Size tuning of luminescent silicon nanoparticles with meso-porous silicon membranes

Size tuning of silicon (Si) nanoparticles (NPs) with the use of meso-porous silicon (meso-PS) free-standing layers is reported for the first time. Accumulation of Si NPs inside the membrane pores during the filtering process (NP transport through the meso-PS) leads to an auto-filtration effect (called Si-by-Si (SBS) filtration) allowing more efficient size selection of the NPs. General complex fractal shape and surface chemistry of the whole porous network, layer thickness as well as a given initial NP size dispersion determine final size of the NPs in the filtered solution. Moreover, quantum of step-like NP size increasing equal to 0.12 nm was found.     

Combining Electrodeposition and Optical Microscopy for Probing Size‐Dependent Single‐Nanoparticle Electrochemistry

Electrodeposition of nanoparticles (NPs) is a promising route for the preparation of highly electroactive nanostructured electrodes. By taking advantage of progressive electrodeposition, disordered arrays with a wide size distribution of Ag NPs are produced. Combined with surface‐reaction monitoring by using highly sensitive backside absorbing‐layer optical microscopy (BALM), such arrays offer a platform for screening size‐dependent electrochemistry at the single NP level. In particular, this strategy allows rationalizing the electrodeposition dynamics at the single‐NP level (>10 nm), up to the point of quantifying the presence of metal nanoclusters (<2 nm), and probing easier NP oxidation with size decrease, either through electrochemical or galvanic reactions.     

In situ coarsening study of inverse micelle-prepared Pt nanoparticles supported on γ-Al2O3: pretreatment and environmental effects

The thermal stability of inverse micelle prepared Pt nanoparticles (NPs) supported on nanocrystalline γ-Al(2)O(3) was monitored in situ under different chemical environments (H(2), O(2), H(2)O) via extended X-ray absorption fine-structure spectroscopy (EXAFS) and ex situ via scanning transmission electron microscopy (STEM). Drastic differences in the stability of identically synthesized NP samples were observed upon exposure to two different pre-treatments. In particular, exposure to O(2) at 400 °C before high temperature annealing in H(2) (800 °C) was found to result in the stabilization of the inverse micelle prepared Pt NPs, reaching a maximum overall size after moderate coarsening of ～1 nm. Interestingly, when an analogous sample was pre-treated in H(2) at ～400 °C, a final size of ～5 nm was reached at 800 °C. The beneficial role of oxygen in the stabilization of small Pt NPs was also observed in situ during annealing treatments in O(2) at 450 °C for several hours. In particular, while NPs of 0.5 ± 0.1 nm initial average size did not display any significant sintering (0.6 ± 0.2 nm final size), an analogous thermal treatment in hydrogen leads to NP coarsening (1.2 ± 0.3 nm). The same sample pre-dosed and annealed in an atmosphere containing water only displayed moderate sintering (0.8 ± 0.3 nm). Our data suggest that PtO(x) species, possibly modifying the NP/support interface, play a role in the stabilization of small Pt NPs. Our study reveals the enhanced thermal stability of inverse micelle prepared Pt NPs and the importance of the sample pre-treatment and annealing environment in the minimization of undesired sintering processes affecting the catalytic performance of nanosized particles.     

Synthesis of CdS, ZnS and Ag2S nanoparticles stabilized by sodium bis(2-ethylhexyl)sulfosuccinate and polyoxyethylenesorbitan monooleate in aqueous medium

The effect of synthesis conditions (molar ratio between precursors, concentration of surfactants, synthesis temperature) on the size of CdS, ZnS and Ag₂S nanoparticles (NPs) stabilized by sodium bis(2-ethylhexyl)succinate and polyoxyethylenesorbitan monooleate was studied. It was established that stabilization by polyoxyethylenesorbitan results in formation of smaller NPs (～8 nm) as compared to that in the presence of sodium bis(2-ethylhexyl)sulfosuccinate (14–60 nm), which is due to the difference between the adsorption rates of these surfactants onto the surface of synthesized NPs. The resulting aqueous dispersions of CdS, ZnS and Ag₂S NPs exhibit long-term stability to sedimentation. The nanoparticle size increases insignificantly with temperature increasing to 65–70°C and rises abruptly at higher temperatures. The increase in the ratio between concentrations of precursors (sulfide and metal ions) also results in an increase in NP size, allowing one to synthesize nanoparticles of prescribed sizes. The optical properties of the resulting nanoparticles were studied. The positions of the exciton peaks and the luminescence intensity peaks of the dispersions of synthesized CdS and ZnS NPs were determined.     

Using SEC for Analyzing the Sizes of Au/Pt Core/Shell Nanoparticles

This paper describes the use of size-exclusion chromatography (SEC) to characterize the sizes of fabricated Au/Pt core/shell nanoparticles (NPs), which were monitored using a polymer-based SEC column (pore size: ca. 400 nm) and a mobile phase of 10 mM sodium dodecyl sulfate (SDS). The plot of the retention time with respect to the logarithm of the size of the Au NPs was very linear (R ² = 0.999) for NP diameters falling in the range from 5.3 to 59.9 nm. The relative standard deviation (n = 5) of these retention times was less than 0.20%. When using SEC to analyze synthetic products, we found that the sizes of the fabricated Au/Pt core/shell NPs could be controlled via modification of the volumes of the seed, SDS, and sodium hydroxide solutions. A good correlation existed between the sizes determined through SEC and those determined using transmission electron microscopy. Thus, polymer-based SEC appears to be a useful technique for monitoring the sizes of NPs—and nanomaterials in general.     

Size and surface effects on the magnetic properties of NiO nanoparticles

NiO nanoparticles (NPs) were prepared by a sol-gel process using the citrate route. The sol-gel parameters were tuned to obtain samples with different average particle sizes, ranging from 12 to 70 nm. Magnetic characterization revealed an increase in the blocking temperature with the diameter of the NPs and an increase in the effective magnetic anisotropy (K(eff)) with decreasing particle size. The magnetic moment per particle was calculated for all samples using the susceptibility value at T = 300 K. The number of uncompensated spins per NP was found to be proportional to n (n(S)≡ total number of spins), indicating that they are randomly distributed on the NP surface. For small diameters (<30 nm) the surface anisotropy constant was estimated, using, for NiO NPs, a recent model describing the evolution of K(eff) with particle size. Hysteretic loops performed at low temperatures after field cooling displayed loop shifts (～6.5 kOe in the field axis and ～0.18 emu g(-1) vertically), coercive field enhancement (H(C)≈ 4.8 kOe) and training effects for the smaller NPs. The sample with NPs of larger diameters presented magnetic properties close to those of bulk NiO.     

In vitro permeation of gold nanoparticles through rat skin and rat intestine: effect of particle size

Purpose of the present work was to study in vitro permeation of gold nanoparticles (NPs) through isolated rat skin and intestine. Another objective was to see the effect of particle size on permeation of the gold NP. Gold NP of 15 nm, 102 nm and 198 nm were synthesized and used for study. Franz diffusion cells were used to evaluate permeation of gold NP from rat skin whereas 'intestinal sac' method was used for assessing intestinal permeation. Number density of gold NP was analyzed by UV-vis spectroscopy whereas amount of gold permeated was measured by ICP mass spectrometry. The absorption and localization of gold NP through rat skin was studied by TEM. Qualitative analysis of gold inside of the rat skin was performed by energy dispersive X-ray spectroscopy (EDS). Gold NP showed negative zeta potential. UV-vis absorption spectra of 15 nm, 102 nm and 198 nm gold NP showed lambda(max) at 520 nm, 535 nm and 577 nm, respectively. SEM study revealed spherical morphology of NP. Gold NP showed size dependent permeation through rat skin and intestine. 15 nm gold NP showed higher permeation compared to 102 nm and 198 nm gold NP. Interestingly, 102 nm and 198 nm gold NP showed lag time of 3h and 6h in case of rat skin only. As the size of the gold NP increased, permeability coefficient and diffusion coefficient was found to be decreased. The permeation of gold NP through intestine was higher than that of skin. TEM study of rat skin revealed accumulation of smaller size gold NP in deeper region of skin whereas larger particles were observed mainly in epidermis and dermis. Presence of gold inside of rat skin was confirmed by EDS. Gold NP would be an interesting carrier for transdermal as well as for oral delivery. The study demonstrated initial proof of concept of percutaneous permeation of smaller size gold particles.     

Concentration–polarization effect of poly(sodium styrene sulfonate) on size distribution of colloidal silver nanoparticles during diafiltration experiments

Polyelectrolyte (PEL)-based dual systems and nanoparticles (NPs) are two topics which have generated great interest as a result of their many and novel applications. Here, PEL–NPs system which appears transitorily when a high molecular weight PEL solution is mixed with metal NP colloidal dispersions during diafiltration is studied. The aim of this paper was to analyze the concentration–polarization effect of PEL molecules on size distribution of NPs capable to pass through the ultrafiltration membrane. Poly(sodium styrene sulfonate) (PSSNa) and silver nanoparticles (AgNPs) were used as PEL and metal NP colloidal dispersion, respectively. It was seen that particle size decreased from 42.4?±?37.8 to 10.1?±?0.7 nm in the presence of PSSNa and concentration–polarization. In addition, our results indicate that polarization–concentration phenomenon can be used to modify the size distribution of NP colloidal dispersions, that by changes of polarization–concentration features is possible the modification of NP size in the permeate during diafiltration experiments and that in presence of concentration–polarization, PSSNa was only a modifier factor of medium. In addition, it was observed that exclusion size of ultrafiltration membrane is an important element for establishing of particle size in the permeate.     

Pistacia atlantica leaf extract mediated synthesis of silver nanoparticles and their antioxidant,cytotoxicity, and antibacterial effects under in vitro condition

Recently, researchers have investigated the therapeutical properties of metal nanoparticles especially silver nanoparticles in vitro and in vivo conditions. The aim of the experiment was green synthesis and chemical characterization of silver nanoparticles from aqueous extract of Pistacia atlantica leaf (Ag NPs) and evaluation of their cytotoxicity, antioxidant, and antibacterial effects under in vitro condition. Ag NPs were spherical with a size range of 40-60 nm and characterized using various analysis techniques including UV–Vis absorption spectroscopy to determine the presence of Ag NP in the solution. We studied functional groups of Pistacia atlantica extract in the reduction and capping process of Ag NP by FT-IR, crystallinity and FCC planes by XRD pattern, elemental analysis of the sample by EDS, and surface morphology, shapes, and size of Ag NPs by SEM, AFM, and TEM. Destroy initiation and termination temperatures of the Ag NPs were determined by TGA. DPPH free radical scavenging test was done to evaluate the antioxidant potentials, which indicated similar antioxidant potentials for Ag NPs and butylated hydroxytoluene. The synthesized Ag NPs had great cell viability dose-dependently and indicated this method was nontoxic. Agar diffusion tests were done to determine the antibacterial characteristic. Ag NPs revealed similar antibacterial property to the standard antibiotic. Also, Ag NPs prevented the growth of all bacteria at 1-7 μg/ml concentrations and removed them at 3-15 μg/ml concentrations. Finally, synthesized Ag NPs revealed non-cytotoxicity, antioxidant and antibacterial activities in a dose-depended manner.     

Direct Synthesis of N-Heterocyclic Carbene-Stabilized Copper Nanoparticles from an N-Heterocyclic Carbene–Borane

N-Heterocyclic carbene (NHC)-stabilized copper nanoparticles (NPs) were synthesized from an NHC–borane adduct and mesitylcopper(I) under thermal conditions (refluxing toluene for 2.5 h). NPs with a size distribution of 11.6±1.8 nm were obtained. The interaction between Cu NPs and NHC ligands was probed by X-ray photoelectron spectroscopy, which showed covalent binding of the NHC to the surface of the NPs. Mechanistic studies suggested that NHC–borane plays two roles: contributing to the reduction of [CuMes]₂ to release Cu⁰ species and providing NHC ligands to stabilize the copper NPs.     

Hydrodynamic Characteristics and Adsorption Particularity of Nanobiological Feedstock Along the Bed Height in a Novel Chromatography Column

Expanded bed adsorption (EBA) is a practical method for the separation of nanoparticulates. In order to analysis the local hydrodynamic and adsorption behavior of nanoparticle (NP)-based biological feedstock, a modified Nano Biotechnology Group EBA column with a 26-mm inner diameter was used to withdraw liquid from different axial positions of the column. Fabricated egg albumin (EA) NPs with an average size of 70 nm were employed as a model system and viral size/charge mimic to assess the relationship between hydrodynamic and adsorption performance of NPs at the different column regions. The effects of influential factors, including flow velocity and initial concentration of NPs, on NP hydrodynamic behavior and adsorption kinetics along the bed height were investigated. NP hydrodynamic studies confirmed that non-uniform behavior dominated the system and a decreasing trend of liquid mixing/dispersion with increase of bed height was observed in this column. The results demonstrated an increase in the mixing/dispersion at certain bed heights with the increase in both the velocity and feed initial concentration. Breakthrough curves were measured at various column points to determine the adsorption performance [dynamic binding capacity (DBC) and yield] in different bed positions/zones. Yield and DBC of NPs were improved along the bed height, whereas liquid velocity had the opposite effect. Increasing the initial concentration of NPs enhanced only the DBC. Separation of EA NPs under optimal conditions was 87 %, which is an excellent result for a one-pass frontal chromatography method.

     

Close‐Packed Two‐Dimensional Silver Nanoparticle Arrays: Quadrupolar and Dipolar Surface Plasmon Resonance Coupling

Silver nanoparticles (NPs) ranging in size from 40 to 100 nm were prepared in high yield by using an improved seed‐mediated method. The homogeneous Ag NPs were used as building blocks for 2D assembled Ag NP arrays by using an oil/water interface. A close‐packed 2D array of Ag NPs was fabricated by using packing molecules (3‐mercaptopropyltrimethoxysilane) to control the interparticle spacing. The homogeneous 2D Ag NP array exhibited a strong quadrupolar cooperative plasmon mode resonance and a dipolar red‐shift relative to individual Ag NPs suspended in solution. A well‐arranged 2D Ag NP array was embedded in polydimethylsiloxane film and, with biaxial stretching to control the interparticle distance, concomitant variations of the quadrupolar and dipolar couplings were observed. As the interparticle distance increased, the intensity of the quadrupolar cooperative plasmon mode resonance decreased and dipolar coupling completely disappeared. The local electric field of the 2D Ag NP array was calculated by using finite difference time domain simulation and qualitatively showed agreement with the experimental measurements.     

Controlled UV-C light-induced fusion of thiol-passivated gold nanoparticles

Thiol-passivated gold nanoparticles (AuNPs) of a relatively small size, either decorated with chromophoric groups, such as a phthalimide (Au@PH) and benzophenone (Au@BP), or capped with octadecanethiol (Au@ODCN) have been synthesized and characterized by NMR and UV-vis spectroscopy as well as transmission electron microscopy (TEM). These NPs were irradiated in chloroform at different UV-wavelengths using either a nanosecond laser (266 and 355 nm, ca. 12 mJ/pulse, 10 ns pulse) or conventional lamps (300 nm < λ < 400 nm and ca. 240 nm < λ < 280 nm) and the new AuNPs were characterized by X-ray and UV-vis spectroscopy, as well as by TEM. Laser irradiation at 355 nm led to NP aggregation and precipitation, while the NPs were photostable under UV-A lamp illumination. Remarkably, laser excitation at 266 nm induced a fast (minutes time-scale) increase in the size of the NPs, producing huge spherical nanocrystals, while lamp-irradiation at UV-C wavelengths brought about nanonetworks of partially fused NPs with a larger diameter than the native NPs.     

SEC Characterization of Au Nanoparticles Prepared through Seed-Assisted Synthesis

In this paper we report the use of size-exclusion chromatography (SEC) for rapid determination of the sizes and size distributions of Au nanoparticles (NPs) prepared by seed-assisted synthesis. Analytical separation of Au NPs was performed in a polymer-based column of pore size 400 nm. We characterized the sizes and size distributions of the Au NPs by using 10 mM sodium dodecyl sulfate (SDS) as mobile phase and obtained a linear relationship (R ² = 0.986) between retention time and size of Au NPs within the range 9.8–79.1 nm; the relative standard deviations of these retention times were less than 0.3%. These separation conditions were used to characterize the sizes and size distributions of Au NPs prepared by seed-assisted synthesis. In addition to observing the elution times of the Au NPs we also simultaneously characterized their size-dependent optical properties by spectral measurement of the eluting peaks by use of an on-line diode-array detector (DAD), i.e., monitoring of the stability of the Au NP products. By using this approach we found the presence of SDS was beneficial in stabilizing the synthesized Au NPs. We also found that the volume of Au metal ions used affected the sizes of the final products. SEC seems an efficient tool for characterizing the sizes of NPs fabricated by seed-assisted synthesis.     

Effect of interacting nanoparticles on the ordered morphology of block copolymer/nanoparticle mixtures

We investigated the effect of hard additives, that is, magnetic nanoparticles (NPs) and metal NPs, on the ordered morphology of block copolymers by varying the NP concentration. To characterize the structural changes of a block copolymer associated with different NP loadings, small-angle X-ray scattering and transmission electron microscopy were performed. Monodisperse maghemite (γ-Fe₂O₃) NPs (7 nm in diameter) and silver (Ag) NPs (6 nm in diameter) with surfaces modified with oleic acids were synthesized, and a cylinder-forming poly(styrene-block-isoprene) diblock copolymer was used as a structure-directing matrix for the NPs. As the NP concentration increased, domains of NP aggregates were observed for both magnetic and metal NPs. In the case of mixtures of cylinder-forming poly(styrene-block-isoprene) and Ag NPs with weak particle–particle interactions, random aggregates of Ag NPs were observed, and the ordered morphology of the block copolymer lost its long-range order with an increase in the NP concentration. However, regular, latticelike aggregates obtained with γ-Fe₂O₃ NPs, because of the strong interparticle interactions, induced an intriguing morphological transformation from hexagonal cylinders to body-centered-cubic spheres via undulated cylinders, whereas the neat block copolymer did not show such a morphological transition over a wide range of temperatures. The interplay between magnetic NPs and the block copolymer was also tested with magnetic NPs of different sizes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3571–3579, 2006     

γ-Ray induced catalytic properties of the silica nanoparticles dispersed in the aerated aqueous solution

Silica nanoparticles (NPs) dispersed in an aerated aqueous solution containing Ag⁺ were irradiated to a dose of 10 kGy using ⁶⁰Co γ-rays. The typical surface plasmon band of Ag NPs was observed around 400 nm, indicating that even in the presence of dissolved oxygen the reduction of Ag⁺ occurred by silica NPs. Transmission electron microscopy images indicated that Ag NPs formed on the surface of the silica NPs. The subtraction spectra showed broad absorption around 500 nm with the absorbance depending on the dose. The electrons generated by charge separation from silica NPs with a size of about 12 nm reduce Ag⁺ to Ag⁰ and form (Ag⁰) _n species on the silica NPs, and the type of (Ag⁰) _n species formed depended on the silica NP, and Ag⁺ contents, and the dose. In the co-presence of organic molecules on the silica NP such as rhodamine, the absorbance of the surface plasmon band of both Ag NPs and rhodamine decreased, indicating the electrons to participate in the reductive decomposition of rhodamine molecules adsorbed on the silica NP. Furthermore, in the case when the silica NPs contained fluorescein molecules, the fluorescein molecules were also decomposed, indicating that the fluorescein molecules adsorbed on the inner surface of the silica NPs. The addition of I₂ as an oxidative reagent prevented the decomposition of the fluorescein molecules, indicating that electrons are the main species emitted from irradiated silica NPs.     

应用于局域表面等离激元共振扫描显微探针的球形Au@Ag纳米粒子的合成及介电敏感性检测

局域表面等离激元共振(LSPR)显微探针的检测灵敏性主要取决于针尖上修饰的纳米粒子的LSPR性质.本文采用阴离子辅助法,在水溶液中通过调节Au核与Ag⁺的物质的量之比,实现Au核上不同厚度的Ag壳层包覆,可控地一步合成均一性好、银壳层较厚(≥10 nm)的核壳比不同的球形Au@Ag纳米粒子.通过扫描电镜(SEM)、透射电镜(TEM)及扫描透射电子显微镜X射线能谱(STM-EDS)线扫描分析对不同核壳比的Au@Ag纳米粒子进行形貌组成表征,证实了所合成核壳结构的可控性.将不同核壳比的Au@Ag纳米粒子置于不同折射率溶液中进行纳米粒子介电敏感性的研究,表明7.5 nm Au@28 nm Ag的纳米结构具有最高的品质因子.同时将不同核壳比的Au@Ag纳米粒子置于不同折射率的非导电性基底上进行单颗纳米粒子散射性质的研究,结果表明7.5 nm Au@28 nm Ag纳米粒子适合作为LSPR显微探针的高检测灵敏性纳米结构之一.     

Synthesis, Structure and Growth Mechanism of Size and Shape Tunable Au/Ag Bimetallic Nanoparticles

By simply adding ascorbic acid in advance of AgNO₃, the size and shape controllable Au/Ag bimetallic nanoparticles (NP) were prepared in the traditional Au growth solution free of seed at room temperature. The size distribution of NP is well uniform with ca. 10%–15% standard deviation in diameter. By changing CTAB concentration, the size and shape of NPs are tunable. After researching the surface‐enhanced Raman spectroscopy (SERS) behavior of the prepared NPs, an enhancement factor varied from 4.3×10⁴ to 1.1×10⁵ was obtained for the NP centered at ca. (64±8) nm. Electrochemical cyclic voltammetric results revealed that the so formed nanoparticles were Au riched Au/Ag bimetallic NP, and this formation might be due to the disproportionation reaction of Au⁺ prompted by Ag⁺ and the under potential deposition process of Ag⁺ on Au.     

Engineering of UV‐absorbing polypropylene films containing poly(2‐(2′‐hydroxy‐5′‐methacryloxyethylphenyl)‐2H‐benzotriazole) nanoparticles

Ultraviolet‐absorbing nanoparticles (NPs) were prepared by emulsion co‐polymerization of the vinylic monomer 2‐(2′‐hydroxy‐5′‐methacryloxyethylphenyl)‐2H‐benzotriazole (Norbloc?, NB) with the crosslinking monomer divinylbenzene. The effect of total monomer, surfactant, crosslinker, and initiator concentrations on the size and size distribution of the formed NPs was elucidated. The NB monomer and the formed polyNB (PNB) NPs of 19 ± 2 nm were then incorporated into polypropylene (PP) films by melt‐compounding technique by using cast film extrusion. Increasing the PNB NP concentrations integrated within the PP films decreased their UV transmittance. Migration of the UV absorbing PNB NPs from the PP films was not observed during 3 years of storage at room temperature or while exposure to extreme conditions. Under the same conditions, a significant migration was observed for the NB monomer‐containing films. Overall, the PNB NP‐containing films are clear and transparent, although the haze was affected by the addition of NB and PNB NPs. Moreover, the films have good mechanical properties and UV‐blocking quality. Copyright © 2017 John Wiley & Sons, Ltd.     

Plasmon-Enhanced Electrochemiluminescence at the Single-Nanoparticle Level

Plasmon-enhanced electrochemiluminescence (ECL) at the single-nanoparticle (NP) level was investigated by ECL microscopy. The Au NPs were assembled into an ordered array, providing a high-throughput platform that can easily locate each NP in sequential characterizations. A strong dependence of ECL intensity on Au NP configurations was observed. We demonstrate for the first time that at the single-particle level, the ECL of Ru(bpy)₃²⁺-TPrA was majorly quenched by small Au NPs (<40 nm), while enhanced by large Au ones (>80 nm) due to the localized surface plasmon resonance (LSPR). Notably, the ECL intensity was further increased by the coupling effect of neighboring Au NPs. Finite Difference Time Domain (FDTD) simulations conformed well with the experimental results. This plasmon enhanced ECL microscopy for arrayed single NPs provides a reliable tool for screening electrocatalytic activity at a single particle.