Highly Selective Lithium Transport through Crown Ether Pillared Angstrom Channels

Biological ion channels use the synergistic effects of various strategies to realize highly selective ion sieving. For example, potassium channels use functional groups and angstrom-sized pores to discriminate rival ions and enrich target ions. Inspired by this, we constructed a layered crystal pillared by crown ether that incorporates these strategies to realize high Li⁺ selectivity. The pillared channels and crown ether have an angstrom-scale size. The crown ether specifically allows the low-barrier transport of Li⁺. The channels attract and enrich Li⁺ ions by up to orders of magnitude. As a result, our material sieves Li⁺ out of various common ions such as Na⁺, K⁺, Ca²⁺, Mg²⁺ and Al³⁺. Moreover, by spontaneously enriching Li⁺ ions, it realizes an effective Li⁺/Na⁺ selectivity of 1422 in artificial seawater where the Li⁺ concentration is merely 25 μM. We expect this work to spark technologies for the extraction of lithium and other dilute metal ions.     

Ion formation in fast atom bombardment mass spectrometry: a divided probe investigation of gas-phase reactions

Some ion-formation processes during fast atom bombardment (FAB) are discussed, especially the possibility of reactions in the gas phase. Divided (two halves) FAB probe tips were used for introducing two different samples into the source at the same time. Our results showed [M + A]⁺ ions (where M = crown ethers and A = alkali metal ions), can be produced, at least in part, in the gas phase when crown ethers and sources of alkali metal ion are placed on two halves of the FAB probe tip. The extent of this ion formation depends on the volatility of the crown ether and on steric factors. Cluster ions such as (M + LiCl)Li⁺, (2M + LiCl)Li⁺, [2M + K]⁺ and [2M + Na]⁺ are also observed to form in the gas phase. Unimolecular decompositions contribute to some ions detected in FAB. When the alkali ion salt and the crown ether are mixed together the probability of [M + A]⁺ ion formation increases significantly, regardless of the volatility of the crown ether.     

Fluorine-Rich Supramolecular Nano-Container Crosslinked Hydrogel for Lithium Extraction with Super-High Capacity and Extreme Selectivity

Extraction and recovery of lithium from reserves play a critical role in the sustainable development of energy due to the explosive growth of the lithium-battery market. However, the low efficiency of extraction and recovery seriously threatens the sustainability of lithium supply. In this contribution, we fabricate a novel mechanically robust fluorine-rich hydrogel, showing highly efficient Li⁺ extraction from Li-containing solutions. The hydrogel was facilely fabricated by simple one-pot polymerization of supramolecular nanosheets of fluorinated monomers, acrylic acid and a small amount of chemical crosslinkers. The hydrogel exhibits a remarkable lithium adsorption capacity (Q_m Li⁺=122.3 mg g⁻¹) and can be reused. Moreover, it can exclusively extract lithium ions from multiple co-existing metal ions. Notably, the separation of Li⁺/Na⁺ in actual wastewater is achieved with a surprising separation factor of 153.72. The detailed characterizations as well as calculation showed that the specific coordination of Li−F plays a central role for both of the striking recovery capability and selectivity for Li⁺. Furthermore, an artificial device was constructed, displaying high efficiency of extracting lithium in various complex actual lithium-containing wastewater. This work provides a new and promising avenue for the efficient extraction and recovery of lithium resource from complex lithium-containing solutions.     

Extraktion von alkali- und erdalkalimetallionen mit (sym-dibenzo-14-krone-4-oxy)- und (sym-dibenzo-16-krone-5-oxy)-carbonsäuren

(Extraction of alkali on alkaline earth metal ions with (sym-dibenzo-14-crown-4-oxy)- and (sym-dibenzo-16-crown-5-oxy)-carboxylic acids.)The extraction of lithium, sodium, potassium, calcium and some other metal ions with dibenzo-4-crown-4-oxy- and dibenzo-16-crown-5-oxycarboxylic acids containing the groups -CH₂COOH, -(CH₂)₂COOH, -(CH₂)₃COOH, -CH(C₂H₅)COOH and -CH(C₄H₉)COOH was studied. The extraction increases as a function of the lipophilic character of the carboxylic acid group. Calcium, barium and strontium ions are better extracted than Li⁺, Na⁺ and K⁺; there are only small differences among the alkaline earth metal ions. Evaluated from the extraction data, the composition of the extracted species was 1:1 (metal/ligand) for Li⁺, and 1:2 for CaCa²⁺; Na⁺ and K⁺ favour the formation of 1:2 complexes with dibenzo-14-crown-4-derivatives bbut 1:1 complexes with dibenzo-16-crown-5-oxy-carboxylic acids. The dependence of the distribution ratio on pH does not provide unequivocal evidence for the composition of the extracted compounds.     

Polystyrene Sulfonate Threaded through a Metal–Organic Framework Membrane for Fast and Selective Lithium‐Ion Separation

Extraction of lithium ions from salt‐lake brines is very important to produce lithium compounds. Herein, we report a new approach to construct polystyrene sulfonate (PSS) threaded HKUST‐1 metal–organic framework (MOF) membranes through an in situ confinement conversion process. The resulting membrane PSS@HKUST‐1‐6.7, with unique anchored three‐dimensional sulfonate networks, shows a very high Li⁺ conductivity of 5.53×10^?4 S cm^?1 at 25 °C, 1.89×10^?3 S cm^?1 at 70 °C, and Li⁺ flux of 6.75 mol m^?2 h^?1, which are five orders higher than that of the pristine HKUST‐1 membrane. Attributed to the different size sieving effects and the affinity differences of the Li⁺, Na⁺, K⁺, and Mg²⁺ ions to the sulfonate groups, the PSS@HKUST‐1‐6.7 membrane exhibits ideal selectivities of 78, 99, and 10296 for Li⁺/Na⁺, Li⁺/K⁺, Li⁺/Mg²⁺ and real binary ion selectivities of 35, 67, and 1815, respectively, the highest ever reported among ionic conductors and Li⁺ extraction membranes.     

Fluorescent PET chemosensors for lithium

The synthesis of the chiral diaza-9-crown-3 derivatives 1 (S,S) and 2 (R,R) is described. These sensors were designed as luminescent chemosensors for lithium where the fluorescence emission from the naphthalene moieties was ‘switched on’ upon Li⁺ recognition by the crown ether moiety in organic solvents, showing excellent selectivity over other group I and group II cations. Even though the recognition of Li⁺ was not achieved in water (pH 7.4) or aqueous alcohol solution, the fluorescence (which was switched on at pH 7.4) was substantially modulated by spherical anions, where the fluorescence emission was quenched in the presence of Br⁻ and I⁻ but less by Cl⁻ and not by acetate. This indicates that the emission was quenched by heavy-atom affect. The recognition of Li⁺ was also investigated by ¹H NMR in CD₃CN and by observing the changes in the circular dicromism spectra. For the former, the resonances for the crown ether moiety and α-methyl protons adjacent to the ring were sifted upfield and broadened, whereas for 1 the intensity of the CD signal for the π-π transition was substantially modulated upon Li⁺ recognition.     

Study of isotope effect upon lithium iodide complexation with benzo-15-crown-5 in water–chloroform extraction system

Extraction characteristics of chloroform–water system in lithium iodide extraction with benzo-15-crown-5 (B15C5) were studied. The complexation of the crown ether with LiI in organic phase was shown by IR spectroscopy. Isotope effect multiplication was performed by extraction chromatography technique. The magnitude of isotope separation factor (α) for ⁶Li-⁷Li pair was 1.017. The light lithium isotope is concentrated in organic phase.     

Selective separation of alkali metal cations by bulk chloroform membranes containing lipophilic crown ether phosphonic acid monoethyl esters

A series of crown ether phosphonic acid monoethyl esters with crown ether ring size variation from 12-crown-4 to 24-crown-8 is used in bulk chloroform membranes to separate alkali metal cations from mixtures. Selective proton-coupled transport of alkali metal cations from weakly alkaline aqueous phases is achieved. With individual ionizable crown ether carriers, transport selectivity for Li⁺, Na⁺, K⁺, and Rb⁺-Cs⁺ is achieved. A closely related lipophilic phosphonic acid monoethyl ester derivative with a cyclohexyl unit in place of the crown ether exhibits transport selectivity for Li⁺. However, the corresponding phosphonic acid diethyl ester is devoid of transport activity. Effects of structural variation within the carrier upon the selectivity and efficiency of competitive alkali metal cation transport are assessed.     

Density Functional Theory Study of Selectivity of Crown Ethers to Li+ in Spent Lithium-Ion Batteries Leaching Solutions

It is a challenge to recover lithium from the leaching solution of spent lithium-ion batteries, and crown ethers are potential extractants due to their selectivity to alkali metal ions. The theoretical calculations for the selectivity of crown ethers with different structures to Li ions in aqueous solutions were carried out based on the density functional theory. The calculated results of geometries, binding energies, and thermodynamic parameters show that 15C5 has the strongest selectivity to Li ions in the three crown ethers of 12C4, 15C5, and 18C6. B15C5 has a smaller binding energy but more negative free energy than 15C5 when combined with Li⁺, leading to that the lithium ions in aqueous solutions will combine with B15C5 rather than 15C5. The exchange reactions between B15C5 and hydrated Li⁺, Co²⁺, and Ni²⁺ were analyzed and the results show that B15C5 is more likely to capture Li⁺ from the hydrated ions in an aqueous solution containing Li⁺, Co²⁺, and Ni²⁺. This study indicates that it is feasible to extract Li ions selectively using B15C5 as an extractant from the leaching solution of spent lithium-ion batteries.     

Preparation and Application of Cholesteryl‐Benzo‐15‐Crown‐5/Cholesteryl Mixed Liquid Crystals

Various mixed liquid crystals containing crown ether‐cholesteryl liquid crystal, benzo‐15‐crown‐5‐COO‐C₂₇H₄₅ (B15C5‐COOCh), with various common cholesteric liquid crystals, e.g., cholesteryl chloride, cholesteryl benzoate and cholesteryl palmitate, were prepared and studied using polarizing microscopy and differential scanning calorimetry. Investigating the concentration effect of B15C5‐COOCh in mixed liquid crystals revealed that the addition of B15C5‐COOCh resulted in wider phase transition temperature ranges of these cholesteryl liquid crystals. The stability of these B15C5‐COOCh/cholesteryl mixed liquid crystals was studied using comprehensive graphic molecular modeling computer programs (Insight II and Discover) to calculate their molecular energy and stability energy. The effect of salts, e.g. Na⁺, Co³⁺, Y³⁺ and La³⁺, on the transition temperature range of the mixed liquid crystals was also investigated. The crown ether cholesteric liquid crystal B15C5‐COOCh was applied both as a surfactant and an ion transport carrier to transport metal ions through liquid membranes. Cholesteryl benzo‐15‐crown‐5 exhibited distinctive characteristics of a surfactant and the critical micellar concentration (CMC) of the surfactant was investigated by the pyrene fluorescence probe method. Cholesteryl benzo‐15‐crown‐5 was successfully applied as a good ion transport carrier (Ionophore) to transport various metal ions, e.g. Li⁺, Na⁺, La³⁺, Fe³⁺ and Co³⁺, through organic liquid membranes. The transport ability of the cholesteryl benzo‐15‐crown‐5 surfactant for these metal ions was in the order: Co³⁺ ≥ Li⁺ > Fe³⁺ > Na⁺ > La³⁺.     

Cation exchange properties of crown ether-phosphotungstic acid precipitates

Precipitate formation between phosphotungstic acid and crown ethers is a general phenomenon, producing solids with selective ion exchange behavior for the alkali metal ions. Distribution coefficients for Li⁺, Na⁺, K⁺, and Cs⁺ were measured for a series of these precipitates with different crown ethers. The sorption data are more complicated than for the corresponding phosphomolybdates and indicate a variability in the number of exchangeable sites with H⁺ and M⁺ concentration. The crown ether used markedly affects the cation selectivity of the phosphotungstate precipitates.     

Properties and Applications of Cryptand‐22 Surfactant for Ion Transport and Ion Extraction

A non‐ionic cryptand‐22 surfactant consisting of a macrocyclic cryptand‐22 polar head and a long paraffinic chain (C₁₀H₂₁‐Cryptand‐22) was synthesized and characterized. The critical micellar concentration (CMC) of the cryptand surfactant in ROH/H₂O mixed solvent was determined by the pyrene fluorescence probe method. In general, the cmc of the cryptand surfactant increased upon decreasing the polarity of the surfactant solution. The cryptand surfactant also can behave as a pseudo cationic surfactant by protonation of cryptand‐22 or complexation with metal ions. Effects of protonation and metal ions on the cmc of the cryptand surfactant were investigated. A preliminary application of the cryptand surfactant as an ion‐transport carrier for metal ions, e.g., Li⁺, Na⁺, K⁺ and Sr²⁺, through an organic liquid‐membrane was studied. The transport ability of the cryptand surfactant for these metal ions was in the order: K⁺ ≥ Na⁺ < Li⁺ < Sr²⁺. A comparison of the ion‐transport ability of the cryptand surfactant with other macrocyclic polyethers, e.g., dibenzo‐18‐crown‐6, 18‐crown‐6 and benzo‐15‐crown‐5, was studied and discussed. Among these macrocyclic polyethers, the cryptand surfactant was the best ion‐transport carrier for Na⁺, Li⁺ and Sr²⁺ ions. Furthermore, a foam extraction system using the cryptand surfactant to extract the cupric ion was also investigated.     

Flow-injection determination of sodium and potassium by separationon a silica column and extraction-spectrophotometry with benzo-18-crown-6 and tetrabromophenolphthalein ethyl ester

Sodium and potassium ions in waters are determined by flow-injection extraction-spectrophotometry. The ion-association complexes formed between the metal/crown ether cations and the tetrabromophenolphthalein ethyl ester anion (TBPE^-) are extracted into chlorobenzene/benzene (1:3) and the absorbance of the organic phase is measured after phase separation with a porous membrane. Sodium and potassium are separated on-line with a column (1 mm i.d.×30 cm) packed with silica gel (100-200 mesh). The manifold comprises four streams, each at 0.8 ml min^?1. The sample is injected into a water stream and mixed with a reagent stream containing lithium acetate and benzo-18-crown-6 before entering the silica gel column; after the separation, the stream is mixed with EDTA (trilithium salt) and lithium hydroxide, and then with the extraction solution containing TBPE.H. Extraction proceeds in a 2-m coil; the absorbance of the organic phase is measured at 620 nm. CAlibration graphs are linear inthe ranges 0–×10^?3 M sodium and 0–2×10^?4 M potassium. The sample throughput is 15 h^?1. The procedure is applicable to river and tap waters.     

Solvent extraction and self-assembly of nanosized aggregates of p-tert-butyl thiacalix[4]arenes tetrasubstituted at the lower rim by tertiary amide groups and monocharged metal cations in the organic phase

New p-tert-butyl thiacalix[4]arenes functionalized with morpholide and pyrrolidide groups at the lower rim in cone, partial cone, and 1,3-alternate conformations were synthesized, and their receptor properties for monocharged cations (alkali metal and silver ions) were studied using the picrate extraction method and dynamic light scattering (DLS). To evaluate the ability of the p-tert-butyl thiacalix[4]arene derivatives to recognize metal ions, liquid-liquid extraction of their picrate salts has been carried out in a mutually saturated water-dichloromethane system. The degrees of extraction and the extraction constants for monocharged metal cations (Li⁺, Na⁺, K⁺, Cs⁺) have been determined. The ability of the systems, consisting of host and guest molecules, to self-assembly was proved by DLS using a Zetasizer Nano ZS particle size analyzer. It was shown that all the investigated thiacalix[4]arenes are able to form nanoscale particles with silver cations under the experimental conditions. The pyrrolidide derivative in the cone conformation showed both self-association and aggregation processes with lithium cations. The degree of extraction for all the investigated systems that formed nanoscale aggregates in the organic phase was more than 67% and the extraction constants, log K_ex determined by the picrate extraction method, more than 6.     

Stable structures of 12-crown-O3N complexes with Li or Na in aqueous and acetonitrile solutions

Molecular geometries of crown ether derivatives play an important role in capturing and transporting alkali metal ions such as Li⁺ and Na⁺. As the selectivity of ions is observed in solutions, it is necessary to know their molecular structures in solutions. Recently, we investigated stable conformations of 12-crown-O₃N and its Li⁺ complex in aqueous solution by the combination of three programs, the CONFLEX, Gaussian 98, and BOSS programs. In the present study, we applied the same procedure to investigate stable structures of 12-crown-O₃N complexes with an alkali ion in aqueous and acetonitrile solutions. It was confirmed that the stable structures of Li⁺ and Na⁺ complexes in solutions are highly dependent on the polarity of the solvents.     

Selective Separation of Lithium,Magnesium and Calcium using 4-Phosphoryl Pyrazolones as pH-Regulated Receptors

Ensuring continuous and sustainable lithium supply requires the development of highly efficient separation processes such as LLE (liquid-liquid extraction) for both primary sources and certain waste streams. In this work, 4-phosphoryl pyrazolones are used in an efficient pH-controlled stepwise separation of Li⁺ from Ca²⁺, Mg²⁺, Na⁺ and K⁺. The factors affecting LLE process, such as the substitution pattern of the extractant, diluent/water distribution, co-ligand, pH, and speciation of the metal complexes involved, were systematically investigated. The maximum extraction efficiency of Li⁺ at pH 6.0 was 94 % when Mg²⁺ and Ca²⁺ were previously separated at pH<5.0, proving that the separation of these ions is possible by simply modulating the pH of the aqueous phase. Our study points a way to separation of lithium from acid brine or from spent lithium ion battery leaching solutions, which supports the future supply of lithium in a more environmentally friendly and sustainable manner.     

Effect of the species and number of heteroatom on the interaction energy and charge transfer between crown ether and alkali metal ions

Crown ether can bind the alkali metal ions, and the binding is related to numerous factors. In present work, we investigated the effect of the species and number of heteroatom on the interaction energy and charge transfer between crown ether and alkali metal ions in the three complexes (12C4O-Li⁺, 15C5O-Na⁺ and 18C6O-K⁺) using density functional method. Our results show that the N- or S-substitution is more favorable to the enhancement of charge transfer between the alkali metal ions and crown ethers than P-substitution; furthermore, the interaction energy of N- or S-substitution is also higher than that of P-substitution. The 12C4O has strongest affinity for Li⁺ in the three complexes from the perspective of the variation of the species and the number of heteroatom. Thus, take 12C4O for example, it is concluded that the number of N-substitution has slight influence on the interaction energy; however, as the number of P- or S-substitutions increases, the interaction energy values decrease sharply.     

Rotationally Active Ligands: Dialing‐Up the Co‐conformations of a [2]Rotaxane for Metal Ion Binding

A novel [2]rotaxane was constructed that has a bidentate N,N′‐chelate as part of a rigid, H‐shaped axle and a 24‐membered crown ether macrocycle containing six ether O‐atoms and an olefinic group as the wheel. This unique topology produces a ligand with the ability to dial‐up different donor sets for complexation to metal ions by simply rotating the wheel about the axle. The solution and solid‐state structures of the free ligand and complexes with Li⁺ and Cu⁺ show how the ligand adopts different rotational co‐conformations for each. The Li⁺ ion uses the N,N′‐chelate and O‐donors while the Cu⁺ center is coordinated to both O‐donors and the olefinic group. This concept of rotationally active ligands should be possible with a wide variety of donor sets and could find broad application in areas of coordination chemistry, such as catalysis and metal sequestration.     

A DFT Study on the Selective Extraction of Metallic Ions by 12-Crown-4

In order to predict the extraction ability of 12-crown-4 for different metallic ions, the complexes [M(12-crown-4)] and [M(H₂O)₄] (where M=Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, Ca²⁺, Cu²⁺ and Zn²⁺) were investigated by the density functional theory without restrictions for their geometry. The metal binding capability was evaluated using the binding energy, and the effect of nature of the metal on the binding properties was also studied. The results of the calculations showed that the coordination ability of a donor molecule towards different metal ions increased in proportion to their ionization potential. In addition, based on the extraction distribution coefficient, we found that 12-crown-4 can selectively extract Cu²⁺ and Be²⁺ ions from aqueous solutions of mixed cations. Obviously, the stability of complexes and the extraction power of extractants depend greatly on the nature of the metal ions. Calculation results from our study could be used to predict the extraction power of this crown ether and could play a guiding role in planning experiments.     

A New Extraction System Based on Isopropyl Salicylate and Trioctylphosphine Oxide for Separating Alkali Metals

It was established that isopropyl salicylate can be used similarly to 1,3-diketones as a key component for a new efficient extraction system for selective separation of alkali metal cations. According to DFT modeling of complexes of isopropyl salicylate and 1,3-diketone with alkali metal cations (Li⁺, Na⁺, K⁺), six-membered metallacycles are formed whose stability decreases along the series Li > Na > K, which results in the observed enhanced affinity to lithium. The extraction ability of isopropyl salicylate is manifested in the presence of trioctylphosphine oxide (TOPO). The newly obtained complexes of isopropyl salicylate with alkali metal cations as well as their extracts in a mixture with TOPO are characterized by means of FT-IR, Raman, and NMR spectroscopy. The probable structure of the extracted lithium complex is presumed and the role of TOPO in the extraction process is investigated in detail. Extraction experiments showed extremely high separation coefficients for Li/Na and Li/K pairs in the extraction from a model multi-component solution.