An ab initio and density functional theory study of the structure and bonding of sulfur ylides

Sulfur ylides are useful synthetic intermediates that are formed from the interaction between singlet carbenes and sulfur-containing molecules. Partial double-bond character frequently has been proposed as a key contributor to the stability of sulfur ylides. Calculations at the B3LYP, MP2, and CCSD(T) levels of theory employing various basis sets have been performed on the sulfur ylides H(2)S-CH(2) and (CH(3))(2)S-CH(2) in order to investigate the structure and bonding of these systems. The following general properties of sulfur ylides were observed from the computational studies: C-S bond distances that are close in length to that of a typical C-S double bond, high charge transfer from the sulfide to the carbene, and large torsional rotation barriers. Analysis of the sulfur ylide charge distribution indicates that the unusually short C-S bond distance can be attributed in part to the electrostatic attraction between highly oppositely charged carbon and sulfur atoms. Furthermore, n --> sigma* stabilization arising from donation of electron density from the carbon lone pair orbital into S-H or S-C antibonding orbitals leads to larger than expected torsional barriers. Finally, natural resonance theory analysis indicates that the bond order of the sulfur ylides H(2)S-CH(2) and (CH(3))(2)S-CH(2) is 1.4-1.5, intermediate between a single and double bond.     

Theoretical reinvestigation of opposite electronic effects on bond lengths in thiophenols and thiophenolic radicals

Our previous study has revealed that para-substituents have opposite electronic effects on the C-S bond lengths of thiophenols and thiophenolic radicals. Although a theoretical elucidation has been given, it has not been supported by theoretically calculated atomic charges. To give an alternative explanation, we calculated the C-S bond lengths, C-S bond electron densities, and Mulliken charges on the carbon and sulfur atoms for thiophenols, thiophenolic radicals, and thiophenolic radical cations by means of the B3LYP density functional theory method using the 6-31G(d, p) basis set. It was revealed that the C-S bond length is adequately defined in terms of C-S bond electron density. The distinct electronic effects on the C-S bond lengths of thiophenols, thiophenolic radicals and thiophenolic radical cations are well elucidated by the different electronic states (electron-deficient or-rich) of the phenyl ring and SH group.     

Reactions of [aryloxy(phenyl)carbene]pentacarbonylchromium(0) complexes with thiolate ions. Decreasing reactivity with increasing basicity of the nucleophile

A kinetic study of the reactions of thiolate ions with three Fischer-type [aryloxy(phenyl)carbene]pentacarbonyl chromium(0) complexes in 50% MeCN-50% water (v/v) is reported. Br?nsted plots of the second-order rate constants are biphasic with an initial steep rise for weakly basic thiolate ions (beta(nuc) approximately equal to 1.0) followed by a slightly descending leg with a negative slope (beta(nuc) approximately equal to -0.2) for strongly basic thiolate ions. This indicates a change from rate-limiting leaving group departure at low pK(RSH)(a) to rate-limiting nucleophilic attachment at high pK(RSH)(a). The negative beta(nuc) values result from a combination of minimal progress of C-S bond formation at the transition state and the requirement for partial desolvation of the nucleophile before it enters the transition state. Possible factors that may affect the degree of bond formation in reactions of Fischer carbene complexes as well as reactions of other unsaturated electrophiles with thiolate ions are discussed.     

Photosensitized oxidation of alkyl phenyl sulfoxides. C-S bond cleavage in alkyl phenyl sulfoxide radical cations

The 3-cyano-N-methylquinolinium perchlorate (3-CN-NMQ(+)ClO4(-))-photosensitized oxidation of phenyl alkyl sulfoxides (PhSOCR1R2R3, 1, R1 = R2 = H, R3 = Ph; 2, R1 = H, R2 = Me, R3 = Ph; 3, R1 = R2 = Ph, R3 = H; 4, R1 = R2 = Me, R3 = Ph; 5, R1 = R2 = R3 = Me) has been investigated by steady-state irradiation and nanosecond laser flash photolysis (LFP) under nitrogen in MeCN. Steady-state photolysis showed the formation of products deriving from the heterolytic C-S bond cleavage in the sulfoxide radical cations (alcohols, R1R2R3COH, and acetamides, R1R2R3CNHCOCH3) accompanied by sulfur-containing products (phenyl benzenethiosulfinate, diphenyl disulfide, and phenyl benzenethiosulfonate). By laser irradiation, the formation of 3-CN-NMQ(*) (lambda(max) = 390 nm) and sulfoxide radical cations 1(*+) , 2(*+), and 5(*+) (lambda(max) = 550 nm) was observed within the laser pulse. The radical cations decayed by first-order kinetics with a process attributable to the heterolytic C-S bond cleavage leading to the sulfinyl radical and an alkyl carbocation. The radical cations 3(*+) and 4(*+) fragment too rapidly, decaying within the laser pulse. The absorption band of the cation Ph2CH(+) (lambda(max) = 440 nm) was observed with 3 while the absorption bands of 3-CN-NMQ(*) and PhSO(*) (lambda(max) = 460 nm) were observed just after the laser pulse in the LFP experiment with 4. No competitive beta-C-H bond cleavage has been observed in the radical cations from 1-3. The C-S bond cleavage rates were measured for 1(*+), 2(*+), and 5(*+). For 3(*+) and 4(*+), only a lower limit (ca. >3 x 10(7) s(-1)) could be given. Quantum yields (Phi) and fragmentation first-order rate constants (k) appear to depend on the structure of the alkyl group and on the bond dissociation free energy (BDFE) of the C-S bond of the radical cations determined by a thermochemical cycle using the C-S BDEs for the neutral sulfoxides 1-5 obtained by DFT calculations. Namely, Phi and k increase as the C-S BDFE becomes more negative, that is in the order 1 < 5 < 2 < 3, 4, which is also the stability order of the alkyl carbocations formed in the cleavage. An estimate of the difference in the C-S bond cleavage rate between sulfoxide and sulfide radical cations was possible by comparing the fragmentation rate of 5(*+) (1.4 x 10(6) s(-1)) with the upper limit (10(4) s(-1)) given for tert-butyl phenyl sulfide radical cation (Baciocchi, E.; Del Giacco, T.; Gerini, M. F.; Lanzalunga, O. Org. Lett. 2006, 8, 641-644). It turns out that sulfoxide radical cations undergo C-S bond breaking at a rate at least 2 orders of magnitude faster than that of corresponding sulfide radical cations.     

The first N-heterocyclic carbene-based nickel catalyst for C-S coupling

We have developed the first N-heterocyclic carbene (NHC)-based transition metal catalysts for C-S coupling reactions. Ni-NHC catalysts showed good to excellent activities toward various aryl halides in C-S coupling reactions. The catalytic activities were greatly affected by the electronic and steric properties of the NHC ligands. The new catalysts were inexpensive, easy to synthesize, and environmentally friendly. They could be excellent candidates to replace Pd-organophosphanes for C-S coupling catalysis.     

Structure and C-S bond cleavage in aryl 1-methyl-1-arylethyl sulfide radical cations

Steady state and laser flash photolysis (LFP) of a series of p-X-cumyl phenyl sulfides (4-X-C(6)H(4)C(CH(3))(2)SC(6)H(5): 1, X = Br; 2, X = H; 3, X = CH(3); 4, X = OCH(3)) and p-X-cumyl p-methoxyphenyl sulfides (4-X-C(6)H(4)C(CH(3))(2)SC(6)H(4)OCH(3): 5, X = H; 6, X = CH(3); 7, X = OCH(3)) has been carried out in the presence of N-methoxy phenanthridinium hexafluorophosphate (MeOP(+)PF(6)(-)) under nitrogen in MeCN. Steady state photolysis showed the formation of products deriving from the C-S bond cleavage in the radical cations 1(+?)-7(+?) (2-aryl-2-propanols and diaryl disulfides). Formation of 1(+?)-7(+?) was also demonstrated by LFP experiments evidencing the absorption bands of the radical cations 1(+?)-3(+?) (λ(max) = 530 nm) and 5(+?)-7(+?) (λ(max) = 570 nm) mainly localized in the arylsulfenyl group and radical cation 4(+?) (λ(max) = 410, 700 nm) probably mainly localized in the cumyl ring. The radical cations decayed by first-order kinetics with a process attributable to the C-S bond cleavage. On the basis of DFT calculations it has been suggested that the conformations most suitable for C-S bond cleavage in 1(+?)-4(+?) and 7(+?) are characterized by having the C-S bond almost collinear with the π system of the cumyl ring and by a significant charge and spin delocalization from the ArS ring to the cumyl ring. Such a delocalization is probably at the origin of the observation that the rates of C-S bond cleavage result in very little sensitivity to changes in the C-S bond dissociation free energy (BDFE). A quite large reorganization energy value (λ = 43.7 kcal mol(-1)) has been calculated for the C-S bond scission reaction in the radical cation. This value is much larger than that (λ = 12 kcal mol(-1)) found for the C-C bond cleavage in bicumyl radical cations, a reaction that also leads to cumyl carbocations.     

Methandiide as a Non‐Innocent Ligand in Carbene Complexes: From the Electronic Structure to Bond Activation Reactions and Cooperative Catalysis

The synthesis of a ruthenium carbene complex based on a sulfonyl‐substituted methandiide and its application in bond activation reactions and cooperative catalysis is reported. In the complex, the metal–carbon interaction can be tuned between a Ru?C single bond with additional electrostatic interactions and a Ru?C double bond, thus allowing the control of the stability and reactivity of the complex. Hence, activation of polar and non‐polar bonds (O?H, H?H) as well as dehydrogenation reactions become possible. In these reactions the carbene acts as a non‐innocent ligand supporting the bond activation as nucleophilic center in the 1,2‐addition across the metal–carbon double bond. This metal–ligand cooperativity can be applied in the catalytic transfer hydrogenation for the reduction of ketones. This concept opens new ways for the application of carbene complexes in catalysis.     

Carbon-sulfur bond cleavage in Bis(N-alkyldithiocarbamato)cadmium(II) complexes: heterolytic desulfurization coupled to topochemical proton transfer

Three bis(N-alkyldithiocarbamato)cadmium(II) complexes [Cd(S(2)CNHR)(2)] (1, R = n-C(3)H(7); 2, R = n-C(5)H(11); 3, n-C(12)H(25)) were prepared by metathesis of the corresponding lithium salt, Li[S(2)CNHR], with cadmium chloride. The crystal structures of 2 and 3 consist of planar molecular units of [Cd(S(2)CNHR)(2)] connected by intermolecular Cd.S interactions to give a one-dimensional chain. The chains are connected by a network of intermolecular N-H.S hydrogen bonds between the dithiocarbamato nitrogen atom and bridging sulfur atoms in neighboring chains. In solution, the (113)Cd NMR spectrum of 2 is dependent on concentration and temperature, indicative of a dimerization equilibrium mediated by similar Cd.S intermolecular bridging interactions. In the solid state, thermal gravimetric analyses show that all three complexes decompose smoothly via a heterolytic C-S bond cleavage reaction to give the corresponding alkyl isothiocyanate and cadmium sulfide as the primary products, with the formation of primary amine and CS(2) as coproducts. These products can result only from the net transfer of protons between N-alkyldithiocarbamato ligands in the solid state. Thus, the C-S bond cleavage reaction is interpreted in terms of the topochemical arrangement of molecular units in the crystalline state, which provides a pathway for proton transfer between ligands via N-H.S hydrogen bonds. Decomposition was also initiated by addition of a tertiary amine to a solution of [Cd(S(2)CNHR)(2)]. This confirms that C-S bond cleavage must be coupled to deprotonation of the -NH group, and explains why dialkylated derivatives [Cd(S(2)CNR(2))(2)] are inert to this particular mode of C-S bond cleavage. This system thus constitutes an unusual example of heterolytic, nonoxidative C-S bond cleavage that appears to proceed by a topochemical transfer of protons, which has implications for C-S bond cleavage processes in single-source precursors for II-VI semiconductor materials.     

Formation of a sulfur-atom-inserted N-confused porphyrin iron nitrosyl complex by denitrosation and C-S bond cleavage of an S-nitrosothiol

The reaction of nitrosothiol, Ph3CSNO, with a divalent iron N-confused porphyrin complex, Fe(HCTPPH)Br, yields a {Fe(NO)}6 iron nitrosyl complex with a sulfur atom inserted in the Fe-C bond. The crystal structure reveals a bent Fe-N-O geometry and an eta2-(C,S) bonding mode between iron and the C-S bond. A reaction mechanism involving a transnitrosation and a nitrosothiol C-S bond cleavage is proposed.     

C-S bond formation reaction between a phenolate and disulfide-bridged dicopper(I) complexes

A novel C-S bond formation reaction took place, when a lithium phenolate derivative was treated with a disulfide-bridged dicopper(I) complex or a bis(micro-thiolato)dicopper(II) complex under very mild conditions. The reaction has been suggested to proceed via a disulfide-bridged (micro-phenoxo)dicopper(I) complex as the common reaction intermediate. Copper(II) complexes of the modified ligands containing a thioether group (products of the C-S bond formation reaction) have been isolated and structurally characterized by X-ray analysis as model compounds of the active site of galactose oxidase. Mechanism of the C-S bond formation reaction is also discussed in relation to the biosynthetic mechanism of the organic cofactor Tyr-Cys of galactose oxidase.     

Selectivity in the oxidative addition of C-S bonds of substituted thiophenes to the (C5Me5)Rh(PMe3) fragment: a comparison of theory with experiment

Theoretical studies were performed on the C-S bond activation reactions of 2-/3-cyanothiophene, 2-/3-methoxythiophene, and 2-/3-methylthiophene with the [Rh(PMe3)(C5Me5)] fragment to compare with the selectivity of these reactions observed in the experimental study, with the goal of determining whether the latter represent kinetic or thermodynamic products. Density functional theory (DFT) calculations have been used to optimize the ground-state structures of the two possible insertion products and the transition state structures leading to the formation of the products arising from the above cleavage reactions to address this question. With the 2-cyano and 2-methoxy substituents, the observed formation of one product resulting from the exclusive insertion of the rhodium into the more hindered substituted C-S bond was found to be consistent with the calculated energy differences between the ground states of the two possible products (7.6 and 2.6 kcal mol(-1)). With 2-methylthiophene, the product resulting from the activation of the unsubstituted C-S bond is calculated to be favored by 5.8 kcal mol(-1), in agreement with observed results. The approximately 1:1 ratio of products with 3-cyano and 3-methyl substituted thiophenes are also found to be consistent with the small calculated energy differences (0.4 and 0.8 kcal mol(-1)) between the ground states of the two insertion products. Although the observed high selectivity in the formation of a single C-S bond activation product with 3-methoxythiophene appears to be underestimated in the calculations, the observed products for all substituted thiophenes correlate with the calculated thermodynamic products. In addition, the kinetic selectivities predicted based on the calculated C-S bond activation barriers are different from those observed experimentally. Consequently, these investigations demonstrate that DFT calculations can be used reliably to differentiate if an experimentally observed C-S bond activation reaction proceeds under thermodynamic or kinetic control.     

The effects of C-S and C-Se bonds on torquoselectivity: stereoselective olefination of α-thio and α-selenoketones with ynolates

Highly Z-selective olefination of acyclic α-thio and α-selenoketones with ynolates has been achieved, and the theoretical calculations of the transition states in the ring-opening of the intermediates, the β-lactone enolates, revealed that the torquoselectivity was controlled by the secondary orbital interactions between the σ orbital of the C-S bond or a lone pair orbital on the S and σ^∗ orbitals of the breaking C-O bond, and the σ orbital of the breaking C-O bond or a lone pair orbital on the O on the ring and the σ^∗ orbitals of the C-S bond. The synthetic applications of the resulting olefins are also shown.     

Structural and solvent effects on the C-S bond cleavage in aryl triphenylmethyl sulfide radical cations

Steady-state and laser flash photolysis (LFP) studies of a series of aryl triphenylmethyl sulfides [1, 3,4-(CH(3)O)(2)-C(6)H(3)SC(C(6)H(5))(3); 2, 4-CH(3)O-C(6)H(4)SC(C(6)H(5))(3); 3, 4-CH(3)-C(6)H(4)SC(C(6)H(5))(3); 4, C(6)H(5)SC(C(6)H(5))(3); and 5, 4-Br-C(6)H(4)SC(C(6)H(5))(3)] has been carried out in the presence of N-methoxyphenanthridinium hexafluorophosphate in CH(3)CN, CH(2)Cl(2), CH(2)Cl(2)/CH(3)CN, and CH(2)Cl(2)/CH(3)OH mixtures. Products deriving from the C-S bond cleavage in the radical cations 1(?+)-5(?+) have been observed in the steady-state photolysis experiments. Time-resolved LFP showed first-order decay of the radical cations accompanied by formation of the triphenylmethyl cation. A significant decrease of the C-S bond cleavage rate constants was observed by increasing the electron-donating power of the arylsulfenyl substituent, that is, by increasing the stability of the radical cations. DFT calculations showed that, in 2(?+) and 3(?+), charge and spin densities are mainly localized in the ArS group. In the TS of the C-S bond cleavage an increase of the positive charge in the trityl moiety and of the spin density on the ArS group is observed. The higher delocalization of the charge in the TS as compared to the initial state is probably at the origin of the observation that the C-S bond cleavage rates decrease by increasing the polarity of the solvent.     

Irreversible cleavage of a carbene-rhodium bond in Rh-N-heterocyclic carbene complexes: implications for catalysis

Despite the generally accepted belief that carbene-metal bonds are strong and do not dissociate, the reaction of Rh-N-heterocyclic carbene complexes with triphenylphosphine in dichloroethane was determined to take place via cleavage of the Rh-carbene bond. The products of this reaction are Wilkinson’s catalyst and a bisimidazolium salt derived from reaction between dichloroethane and two equivalents of the carbene. The implications of this reaction for catalysis are significant since the carbene complex shows lower activity than Wilkinson’s catalyst in hydrogenation reactions. In non-halogenated solvents, the catalyst shows higher stability, such that the rate of exchange with free phosphine could be measured, and was determined to be ca. 10 times slower than in Wilkinson’s catalyst.     

A novel salt bridge mechanism highlights the need for nonmobile proton conditions to promote disulfide bond cleavage in protonated peptides under low-energy collisional activation

The gas-phase fragmentation mechanisms of small models for peptides containing intermolecular disulfide links have been studied using a combination of tandem mass spectrometry experiments, isotopic labeling, structural labeling, accurate mass measurements of product ions, and theoretical calculations (at the MP2/6-311 + G(2d,p)//B3LYP/3-21G(d) level of theory). Cystine and its C-terminal derivatives were observed to fragment via a range of pathways, including loss of neutral molecules, amide bond cleavage, and S-S and C-S bond cleavages. Various mechanisms were considered to rationalize S-S and C-S bond cleavage processes, including charge directed neighboring group processes and nonmobile proton salt bridge mechanism. Three low-energy fragmentation pathways were identified from theoretical calculations on cystine N-methyl amide: (1) S-S bond cleavage dominated by a neighboring group process involving the C-terminal amide N to form either a protonated cysteine derivative or protonated sulfenyl amide product ion (44.3 kcal mol(-1)); (2) C-S bond cleavage via a salt bridge mechanism, involving abstraction of the alpha-hydrogen by the N-terminal amino group to form a protonated thiocysteine derivative (35.0 kcal mol(-1)); and (3) C-S bond cleavage via a Grob-like fragmentation process in which the nucleophilic N-terminal amino group forms a protonated dithiazolidine (57.9 kcal mol(-1)). Interestingly, C-S bond cleavage by neighboring group processes have high activation barriers (63.1 kcal mol(-1)) and are thus not expected to be accessible during low-energy CID experiments. In comparison to the energetics of simple amide bond cleavage, these S-S and C-S bond cleavage reactions are higher in energy, which helps rationalize why bond cleavage processes involving the disulfide bond are rarely observed for low-energy CID of peptides with mobile proton(s) containing intermolecular disulfide bonds. On the other hand, the absence of a mobile proton appears to "switch on" disulfide bond cleavage reactions, which can be rationalized by the salt bridge mechanism. This potentially has important ramifications in explaining the prevalence of disulfide bond cleavage in singly protonated peptides under MALDI conditions.     

Activation of CS2 and CS by ML3 complexes

The aim of this study was to determine the best neutral ML3 metal complexes for activating and cleaving the multiple bonds in CS2 and CS. Current experimental results show that, so far, only one bond in CS2 can be cleaved, and that CS can be activated but the bond is not broken. In the work described in this paper, density functional theory calculations have been used to evaluate the effectiveness of different ML3 complexes to activate the C-S bonds in CS2 and CS, with M = Mo, Re, W, and Ta and L = NH2. These calculations show that the combination of Re and Ta in the L3Re/CS2/TaL3 complex would be the most promising system for the cleavage of both C-S bonds of CS2. The reaction to cleave both C-S bonds is predicted to be exothermic by about 700 kJ mol(-1) and to proceed in an almost barrierless fashion. In addition, we are able to rationalize why the breaking of the C-S bond in CS has not been observed experimentally with M = Mo: this reaction is strongly endothermic. There is a subtle interplay between charge transfer and pi back-donation, and it appears that the Mo-C and Mo-S bonds are not strong enough to compensate for the breaking of the C-S bond. Our results suggest that, instead, CS could be cleaved with ReL3 or, even better, with a combination of ReL3 and TaL3. Molecular orbitals and Mulliken charges have been used to help explain these trends and to make predictions about the most promising systems for future experimental exploration.     

C-C alpha insertion: insertion of an alkyne into the C-C single bond between the carbene-carbon atom and the alpha-carbon atom of a Fischer carbene complex by an unprecedented metalla(di-pi-methane) skeletal rearrangement

The first examples of insertion of a C(triple bond)C bond of an alkyne into a C(carbene)-Calpha single bond of a carbene complex (C-Calpha insertion) are reported. (prim-Alkyl)carbene complexes [(OC)(5)M=C(OEt)CH(2)R] (1 a-f; M=Cr, W; R=nPr, C(7)H(7), Ph) undergo C-Calpha insertion of electron-deficient alkynes [PhC(triple bond)CC(XEt)NMe(2)]BF(4) (5 a,b; X=O, S) to give zwitterionic carbiminium carbonylmetalates 3 a-g, which are thermally transformed into (CO)(4)M chelate carbene complexes 4 a-g by elimination of CO. The overall reaction is highly regio- and stereoselective. It involves an unprecedented metalla(di-pi-methane) rearrangement as the key step.     

Intramolecular Interception of the Remote Position of Vinylcarbene Silver Complex Intermediates by C(sp3)−H Bond Insertion

The trapping of the elusive vinylogous position of a vinyl carbene with an aliphatic C(sp³)−H bond has been achieved for the first time during a silver-catalyzed carbene/alkyne metathesis (CAM) process. A Tp^x-containing silver complex first promotes the generation of a donor-acceptor silver carbene which triggers CAM, generating a subsequent donor-donor vinyl silver carbene species, which then undergoes a selective vinylogous C(sp³)−H bond insertion, leading to the synthesis of a new family of benzoazepines. Density functional theory (DFT) calculations unveil the reaction mechanism, which allows proposing that the C−H bond insertion reaction takes place in a stepwise manner, with the hydrogen shift being the rate determining step.     

Efficient nickel/N-heterocyclic carbene catalyzed C-S cross-coupling

The cross-coupling reaction of aryl halides with aliphatic and aromatic thiols catalyzed by readily available Ni(OAc)₂ with N-heterocyclic carbene (NHC) is reported. Ni(OAc)₂/NHC catalyst showed good activities toward various aryl halides in C-S coupling reaction, even with aryl chlorides. Reactions occurred in excellent yields, broad scope, and high tolerance of functional groups.     

The [Ru(CN)5(pyS)](4-) complex, an efficient self-assembled monolayer for the cytochrome c heterogeneous electron transfer studies

The organothiol 4-mercaptopyridine (pyS) has been used extensively as facilitator for the assessment of heterogeneous electron transfer reaction of cytochrome c (cyt c). Its efficiency, however, is strongly affected by the instability of the adlayer due to the C-S bond cleavage. The K(4)[Ru(CN)(5)(pyS)].3H(2)O complex was synthesized and characterized aiming its utilization as an inorganic self-assembled monolayer (SAM) that would enhance the gold adlayer stability. The SAM formed by this complex onto gold (RupySAu) was characterized by spectroscopic (FTIRRAS and SERS) and electrochemical (LSV) techniques. The ex situ vibrational SERS and FTIRRAS spectra data of this SAM formed onto gold suggest a sigma interaction between the gold and sulfur atoms of the complex, inducing a perpendicular arrangement in relation to the surface normal. Additionally, SERS and FTIRRAS spectra performed for freshly prepared RupySAu adlayer and for large immersion times in the precursor solution have not shown any significant change that would reflect the degradation of the adlayer. The LSV desorption curves of this SAM indicate an enhancement in the C-S bond strength of the pyS ligand when coordinated to the [Ru(CN)(5)](3-) moiety. Comparatively to the data obtained for the desorption process of the pyS monolayer, the reductive desorption potential, E(rd), of the RupySAu presents a shift of -17 mV. This bond strength intensification leads to an increase in the stability of the monolayer. The voltammetric curves of cyt c carried out with the RupySAu electrode showed electrochemical parameters consistent with those reported for the native protein, as well as the maintenance of the electrochemical kinetic data after repetitive cycles. The results all together suggest that the pi back-bonding effect from the [Ru(CN)(5)](3-) metal center plays an important role in the stability of the RupySAu adlayer, improving the assessment of the cyt c heterogeneous electron transfer reaction.