环三甲撑三硝胺(RDX)结构和性质的DFT研究

环三甲撑三硝胺(RDX)是综合性能好、使用极广的高能炸药。本文用密度泛函理论(DFT)B3LYP方法,取6-31G*基组,求得其分子几何构型、电子结构、IR谱和热力学性质。全优化几何构型和电子结构均具有C3V对称性。在相邻原子之间以NNO2键的Mulliken集居数最小,表明其间电子分布较少,预示其为热解和起爆的引发键。IR谱与实验结果良好相符。计算所得298-1200K的热力学性质,对进一步深入研究RDX的反应和性质有助。     

环四甲撑四硝胺(HMX)结构和性质的DFT研究

用密度泛函理论(DFT)B3LYP方法,取6-31G基组,求得环四甲撑四硝胺分子的几何构型、电子结构、 IR谱和298～1200 K的热力学性质.全优化几何构型和电子结构均具有Ci对称性.在相邻原子之间以N-NO2键的Mulliken集居数最小,表明其间电子分布较少,预示其为热解和起爆的引发键.IR谱与实验结果良好相符.     

环杂硝胺结构和性能的DFT比较研究

用密度泛函理论（DFT）B3LYP方法,在6－31G^**基组水平下,全优化计算了 环二甲撑二硝胺（DAX）、环三甲撑三硝胺（RDX）、环四甲撑四硝胺（HMX）和环 五甲撑五硝胺（CRX）共4种环杂硝胺同系物的分子几何构型、电子结构、IR谱和热 力学性质,揭示了它们结构和性质的异同。基于Kamlet公式计算了这4种化合物的 爆速和爆压,求得与已有实验相符的递变规律。     

叠氮二氢硼多聚体结构和性质的理论研究(英文)

本文采用DFT-B3LYP方法,以不同基组对叠氮二氢硼多聚体(H2BN3)n (n=1-4)进行计算研究.二聚体(H2BN3)2(C2h对称性)中含B2N2平面四元环结构.船式(Cs对称性)和椅式(C3v对称性)三聚体(H2BN3)3的结合能相近(-122 和 -126 kJ·mol-1),其中均含B3N3六元环结构.拥有B4N4八元环结构的四个四聚体的结合能只有稍微差别.与单体相比,簇合物的结构参数变化较大.由ΔG0T可知,298.2 K下单体形成二聚体在热力学上是不利的,而形成三聚体和四聚体是有利的.     

戊唑醇的分子结构、理论计算及热力学性质研究

在甲苯溶剂中利用缓慢蒸发法得到1-(4-氯苯基)-4,4-二甲基-3-(1H-1,2,4-三唑基甲基)戊醇-3（戊唑醇）的单晶,通过 X射线单晶结构分析法测定其晶体结构,晶体属单斜晶系,空间群为P2(1)/c,晶胞参数为：a = 1.1645(1) nm,b = 1.6768(2) nm,c = 1.7478(2) nm,β= 92.055(2),Dcalc.= 1.199 g/cm3,Z = 4,F(000)= 264。运用密度泛函理论 (DFT) B3LYP得到其优化几何构型并得到其频率。计算得到的结构参数与相应的实验值十分接近。运用微热量仪对标题物进行比热容测定,在所测温度范围283~353 K内,比热容随温度呈稳定的线性变化,根据测定的比热容方程,计算出戊唑醇以298.15 K为基础在283~353 K温区的的热力学函数：焓、熵和吉布斯自由能。     

六硝基六氮杂三环十二烷的结构和性能--HEDM分子设计

The compound Hexanitrohexaazatricyclododecane was designed and calculated by using the density functional theory method at the B3LYP/6-31G level. According to the calculated results, there are two optimized conformational structures, boat (α) and chair (β). It is found that the former is more stable based on the analysis of total energies, frontier molecular orbital energies and Mulliken populations. The IR spectra were obtained and assigned by means of normal-mode analyses. Thermodynamic properties at 200-800 K were provided using the statistical thermodynamics method. Finally, the detonation velocity and detonation pressure were predicted by Kamlet formula based on the calculated theory density and heat of formation. The predicted detonation velocity and detonation pressure of α conformer are 9.46 km/s and 41.74 GPa, while those of β are 9.34 km/s and 40.02 GPa, respectively.     

六硝基芪衍生物的红外光谱和热力学性质的理论研究

用量子化学密度泛函理论方法,在B3LYP/6-31G*水平下,对六硝基芪衍生物进行了几何构型全优化和电子结构计算。通过振动分析,求得它们的红外光谱并作归属。将理论计算IR谱与已知实验结果进行比较,表明本文所提供的计算结果是可靠的。对谐振频率以0.96进行标度后基于统计热力学原理求得它们的热力学性质,探讨了热力学性质随硝基数、氨基数、羟基数和温度变化的规律,发现有很好的线性关系,体现了很好的基团加和性。     

3C-SiC的结构和热力学性质

利用第一性原理平面波模守恒赝势密度泛函理论研究了3C-SiC的结构, 其零温(0 K)零压下的晶格常数、体弹模量及其对压强的一阶导数、弹性常数的计算结果与实验值和其它理论计算结果相符合. 通过准谐德拜模型, 得到了不同温度不同压强下的热容和德拜温度, 发现热容随着压强增加而减小, 德拜温度随压强增加而增加, 并成功地获得了相对晶格常数、相对体积、体弹模量、热膨胀系数与温度和压强的关系.     

环张力驱动环醚单体开环聚合的DFT验证北大核心CSCD

高分子化学教学中,在向学生讲授环状单体开环聚合驱动力时,单体的环张力是决定其能否进行开环聚合的一个非常重要的热力学因素,但有时并非是根本因素。在部分教材上提及顺式-和反式-8-氧杂双环[4.3.0]壬烷(I)、顺式-和反式-7,9-二氧杂双环[4.3.0]壬烷(II)两对顺反异构体时,都认为它们是由于反式异构体环张力大而易于开环聚合。本文通过密度泛函理论(Density Functional Theory,DFT)方法分别计算了它们发生开环聚合的Gibbs自由能变化,发现前者I单体两个异构体能量非常接近,不存在环张力大小的区别,而反式异构体开环产物在能量上更加稳定,利于开环过程。后者II单体则确实是因为反式环状单体的环张力比顺式异构体高,从而有利于开环聚合。本文希望通过这两个实例的DFT计算,阐明这两种不同的机理,并且向学生们介绍量子化学计算方法。     

苯和苯胺类硝基衍生物的红外光谱和热力学性质的理论研究

用量子化学密度泛函理论方法,在B3LYP/6-31G*水平下,对苯和苯胺类硝基衍生物进行了几何构型全优化和电子结构计算。通过振动分析,求得它们的红外光谱并作归属。将理论计算IR谱与已知实验结果进行比较,表明本文所提供的计算结果是可靠的。对谐振频率以0.96进行标度后基于统计热力学原理求得它们的热力学性质,探讨了热力学性质随硝基数、氨基数和温度变化的规律,发现有很好的线性关系,体现了很好的基团加和性。     

密度泛函理论和从头算方法对四唑负离子的比较研究

运用多种密度泛函理论(DFT)方法和从头算(abinitio)方法研究了四唑负离子的分子几何、电子结构、红外光谱和热力学性质.结果表明,B3LYP-DFT法与MP2-abinitio法计算结果较吻合,故可用于对四唑衍生物及其配合物的系统研究.     

Theoretical investigation of nitro derivatives of tetrazole with density functional theory (DFT)

The B3LYP of density function theory (DFT) method was employed to calculate seven nitrotetrazoles. The optimized geometries, IR spectra and thermodynamic properties at 6-31G* level are obtained. Their heats of formation were computed accurately using the designed isodemic and isogyric reactions. The calculated total energies and heats of formation consistently show that C-nitrotetrazoles are more stable than the N-isomers.     

A theoretical study on the vibrational spectra and thermodynamic properties for the nitro derivatives of phenols

The nitro derivatives of phenols are optimized to obtain their molecular geometries and electronic structures at the DFT-B3LYP/6-31G* level. Their IR spectra are obtained and assigned by vibrational analysis and are reliable compared with the experimental results. Based on the frequencies scaled by 0.96 and the principle of statistic thermodynamics, the thermodynamic properties are evaluated, which are linearly related with the number of nitro and hydroxy groups as well as the temperature, obviously showing good group additivity.     

DFT Predictions on Structures and Stabilities of Eleven-vertex nido-and cioso-Heteroboranes

Based on the octadecahedron of eleven-vertex closo-borane,the eleven-vertex closo-heteroborane was suggested with nonmetallic atoms instead of the different nonequivalent boron,and the stabilities were predicted at G96PW91/6-31+G(3d,2p) level.The small heteroatoms,C,N,O,preferentially occupy vertex 2 with the absolutely lowest relative energy to form the high stabilization closo-heteroboranes.They cap four-membered rings to satisfy the geometrical demand of short B-Z bonds.The electron attractions from the vicinal boron atoms make the frameworks shrink.Differently,Si and Ge preferentially substitute for boron at vertex 1 with six tight B-Z bonds and form stabilized molecules.P,As,S,and Se tend to occupy vertex 4 and the optimized structures belong to the nido configurations,in contrast to high electronegative heteroatoms,S and Se transfer less negative charges to framework and the electropositive heteroatoms,Si and Ge transfer more negative charges to framework to form the delocalization structures.The HOMO-LUMO gaps show that most of predicted clusters possess chemical stabilities.The substitutions of heteroatoms for boron atoms in eleven-vertex closo-hcteroboranes are consistent with the topological charge stabilization rule proposed by Gimarc.     

Theoretical studies on the structures, thermodynamic properties, detonation properties, and pyrolysis mechanisms of four trinitrate esters

Density function theory (DFT) has been employed to study the geometric and electronic structures of four trinitrate ester including nitroglycerin (NG), butanetriol trinitrate (BTTN), trimethanolethane trinitrate (TMETN) and trimethylolpropane trinitrate (TMPTN) at the B3LYP/6-31G^* level. Their IR spectra were obtained and assigned by vibrational analysis. Based on the frequencies scaled by 0.96 and the principle of statistic thermodynamics, the thermodynamic properties were evaluated, which were linearly related with the number of methylene groups as well as the temperature, obviously showing good group additivity. Detonation performances were evaluated by the Kamlet–Jacobs equations based on the calculated densities and heats of formation. It is found that density, detonation velocity, detonation pressure are decrease with the increase of the number methylene groups. Thermal stability and the pyrolysis mechanism of the title compounds were investigated by calculating the bond dissociation energies (BDE) at the B3LYP/6-31G^* level. For the nitrate esters, the ONO₂ bond is a trigger bond during thermolysis initiation process.     

Structure and vibrational spectra of dicyclopentadienylzinc. A DFT study

The quantum-chemical DFT calculations of the Cp₂Zn structure confirm the conclusion made earlier from the vibrational spectra that the sandwich structure (⁵-C₅H₅)₂Zn (A) is not energetically favorable and more favorable are the close in energy -structure (⁵-C₅H₅)(¹-C₅H₅)Zn (B) and -structure (¹-C₅H₅)₂Zn (C). The vibrational spectra of structures B and C with the DFT-derived force fields were calculated. A comparison of the calculated spectra of the isolated Cp₂Zn molecules with the experimental data gives no way of deciding between the B and C structures. It is most likely that the molecule is nonrigid and experiences a strong influence from the nearest environment in solution or in the crystalline state.