked by water molecules, in spite of its strong electron‐withdrawing behaviors.     

侧链磺化聚芳醚质子交换膜的研究进展

燃料电池是以氢气、甲醇等作为燃料的一种新型能量转化装置,其中质子交换膜燃料电池（Proton Exchange Membrane Fuel Cell, PEMFC）凭借其能量功率高、启动速度快和使用寿命长等优点已经在移动电源、潜艇和电动汽车等领域得到了广泛应用。质子交换膜（Proton Exchange Membrane, PEM）对PEMFC的性能影响最大,高效的PEMFC需要PEM具有高的质子电导率、良好的热稳定性和机械性能、低燃料渗透率以及优异的物理化学稳定性等。目前市面上多数使用的均是具有优异质子电导率的Nafion系列膜,但其存在制备困难、成本昂贵、质子电导率严重依赖湿度等缺点,在一定程度上限制了其发展。为了让PEM有更多的选择,科学家一直专注于使用新材料替代Nafion膜。近年来,科学家们模拟Nafion结构,通过合成各种侧链含磺酸基团的聚芳醚结构,使得亲水基团磺酸基和疏水基团之间形成微相分离结构,从而获得了一系列具有优异综合性能的PEM。本文将重点对侧链烷基磺化型、侧链磺化嵌段型、侧链局部密集磺化型、侧链磺化交联型和侧链磺化复合型这几种常见策略的合成方法及性能进行了综述,最后展望了侧链磺化聚芳醚在PEM领域的优势及发展前景。     

Ozonated Graphene Oxide Film as a Proton‐Exchange Membrane

Graphene oxide (GO) contains several chemical functional groups that are attached to the graphite basal plane and can be manipulated to tailor GO for specific applications. It is now revealed that the reaction of GO with ozone results in a high level of oxidation, which leads to significantly improved ionic (protonic) conductivity of the GO. Freestanding ozonated GO films were synthesized and used as efficient polymer electrolyte fuel cell membranes. The increase in protonic conductivity of the ozonated GO originates from enhanced proton hopping, which is due to the higher content of oxygenated functional groups in the basal planes and edges of ozonated GO as well as the morphology changes in GO that are caused by ozonation. The results of this study demonstrate that the modification of dispersed GO presents a powerful opportunity for optimizing a nanoscale material for proton‐exchange membranes.     

磺化聚苯醚酮质子交换膜的制备与表征

设计、合成了一种含氰基双氯单体,其结构特点是氰基分布在3个以间位醚键相连的苯环上。以此单体和2,5-二氯-3'-磺酸钠二苯甲酮为原料,利用Ni(0)催化偶联反应制备了微嵌段型质子交换膜材料(中等长度磺化聚苯-三氰基聚苯醚酮共聚物(m-SPP-co-PAEK 3CN x),x代表聚合物的离子交换容量)。结果表明,与相同离子交换容量的磺化聚合物相比,该类聚合物膜表现出较低的吸水、溶胀率和较低的甲醇渗透性能。以离子交换容量2.16为例,80℃下,m-SPP-co-PAEK 3CN 2.16的吸水率、溶胀率分别为29.7%、28.2%,而SPP-co-PAEK MO 2.33的吸水率、溶胀率分别为80.2%、37.2%。25℃下,二者的甲醇渗透系数分别为2.38和7.20。聚合物骨架结构中存在丰富的氰基基团,导致膜具有良好的尺寸稳定性和较低的甲醇渗透性能。基于这些优异的性能,新制备的膜材料在燃料电池领域显示了潜在的应用前景。     

Blends of Sulfonated Polysulfone and Poly(ethylene oxide)-Grafted-Polyethersulfone as Proton Exchange Membranes for Fuel Cell Applications

Blends composed of sulfonated polysulfone (SPSF) and poly(ethylene oxide)-grafted-polyethersulfone (PEO-g-PES) in different compositions have been prepared and studied in terms of fuel cell relevant parameters like thermal behaviour, water uptake and ionic conductivity. Moreover, spectroscopic characterization (FT-IR) has also been conducted in order to elucidate their miscibility and to investigate the influence of polymer blending on the crystallinity level of the individual components. These blends exhibit very good mechanical properties, a very high water uptake and a high ionic conductivity (4 × 10⁻³ S/cm) at ambient temperatures and they are amorphous, a property that facilitates their use as polymer electrolytes in fuel cells.     

微孔聚四氟乙烯增强复合质子交换膜研究

质子交换膜燃料电池(PEMFC)由于具有能量转化率高、环保等特点而受到广泛关注。作为质子交换膜燃料电池核心组件之一的关键材料质子交换膜(PEM)成为燃料电池研究的热点。聚四氟乙烯(PTFE)微孔膜由于具有高的化学和尺寸稳定性,被用来作为复合质子交换膜的增强基底。本文对当前微孔PTFE增强复合质子交换膜的研究进展进行了综述,介绍了微孔PTFE与全氟类离子树脂、部分含氟类离子树脂和非氟类离子树脂等的复合情况,着重说明各种复合增强的类型和方式,并比较了复合改性前后各种膜的物性特点,最后展望了微孔PTFE复合增强膜的未来研究趋势。     

氧化石墨烯分离膜机械性能调控

氧化石墨烯(Graphene oxide,GO)片层组装制备的分离膜,具有可调控的纳米通道和独特的分离性能,是一种很有前景的分离材料,但较差的机械性能制约了其实际应用.将活性分子、阳离子等粒子引入到GO膜的片层间,利用其与GO形成的稳定键合可提高GO膜的机械性能.本文综述了国内外在GO膜机械性能调控方面的研究进展.依据...     

Investigation on the Use of Graphene Oxide as Novel Surfactant for Stabilizing Carbon Based Materials

The present work reported on the use of graphene oxide (GO) as effective dispersant to isolate different carbon allotropes. The nature of its chemical structure which consists of hydrophobic and hydrophilic components enables GO to behave as surfactant, paving routes for dissolution of graphitic materials and achieving surfactant free all-carbon solutions. Two additional carboneous materials under the family of fullerene (carbon nanofiber—CNF) and graphite (graphene nanoplatelets—GnP) were introduced within the present study to form a new GO based hybrid complexes on top of the commonly investigated carbon nanotube (CNT) based GO hybrid. Investigation on GO stability with respect to particle size and zeta potential measurements showed that the strength of its dispersibility was highly dependent on its morphological size and less affected by the pH. Rheological study revealed that GO shear–strain relationship is highly sensitive to the particle size. The GO viscosity experienced dramatic changes from Newtonian toward shear thinning behaviors as the particle size increases. Thermal conductivity measurement highlighted as high as 8% increase in magnitude with the addition of CNT, CNF, and GnP carbon constituents, indicating that the enhancement may be attributed to the much efficient thermal transport along the conducting path of pristine carbon allotropes.     

Synthesis and Properties of Novel Side‐Chain Sulfonated Poly(Arylene Ether Sulfone)s for Proton Exchange Membranes

A series of novel side‐chain sulfonated poly(arylene ether sulfone) (SPAES) multiblock and random copolymers were synthesized by condensation polymerization from a new disulfonated aryl sulfone monomer, 4,4′‐difluoro‐2,2′‐bis(3‐sulfobenzoyl)diphenyl sulfone disodium salt (DFBSPS). The chemical structures of DFBSPS and the SPAESs were characterized by proton nuclear magnetic resonance (¹H NMR) and Fourier transform infrared (FTIR) spectra. The SPAES membranes prepared by solution cast method exhibited high tensile strength (50–71 MPa) and high radical oxidative stability. They could keep their morphology and maintain proton conductivities after hydrolysis test in 95 °C water for 1000 h. They also showed smaller swelling ratio in in‐plane direction than in through‐plane direction and such an anisotropic effect was more significant for the multiblock copolymers than for the random ones. The multiblock copolymer membranes exhibited higher proton conductivity than the random ones with similar ion exchange capacities (IECs). Preliminary hydrogen‐oxygen fuel cell tests were performed at 60 °C and 80% relative humidity (RH). The results showed that the single cell equipped with the multibiock copolymer membrane SB3 exhibited 0.12 W cm^?2 higher maximum output power density than the one equipped with the random copolymer membrane SR3 (with the same IEC), indicating much better performance of the former. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2304–2313     

Membranes with Fast and Selective Gas‐Transport Channels of Laminar Graphene Oxide for Efficient CO2 Capture

Graphene oxide (GO) nanosheets were engineered to be assembled into laminar structures having fast and selective transport channels for gas separation. With molecular‐sieving interlayer spaces and straight diffusion pathways, the GO laminates endowed as‐prepared membranes with excellent preferential CO₂ permeation performance (CO₂ permeability: 100 Barrer, CO₂/N₂ selectivity: 91) and extraordinary operational stability (>6000 min), which are attractive for implementation of practical CO₂ capture.     

质子交换膜用磺化聚芳醚的合成与性能研究

合成了一种用于质子交换膜的新型磺化聚芳醚. 由于特殊单体结构的设计, 在聚合物主链上引入取代基对主链进行保护, 用氯磺酸直接磺化方法在聚芳醚高分子侧基上引入磺酸功能基, 实现了聚合物磺化结构的可控定位合成, 得到了稳定性较好的磺化聚芳醚. 用溶液浇膜法制备了质子交换膜, 考察了质子交换膜的各种性能. 结果表明, 这种膜具有良好的成膜性, 水解性稳定性和优异热稳定性能, 5%的热失重温度为362.3 ℃. 氧化稳定性在80 ℃的Fenton’s试剂(3%的过氧化氢和2 mg/L的FeSO₄)中进行, 膜在69 min时才开始变碎, 表现出良好的氧化稳定性.     

Synthesis and Characterization of New Phosphorus Containing Sulfonated Polytriazoles for Proton Exchange Membrane Application

Sulfonated polytriazoles have drawn a great attention as high performance polymers and their good film forming ability. In the present study, a phosphorus containing new diazide monomer namely, bis-[4-(4′-aminophenoxy)phenyl]phenylphosphine was synthesized and accordingly, a series of phosphorus containing sulfonated polytriazoles (PTPBSH-XX) was synthesized by reacting equimolar amount of this diazide monomer (PAZ) in combination with another sulfonated diazide monomer (DSAZ) and a terminal bis-alkyne (BPALK) by the Cu (I) catalyzed azide–alkyne click polymerization. The polymers were characterized by nuclear magnetic resonance (¹H, ¹³C, ³¹P NMR) and Fourier transform infrared spectroscopic techniques. The sulfonic acid content of the copolymers also determined from the different integral values obtained from the ¹H NMR signals. The small-angle X-ray scattering results unfolded the well-separated dispersion of the hydrophilic and hydrophobic domains of the polymers. As a whole, the copolymer membranes displayed sufficient thermal, mechanical, and oxidative stabilities high with high proton conductivity and low water uptake that are essential for proton exchange membrane applications. The copolymers exhibited oxidative stability in the range of 15–24 h and had proton conductivity values were found as high as 38–110 mS cm⁻¹ at 80 °C in completely hydrated condition. Among the all copolytriazoles, PTPBSH-90 (BPALK:DSAZ:PAZ = 100:90:10) having IEC_W = 2.44 mequiv g⁻¹, showed proton conductivity as high as 119 mS cm⁻¹ at 90 °C with an activation energy of 10.40 kJ mol⁻¹ for the proton conduction. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 263–279     

含羧基交联型质子交换膜的制备及其性能

合成了一种含酯基的磺化聚合物,利用后水解的方法得到了含有羧基侧基的聚合物;将磺化聚合物与聚乙烯醇通过溶液共混,热处理后得到交联型的共混膜材料。 研究结果表明,膜材料的玻璃化转变温度(Tg)有明显的上升,证明了交联反应的发生;同时,膜的吸水率和溶胀率有一定的下降,力学性能和热稳定性也有一定的提升。 通过共价交联的方法,制备了综合性能优异的磺化聚芳醚质子交换膜材料。 在100 ℃,交联膜的质子传导率为0.072~0.065 S/cm,吸水率为51%~89%,溶胀率为19%~30%。     

Proton Conductivities of Graphene Oxide Nanosheets: Single,Multilayer, and Modified Nanosheets

Proton conductivities of layered solid electrolytes can be improved by minimizing strain along the conduction path. It is shown that the conductivities (σ) of multilayer graphene oxide (GO) films (assembled by the drop‐cast method) are larger than those of single‐layer GO (prepared by either the drop‐cast or the Langmuir‐Blodgett (LB) method). At 60 % relative humidity (RH), the σ value increases from 1×10^?6 S cm^?1 in single‐layer GO to 1×10^?4 and 4×10^?4 S cm^?1 for 60 and 200 nm thick multilayer films, respectively. A sudden decrease in conductivity was observed for with ethylenediamine (EDA) modified GO (enGO), which is due to the blocking of epoxy groups. This experiment confirmed that the epoxide groups are the major contributor to the efficient proton transport. Because of a gradual improvement of the conduction path and an increase in the water content, σ values increase with the thickness of the multilayer films. The reported methods might be applicable to the optimization of the proton conductivity in other layered solid electrolytes.     

超级电容器用石墨烯/金属氧化物复合材料

超级电容器是一种具有高功率密度和长循环寿命的新型储能装置,碳材料、金属氧化物和导电聚合物是常见的三种超级电容器电极材料。在石墨烯/金属氧化物复合材料中,石墨烯和金属氧化物可以发挥各自的优点,结合石墨烯优异的循环稳定性能和金属氧化物的高容量特性,纳米复合材料的综合性能可以得到很大地提升。因此,石墨烯/金属氧化物复合物的研究是超级电容器领域的热点研究方向之一。本文以金属氧化物的种类、石墨烯的结构和复合物的制备方法为线索,综述了国内外应用于超级电容器方面的石墨烯/金属氧化物复合材料的研究进展,归纳总结出与石墨烯复合最优的金属氧化物类型和制备方法,并进一步对该类复合材料的发展趋势进行了展望。     

Zeolitic Imidazolate Framework/Graphene Oxide Hybrid Nanosheets as Seeds for the Growth of Ultrathin Molecular Sieving Membranes

A defect‐free zeolitic imidazolate framework‐8 (ZIF‐8)/graphene oxide (GO) membrane with a thickness of 100 nm was prepared using two‐dimensional (2D) ZIF‐8/GO hybrid nanosheets as seeds. Hybrid nanosheets with a suitable amount of ZIF‐8 nanocrystals were essential for producing a uniform seeding layer that facilitates fast crystal intergrowth during membrane formation. Moreover, the seeding layer acts as a barrier between two different synthesis solutions, and self‐limits crystal growth and effectively eliminates defects during the contra‐diffusion process. The resulting ultrathin membranes show excellent molecular sieving gas separation properties, such as with a high CO₂/N₂ selectivity of 7.0. This 2D nano‐hybrid seeding strategy can be readily extended to the fabrication of other defect‐free and ultrathin MOF or zeolite molecular sieving membranes for a wide range of separation applications.     

燃料电池用高温质子交换膜

与传统质子交换膜燃料电池相比,高温质子交换膜燃料电池(HT-PEMFCs)不仅可以提高催化剂对CO 的耐受能力,还能简化水热管理,提高能量转化效率.高温质子交换膜是实现高温操作的关键部件之一.掺杂无机磷酸的高温质子交换膜因为在高温度(100～200℃)和低相对湿度下具有较高的质子传导率,以及较长使用寿命而成为研究的热点...