Synthesis,electrochemistry and in situ spectroelectrochemistry of a new Co(III) thio Schiff-base complex with N,N′-bis(2-aminothiophenol)-1,4-bis(carboxylidene phenoxy)butane

A new cobalt Schiff-base complex, [Co(L)(OH)(H₂O)] (where L = [N,N′-bis(2-aminothiophenol)-1,4-bis(carboxylidene phenoxy)butane), was synthesized and its electrochemical and spectroelectochemical properties were investigated using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and thin-layer spectro-electrochemistry in solutions of dimethyl sulfoxide (DMSO) and dichloromethane (CH₂Cl₂). The [Co(L)(OH)(H₂O)] complex displays two well-defined reversible reduction processes with the corresponding anodic waves. The half-wave potentials of the first and second reduction processes were displayed at E_1/2 = 0.08 V and E_1/2 = −1.21 V (scan rate: 0.100 Vs⁻¹) in DMSO, and E_1/2 = −0.124 V and E_1/2 = −1.32 V (scan rate: 0.100 Vs⁻¹) in CH₂Cl₂. The potentials of the reduction processes in DMSO are shifted toward negative potentials (0.220–0.112 V) compared to those in CH₂Cl₂. The electrochemical results are assigned to two one-electron reduction processes; [Co(III)L] + ⁻e → [Co(II)L]⁻ and [Co(II)L]⁻ + ⁻e → [Co(I)L]²⁻. The six-coordination of the complex remains unchanged during the reduction processes and the electron transfer processes were not followed by a chemical reaction upon scan reversal. It was also seen that [Co(L)(OH)(H₂O)] was reduced at a more positive potential than the corresponding salen analogs. The shift and reversibility are apparently related to the high degree of electron delocalization of the [Co(L)(OH)(H₂O)] complex, having a N₂O₂S₂ donor set and two additional benzene units. Additionally, in situ spectroelectrochemical measurements support Co(III)/Co(II) and Co(II)/Co(I) reversible reduction processes with the observation of the corresponding spectral changes with the applied potentials E_app = −0.40 and −1.60 V. Application of the spectroelectrochemical results allowed the determination ofE_1/2 and n (the number of electrons) from the spectra of the fully oxidized and reduced species in one unified experiment as well. The results obtained by this method are in agreement with those by the CV and DPV methods.     

A Sn-stabilized Cuδ+ electrocatalyst toward highly selective CO2-to-CO in a wide potential range

Current techno-economic evaluation manifests that the electrochemical CO₂ reduction reaction (eCO₂RR) to CO is very promising considering its simple two-electron transfer process, minimum cost of electricity, and low separation cost. Herein, we report a Sn-modification strategy that can tune the local electronic structure of Cu with an appropriate valence. The as-prepared catalysts can alter the broad product distribution of Cu-based eCO₂RR to predominantly generate CO. CO faradaic efficiency (FE) remained above 96% in the wide potential range of −0.5 to −0.9 V vs. the reversible hydrogen electrode (RHE) with CO partial current density up to 265 mA cm⁻². The catalyst also had remarkable stability. Operando experiments and density functional theory calculations demonstrated that the surface Cu^δ+ sites could be modulated and stabilized after introducing Sn. The Cu^δ+ sites with low positive valence were conducive to regulating the binding energy of intermediates and resulted in high CO selectivity and maintained the stability of the catalyst. Additionally, scaling up the catalyst into a membrane electrode assemble system (MEA) could achieve a high overall current of 1.3 A with exclusive and stable CO generation.

Sn-stabilized Cu^δ+ electrocatalysts have been prepared, achieving highly selective CO₂-to-CO in a wide potential range. The modifier Sn could tune the electronic structure of Cu, resulting in high reactivity and selectivity for CO production.     

The in situ study of surface species and structures of oxide-derived copper catalysts for electrochemical CO2 reduction

Oxide-derived copper (OD-Cu) has been discovered to be an effective catalyst for the electroreduction of CO₂ to C2+ products. The structure of OD-Cu and its surface species during the reaction process are interesting topics, which have not yet been clearly discussed. Herein, in situ surface-enhanced Raman spectroscopy (SERS), operando X-ray absorption spectroscopy (XAS), and ¹⁸O isotope labeling experiments were employed to investigate the surface species and structures of OD-Cu catalysts during CO₂ electroreduction. It was found that the OD-Cu catalysts were reduced to metallic Cu(0) in the reaction. CuO_x species existed on the catalyst surfaces during the CO₂RR, which resulted from the adsorption of preliminary intermediates (such as *CO₂ and *OCO⁻) on Cu instead of on the active sites of the catalyst. It was also found that abundant interfaces can be produced on OD-Cu, which can provide heterogeneous CO adsorption sites (strong binding sites and weak binding sites), leading to outstanding performance for obtaining C2+ products. The Faradaic efficiency (FE) for C2+ products reached as high as 83.8% with a current density of 341.5 mA cm⁻² at −0.9 V vs. RHE.

CuO_x species were shown to exist on OD-Cu during the CO₂RR, which resulted from the adsorption of preliminary intermediates (such as *CO₂ and *OCO⁻) on Cu instead of on the active sites of the catalyst.     

Cu2O-Ag Tandem Catalysts for Selective Electrochemical Reduction of CO2 to C2 Products

The electrochemical carbon dioxide reduction reaction (CO₂RR) to C₂ chemicals has received great attention. Here, we report the cuprous oxide (Cu₂O) nanocubes cooperated with silver (Ag) nanoparticles via the replacement reaction for a synergetic CO₂RR. The Cu₂O-Ag tandem catalyst exhibits an impressive Faradaic efficiency (FE) of 72.85% for C₂ products with a partial current density of 243.32 mA·cm⁻². The electrochemical experiments and density functional theory (DFT) calculations reveal that the introduction of Ag improves the intermediate CO concentration on the catalyst surface and meanwhile reduces the C-C coupling reaction barrier energy, which is favorable for the synthesis of C₂ products.     

A reconstructed porous copper surface promotes selectivity and efficiency toward C2 products by electrocatalytic CO2 reduction

Electrocatalytic synthesis of multicarbon (C₂₊) products from CO₂ reduction suffers from poor selectivity and low energy efficiency. Herein, a facile oxidation–reduction cycling method is adopted to reconstruct the Cu electrode surface with the help of halide anions. The surface composed of entangled Cu nanowires with hierarchical pores is synthesized in the presence of I⁻, exhibiting a C₂ faradaic efficiency (FE) of 80% at −1.09 V vs. RHE. A partial current density of 21 mA cm⁻² is achieved with a C₂ half-cell power conversion efficiency (PCE) of 39% on this electrode. Such high selective C₂ production is found to mainly originate from CO intermediate enrichment inside hierarchical pores rather than the surface lattice effect of the Cu electrode.

The Cu electrode surface is reconstructed by a halide anion assisted method for promoting CO₂ reduction.     

Molecular Modification of Single Cobalt Sites Boosts the Catalytic Activity of CO2 Electroreduction into CO

Electroreduction of CO₂ into carbonaceous fuels or industrial chemicals using renewable energy sources is an ideal way to promote global carbon recycling. Thus, it is of great importance to develop highly selective, efficient, and stable catalysts. Herein, we prepared cobalt single atoms (Co SAs) coordinated with phthalocyanine (Co SAs-Pc). The anchoring of phthalocyanine with Co sites enabled electron transfer from Co sites to CO₂ effectively via the π-conjugated system, resulting in high catalytic performance of CO₂ electroreduction into CO. During the process of CO₂ electroreduction, the Faradaic efficiency (FE) of Co SAs-Pc for CO was as high as 94.8 %. Meanwhile, the partial current density of Co SAs-Pc for CO was −11.3 mA cm⁻² at −0.8 V versus the reversible hydrogen electrode (vs RHE), 18.83 and 2.86 times greater than those of Co SAs (−0.60 mA cm⁻²) and commercial Co phthalocyanine (−3.95 mA cm⁻²), respectively. In an H-cell system operating at −0.8 V vs RHE over 10 h, the current density and FE for CO of Co SAs-Pc dropped by 3.2 % and 2.5 %. A mechanistic study revealed that the promoted catalytic performance of Co SAs-Pc could be attributed to the accelerated reaction kinetics and facilitated CO₂ activation.     

Nitrogen-Doped Porous Carbon Materials Derived from Graphene Oxide/Melamine Resin Composites for CO2 Adsorption

CO₂ adsorption in porous carbon materials has attracted great interests for alleviating emission of post-combustion CO₂. In this work, a novel nitrogen-doped porous carbon material was fabricated by carbonizing the precursor of melamine-resorcinol-formaldehyde resin/graphene oxide (MR/GO) composites with KOH as the activation agent. Detailed characterization results revealed that the fabricated MR(0.25)/GO-500 porous carbon (0.25 represented the amount of GO added in wt.% and 500 denoted activation temperature in °C) had well-defined pore size distribution, high specific surface area (1264 m²·g⁻¹) and high nitrogen content (6.92 wt.%), which was mainly composed of the pyridinic-N and pyrrolic-N species. Batch adsorption experiments demonstrated that the fabricated MR(0.25)/GO-500 porous carbon delivered excellent CO₂ adsorption ability of 5.21 mmol·g⁻¹ at 298.15 K and 500 kPa, and such porous carbon also exhibited fast adsorption kinetics, high selectivity of CO₂/N₂ and good recyclability. With the inherent microstructure features of high surface area and abundant N adsorption sites species, the MR/GO-derived porous carbon materials offer a potentially promising adsorbent for practical CO₂ capture.     

Two-Dimensional Metal–Organic Framework Nanosheets with Cobalt-Porphyrins for High-Performance CO2 Electroreduction

The electrochemical reduction of CO₂ presents a promising strategy to mitigate the greenhouse effect and reduce excess carbon dioxide emission to realize a carbon-neutral energy cycle, but it suffers from the lack of high-performance electrocatalysts. In this work, catalytic active cobalt porphyrin [TCPP(Co)=(5,10,15,20)-tetrakis(4-carboxyphenyl)porphyrin-Co^II] was precisely anchored onto water-stable 2D metal–organic framework (MOF) nanosheets (Zr-BTB) to obtain ultrathin 2D MOF nanosheets [TCPP(Co)/Zr-BTB] with accessible catalytic sites for the CO₂ reduction reaction. Compared with molecular cobalt porphyrin, the TCPP(Co)/Zr-BTB exhibits an ultrahigh turnover frequency (TOF=4768 h⁻¹ at −0.919 V vs. reversible hydrogen electrode, RHE) owing to high active-site utilization. In addition, three post-modified 2D MOF nanosheets [TCPP(Co)/Zr-BTB-PABA, TCPP(Co)/Zr-BTB-PSBA, TCPP(Co)/Zr-BTB-PSABA] were obtained, with the modifiers of p-(aminomethyl)benzoic acid (PABA), p-sulfobenzoic acid potassium (PSBA), and p-sulfamidobenzoic acid (PSABA), to change the micro-environments around TCPP(Co) through the tuning of steric effects. Among them, the TCPP(Co)/Zr-BTB-PSABA exhibited the best performance with a faradaic efficiency (FE_CO) of 85.1 %, TOF of 5315 h⁻¹, and j_total of 6 mA cm⁻² at −0.769 V (vs. RHE). In addition, the long-term durability of the electrocatalysts is evaluated and the role of pH buffer is revealed.     

Study on the Structure of a Mixed KCl and K2SO4 Aqueous Solution Using a Modified X-ray Scattering Device,Raman Spectroscopy,and Molecular Dynamics Simulation

The microstructure of a mixed KCl and K₂SO₄ aqueous solution was studied using X-ray scattering (XRS), Raman spectroscopy, and molecular dynamics simulation (MD). Reduced structure functions [F(Q)], reduced pair distribution functions [G(r)], Raman spectrum, and pair distribution functions (PDF) were obtained. The XRS results show that the main peak (r = 2.81 Å) of G(r) shifted to the right of the axis (r = 3.15 Å) with increased KCl and decreased K₂SO₄. The main peak was at r = 3.15 Å when the KCl concentration was 26.00% and the K₂SO₄ concentration was 0.00%. It is speculated that this phenomenon was caused by the main interaction changing, from K-O_W (r = 2.80 Å) and O_W-O_W (r = 2.80 Å), to Cl⁻-O_W (r = 3.14 Å) and K⁺-Cl⁻ (r = 3.15 Å). According to the trend of the hydrogen bond structure in the Raman spectrum, when the concentration of KCl was high and K₂SO₄ was low, the destruction of the tetrahedral hydrogen bond network in the solution was more serious. This shows that the destruction strength of the anion to the hydrogen bond network structure in solution was Cl⁻ > SO₄²⁻. In the MD simulations, the coordination number of O_W-O_W decreased with increasing KCl concentration, indicating that the tetrahedral hydrogen bond network was severely disrupted, which confirmed the results of the Raman spectroscopy. The hydration radius and coordination number of SO₄²⁻ in the mixed solution were larger than Cl⁻, thus revealing the reason why the solubility of KCl in water was greater than that of K₂SO₄ at room temperature.     

Electrochemical Properties of a Rhodium(III) Mono-Terpyridyl Complex and Use as a Catalyst for Light-Driven Hydrogen Evolution in Water

Molecular hydrogen (H₂) is considered one of the most promising fuels to decarbonize the industrial and transportation sectors, and its photocatalytic production from molecular catalysts is a research field that is still abounding. The search for new molecular catalysts for H₂ production with simple and easily synthesized ligands is still ongoing, and the terpyridine ligand with its particular electronic and coordination properties, is a good candidate to design new catalysts meeting these requirements. Herein, we have isolated the new mono-terpyridyl rhodium complex, [Rh^III(tpy)(CH₃CN)Cl₂](CF₃SO₃) (Rh-tpy), and shown that it can act as a catalyst for the light-induced proton reduction into H₂ in water in the presence of the [Ru(bpy)₃]Cl₂ (Ru) photosensitizer and ascorbate as sacrificial electron donor. Under photocatalytic conditions, in acetate buffer at pH 4.5 with 0.1 M of ascorbate and 530 μM of Ru, the Rh-tpy catalyst produces H₂ with turnover number versus catalyst (TON_Cat*) of 300 at a Rh concentration of 10 μM, and up to 1000 at a concentration of 1 μM. The photocatalytic performance of Ru/Rh-tpy/HA^–/H₂A has been also compared with that obtained with the bis-dimethyl-bipyridyl complex [Rh^III(dmbpy)₂Cl₂]⁺ (Rh2) as a catalyst in the same experimental conditions. The investigation of the electrochemical properties of Rh-tpy in DMF solvent reveals that the two-electrons reduced state of the complex, the square-planar [Rh^I(tpy)Cl] (Rh^I-tpy), is quantitatively electrogenerated by bulk electrolysis. This complex is stable for hours under an inert atmosphere owing to the π-acceptor property of the terpyridine ligand that stabilizes the low oxidation states of the rhodium, making this catalyst less prone to degrade during photocatalysis. The π-acceptor property of terpyridine also confers to the Rh-tpy catalyst a moderately negative reduction potential (Ep_c(Rh^III/Rh^I) = −0.83 V vs. SCE in DMF), making possible its reduction by the reduced state of Ru, [Ru^II(bpy)(bpy^•−)]⁺ (Ru⁻) (E_1/2(Ru^II/Ru⁻) = −1.50 V vs. SCE) generated by a reductive quenching of the Ru excited state (*Ru) by ascorbate during photocatalysis. A Stern–Volmer plot and transient absorption spectroscopy confirmed that the first step of the photocatalytic process is the reductive quenching of *Ru by ascorbate. The resulting reduced Ru species (Ru⁻) were then able to activate the Rh^III-tpy H₂-evolving catalyst by reduction generating Rh^I-tpy, which can react with a proton on a sub-nanosecond time scale to form a Rh^III(H)-tpy hydride, the key intermediate for H₂ evolution.     

[MII(H2dapsc)]-[Cr(CN)6] (M = Mn,Co) Chain and Trimer Complexes: Synthesis,Crystal Structure,Non-Covalent Interactions and Magnetic Properties

Four new heterometallic complexes combining [M^II(H₂dapsc)]²⁺ cations with the chelating H₂dapsc {2,6-diacetylpyridine-bis(semicarbazone)} Schiff base ligand and [Cr(CN)₆]³⁻ anion were synthesized: {[M^II(H₂dapsc)]Cr^III(CN)₆K(H₂O)_2.5(EtOH)_0.5}_n·1.2n(H₂O), M = Mn (1) and Co (2), {[Mn(H₂dapsc)]₂Cr(CN)₆(H₂O)₂}Cl·H₂O (3) and {[Co(H₂dapsc)]₂Cr(CN)₆(H₂O)₂}Cl·2EtOH·3H₂O (4). In all the compounds, M(II) centers are seven-coordinated by N₃O₂ atoms of H₂dapsc in the equatorial plane and N or O atoms of two apical –CN/water ligands. Crystals 1 and 2 are isostructural and contain infinite negatively charged chains of alternating [M^II(H₂dapsc)]²⁺ and [Cr^III(CN)₆]³⁻ units linked by CN-bridges. Compounds 3 and 4 consist of centrosymmetric positively charged trimers in which two [M^II(H₂dapsc)]²⁺ cations are bound through one [Cr^III(CN)₆]³⁻ anion. All structures are regulated by π-stacking of coplanar H₂dapsc moieties as well as by an extensive net of hydrogen bonding. Adjacent chains in 1 and 2 interact also by coordination bonds via a pair of K⁺ ions. The compounds containing Mn^II (1, 3) and Co^II (2, 4) show a significant difference in magnetic properties. The ac magnetic measurements revealed that complexes 1 and 3 behave as a spin glass and a field-induced single-molecule magnet, respectively, while 2 and 4 do not exhibit slow magnetic relaxation in zero and non-zero dc fields. The relationship between magnetic properties and non-covalent interactions in the structures 1–4 was traced.     

A Two-Stage Culture Strategy for Scenedesmus sp. FSP3 for CO2 Fixation and the Simultaneous Production of Lutein under Light and Salt Stress

In this study, Scenedesmus sp. FSP3 was cultured using a two-stage culture strategy for CO₂ fixation and lutein production. During the first stage, propylene carbonate was added to the medium, with 5% CO₂ introduced to promote the rapid growth and CO₂ fixation of the microalgae. During the second stage of cultivation, a NaCl concentration of 156 mmol L⁻¹ and a light intensity of 160 μmol m⁻² s⁻¹ were used to stimulate the accumulation of lutein in the microalgal cells. By using this culture method, high lutein production and CO₂ fixation were simultaneously achieved. The biomass productivity and carbon fixation rate of Scenedesmus sp. FSP3 reached 0.58 g L⁻¹ d⁻¹ and 1.09 g L⁻¹ d⁻¹, with a lutein content and yield as high as 6.45 mg g⁻¹ and 2.30 mg L⁻¹ d⁻¹, respectively. The results reveal a commercially feasible way to integrate microalgal lutein production with CO₂ fixation processes.     

The Selective CO2 Adsorption and Photothermal Conversion Study of an Azo-Based Cobalt-MOF Material

A new metal–organic framework (MOF), [Co₂(L)₂(azpy)]_n (compound 1, H₂L = 5-(pyridin-4-ylmethoxy)-isophthalic acid, azpy = 4,4′-azopyridine), was synthesized by a solvothermal method and further characterized by elemental analysis, IR spectra, thermogravimetric analysis, single-crystal and powder X-ray diffraction. The X-ray single-crystal diffraction analysis for compound 1 indicated that two cis L2²⁻ ligands connected to two cobalt atoms resulted in a macrocycle structure. Through a series of adsorption tests, we found that compound 1 exhibited a high capacity of CO₂, and the adsorption capacity could reach 30.04 cm³/g. More interestingly, under 273 K conditions, the adsorption of CO₂ was 41.33 cm³/g. In addition, when the Co-MOF was irradiated by a 730 nm laser, rapid temperature increases for compound 1 were observed (temperature variation in 169 s: 26.6 °C), showing an obvious photothermal conversion performance. The photothermal conversion efficiency reached 20.3%, which might be due to the fact that the parallel arrangement of azo units inhibited non-radiative transition and promoted photothermal conversion. The study provides an efficient strategy for designing MOFs for the adsorption of CO₂ and with good photothermal conversion performance.     

A Novel Ibuprofen Derivative and Its Complexes: Physicochemical Characterization,DFT Modeling,Docking, In Vitro Anti-Inflammatory Studies,and DNA Interaction

A novel derivative of ibuprofen and salicylaldehyde N′-(4-hydroxybenzylidene)-2-(4-isobutylphenyl) propane hydrazide (HL) was synthesized, followed by its complexation with Cu, Ni, Co, Gd, and Sm. The compounds obtained were characterized by ¹HNMR, mass spectrometry, UV-Vis spectroscopy, FT-IR spectroscopy, thermal analysis (DTA and TGA), conductivity measurements, and magnetic susceptibility measurements. The results indicate that the complexes formed were [Cu(L)(H₂O)]Cl·2H₂O, [Ni(L)₂], [Co(L)₂]·H₂O, [Gd(L)₂(H₂O)₂](NO₃)·2H₂O and [Sm(L)₂(H₂O)₂](NO₃)·2H₂O. The surface characteristics of the produced compounds were evaluated by DFT calculations using the MOE environment. The docking was performed against the COX2 targeting protein (PDB code: 5IKT Homo sapiens). The binding energies were −7.52, −9.41, −9.51, −8.09, −10.04, and −8.05 kcal/mol for HL and the Co, Ni, Cu, Sm, and Gd complexes, respectively, which suggests the enhancement of anti-inflammatory behaviors compared with the binding energy of ibuprofen (−5.38 kcal/mol). The anti-inflammatory properties of the new compounds were assessed in vitro using the western blot analysis method and the enzyme-linked immunosorbent assay (ELISA), consistent with the outcomes obtained from docking. The half-maximal inhibitory concentration (IC₅₀) values are 4.9, 1.7, 3.7, 5.6, 2.9, and 2.3 µM for HL and the Co, Ni, Cu, Sm, and Gd complexes, respectively, showing that they are more effective inhibitors of COX2 than ibuprofen (IC₅₀ = 31.4 µM). The brain or intestinal estimated permeation method (BOILED-Egg) showed that HL and its Co complex have high gastrointestinal absorption, while only the free ligand has high brain penetration. The binding constants of Co, Cu, and Gd complexes with DNA were recorded as 2.20 × 10⁴, 2.27 × 10^6, and 4.46 × 10³ M⁻¹, respectively, indicating the intercalator behavior of interaction. The newly synthesized ibuprofen derivative and its metal complexes showed greater anti-inflammatory activity than ibuprofen.     

SrO-layer insertion in Ruddlesden–Popper Sn-based perovskite enables efficient CO2 electroreduction towards formate

Tin (Sn)-based oxides have been proved to be promising catalysts for the electrochemical CO₂ reduction reaction (CO₂RR) to formate (HCOO⁻). However, their performance is limited by their reductive transformation into metallic derivatives during the cathodic reaction. This paper describes the catalytic chemistry of a Sr₂SnO₄ electrocatalyst with a Ruddlesden–Popper (RP) perovskite structure for the CO₂RR. The Sr₂SnO₄ electrocatalyst exhibits a faradaic efficiency of 83.7% for HCOO⁻ at −1.08 V vs. the reversible hydrogen electrode with stability for over 24 h. The insertion of the SrO-layer in the RP structure of Sr₂SnO₄ leads to a change in the filling status of the anti-bonding orbitals of the Sn active sites, which optimizes the binding energy of *OCHO and results in high selectivity for HCOO⁻. At the same time, the interlayer interaction between interfacial octahedral layers and the SrO-layers makes the crystalline structure stable during the CO₂RR. This study would provide fundamental guidelines for the exploration of perovskite-based electrocatalysts to achieve consistently high selectivity in the CO₂RR.

This paper describes how the insertion of a SrO-layer in Ruddlesden–Popper Sr₂SnO₄ perovskite electrocatalysts promotes CO₂ reduction towards formate via *OCHO intermediate. A faradaic efficiency of 83.7% and stability for over 24 h were obtained.     

Construction of Two Stable Co(II)-Based Hydrogen-Bonded Organic Frameworks as a Luminescent Probe for Recognition of Fe3+ and Cr2O72− in H2O

A pair of cobalt(II)-based hydrogen-bonded organic frameworks (HOFs), [Co(pca)₂(bmimb)]_n (1) and [Co₂(pca)₄(bimb)₂] (2), where Hpca = p-chlorobenzoic acid, bmimb = 1,3-bis((2-methylimidazol-1-yl)methyl)benzene, and bimb = 1,4-bis(imidazol-1-ylmethyl)benzene were hydrothermally synthesized and characterized through infrared spectroscopy (IR), elemental and thermal analysis (EA), power X-ray diffraction (PXRD), and single-crystal X-ray diffraction (SCXRD) analyses. X-ray diffraction structural analysis revealed that 1 has a one-dimensional (1D) infinite chain network through the deprotonated pca⁻ monodentate chelation and with a μ₂-bmimb bridge Co(II) atom, and 2 is a binuclear Co(II) complex construction with a pair of symmetry-related pca⁻ and bimb ligands. For both 1 and 2, each cobalt atom has four coordinated twisted tetrahedral configurations with a N₂O₂ donor set. Then, 1 and 2 are further extended into three-dimensional (3D) or two-dimensional (2D) hydrogen-bonded organic frameworks through C–H···Cl interactions. Topologically, HOFs 1 and 2 can be simplified as a 4-connected qtz topology with a Schläfli symbol {6⁴·8²} and a 4-connected sql topology with a Schläfli symbol {4⁴·6²}, respectively. The fluorescent sensing application of 1 was investigated; 1 exhibits high sensitivity recognition for Fe³⁺ (K_sv: 10970 M⁻¹ and detection limit: 19 μM) and Cr₂O₇²⁻ (K_sv: 12960 M⁻¹ and detection limit: 20 μM). This work provides a feasible detection platform of HOFs for highly sensitive discrimination of Fe³⁺ and Cr₂O₇²⁻ in aqueous media.     

A New Oxygen Containing Pyclen-Type Ligand as a Manganese(II) Binder for MRI and 52Mn PET Applications: Equilibrium,Kinetic, Relaxometric,Structural and Radiochemical Studies

A new pyclen-3,9-diacetate derivative ligand (H₂3,9-OPC2A) was synthesized possessing an etheric O-atom opposite to the pyridine ring, to improve the dissociation kinetics of its Mn(II) complex (pyclen = 3,6,9,15-tetraazabicyclo(9.3.1)pentadeca-1(15),11,13-triene). The new ligand is less basic than the N-containing analogue (H₂3,9-PC2A) due to the non-protonable O-atom. In spite of its lower basicity, the conditional stability of the [Mn(3,9-OPC2A)] (pMn = −log(Mn(II)), c_L = c_Mn(II) = 0.01 mM. pH = 7.4) remains unaffected (pMn = 8.69), compared to the [Mn(3,9-PC2A)] (pMn = 8.64). The [Mn(3,9-OPC2A)] possesses one water molecule, having a lower exchange rate with bulk solvents (k_ex²⁹⁸ = 5.3 ± 0.4 × 10⁷ s⁻¹) than [Mn(3,9-PC2A)] (k_ex²⁹⁸ = 1.26 × 10⁸ s⁻¹). These mild differences are rationalized by density-functional theory (DFT) calculations. The acid assisted dissociation of [Mn(3,9-OPC2A)] is considerably slower (k₁ = 2.81 ± 0.07 M⁻¹ s⁻¹) than that of the complexes of diacetates or bisamides of various 12-membered macrocycles and the parent H₂3,9-PC2A. The [Mn(3,9-OPC2A)] is inert in rat/human serum as confirmed by ⁵²Mn labeling (nM range), as well as by relaxometry (mM range). However, a 600-fold excess of EDTA (pH = 7.4) or a mixture of essential metal ions, propagated some transchelation/transmetalation in 7 days. The H₂3,9-OPC2A is labeled efficiently with ⁵²Mn at elevated temperatures, yet at 37 °C the parent H₂3,9-PC2A performs slightly better. Ultimately, the H₂3,9-OPC2A shows advantageous features for further ligand designs for bifunctional chelators.     

SnO2 Quantum Dots Distributed along V2O5 Nanobelts for Utilization as a High-Capacity Storage Hybrid Material in Li-Ion Batteries

In this study, the facile synthesis of SnO₂ quantum dot (QD)-garnished V₂O₅ nanobelts exhibiting significantly enhanced reversible capacity and outstanding cyclic stability for Li⁺ storage was achieved. Electrochemical impedance analysis revealed strong charge transfer kinetics related to that of V₂O₅ nanobelts. The SnO₂ QD-garnished V₂O₅ nanobelts exhibited the highest discharge capacity of ca. 760 mAhg⁻¹ at a density of 441 mAg⁻¹ between the voltage ranges of 0.0 to 3.0 V, while the pristine V₂O₅ nanobelts samples recorded a discharge capacity of ca. 403 mAhg⁻¹. The high capacity of QD-garnished nanobelts was achieved as an outcome of their huge surface area of 50.49 m²g⁻¹ and improved electronic conductivity. Therefore, the as-presented SnO₂ QD-garnished V₂O₅ nanobelts synthesis strategy could produce an ideal material for application in high-performance Li-ion batteries.     

Electronic structure analysis of electrochemical CO2 reduction by iron-porphyrins reveals basic requirements for design of catalysts bearing non-innocent ligands

Electrocatalytic CO₂ reduction is a possible solution to the increasing CO₂ concentration in the earth’s atmosphere, because it enables storage of energy while using the harmful CO₂ feedstock as a starting material. Notably, iron(ii) tetraphenylporphyrin, [Fe^II(TPP)]⁰ (TPP²⁻ = tetraphenylporphyrin tetra-anion diradical), and its derivatives have been established as one of the most promising families of homogeneous catalysts for CO₂ reduction into CO. Our earlier work has demonstrated that [Fe(TPP)]²⁻, a catalytically active species, is best described as an Fe(ii) center antiferromagnetically coupled with a TPP⁴⁻ diradical. In fact, [Fe(TPP)]²⁻ represents a prototypical example of a diverse array of highly efficient molecular catalysts that feature non-innocent ligands. To obtain valuable insights for future catalyst design, their outstanding catalytic performance warrants an investigation aimed at elucidating the role played by the ligand non-innocence in the reaction. To this end, the reactivity of [Fe(TPP)]²⁻ was first investigated in detail by using density functional theory calculations, and the theoretical results were then validated by reproducing available experimental kinetic and thermodynamic data. Further in-depth analyses pinpointed the electronic-structure feature of the non-innocent TPP ligand that is responsible for the high efficiency of the reaction. Finally, we analyzed the electronic-structure evolution found for the reactions catalyzed by ten related representative non-innocent systems. Our results revealed that for the reactions under consideration, the reducing equivalents are stored on the non-innocent ligand, while CO₂ functionalization takes place at the metal center. Therefore, all of the transformations invariably entail two synchronized electron-transfer events: (1) a metal-to-CO₂ transfer and (2) a ligand-to-metal electron transfer. The former is affected by σ-donation from the metal d_z² orbital to the CO₂ orbital, and the latter is facilitated by orbital coupling between the ligand and the metal center. Our results suggested that ligand non-innocence plays a fundamental role in stabilizing highly active intermediates while realizing high product selectivity for CO₂ reduction and that the metal–ligand cooperativity is essential to the high reaction kinetics. On the basis of these findings, we proposed fundamental requirements for design of catalysts with non-innocent ligands.

This computational study elucidates the role played by ligand non-innocence in CO₂ reduction on the basis of analyses of electronic structure evolution of highly efficient iron-tetraphenylporphyrin and ten other transition metal complexes, all bearing non-innocent ligands.     

Replacement of the Common Chromium Source CrCl3(thf)3 with Well-Defined [CrCl2(μ-Cl)(thf)2]2

CrCl₃(thf)₃ is a common starting material in the synthesis of organometallic and coordination compounds of Cr. Deposited as an irregular solid with no possibility of recrystallization, it is not a purity guaranteed chemical, causing problems in some cases. In this work, we disclose a well-defined form of the THF adduct of CrCl₃ ([CrCl₂(μ-Cl)(thf)₂]₂), a crystalline solid, that enables structure determination by X-ray crystallography. The EA data and XRD pattern of the bulk agreed with the revealed structure. Moreover, its preparation procedure is facile: evacuation of CrCl₃·6H₂O at 100 °C, treatment with 6 equivalents of Me₃SiCl in a minimal amount of THF, and crystallization from CH₂Cl₂. The ethylene tetramerization catalyst [iPrN{P(C₆H₄-p-Si(nBu)₃)₂}₂CrCl₂]⁺[B(C₆F₅)₄]⁻ prepared using well-defined [CrCl₂(μ-Cl)(thf)₂]₂ as a starting material exhibited a reliably high activity (6600 kg/g-Cr/h; 1-octene selectivity at 40 °C, 75%), while that of the one prepared using the impure CrCl₃(thf)₃ was inconsistent and relatively low (~3000 kg/g-Cr/h). By using well-defined [CrCl₂(μ-Cl)(thf)₂]₂ as a Cr source, single crystals of [(CH₃CN)₄CrCl₂]⁺[B(C₆F₅)₄]⁻ and [{Et(Cl)Al(N(iPr)₂)₂}Cr(μ-Cl)]₂ were obtained, allowing structure determination by X-ray crystallography, which had been unsuccessful when the previously known CrCl₃(thf)₃ was used as the Cr source.