Electrocatalytic effects of carbon dissolution in Pd nanoparticles

Highly dispersed Pd nanoparticles were prepared by borohydride reduction of Pd(acac)(2) in 1,2-propanediol at an elevated temperature. They were uniformly dispersed on carbon black without significant aggregation. X-ray diffraction showed that carbons from the Pd precursor dissolved in Pd, increasing its lattice parameter. A modified reduction process was tested to remove the carbon impurities. Carbon removal greatly enhanced catalytic activity toward the oxygen reduction reaction. It also generated an inconsistency between the electronic modifications obtained from X-ray photoelectron spectroscopy and the electrochemical method. CO displacement measurements showed that the formation of Pd-C bonds decreased the work function of the surface Pd atoms.     

STUDIES ON THE HYDROGENATION OF METHYL ACRYLATE CATALYZED BY Pd/DVB CROSSLINKED POLY-(N-VINYL PYRROLIDONE)

Many kinds of dispersed Pd (0) supported on cross-linked poly (N-vinyl pyrrolidone) were prepared and characterized by IR and X-ray diffraction. Their hydrogenation properties of methyl acrylate have been examined. Experimental results indicate that the hydrogenation rate will reach a maximum as the degree of crosslinking increases to a certain point. The catalytic activity of the catalysts is closely related to the preparation condition and the particle size of Pd of the catalysts. Some other factors which affect the catalytic properties have also been studied.     

Living radical polymerization of acrylates mediated by 1,3-bis(2-pyridylimino)isoindolatocobalt(II) complexes: monitoring the chain growth at the metal

A new type of mediator for cobalt(II)-mediated radical polymerization is reported which is based on 1,3-bis(2-pyridylimino)isoindolate (bpi) as ancillary ligand. The modular synthesis of the bis(pyridylimino)isoindoles (bpiH) employed in this work is based on the condensation of 2-aminopyridines with phthalodinitriles. Reaction of the bpiH protio-ligands with a twofold excess of cobalt(II) acetate or cobalt(II) acetylacetonate in methanol gave [Co(bpi)(OAc)], which crystallize as coordination polymers, and a series of [Co(acac)(bpi)(MeOH)], which are mononuclear octahedral complexes. Upon heating the [Co(acac)(bpi)(MeOH)] compounds to 100 degrees C under high vacuum, the coordinated methanol was removed to give the five-coordinate complexes [Co(acac)(bpi)]. The polymerization of methyl acrylate at 60 degrees C was investigated by using one molar equivalent of the relatively short-lived radical source 2,2'-azobis(4-methoxy-2,4-dimethylvaleronitrile) (V-70) as initiator (monomer/catalyst/V-70: 600:1:1). The low solubility of the acetato complexes inhibits their significant activity as mediators in this reaction, whereas the acetylacetonate complexes control the radical polymerization of methyl acrylate more effectively. The radical polymerizations of the hexacoordinate complexes did not show a linear increase in number-average molecular weight (M(n)) with conversion; however, the polydispersities were relatively low (PDI=1.12-1.40). By using the pentacoordinate complexes [Co(acac)(bpi)] as mediators, a linear increase in M(n) values with conversion, which were very close to the theoretical values for living systems, and very low polydispersities (PDI<1.13) were obtained. This was also achieved in the block copolymerization of methyl acrylate and n-butyl acrylate. The intermediates with the growing acrylate polymer radical ((.)PA) were identified by liquid injection field desorption/ionization mass spectrometry as following the general formula [Co(acac)(4-methoxy-bpi)-(MA)(n)-R] (MA: methyl acrylate; R: C(CH(3))(CH(2)C(CH(3))(2)OCH(3))CN), a notion also confirmed by NMR end-group analysis.     

Selective hydrogenation of monosubstituted alkenes by Pd nanoparticles embedded in polyelectrolyte films

Pd nanoparticles embedded in multilayer polyelectrolyte films can be easily prepared through layer-by-layer adsorption of poly(acrylic acid) (PAA) and poly(ethyleneimine)-Pd2+ (PEI-Pd(II)) complexes followed by reduction of Pd(II) with NaBH4. Transmission electron microscopy confirms the formation of Pd particles with diameters of 1-3 nm. Remarkably, [PAA/PEI-Pd(0)]3PAA films catalyze the hydrogenation of monosubstituted alkenes with turnover frequencies that are as much as 100-fold higher than turnover frequencies for hydrogenation of multiply substituted double bonds. Selectivities in the hydrogenation of monosubstituted over multisubstituted double bonds are higher than those of Wilkinson's catalyst. Moreover, the turnover frequency for the hydrogenation of allyl alcohol did not change when the catalyst was recycled three times. Intramolecular selectivity for the hydrogenation of monosubstituted alkenes also occurs when substrate molecules contain both mono and multiply substituted double bonds. The combination of the encapsulating polyelectrolyte film and small nanoparticles apparently results in hindered access of multiply substituted double bonds to catalytic sites.     

Selective hydrogenation by Pd nanoparticles embedded in polyelectrolyte multilayers

Alternating adsorption of poly(acrylic acid) and a polyethylenimine-Pd(II) complex on alumina and subsequent reduction of Pd(II) by NaBH4 yield catalytic Pd nanoparticles embedded in multilayer polyelectrolyte films. The polyelectrolytes limit aggregation of the particles and impart catalytic selectivity in the hydrogenation of alpha-substituted unsaturated alcohols by restricting access to catalytic sites. Hydrogenation of allyl alcohol by encapsulated Pd(0) nanoparticles can occur as much as 24-fold faster than hydrogenation of 3-methyl-1-penten-3-ol. Additionally, the nanoparticle/polyelectrolyte system suppresses unwanted substrate isomerization, when compared to a commercial palladium catalyst. Selective diffusion through poly(acrylic acid)/polyethlyenimine membranes suggests that hydrogenation selectivities are due to different rates of diffusion to nanoparticle catalysts. First-order kinetics are also consistent with a diffusion-limited mechanism. Further exploitation of the versatility of polyelectrolyte films should increase selectivity in hydrogenation as well as other reactions.     

Rigid nanoscopic containers for highly dispersed, stable metal and bimetal nanoparticles with both size and site control

We demonstrate a novel strategy for the preparation of mesoporous silica-supported, highly dispersed, stable metal and bimetal nanoparticles with both size and site control. The supporting mesoporous silica, functionalized by polyaminoamine (PAMAM) dendrimers, is prepared by repeated Michael addition with methyl acrylates (MA) and amidation reaction with ethylenediamine (EDA), by using aminopropyl-functionalized mesoporous silica as the starting material. The encapsulation of metal nanoparticles within the dendrimer-propagated mesoporous silica is achieved by the chemical reduction of metal-salt-impregnated dendrimer-mesoporous silica by using aqueous hydrazine. The site control of the metal or bimetal nanoparticles is accomplished by the localization of inter- or intradendrimeric nanoparticles within the mesoporous silica tunnels. The size of the encapsulated nanoparticles is controlled by their confinement to the nanocavity of the dendrimer and the mesopore. For Cu and Pd, particles locate at the lining of mesoporous tunnels, and have diameters of less than 2.0 nm. For Pd/Pt, particles locate at the middle of mesoporous tunnels and have diameters in the range of 2.0-4.2 nm. The Pd and Pd/Pt nanoparticles are very stable in air, whereas the Cu nanoparticles are stable only in an inert atmosphere.     

Extraordinarily high activity in the hydrodesulfurization of 4,6-dimethyldibenzothiophene over Pd supported on mesoporous zeolite Y

Design and preparation of highly active hydrodesulfurization (HDS) catalysts is very important for the removal of air pollution. Herein, we report an extraordinarily active HDS catalyst, which is synthesized by loading of Pd on mesoporous zeolite Y (Pd/HY-M). The mesoporous zeolite Y is successfully synthesized using a water glass containing N,N-dimethyl-N-octadecyl-N-(3-triethoxysilylpropyl) ammonium [(C(2)H(5)O)(3)SiC(3)H(6)N(CH(3))(2)C(18)H(37)](+) cation as a mesoscale template. Compared with mesoporous Beta and ZSM-5 supported Pd catalysts (80.0% and 73.4% for Pd/HBeta-M and Pd/HZSM-5-M, respectively) as well as commercial catalyst of γ-Al(2)O(3) supported Pd catalyst (31.4%), Pd/HY-M catalyst exhibited very high activity in HDS of 4,6-dimethyldibenzothiophene (4,6-DM-DBT, 97.3%). The higher activity of Pd/HY-M than that of Pd/HBeta-M and Pd/HZSM-5-M is assigned to the larger micropore size of zeolite Y compared to that of Beta and ZSM-5. Theoretical simulation and adsorption experimental data show that 4,6-DM-DBT has difficulty entering the micropores of ZSM-5 and Beta zeolites, but the micropores of Y zeolite are accessible.     

Synthesis of ultrathin FePtPd nanowires and their use as catalysts for methanol oxidation reaction

We report a facile synthesis of ultrathin (2.5 nm) trimetallic FePtPd alloy nanowires (NWs) with tunable compositions and controlled length (<100 nm). The NWs were made by thermal decomposition of Fe(CO)(5) and sequential reduction of Pt(acac)(2) (acac = acetylacetonate) and Pd(acac)(2) at temperatures from 160 to 240 °C. These FePtPd NWs showed composition-dependent catalytic activity and stability for methanol oxidation reaction. Among FePtPd and FePt NWs as well as Pd, Pt, and PtPd nanoparticles (NPs) studied in 0.2 M methanol and 0.1 M HClO(4) solution, the Fe(28)Pt(38)Pd(34) NWs showed the highest activity, with their mass current density reaching 488.7 mA/mg Pt and peak potential for methanol oxidation decreasing to 0.614 V from 0.665 V (Pt NP catalyst). The NW catalysts were also more stable than the NP catalysts, with the Fe(28)Pt(38)Pd(34) NWs retaining the highest mass current density (98.1 mA/mg Pt) after a 2 h current-time test at 0.4 V. These trimetallic NWs are a promising new class of catalyst for methanol oxidation reaction and for direct methanol fuel cell applications.     

Effect of Pd nanoparticle size on the catalytic hydrogenation of allyl alcohol

We report a particle size dependence for the rate of hydrogenation of allyl alcohol using 1.3-1.9 nm Pd dendrimer-encapsulated nanoparticle (DEN) catalysts. For particles with diameters of <1.5 nm and containing <147 Pd atoms, the modulation in catalytic activity is due to the electronic properties of the particle. For the larger particles, 1.5-1.9 nm in diameter and containing an average of 147-250 Pd atoms, the size effect is a result of geometrical constraints. Specifically, the hydrogenation reaction is shown to occur preferentially on the face atoms of the larger nanoparticles.     

Liquid-phase hydrogenation of alkenes and aromatic compounds with Pd-loaded oxidized diamond catalyst

Hydrogenation reactions of alkenes (cyclohexene, ethyl acrylate, styrene and 1,5-cyclooctadiene) and aromatic compounds (o-, m- and p-xylene) were carried out in order to examine the activity of palladium-loaded surface-oxidized diamond (Pd/O-Dia) catalyst in liquid-phase hydrogenation. The catalytic performance was compared to commercial palladium-loaded activated carbon (Pd/C) catalyst. The catalyst activities were evaluated by conversions of reactants and H₂ uptake rates in the early stage of the reaction. In all the hydrogenation reactions of alkenes and aromatic compounds, the activity of Pd/O-Dia was almost the same as or slightly higher than that of Pd/C. Dispersion of Pd metal was measured by a CO-pulsed adsorption technique and TEM observations of the catalysts. Pd dispersions were on the same order of magnitude according to the CO-pulsed adsorption technique, although the Pd/C catalyst had a higher surface area (718 m²/g) than that of Pd/O-Dia (23 m²/g). The Pd particle sizes on O-Dia measured by TEM observation were slightly smaller than those on the activated carbon. Such highly dispersed Pd particles on O-Dia would contribute to higher activity for the hydrogenation reaction of alkenes and aromatic compounds.     

Molybdenum oxides as highly effective dehydrative cyclization catalysts for the synthesis of oxazolines and thiazolines

In the presence of molybdenum oxide the dehydrative cyclization of N-acylserines, N-acylthreonines, and N-acylcysteines can be carried out under Dean-Stark conditions in toluene to give oxazolines and thiazolines. The ammonium salts (NH(4))(6)Mo(7)O(24).4H(2)O and (NH(4))(2)MoO(4) have excellent catalytic activities for the dehydrative cyclization of serine and threonine derivatives, and the acetylacetonate complex MoO(2)(acac)(2) has a remarkable catalytic activity for the dehydrative cyclization of cysteine derivatives. In addition, polyaniline-supported MoO(2)(acac)(2) can easily be recovered and reused.     

Pd supported on N-doped-ordered mesoporous carbons’ catalysts for selective hydrodechlorination of 4-chlorophenol

Pd catalysts supported on N-doped-ordered mesoporous carbons (NOMC) have been prepared and tested for selective hydrogenation of 4-chlorophenol (4-CP) with H₂. The difference from the previous methods is that the NOMC was synthesized using urea as nitrogen source via one-pot route. The rate constant of Pd/NOMC for hydrodechlorination of 4-CP was about 135.9 h^?1 which were higher than Pd/OMC (65.6 h^?1) and Pd/AC (20.8 h^?1). It could be attributed to the synergetic effects of mesoporous structure, N-doped supports, and the stabilized small PdNPs. The conversion changed from 100 to 90.2% after the sixth reaction using Pd/NOMC which could be caused by the palladium leaching.     

Pd/PAMAM(聚酰胺-胺)/SBA-15催化剂的制备及催化性能

利用聚酰胺-胺型(PAMAM)树形分子为模板制备出粒径可控的Pd纳米颗粒(Pd DEN),然后通过超声波法制备了SBA-15分子筛负载的Pd/PAMAM复合材料(Pd SDEN)。XRD和TEM测试表明,负载后Pd纳米颗粒的粒径没有变化,且均匀分布在分子筛的孔道中,SBA-15分子筛的结构也没有变化。以对硝基苯酚还原为例,测试了Pd SDEN的催化性能,与Pd DEN相比,其具有更高的催化效率,重复使用5次后仍具有较好的催化活性,反应速率仅下降4%,且Pd/PAMAM复合材料仍能稳定存在于分子筛的孔道中。     

(IPr)Pd(acac)Cl: an easily synthesized, efficient, and versatile precatalyst for C-N and C-C bond formation

A very straightforward synthesis of (IPr)Pd(acac)Cl from two commercially available starting materials, Pd(acac)2 and IPr.HCl [acac = acetylacetonate; IPr = N,N'-bis(2,6-diisopropylphenyl)imidazol-2-ylidene], has been developed. The resulting complex, (IPr)Pd(acac)Cl (1), has proven to be a highly active PdII precatalyst in the Buchwald-Hartwig and the alpha-ketone arylation reactions. A wide range of substrates has been screened, including unactivated, sterically hindered, and heterocyclic aryl chlorides.     

Spectroscopic Study of the Interaction of the Pd(acac)(C3-acac)PPh3Complex with BF3OEt2 in the Presence of PPh3

The interaction between the components of a catalytic system Pd(acac)(C³-acac)PPh₃+nPPh₃+ mBF₃OEt₂(where n= 1–4, m= 0.25–4, and acac is the acetylacetonate ligand) in benzene is examined by UV and IR spectroscopy. With a relative excess of PPh₃(n> m), acacH and [Pd(acac)(PPh₃)₂]⁺BF^– ₄were the main products, whereas BF₂acac and a polynuclear complex of PdF₂with PPh₃also containing Pd²⁺(BF^– ₄)₂units were formed with a relative excess of BF₃OEt₂(n< m).     

Improvement of the Pd/Al2O3 Catalyst by the Control of the Sol-Gel Preparative Parameters

In this work, the metal dispersion of the Pd/Al₂O₃ catalyst prepared by sol-gel method is improved by an adequate optimisation of the preparative variables. First, the gelation temperature and the ageing time are selected, in order to avoid the reduction of the metal precursor (palladium acetylacetonate, Pd(acac)₂) by the solvent (sec-butanol, sB). The metal sintering effect on the catalysts treated in oxygen at 500°C is then minimized when the alumina pore size is controlled by the variation of the alumium alkoxide (AsB) concentration and the acetic acid amount ([AcA]/[AsB]). The appearance of new palladium particles on the alumina surface and the matching between the particle diameters and the pore sizes were also effective for the metallic surface area improvement on the samples treated in oxygen at 800°C. Compared to the reference catalysts, the higher metal dispersion obtained on the sol-gel ones was the determinant factor for their higher catalytic activity in methane combustion.     

Pd/PEI-GNs复合材料的制备及对对硝基苯酚的电催化还原性能

以聚乙烯亚胺(PEI)功能化的石墨烯(PEI-GNs)为载体, 利用电化学还原法制备了Pd/PEI-GNs复合物. 采用红外光谱仪、 X射线光电子能谱仪、 X射线粉末衍射仪和扫描电子显微镜等对复合物的组成、 结构和形态进行了表征. 结果表明, Pd/PEI-GNs复合物中Pd颗粒均匀分散在PEI-GNs基底上. 采用循环伏安法、 交流阻抗法和计时电流法等电化学方法研究了Pd/PEI-GNs复合物的电化学性能. 结果表明, 制备的复合物催化剂对对硝基苯酚还原具有较好的催化活性和稳定性, 这主要是由于Pd纳米颗粒在PEI-GNs载体上均匀分散以及PEI-GNs优异的电子传递能力.     

介孔碳负载的Pd催化剂催化β-谷甾醇加氢制备β-谷甾烷醇

采用液相还原法制备了介孔碳(CMC)担载的Pd催化剂,用于β-谷甾醇加氢制备β-谷甾烷醇反应.与活性碳担载的Pd催化剂相比,Pd/CMC的活性更高,这归因于该催化剂具有较大的孔径,从而有利于较大分子的催化加氢反应.     

氮掺杂有序介孔碳负载超小尺寸铂纳米颗粒催化硝基苯类化合物选择加氢

氮掺杂有序介孔碳材料不仅具有高的比表面积、大的孔容和均一可调的孔径等优点,其骨架中丰富的氮原子还可以对材料的物理化学性质、配位金属电荷密度等进行调控,是一类优异的催化剂载体.本文利用软模板(嵌段共聚物F127为模板),以间氨基苯酚为碳源和氮前体,制备出较高含氮量(9.58 wt%)和比表面积(417 m2/g),以及规则孔径分布的介孔碳材料.结果表明,制备的材料具有三维立方相结构.以该碳材料作为载体,使用传统浸渍氢气还原的策略负载纳米铂颗粒.发现氮掺杂的载体能够有效控制金属纳米颗粒的尺寸,可实现超小尺寸Pt纳米颗粒的有效负载(1.0±0.5 nm),且纳米颗粒均匀分布于介孔碳材料的孔道中.相比而言,使用相同负载方法的情况下,以不掺氮的介孔碳材料为载体,纳米粒子的尺寸较难控制(4.4±1.7 nm)且会发生孔道外颗粒聚集的情况.研究表明,骨架中的氮原子与金属间弱的相互作用对纳米粒子有稳定作用.这对制备超小尺寸的金属纳米粒子催化剂具有一定的指导意义.此外,由于纳米粒子的尺寸将大大影响催化剂活性中心的暴露程度,进而影响催化剂活性.因此,我们以硝基苯类化合物的氢化反应来评价该催化剂的催化性能.在室温和1 MPa H2的温和条件下,氮掺杂的介孔碳负载催化剂表现出了优异的催化性能.反应0.5 h,对氯硝基苯可完全转化,且选择性高达99%.相比而言,商业化的Pt/C催化剂上反应的转化率和选择性分别为89%和90%.其它传统催化剂的比较,如Pt/SiO2,Pt/TiO2,同样表明,氮掺杂介孔碳负载的催化剂具有更优异的催化性能.在相同反应条件下,Pt/SiO2催化剂只能得到46%的转化率和93%的选择性,而Pt/TiO2催化剂虽然能够实现完全转化,但选择性也仅为91%.由此可见,氮掺杂的负载催化剂可大大提高反应活性和选择性,能有效抑制脱氯现象的发生.这种高的催化性能可能与催化剂的介孔结构、氮功能化载体以及超小尺寸的Pt纳米粒子的稳定有关.由于氮原子和介孔孔道的限域作用,氮掺杂介孔碳负载的催化剂也具有良好的催化稳定性,循环使用10次后,催化活性和选择性几乎没有下降.结果表明,循环使用后的催化剂金属粒子尺寸变化不大,进一步表明氮掺杂介孔碳载体对金属纳米颗粒的稳定作用.     

Nucleophilic acyl substitutions of esters with protic nucleophiles mediated by amphoteric, oxotitanium, and vanadyl species

[reaction: see text] A diverse array of oxometallic species were examined as catalysts in nucleophilic acyl substitution (NAS) reactions of methyl (or ethyl) esters with protic nucleophiles. Among them, oxotitanium acetylacetonate (TiO(acac)(2)) and vanadyl chloride (VOCl(2)-(THF)(x)()) served as the most efficient and water-tolerant catalysts. Transesterifications of methyl and/or ethyl esters with functionalized (including acid- or base-sensitive) 1 degrees and 2 degrees alcohols can be carried out chemoselectively in refluxed toluene or xylene in a 1:1 substrate stoichiometry using 1 mol % catalyst loading. The resultant products were furnished in 85-100% yields by simple aqueous workup to remove water-soluble catalysts. The new NAS protocol is also amenable to amines and thiols in 74-91% yields, albeit with higher loading (2.5 equiv) of protic nucleophiles. Representative examples of commercial interests such as Padimate O and antioxidant additives for plastics were also examined to demonstrate their practical applications. A 1:1 adduct between TiO(acac)(2) and a given 1-octadecanol was identified as (C(18)H(37)O)(2)Ti(acac)(2) and was responsible for its subsequent NAS of methyl esters.