Spin-Crossover Iron(II) Compounds with Pendent Tetraphenylethylene Group

Two iron(II) compounds with the general formula of [Fe(phen-TPE)₂(NCX)₂] ⋅ Y (phen-TPE=3-(tetraphenylethylene)-1,10-phenanthroline; X=S and Y=2DMF for 1 ⋅ 2DMF ; X=Se and Y=DMF for 2 ⋅ DMF ) were synthesized and characterized by single-crystal X-ray crystallography and magnetic measurements. Both compounds exhibited thermal-induced complete one-step spin-crossover (SCO) behavior with the critical transition temperatures of 210 K and 260 K for 1 ⋅ 2DMF and 2 ⋅ DMF , respectively. The SCO behavior of these two isomorphic compounds depended significantly on robust intermolecular π⋅⋅⋅π interactions, NCX⁻ groups and solvent molecules.     

Electrochemistry and Spin-Crossover Behavior of Fluorinated Terpyridine-Based Co(II) and Fe(II) Complexes

Due to their ability to form stable molecular complexes that have tailor-made properties, terpyridine ligands are of great interest in chemistry and material science. In this regard, we prepared two terpyridine ligands with two different fluorinated phenyl rings on the backbone. The corresponding Co^II and Fe^II complexes were synthesized and characterized by single-crystal X-ray structural analysis, electrochemistry and temperature-dependent SQUID magnetometry. Single crystal X-ray diffraction analyses at 100 K of these complexes revealed Co−N and Fe−N bond lengths that are typical of low spin Co^II and Fe^II centers. The metal centers are coordinated in an octahedral fashion and the fluorinated phenyl rings on the backbone are twisted out of the plane of the terpyridine unit. The complexes were investigated with cyclic voltammetry and UV/Vis-NIR spectroelectrochemistry. All complexes show a reversible oxidation and several reduction processes. Temperature dependent SQUID magnetometry revealed a gradual thermal SCO behavior in two of the complexes, while EPR spectroscopy provided further insights on the electronic structure of the metal complexes, as well as site of reduction.     

Photo-Induced Switchable Binding Behavior of Bridged Bis(β-cyclodextrin) with an Azobenzene Dicarboxylate Linker

A bridged bis(β-cyclodextrin) (1) with an azobenzene dicarboxylate linker was synthesized, and its binding behavior with a fluorescent dye, acridine red (AR), was investigated by means of fluorescence spectroscopy. Due to the photo-induced conversion of the azobenzene dicarboxylate linker from the trans-conformer to the cis-conformer, 1 exhibits a different binding behavior before and after UV light irradiation, giving a stronger binding ability towards AR in the cis form. This switchable binding behavior of 1 may open a new channel to the design of azobenzene-linked dimeric receptors as photo-induced molecular devices.     

Catalytic and Stoichiometric Baeyer–Villiger Oxidation Mediated by Nonheme Peroxo-Diiron(III), Acylperoxo,and Iodosylbenzene Iron(III) Intermediates

In this paper we describe a detailed mechanistic studies on the [Fe^II(PBO)₂(CF₃SO₃)₂] (1), [Fe^II(PBT)₂(CF₃SO₃)₂] (2), and [Fe^II(PBI)₃](CF₃SO₃)₂ (3)-catalyzed (PBO = 2-(2′-pyridyl)benzoxazole, PBT = 2-(2′-pyridyl)benzthiazole, PBI = 2-(2′-pyridyl)benzimidazole) Baeyer–Villiger oxidation of cycloketones by dioxygen with cooxidation of aldehydes and peroxycarboxylic acids, including the kinetics on the reactivity of (μ-1,2-peroxo)diiron(III), acylperoxo- and iodosylbenzene-iron(III) species as key intermediates.     

Crystal Engineering of Schiff Base Zn(II) and Cd(II) Homo- and Zn(II)M(II) (M = Mn or Cd) Heterometallic Coordination Polymers and Their Ability to Accommodate Solvent Guest Molecules

Based on solvothermal synthesis, self-assembly of the heptadentate 2,6-diacetylpyridine bis(nicotinoylhydrazone) Schiff base ligand (H₂L) and Zn(II) and/or Cd(II) salts has led to the formation of three homometallic [CdL]_n (1), {[CdL]∙0.5dmf∙H₂O}_n (2) and {[ZnL]∙0.5dmf∙1.5H₂O}_n (3), as well as two heterometallic {[Zn_0.75Cd_1.25L₂]∙dmf∙0.5H₂O}_n (4) and {[MnZnL₂]∙dmf∙3H₂O}_n coordination polymers. Compound 1 represents a 1D chain, whereas 2–5 are isostructural and isomorphous two-dimensional structures. The entire series was characterized by IR spectroscopy, thermogravimetric analysis, single-crystal X-ray diffraction and emission measurements. 2D coordination polymers accommodate water and dmf molecules in their cage-shaped interlayer spaces, which are released when the samples are heated. Thus, three solvated crystals were degassed at two temperatures and their photoluminescent and adsorption–desorption properties were recorded in order to validate this assumption. Solvent-free samples reveal an increase in volume pore, adsorption specific surface area and photoluminescence with regard to synthesized crystals.     

Synthesis and Photosensitive Properties of Poly(aryl imino) Containing Azobenzene Group (PAI-A)

Using 4,4′‐dibromobenzophenone and 4,4′‐diaminoazobenzene as monomers, poly(aryl imino) containing azobenzene unit (PAI‐A) was synthesized via palladium‐catalyzed amination, and structurally characterized by means of FT‐IR, ¹H NMR spectra and elemental analysis, the results of which show an agreement with the proposed structure. The UV absorption spectra were tested under different conditions. Additionally, differential scanning calorimetry (DSC) and thermogravimetric (TG) measurements show that PAI‐A possesses high glass transition temperature (T_g>176°C) and good thermal stability with high decomposition temperatures in nitrogen atmosphere (T_D>410°C).     

N-Arylation of 3-Formylquinolin-2(1H)-ones Using Copper(II)-Catalyzed Chan–Lam Coupling

3-formyl-2-quinolones have attracted the scientific community’s attention because they are used as versatile building blocks in the synthesis of more complex compounds showing different and attractive biological activities. Using copper-catalyzed Chan–Lam coupling, we synthesized 32 new N-aryl-3-formyl-2-quinolone derivatives at 80 °C, in air and using inexpensive phenylboronic acids as arylating agents. 3-formyl-2-quinolones and substituted 3-formyl-2-quinolones can act as substrates, and among the products, the p-methyl derivative 9a was used as a substrate to obtain different derivatives such as alcohol, amine, nitrile, and chalcone.     

含偶氮苯聚芳亚胺的合成、表征和光谱分析

以4,4＇-二溴二苯甲酮和4,4＇-二氨基偶氮苯为单体,通过钯催化的胺基化反应缩聚合成了含偶氮苯基团的新型结构聚芳亚胺（PAI-A）．PAI-A结构通过FT—IR,^1H NMR和元素分析测定,测试结果和目标产物吻合良好．在不同的条件下测定了聚合物的光学性能．     

Photomagnetism of a Series of Dinuclear Iron(II) Complexes

Spin crossover : The photomagnetic properties of a series of [{Fe(NCS)(py‐X)}₂(bpypz)₂] (NCS=thiocyanate, py=pyridine, X=4‐Mepy, py, 3‐Mepy, 3‐Clpy and 3‐Brpy, and bpypz=3,5‐bis(pyridine‐2‐yl)pyazolate) binuclear complexes are close to the antiferromagnetic response of [{Fe(NCS)(3,5‐dmpy)}₃(bpypz)₂] (3,5‐dmpy=3,5‐dimethylpyrazine), which is characterised by two iron(II) metal ions in a high‐spin (HS) electronic configuration (see figure).

     

Stabilization of the Low‐Spin State in a Mononuclear Iron(II) Complex and High‐Temperature Cooperative Spin Crossover Mediated by Hydrogen Bonding

The tetrapyridyl ligand bbpya (bbpya=N,N‐bis(2,2′‐bipyrid‐6‐yl)amine) and its mononuclear coordination compound [Fe(bbpya)(NCS)₂] ( 1 ) were prepared. According to magnetic susceptibility, differential scanning calorimetry fitted to Sorai’s domain model, and powder X‐ray diffraction measurements, 1 is low‐spin at room temperature, and it exhibits spin crossover (SCO) at an exceptionally high transition temperature of T_1/2=418 K. Although the SCO of compound 1 spans a temperature range of more than 150 K, it is characterized by a wide (21 K) and dissymmetric hysteresis cycle, which suggests cooperativity. The crystal structure of the LS phase of compound 1 shows strong N?H???S intermolecular H‐bonding interactions that explain, at least in part, the cooperative SCO behavior observed for complex 1 . DFT and CASPT2 calculations under vacuum demonstrate that the bbpya ligand generates a stronger ligand field around the iron(II) core than its analogue bapbpy (N,N′‐di(pyrid‐2‐yl)‐2,2′‐bipyridine‐6,6′‐diamine); this stabilizes the LS state and destabilizes the HS state in 1 compared with [Fe(bapbpy)(NCS)₂] ( 2 ). Periodic DFT calculations suggest that crystal‐packing effects are significant for compound 2 , in which they destabilize the HS state by about 1500 cm^?1. The much lower transition temperature found for the SCO of 2 compared to 1 appears to be due to the combined effects of the different ligand field strengths and crystal packing.     

Inhibition of Insulin-Regulated Aminopeptidase (IRAP) by Arylsulfonamides

The inhibition of insulin-regulated aminopeptidase (IRAP, EC 3.4.11.3) by angiotenesin IV is known to improve memory and learning in rats. Screening 10 500 low-molecular-weight compounds in an enzyme inhibition assay with IRAP from Chinese Hamster Ovary (CHO) cells provided an arylsulfonamide (N-(3-(1H-tetrazol-5-yl)phenyl)-4-bromo-5-chlorothiophene-2-sulfonamide), comprising a tetrazole in the meta position of the aromatic ring, as a hit. Analogues of this hit were synthesized, and their inhibitory capacities were determined. A small structure–activity relationship study revealed that the sulfonamide function and the tetrazole ring are crucial for IRAP inhibition. The inhibitors exhibited a moderate inhibitory potency with an IC₅₀=1.1±0.5 μm for the best inhibitor in the series. Further optimization of this new class of IRAP inhibitors is required to make them attractive as research tools and as potential cognitive enhancers.     

Structure and Electronic Configuration of an Iron(II) Complex in a LIESST State: A Pump and Probe Method

Switchable molecules : The electronic configurations of the Fe center in trans‐[Fe(tzpy)₂(NCS)₂] in low‐spin, high‐spin, and LIESST states (LIESST=light‐induced excited spin‐state trapping) were confirmed by K‐ and L‐edge X‐ray absorption and magnetic measurements. The molecular structures at 40 K before and after irradiation are superimposed in the picture, which demonstrates a single‐crystal‐to‐single‐crystal transition by irradiation.

     

Octacyanidorhenate(V) Ion as an Efficient Linker for Hysteretic Two-Step Iron(II) Spin Crossover Switchable by Temperature,Light, and Pressure

A two-step hysteretic Fe^II spin crossover (SCO) effect was achieved in programmed layered Cs{[Fe(3-CNpy)₂][Re(CN)₈]}⋅H₂O ( 1 ) (3-CNpy=3-cyanopyridine) assembly consisting of cyanido-bridged Fe^II-Re^V square grid sheets bonded by Cs⁺ ions. The presence of two non-equivalent Fe^II sites and the conjunction of 2D bimetallic coordination network with non-covalent interlayer interactions involving Cs⁺, [Re^V(CN)₈]³⁻ ions, and 3-CNpy ligands, leads to the occurrence of two steps of thermal SCO with strong cooperativity giving a double thermal hysteresis loop. The resulting spin-transition phenomenon could be tuned by an external pressure giving the room-temperature range of SCO, as well as by visible-light irradiation, inducing an efficient recovery of the high-spin Fe^II state at low temperatures. We prove that octacyanidorhenate(V) ion is an outstanding metalloligand for induction of a cooperative multistep, multiswitchable Fe^II SCO effect.     

A Multifunctional N-Doped Cu–MOFs (N–Cu–MOF) Nanomaterial-Driven Electrochemical Aptasensor for Sensitive Detection of Deoxynivalenol

Deoxynivalenol (DON) is one of the most common mycotoxins in grains, causing gastrointestinal inflammation, neurotoxicity, hepatotoxicity and embryotoxicity, even at a low quantity. In this study, a facile electrochemical aptasensor was established for the rapid and sensitive determination of DON based on a multifunctional N-doped Cu-metallic organic framework (N–Cu–MOF) nanomaterial. The N–Cu–MOF, with a large specific surface area and good electrical conductivity, served not only as an optimal electrical signal probe but also as an effective supporting substrate for stabilizing aptamers through the interactions of amino (-NH₂) and copper. Under the optimal conditions, the proposed sensor provided a wide linear concentration range of 0.02–20 ng mL⁻¹ (R² = 0.994), showing high sensitivity, with a lower detection limit of 0.008 ng mL⁻¹, and good selectivity. The sensor’s effectiveness was also verified in real spiked wheat samples with satisfactory recoveries of 95.6–105.9%. The current work provides a flexible approach for the rapid and sensitive analysis of highly toxic DON in food samples and may also be easily extended to detect other hazardous substances with alternative target-recognition aptamers.     

A Mononuclear Uranium(IV) Single‐Molecule Magnet with an Azobenzene Radical Ligand

A tetravalent uranium compound with a radical azobenzene ligand, namely, [{(SiMe₂NPh)₃‐tacn}U^IV(η²‐N₂Ph₂^.)] ( 2 ), was obtained by one‐electron reduction of azobenzene by the trivalent uranium compound [U^III{(SiMe₂NPh)₃‐tacn}] ( 1 ). Compound 2 was characterized by single‐crystal X‐ray diffraction and ¹H NMR, IR, and UV/Vis/NIR spectroscopy. The magnetic properties of 2 and precursor 1 were studied by static magnetization and ac susceptibility measurements, which for the former revealed single‐molecule magnet behaviour for the first time in a mononuclear U^IV compound, whereas trivalent uranium compound 1 does not exhibit slow relaxation of the magnetization at low temperatures. A first approximation to the magnetic behaviour of these compounds was attempted by combining an effective electrostatic model with a phenomenological approach using the full single‐ion Hamiltonian.     

Photomagnetic Response in Highly Conductive Iron(II) Spin‐Crossover Complexes with TCNQ Radicals

Co‐crystallization of a cationic Fe^II complex with a partially charged TCNQ^.δ? (7,7′,8,8′‐tetracyanoquinodimethane) radical anion has afforded molecular materials that behave as narrow band‐gap semiconductors, [Fe(tpma)(xbim)](X)(TCNQ)_1.5?DMF (X=ClO₄^? or BF₄^?; tpma=tris(2‐pyridylmethyl)amine, xbim=1,1′‐(α,α′‐o‐xylyl)‐2,2′‐bisimidazole). Remarkably, these complexes also exhibit temperature‐and light‐driven spin crossover at the Fe^II center, and are thus the first structurally defined magnetically bistable semiconductors assembled with the TCNQ^.δ? radical anion. Transport measurements reveal the conductivity of 0.2 S cm^?1 at 300 K, with the low activation energy of 0.11 eV.