Effect of swift heavy ion irradiation on photoluminescence properties of ZnO/PMMA nanocomposite films

We report a study on the SHI induced modifications on structural and optical properties of ZnO/PMMA nanocomposite films. The ZnO nanoparticles were synthesized by the chemical route using 2-mercaptoethanol as a capping agent. The structure of ZnO nanoparticles was confirmed by XRD, SEM and TEM. These ZnO nanoparticles were dispersed in the PMMA matrix to form ZnO/PMMA nanocomposite films by the solution cast method. These ZnO/PMMA nanocomposite films were then irradiated by swift heavy ion irradiation (Ni⁸⁺ ion beam, 100 MeV) at a fluence of 1×10¹¹ ions/cm². The nanocomposite films were then characterized by XRD, UV-vis absorption spectroscopy and photoluminescence spectroscopy. As revealed from the absorption spectra, absorption edge is not changed by the irradiation but the optical absorption is increased. Enhanced green luminescence at about 527 nm and a less intense blue emission peak around 460 nm were observed after irradiation with respect to the pristine ZnO/PMMA nanocomposite film.     

Optical properties of sol-gel fabricated Mn/SiO2 nanocomposites: Observation of surface plasmon resonance in Mn nanoparticles

Manganese nanoparticles were grown in silica glass and silica film on silicon substrate by annealing of the sol-gel prepared porous silicate matrices doped with manganese nitrate. Annealing of doped porous silicate matrices was performed at various conditions that allowed to obtain the nanocomposite glasses with various content of metallic Mn. TEM of Mn/SiO₂ glass indicates the bimodal size distribution of Mn nanoparticles with mean sizes of 10.5 nm and 21 nm. The absorption and photoluminescence spectra of Mn/SiO₂ glasses were measured. In the absorption spectra at 300 nm (4.13 eV) we observed the band attributed to the surface plasmon resonance in Mn nanoparticles. The spectra proved the creation of Mn²⁺ and Mn³⁺ ions in silica glass as well. The absorption spectra of Mn/SiO₂ glasses annealed in air prove the creation of manganese oxide Mn₂O₃. The measured reflection spectra of Mn/SiO₂ film manifest at 240-310 nm the peculiarity attributed to surface plasmons in Mn nanoparticles.     

Strong green luminescence of Ni2+-doped ZnS nanocrystals

ZnS nanoparticles doped with Ni²⁺ have been obtained by chemical co-precipitation from homogeneous solutions of zinc and nickel salt compounds, with S^2- as precipitating anion, formed by decomposition of thioacetamide (TAA). The average size of particles doped with different mole ratios, estimated from the Debye–Scherrer formula, is about 2–2.5 nm. The nanoparticles could be doped with nickel during synthesis without altering the X-ray diffraction pattern. A Hitachi M-850 fluorescence spectrophotometer reveals the emission spectra of samples. The absorption spectra show that the excitation spectra of Ni-doped ZnS nanocrystallites are almost the same as those of pure ZnS nanocrystallites (λ_ex=308–310 nm). Because a Ni²⁺ luminescent center is formed in ZnS nanocrystallites, the photoluminescence intensity increases with the amount of ZnS nanoparticles doped with Ni²⁺. Stronger and stable green-light emission (520 nm) (its intensity is about two times that of pure ZnS nanoparticles) has been observed from ZnS nanoparticles doped with Ni²⁺. Received: 18 December 2000 / Accepted: 17 March 2001 / Published online: 20 June 2001     

Synthesis and photoluminescent properties of ZnS:Cd nanoparticles and their phase-transferred nanocomposite with polyvinylpyrrolidone

ZnS:Cd nanoparticles were synthesized in a reverse micelle system by controlling reaction factors with mercaptoacetic acid (MPA) as a surfactant and N,N-dimethylformamide as an oil phase. X-ray diffraction pattern shows that the ZnS:Cd nanoparticles exhibit a cubic structure and its mean size is calculated around 4 nm. With different molar ratios of Zn²⁺/S^2?, the relative intensity of the emission peaks at 400 and 556 nm changes dramatically due to the more sulfur vacancies which resulted from the imbalance of Zn²⁺ and S²⁺ ions. Furthermore, hydrophobic phase-transferred ZnS:Cd nanoparticles were obtained using octylamine, and a highly luminescent phase-transferred ZnS:Cd/polyvinylpyrrolidone (PVP) nanocomposite was prepared by blending the phase-transferred ZnS:Cd with PVP. Infrared absorption suggests that octylamine has been successfully connected with the MPA-coated ZnS:Cd nanoparticles. Unlike the MPA-coated ZnS:Cd which has a very strong emission at 556 nm, the phase-transferred ZnS:Cd has a strong emission at 435 nm, which is ascribed to surface passivation and electron redistribution. In addition, luminescent intensity enhancement was observed for the phase-transferred ZnS:Cd/PVP nanocomposites with various Cd²⁺ doping concentrations.     

The influence of intrinsic and surface states on the emission properties of colloidal nanocrystals

Time Resolved Photoluminescence (TRPL) measurements on the picosecond time scale (temporal resolution of 17 ps) on colloidal CdSe and CdSe/ZnS Quantum Dots (QDs) were performed, to elucidate the role of intrinsic and surface states on the emission process. Transient PL spectra reveal three emission peaks with different lifetimes (60 ps, 460 ps and 9–10 ns, from the bluest to the reddest peak). The energy separations among the states, together with their characteristic decay times, allow us to attribute the two higher energy peaks to ±1^U and ±1^L bright states of the fine structure picture of spherical CdSe QDs, and the third one to surface states emission, respectively. We show that the contribution of surface emission to the PL results to be different for the two samples studied (67% in the CdSe QDs and 32% in CdSe/ZnS QDs), confirming the decisive role of the ZnS shell in the improvement of the surface passivation.     

Specific features of luminescence quenching in a nematic liquid crystal doped with nanoparticles

The change in the intensity of the photoluminescence (PL) spectra of nematic liquid crystal (NLC) composites as a function of the concentration of CdSe/ZnS semiconductor quantum dots (QDs) and TiO₂ and ZrO₂ nanoparticles ~5 nm in diameter has been investigated. It is shown that the PL-quenching intensity in composites with CdSe/ZnS QDs exceeds that in composites with TiO₂ and ZrO₂ nanoparticles. The lowfrequency spectra of these composites with a concentration of 0.1 wt %, recorded in the range of 10²–10³ Hz, and the content of mobile ions in them have been investigated. It is found that the dielectric loss in the composite with CdSe/ZnS QDs is much higher and the content of mobile ions is larger by a factor of 3 than in the composites with TiO₂ and ZrO₂ nanoparticles. It is shown that an increase in the CdSe/ZnS QD concentration in NLC composites leads to an increase in the dielectric loss and a decrease in the PL intensity. Possible mechanisms of the interaction between NLC molecules and CdSe/ZnS QDs are discussed.     

Time-Resolved Fluorescence Spectroscopy Study on the Photophysical Behavior of Quantum Dots

Room-temperature time-resolved luminescence measurements on single CdSe/ZnS quantum dots (QDs) are presented. Fluorescence emission spectra were recorded over periods of up to 30 minutes with a time resolution as small as 6 ms. For QDs in ambient air, a clear 30–40 nm blue shift in the emission wavelength is observed, before the luminescence stops after about 2–3 minutes because of photobleaching. In a nitrogen atmosphere, the blue shift is absent while photobleaching occurs after much longer times (i.e., 10–15 minutes). These observations are explained by photoinduced oxidation. The CdSe surface is oxidized during illumination in the presence of oxygen. This effectively results in shrinkage of the CdSe core diameter by almost 1 nm and consequently in a blue shift. The faster fading of the luminescence in air suggests that photoinduced oxidation results in the formation of non-radiative recombination centers at the CdSe/CdSeO_x interface. In a nitrogen atmosphere, photoinduced oxidation is prevented by the absence of oxygen. Additionally, a higher initial light output for CdSe/ZnS QDs in air is observed. This can be explained by a fast reduction of the lifetime of the long-lived defect states of CdSe QDs by oxygen.     

The optical properties and energy transition process in nanocomposite of polyvinyl-pyrrolidone polymer and Mn-doped ZnS

This study has been carried out on the optical properties of polyvinyl-pyrrolidone (PVP), the energy transition process in nanocomposite of PVP capped ZnS:Mn nanocrystalline and the influence of the PVP concentration on the optical properties of the PVP capped ZnS:Mn nanocrystalline thin films synthesized by the wet chemical method. The microstructures of the samples were investigated by X-ray diffraction, the atomic absorption spectroscopy, and transmission electron microscopy. The results showed that the prepared samples belonged to the sphalerite structure with the average particle size of about 2–3 nm. The optical properties of samples are studied by measuring absorption, photoluminescence (PL) spectra and time-resolved PL spectra in the wavelength range from 200 to 700 nm at 300 K. From data of the absorption spectra, the absorption edge of PVP polymer was found about of 230 nm. The absorption edge of PVP capped ZnS:Mn nanoparticles shifted from 322 to 305 nm when the PVP concentration increases. The luminescence spectra of PVP showed a blue emission with peak maximum at 394 nm. The luminescence spectra of ZnS:Mn–PVP exhibits a blue emission with peak maximum at 437 nm and an orange–yellow emission of ion Mn²⁺ with peak maximum at 600 nm. While the PVP coating did not affect the microstructure of ZnS:Mn nanomaterial, the PL spectra of the PVP capped ZnS:Mn samples were found to be affected strongly by the PVP concentration.     

Bactericidal effects of Ag nanoparticles immobilized on surface of SiO2 thin film with high concentration

Bactericidal activity of high concentration Ag nanoparticles immobilized on surface of an aqueous sol–gel silica thin film was investigated against Escherichia coli and Staphylococcus aureus bacteria. Size of the surface nanoparticles was estimated in the range of 35–80 nm by using atomic force microscopy. Due to accumulation of the silver nanoparticles at near the surface (at depth of 6 nm and about 40 times greater than the silver concentration in the sol), the synthesized Ag–SiO₂ thin film (with area of 10 mm²) presented strong antibacterial activities against E. coli and S. aureus bacteria with relative rate of reduction of the viable bacteria of 1.05 and 0.73 h⁻¹ for initial concentration of about 10⁵ cfu/ml, respectively. In addition, the dominant mechanism of silver release in long times was determined based on water diffusion in surface pores of the silica film, unlike the usual diffusion of water on the surface of silver-based bulk materials. Therefore, the Ag nanoparticles embedded near the surface of the SiO₂ thin film can be utilized in various antibacterial applications with a strong and long life activity.     

Two and four photon absorption and nonlinear refraction in undoped,chromium doped and copper doped ZnS quantum dots

The ZnS quantum dots (QDs) with Cr and Cu doping were synthesized by chemical co-precipitation method. The nanostructures of the prepared undoped and doped ZnS QDs were characterized by UV–vis spectroscopy, Transmission electron microscopy (TEM) and X-ray diffraction (XRD). The sizes of QDs were found to be within 3–5 nm range. The nonlinear parameters viz. Two photon absorption coefficient (β₂), nonlinear refractive index (n₂), third order nonlinear susceptibility (χ³) at wavelength 532 nm and Four photon absorption coefficient (β₄) at wavelength 1064 nm have been calculated by Z-scan technique using nanosecond Nd:YAG laser in undoped, Cr doped and Cu doped ZnS QDs. Higher values of nonlinear parameters for doped ZnS infer that they are potential material for the development of photonics devices and sensor protection applications.     

Synthesis and photoluminescence characteristics of doped ZnS nanoparticles

Free-standing powders of doped ZnS nanoparticles have been synthesized by using a chemical co-precipitation of Zn²⁺, Mn²⁺, Cu²⁺ and Cd²⁺ with sulfur ions in aqueous solution. X-ray diffraction analysis shows that the diameter of the particles is ∼2–3 nm. The unique luminescence properties, such as the strength (its intensity is about 12 times that of ZnS nanoparticles) and stability of the visible-light emission, were observed from ZnS nanoparticles co-doped with Cu²⁺ and Mn²⁺. The nanoparticles could be doped with copper and manganese during the synthesis without altering the X-ray diffraction pattern. However, doping shifts the luminescence to 520–540 nm in the case of co-doping with Cu²⁺ and Mn²⁺. Doping also results in a blue shift on the excitation wavelength. In Cd²⁺-doped ZnS nanometer-scale particles, the fluorescence spectra show a red shift in the emission wavelength (ranging from 450 nm to 620 nm). Also a relatively broad emission (ranging from blue to yellow) has been observed. The results strongly suggest that doped ZnS nanocrystals, especially two kinds of transition metal-activated ZnS nanoparticles, form a new class of luminescent materials. Received: 16 October 2000 / Accepted: 17 October 2000 / Published online: 23 May 2001     

Structural and optical properties of In0.5Ga0.5As/GaAs quantum dots in an In0.1Ga0.9As well using repeated depositions of InAs/GaAs short-period superlattices for the application of optical communication

We report structural and optical properties of In_0.5Ga_0.5As/GaAs quantum dots (QDs) in a 100 Å-thick In_0.1Ga_0.9As well grown by repeated depositions of InAs/GaAs short-period superlattices with atomic force microscope, transmission electron microscope (TEM) and photoluminescence (PL) measurement. The QDs in an InGaAs well grown at 510 °C were studied as a function of n repeated deposition of 1 monolayer thick InAs and 1 monolayer thick GaAs for n=5–10. The heights, widths and densities of dots are in the range of 6–22.0 nm, 40–85 nm, and 1.6–1.1×10¹⁰/cm², respectively, as n changes from 5 to 10 with strong alignment along [1 −1 0] direction. Flat and pan-cake-like shape of the QDs in a well is found in TEM images. The bottoms of the QDs are located lower than the center of the InGaAs well. This reveals that there was intermixing—interdiffusion—of group III materials between the InGaAs QD and the InGaAs well during growth. All reported dots show strong 300 K-PL spectrum, and 1.276 μm (FWHM: 32.3 meV) of 300 K-PL peak was obtained in case of 7 periods of the QDs in a well, which is useful for the application to optical communications.     

Synthesis and photoluminescent and nonlinear optical properties of manganese doped ZnS nanoparticles

In this work we synthesized ZnS:Mn²⁺ nanoparticles by chemical method using PVP (polyvinylpyrrolidone) as a capping agent in aqueous solution. The structure and optical properties of the resultant product were characterized using UV-vis optical spectroscopy, X-ray diffraction (XRD), photoluminescence (PL) and z-scan techniques. UV-vis spectra for all samples showed an excitonic peak at around 292 nm, indicating that concentration of Mn²⁺ ions does not alter the band gap of nanoparticles. XRD patterns showed that the ZnS:Mn²⁺ nanoparticles have zinc blende structure with the average crystalline sizes of about 2 nm. The room temperature photoluminescence (PL) spectrum of ZnS:Mn²⁺ exhibited an orange-red emission at 594 nm due to the ⁴T₁-⁶A₁ transition in Mn²⁺. The PL intensity increased with increase in the Mn²⁺ ion concentration. The second-order nonlinear optical properties of nanoparticles were studied using a continuous-wave (CW) He-Ne laser by z-scan technique. The nonlinear refractive indices of nanoparticles were in the order of 10⁻⁸ cm²/W with negative sign and the nonlinear absorption indices of these nanoparticles were obtained to be about 10⁻³ cm/W with positive sign.     

Synthesis of Cr2O3/TNTs nanocomposite and its photocatalytic hydrogen generation under visible light irradiation

A novel Cr₂O₃/TNTs nanocomposite was prepared by loaded suitable amount of amorphous Cr₂O₃ on titanate nanotubes (TNTs) via hydrothermal reaction and impregnation process. XRD, SEM and TEM results demonstrated that the amorphous Cr₂O₃ nanoparticles were homogeneously dispersed on the surface of TNTs. The diffuse reflectance UV–visible absorption spectra exhibited that the spectral response of TNTs was extended to visible light region by coupled with Cr₂O₃. The 2.5Cr₂O₃/TNTs nanocomposite showed the highest activity of hydrogen generation by photocatalytic water-splitting under visible light irradiation (λ > 400 nm). The high activity of H₂ evolution for Cr₂O₃/TNTs nanocomposites was associated with the donor level in the forbidden band of TNTs semiconductor provided by dopant Cr³⁺ and a probably photocatalytic mechanism was proposed.     

Preparation and photoluminescent properties of doped nanoparticles of ZnS by solid-state reaction

Nanometer-sized Eu³⁺-doped ZnS and Mn²⁺-doped ZnS particles were prepared by solid-state method at low temperature. The structures and properties of those materials were characterized by X-ray diffraction (XRD) and photoluminescent spectroscopy techniques. The XRD patterns reveal that the doped ZnS nanoparticles belong to zinc-blende structure. The concentration of doping ions has little effect on the sizes of the doped ZnS nanoparticles, which mainly depends on the temperature of preparation. The emission peaks from the ⁵D₀→⁷F_J (J=1, 2, and 4) electronic energy transitions of Eu³⁺ were observed in the emission spectra of the ZnS:Eu³⁺ nanoparticles. The intensity ratio of the two peaks from the ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transitions indicates that more Eu³⁺ ions occupy the sites with no inversion symmetry. For the ZnS:Mn²⁺ nanoparticles, an orange emission from the ⁴T₁→⁶A₁ transition of Mn²⁺ is present, indicating that the doping ions occupy the positions of the ZnS lattices. Meanwhile, UV-induced luminescence enhancement was observed for the ZnS:Mn²⁺ nanoparticles, the possible reason of which is discussed primarily.     

2018年2期电子期刊

光诱导功能退化是胶体量子点在应用中面临的主要挑战之一,本文针对这一问题研究了使用磁控溅射沉积SiO₂薄膜形成钝化层来提高CdSe/ZnS量子点发光稳定性的方法。首先,通过三正辛基膦辅助连续离子层吸附反应方法合成了615 nm发光的红色CdSe/ZnS量子点。然后将量子点旋涂在SiO₂/Si基片上,再通过磁控溅射方法在量子点上沉积了厚度为20 nm的SiO₂薄膜作为钝化层。使用连续波激光光源分别在空气气氛和真空条件下照射样品,研究了经过不同照射时间后钝化和未钝化量子点的稳态光致发光光谱。结果表明,随着照射时间的延长,没有SiO₂钝化的量子点的PL强度显著降低、PL峰值发生蓝移、FWHM不断增大。对比研究发现,由于SiO₂薄膜能够阻挡空气中的水和氧,减缓了量子点表面的光诱导氧化现象,因此显著提高了CdSe/ZnS量子点的稳定性。     

Charge Exchange of the Centers in Electron–Irradiated Zinc Selenide

The optical absorption induced by the photosensitive centers formed upon electron irradiation (E = 5 MeV, = 1.7·10¹⁸ cm^–2) of polycrystalline ZnSe has been studied. A comparison of the optical properties of the irradiated crystals with the known data for ZnS has allowed the assumption that the 496–, 563–, and 652–nm bands in ZnSe are associated with the anion vacancies being in different charge states. The ratio between the concentrations of the optical absorption centers in the crystals photoexcited at 80 K is determined by the electron traps participating in the processes of charge exchange of the vacancies.     

The Dynamic Resistance of CdS/CdSe/ZnS Co-Sensitized TiO2 Solar Cells

Quantum dots' sensitized solar cells (QDSSCs) can create the high-performance and low-cost photovoltaic in the future. In this study, we synthesized the film of TiO₂/CdS/CdSe/ZnS photoanodes by successive ionic layer adsorption reaction (SILAR) method. The absorption spectra, photoluminescent spectra and electrochemical impedance spectra (EIS) of the film TiO₂/CdS/CdSe/ZnS photoanodes show that the structure of energy levels in the conduction band (CB) of photoanode materials CdS, CdSe, and ZnS quantum dots (QDs) can absorb a great number of photons in each region and inject stimulated electrons quickly into the conduction band (CB) of TiO₂. Furthermore, we also studied the influence of the SILAR cycles on the dynamic resistance, the lifetime of electrons in QDSSCs through Nyquist and Bode.     

Photoluminescence characteristics of ZnS nanocrystallites doped with Ti3+and Ti4+

Direct synthesis of ZnS nanocrystallites doped with Ti³⁺ or Ti⁴⁺ by precipitation has led to novel photoluminescence properties. Detailed X-ray diffraction (XRD), fluorescence spectrophotometry, UV–vis spectrophotometry and X-ray photoelectron spectroscopy (XPS) analysis reveal the crystal lattice structure, average size, emission spectra, absorption spectra and composition. The average crystallite size doped with different mole ratios, estimated from the Debye–Scherrer formula, is about 2.6±0.2 nm. The nanoparticles can be doped with Ti³⁺ and Ti⁴⁺ during the synthesis without the X-ray diffraction pattern being altered. The strong and stable visible-light emission has been observed from ZnS nanocrystallites doped with Ti³⁺ (its maximum fluorescence intensity is about twice that of undoped ZnS nanoparticles). However, the fluorescence intensity of the ZnS nanocrystallites doped with Ti⁴⁺ is almost the same as that of the undoped ZnS nanoparticles. The emission peak of the undoped sample is at 440–450 nm. The emission spectrum of the doped sample consists of two emission peaks, one at 420–430 nm and the other at 510 nm. Received: 27 April 2001 / Accepted: 16 August 2001 / Published online: 17 October 2001     

Surfactant assisted surface studies of zinc sulfide nanoparticles

We report a simple soft chemical method for the synthesis of ZnS nanoparticles using varying concentration of cationic surfactant CTAB and examine its surface properties. Powder X-ray diffraction, UV-vis spectroscopy, photoluminescence spectroscopy, selective area electron diffraction, and transmission electron microscopy are used to characterize the as prepared ZnS nanoparticles. XRD and TEM measurements show the size of polydispersed ZnS nanoparticles is in the range of 2-5 nm with cubic phase structure. The photoluminescence spectrum of ZnS nanoparticles exhibits four fluorescence emission peaks centered at 387 nm, 412 nm, 489 nm and 528 nm showing the application potential for the optical devices. In Raman spectra of ZnS nanoparticles, the modes around 320, 615 and 700 cm⁻¹ are observed.