Behavior of a Thermosensitive Star-Shaped Polymer with Polyethyloxazoline-<Emphasis Type="Italic">block</Emphasis>-Polyisopropyloxazoline Copolymer Arms

The aqueous solutions of the star-shaped eight-arm polymer in which arms consist of the block copolymer of poly(2-ethyl-2-oxazoline) and poly(2-isopropyl-2-oxazoline) and a more hydrophilic poly(2- ethyl-2-oxazoline) is attached to the calix[8]arene core are studied by light scattering and turbidimetry. For the sake of comparison, the linear block copolymer modeling arms of the star-shaped polymer is examined. The temperature and concentration dependences of light scattering intensity and optical transmission, the hydrodynamic radii of particles occurring in solutions, and their fraction in solution are determined. At room temperature, solutions of the linear copolymer are molecularly dispersed because of a high hydrophilicity of blocks and aggregates are formed in solutions of the star-shaped polymer as a result of interaction between hydrophobic calix[8]arene cores. As the temperature grows, the dehydration of poly(2-isopropyl-2-oxazoline) units initially occurs and entails both the compaction and aggregation of star-shaped molecules. At higher temperatures, the dehydration of poly(2-ethyl-2-oxazoline) leading to phase separation begins. The temperature of phase separation grows upon dilution. A high intramolecular density of the star-shaped polymer is responsible for a marked deceleration of self-organization processes. This effect is especially pronounced in the vicinity of the phase-separation temperature.     

Polymerization of bis(2-oxazoline) compounds with dicarboxylic acids

A side reaction was found in the reaction of a 2-oxazoline compound with a carboxylic acid. It is an oxazoline ring opening addition to an amide group formed by the main reaction. In addition, certain phosphites were found to act as catalyst for the side reaction. The rate constants of the main and side reactions in the system of 2-phenyl-2-oxazoline and n-octanoic acid were obtained through simulation of the reactions on an analog computer. The side reaction makes it impossible for a very high molecular weight polymer to form in the reaction of a bis-2-oxazoline with a dicarboxylic acid, but makes it possible for a new crosslinked polymer to form when excess bis-2-oxazoline and a dicarboxylic acid are heated in the presence of a certain phosphite.     

Effect of pendant groups on the blood compatibility and hydration states of poly(2-oxazoline)s

Poly(2-methyl-2-oxazoline) (PMeOx), poly(2-ethyl-2-oxazoline) (PEtOx), poly(2-n-butyl-2-oxazoline) (PBuOx), and poly(2-phenyl-2-oxazoline) (PPhOx) are selected as poly(2-oxazoline) (POX) models to study the effect of pendant groups on their blood compatibility and hydration states. A comprehension of this can provide a perspective for understanding the biocompatibility of PMeOx and PEtOx in water-polymer interactions and may inspire the development of novel blood-compatible POX derivatives. The aforementioned four POXs are grafted onto glass substrates via photo-grafting, and their blood compatibility is estimated via platelet adhesion and the degree of denaturation of the adsorbed fibrinogen. The hydration states of the POXs are investigated using differential scanning calorimetry and attenuated total reflection infrared spectroscopy. Intermediate water is found to be present in hydrated PMeOx and PEtOx, but is observed to be scarce in hydrated PBuOx and PPhOx. This could be the reason for the biocompatibility of PMeOx and PEtOx. The carbonyl groups in PMeOx and PEtOx can be fully hydrated. However, in PBuOx and PPhOx, water mainly exists as bulk water. The hydration of the carbonyl groups is hindered by the bulky side chains, and IW cannot be generated.     

First aldehyde-functionalized poly(2-oxazoline)s for chemoselective ligation

A protected aldehyde-functionalized 2-oxazoline, 2-[3-(1,3)-dioxolan-2-ylpropyl]-2-oxazoline (DPOx), was synthesized from commercially available compounds in high yields. The polymerization of DPOx with different initiators proceeds via a living ionic mechanism; thus, the polymers were of low polydispersity and the degree of polymerization could be precisely adjusted. Copolymerization with 2-methyl-2-oxazoline gave water-soluble statistical copolymers. Hydrolysis of the homo- and copolymers resulted in well-defined, aldehyde-bearing poly(2-oxazoline)s. The aldehyde side functions reacted quantitatively with an amino-oxy compound to form the corresponding oxime.     

Behavior of aqueous solutions of polymer star with block copolymer poly(2-ethyl-2-oxazoline) and poly(2-isopropyl-2-oxazoline) arms

Eight-arm star-shaped poly(2-alkyl-2-oxazoline) (M?≈?21,000?g?·?mol^?1) was studied by turbidimetry and light scattering in aqueous solutions within concentration ranging from 0.00038 to 0.0276?g?·?cm^?3. The arms were the block copolymers of poly(2-isopropyl-2-oxazoline) (PiPrOx) and poly(2-ethyl-2-oxazoline) (PEtOx). Calix[8]arene core was connected with poly(2-isopropyl-2-oxazoline). The behavior of investigated polymer differed from that of thermosensitive stars with poly(2-alkyl-2-oxazoline) homopolymer arms. At low temperatures, the aggregates were formed due to interaction of hydrophobic cores. The phase separation temperatures T₁ and T₂ of studied star were higher than those for star-shaped poly(2-isopropyl-2-oxazoline) and lower than for poly(2-ethyl-2-oxazoline). T₁ and T₂ increased with dilution.     

Poly(2-oxazoline)-Based Polyplexes as a PEG-Free Plasmid DNA Delivery Platform

The present study expands the versatility of cationic poly(2-oxazoline) (POx) copolymers as a polyethylene glycol (PEG)-free platform for gene delivery to immune cells, such as monocytes and macrophages. Several block copolymers are developed by varying nonionic hydrophilic blocks (poly(2-methyl-2-oxazoline) (pMeOx) or poly(2-ethyl-2-oxazoline) (pEtOx), cationic blocks, and an optional hydrophobic block (poly(2-isopropyl-2-oxazoline) (iPrOx). The cationic blocks are produced by side chain modification of 2-methoxy-carboxyethyl-2-oxazoline (MestOx) block precursor with diethylenetriamine (DET) or tris(2-aminoethyl)amine (TREN). For the attachment of a targeting ligand, mannose, azide-alkyne cycloaddition click chemistry methods are employed. Of the two cationic side chains, polyplexes made with DET-containing copolymers transfect macrophages significantly better than those made with TREN-based copolymer. Likewise, nontargeted pEtOx-based diblock copolymer is more active in cell transfection than pMeOx-based copolymer. The triblock copolymer with hydrophobic block iPrOx performs poorly compared to the diblock copolymer which lacks this additional block. Surprisingly, attachment of a mannose ligand to either copolymer is inhibitory for transfection. Despite similarities in size and design, mannosylated polyplexes result in lower cell internalization compared to nonmannosylated polyplexes. Thus, PEG-free, nontargeted DET-, and pEtOx-based diblock copolymer outperforms other studied structures in the transfection of macrophages and displays transfection levels comparable to GeneJuice, a commercial nonlipid transfection reagent.     

Thermal degradation behaviour and kinetic parameters of copolymers obtained by copolymerization via zwitterion

The thermal degradation of a series of 18 copolymers corresponding to poly(p-methoxy-phenylmaleimide-co-2-methyl-2-oxazoline), poly(p-methoxyphenylmaleimide-co-2-ethyl-2-oxazoline), poly(p-nitrophenylmaleimide-co-2-methyl-2-oxazoline) and poly(p-nitrophenyl-maleimide-co-2-ethyl-2-oxazoline) has been invesugated using thermogravimetry in the temperature range 20–500 ° C. All the copolymers degrade in one step. The kinetic parameters E_a, n and A have been calculated. The thermal stability depends on the copolymer composition.     

SYNTHESIS AND CHARACTERIZATION OF WATER-SOLUBLE BLOCK COPOLYMERS WITH AN END-TAGGED NAPHTHALENE PROBE

Water-soluble A-B block copolymers of 2-perfluoroethyl-2-oxazoline or 2-pentyl-2-oxazoline as hydrophobic monomers and 2-methyl-2-oxazoline as hydrophilic monomer were prepared by means of the living cationic ring-opening polymerization. The polymerization was initiated with N-methyl-2-(1-naphthyl)-2-oxazolinium trifluoromethanesulfonate as fluorescence label followed by sequential addition of the hydrophobic and the hydrophilic monomer. The polymerization was monitored by ¹H NMR spectroscopy and gel permeation chromatography (GPC) measurements. The results revealed that fluorophilic block copolymers can be prepared by this method while lipohilic block copolymers are not accessible by this monomer sequence. Micelle formation of the fluorophilic block copolymers in aqueous solution was studied by means of steady-state fluorescence spectroscopy which confirmed strong intermolecular excimer formation of the terminal bounded naphthalene moiety. In chloroform as a good solvent for both blocks, only monomer fluorescence could be observed.     

Some linear and branched macromolecules by ring-opening polymerization

In the first part the ring-opening polymerization of some macrocyclic ether-acetals is briefly described. Of special interest are acetal polymers with functional groups, for instance C=C-double bonds. Appropriate unsaturated monomers and their polymerizability are discussed. The second part deals with the polymerization of oxazolines, substituted in 2- and/or 4-position. Branched polymers are obtained by copolymerization of 2-ethyl-2-oxazoline with 2-hexyl-2-oxazoline or 2-undecyl-2-oxazoline. The properties of the random copolymers and corresponding block copolymers are compared. By a “mixed mechanism technique” a block copolymer composed of a poly(tert -butyl methacrylate) block and a poly(phenyloxazoline) block was prepared. A new initiator system for the polymerization of oxazolines using alkyl chloroformates is introduced. The chloroformate of a trifunctional alcohol led to a three-arm star polymer. Telechelics with two chloroformate endgroups form ABA type block copolymers. Finally four chiral oxazolines are described and the influence of substitution in dioxolanes and oxazolines on the polymerizability is discussed.     

Effect of end group polarity upon the lower critical solution temperature of poly(2-isopropyl-2-oxazoline)

Thermo-sensitive poly(2-isopropyl-2-oxazoline)s (PiPrOx) were functionalized with end groups of different polarity by living cationic ring-opening polymerization using the initiator and/or termination method as well as sequential block copolymerization with 2-methyl-2-oxazoline. As end groups, methyl, n-nonyl, piperidine, piperazine as well as oligo(ethylenglygol) and oligo(2-methyl-2-oxazoline) were introduced quantitatively. The lower critical solution temperature (LCST) of the aqueous solutions was investigated. The introduction of hydrophobic end groups decreases the LCST, while hydrophilic polymer tails raise the cloud point. In comparison to poly(N-isopropyl acrylamide), the impact of the end group polarity upon the modulation of the LCST was found to be significantly stronger. Surprisingly, terminal oligoethylenegycol units also decrease the LCST of PiPrOx, thus acting as moieties of higher hydrophobicity as compared to the poly(2-oxazoline) main chain. Together with the possible variation of the side group polarity, this allows a broad modulation of the LCST of poly(2-oxazoline)s.     

Lipopolymers from new 2-substituted-2-oxazolines for artificial cell membrane constructs

We present the synthesis of novel 2-oxazoline monomers with different 2-substituents and their consecutive conversion into lipopolymers by living cationic polymerization. The side functions of these monomers were varied to realize different steric needs and hydrogen bonding interactions of the polymer side chains. 2-(2'-N-pyrrolidonyl-ethyl)-2-oxazoline, 2-(3'-methoxymonoethyleneglycol)propyl-2-oxazoline, and 2-(3'-methoxytriethyleneglycol)propyl-2-oxazoline were synthesized. All of the monomers could be converted into the corresponding lipopolymers by living cationic polymerization using 2,3-di-O-octadecyl-1-trifluormethansulfonyl-sn-glycerol as the initiator. The characterization of the 2,3-di-O-octadecyl-glycerol-poly(2-oxazoline) lipopolymers by NMR spectroscopy, IR spectroscopy, and gel permeation chromatography revealed that the targeted molar masses and compositions can be controlled by the initial initiator/monomer ([M](0)/[I](0)) ratio for all the synthesized lipopolymers. The polydispersities were found to be narrow (polydispersity indices from 1.06-1.3). The amphiphilic lipopolymers were spread at the air-water interface (Langmuir-Blodgett film balance) and the effect of the polymer side groups and chain lengths upon the Pi-area (A) isotherms of the corresponding lipopolymer monolayers were compared and analyzed. The impact of the polymer side functionalities on a 2D gel formation was examined using an interfacial rheometer operated in an oscillating stress-strain mode. Interestingly enough, none of the newly synthesized lipopolymers showed a rheological transition. This somewhat surprising result not only verified that these 2D gels are not established by hydrogen bonding among hydrophilic polymer moieties, as earlier proposed, but also supported the concept of jammed surface micelles as the more likely origin for the gelation phenomenon. [Diagram: see text]     

Synthesis and characterization of diblock copolymer of butadiene and 2-ethyl-2-oxazoline

Ｂｌｏｃｋｃｏｐｏｌｙｍｅｒｓａｓｉｄｅａｌｃｏｍｐａｔｉｂｉｌｉｚｅｒｓｈａｖｅｆｏｕｎｄｗｉｄｅａｐｐｌｉｃａｔｉｏｎｓｉｎｐｏｌｙｍｅｒｂｌｅｎｄｓ.Ｆｏｒｂｌｏｃｋｃｏｐｏｌｙｍｅｒｓｃｏｎｔａｉｎｉｎｇｐｏｌａｒｂｌｏｃｋｓ,ｉｔｓａｄｄｉｔｉｏｎｔｏａｂｌｅｎｄｃｏｎｔａｉｎｉｎｇｐｏｌａｒｃｏｍｐｏｎｅｎｔｓｌｅａｄｓｔｏｔｈｅｄｅｃｒｅａｓｅｉｎｉｎｔｅｒｆａｃｉａｌｔｅｎｓｉｏｎｂｅｔｗｅｅｎｔｈｅｉｍｍｉｓｃｉｂｌｅｐｈａｓｅｓｏｆｔｈｅｂｌｅｎｄ,ｔｈｅｉｎｃｒｅａｓｅｉｎｃ…     

Alkyl nitrate nitration of active methylene compounds. Nitration of 2-substituted 2-oxazolines

2-Alkyl- and 2-aralkyl-2-oxazolines are readily converted to the corresponding α-nitroalkyl- and α-nitroaralkyl-2-oxazolines on treatment with an alkali metal amide such as potassium or sodium amide in liquid ammonia or with lithium diisopropylamide (LDA) in THF and an alkyl nitrate. Tertiary nitro compounds, such as 2-(2-nitro-2-propyl)-4,4-dimethyl-2-oxazoline ( 16 ) and 2-(diphenylnitromethyl)-4,4-dimethyl-2-oxazoline ( 17 ) are obtained in good yield when the anions of 2-(2-propyl)-4,4-dimethyl-2-oxazoline ( 14 ) and of 2-(diphenylmethyl)-4,4-dimethyl-2-oxazoline ( 23 ), generated by LDA are added to the nitrate in THF (inverse addition). The spectral data of the primary and secondary α-nitroalkyl- and α-nitroaralkyl-2-oxazolines reveal that they exist mostly in their dipolar structure. These compounds are readily converted to the corresponding α-halonitro-2-oxazolines on treatment with potassium hypobromite or hypochlorite.     

5,5-Dimethyl-2-phenylamino-2-oxazoline as an effective chiral auxiliary for asymmetric alkylations

The novel chiral auxiliaries, 5,5-diphenyl-2-phenylamino-2-oxazoline and 5,5-dimethyl-2-phenylamino-2-oxazoline, were prepared from l-valine methyl ester. The 5,5-dimethyl compound was shown to be a particularly effective chiral auxiliary for asymmetric alkylation affording high yields and diastereoselectivities.     

Oxazoline-based antimicrobial oligomers: synthesis by CROP using supercritical CO2

A method using supercritical CO(2) to obtain biocompatible 2-oxazoline-based oligomers quaternized with different amines is described. The synthesized oligo(2-oxazoline)s display partial carbamic-acid insertion at one end. The syntheses of quaternary oligo(2-bisoxazoline)s and linear oligoethylenimine hydrochlorides are reported. Oligo(2-methyl-2-oxazoline) and oligo(2-bisoxazoline) quaternized with N,N-dimethyldodecylamine are the most efficient biocidal agents showing fast killing rates against Staphylococcus aureus and Escherichia coli. Linear oligoethylenimine hydrochloride shows the lowest MIC values but higher killing times against both bacteria. Based on the antimicrobial activity studies, a cooperative action of carbamic acid with the ammonium end group is proposed.     

Synthesis and characterization of liquid crystalline poly(N-acylethyleneimine)s

The synthesis of three cyclic imino ethers containing mesogenic groups attached to the heterocyclic unit through flexible spacers is described. Cationic ring-opening isomerization polymerization of two of them, i.e., 2-[4-(4-methoxy-4′-biphenyloxy)butyl]-2-oxazoline (MeOBiph-4-Oxz) and 2-[6-(4-methoxy-4′-biphenyloxy)hexyl]-2-oxazoline (MeOBiPh-6-Oxz) provided thermotropic liquid crystalline (LC) poly(N-acylethyleneimine)s, whereas the polymerization of 2-[4-(4-phenylphenoxy)butyl]-2-oxazoline (BiPh-4-Oxz) led to a crystalline polymer.     

Syntheses and crosslinking reactions of self-curable copolymers containing pendant cyclic iminoethers and carboxylic acid groups

Soluble copolymers containing both pendant cyclic iminoethers such as 4,4-dimethyl-2-oxazoline or 4,4,6-trimethyl-4H-dihydro-1,3-oxazine and carboxylic acid were successfully synthesized by radical copolymerizations of 4,4-dimethyl-2-vinyl-2-oxazoline, 4,4-dimethyl-2-isopropenyl-2-oxazoline, or 4,4,6-trimethyl-2-vinyl-4H-dihydro-1,3-oxazine with methacrylic acid and styrene, methyl methacrylate, or ethyl acrylate using AIBN as an initiator in benzene or DMF at 60 or 80°C. The crosslinking reaction of the copolymers obtained did not occur by heating at 70°C. However, these copolymers quantitatively produced gel products by heating at 130°C. The rate of crosslinking reaction of the copolymer increased with increasing pendant cyclic iminoether and carboxylic acid groups. The rate of crosslinking was also affected by the molecular motion of the polymer chain. Our results show that the copolymers of more sterically hindered 2-vinyl-2-oxazolines are more stable and so they can be crosslinked in a controlled manner and at higher temperatures than the previously studied polyoxaziline system.     

New chitin-based polymer hybrids, 1. Miscibility of poly(vinyl alcohol) with chitin derivatives

As a new class of biopolymer-based hybrid materials, the present paper describes the binary blends of a modified chitin and poly(vinyl alcohol) (PVA) which are miscible in the whole range of compositions. The blend films were prepared by the solvent cast method from a homogeneous aqueous solution of PVA and a chitin derivative having poly(2-methyl-2-oxazoline) side chains. Miscibility between PVA and poly(2-methyl-2-oxazoline) homopolymer was also revealed. Differential scanning calorimetry and FT-IR analyses were used to investigate the blends.     

Bis-macromonomers of 2-alkyl-2-oxazolines–synthesis and polymerization

Poly(2-alkyl-2-oxazoline)s having an acrylate group at both chain ends were synthesized by terminating living bifunctional poly(2-methyl-2-oxazoline) or poly(2-ethyl-2-oxazoline) with acrylic acid. These macromonomers have been polymerized to the corresponding polyoxazoline networks. Thermal as well as UV-initiated free radical polymerization were applied and the influence of the polymerization conditions and molecular weight of the prepolymer used on the properties of the networks were investigated. Both methods of polymerization produced high fractions of soluble material, probably due to the low concentration of the acrylate end groups.     

Reversible Photoswitching in Poly(2-oxazoline) Nanoreactors

This contribution reports light responsive catalytic nanoreactors based on poly(2-oxazoline) diblock copolymers. The hydrophobic block of the copolymer is a random copolymer consisting of a spiropyran functionalized 2-oxazoline (SPOx) and 2-(but-3-yn-1-yl)-4,5-dihydrooxazole (ButynOx), while the hydrophilic block is based on 2-methyl-2-oxazoline (MeOx). The block copolymer is terminated with tris(2-aminoethyl) amine (TREN) that serves as catalyst in a Knoevenagel condensation. Four block copolymers with different ButynOx/SPOx and hydrophilic/hydrophobic ratios are synthesized and self-assembled through solvent exchange. Micelles and vesicles of various sizes are observed by TEM, which undergo morphological and size changes in response to irradiation with UV light. We hypothesize that these transformations in the nanostructures are caused by increases in the hydrophilicity of the hydrophobic block when spiropyran (SP) isomerizes to merocyanine (MC) in the presence of UV light. The reversible transition from micellar to vesicular nanoreactors resulted in increased reaction kinetics through improved substrate accessibility to the catalytic site, or termination of the catalytic reaction due to polymer precipitation. These nanoreactors present a promising platform towards photoregulating reaction outcomes based on changes in nanostructure morphology.