中性红氧化褪色光度法测定海带中的微量碘

讨论了用H2SO4-KBr-IO3--中性红氧化褪色光度法测定海带中微量碘的方法。在酸性介质中,以KBr作为催化剂,碘酸根对中性红有褪色作用,且褪色的程度与碘酸根的量有关,碘定量测定的线性范围为0~25μg/mL,表观摩尔吸收系数ε=1.79×104L.mol-1.cm-1。回收率97.1%~101.7%。该法是测定海带中微量碘的一种较理想的方法。     

甲基红褪色光度法测定食盐中碘的研究

在酸性介质中,溴化钾存在下,碘酸根对甲基红有褪色作用,且褪色的程度与碘酸根的量有关,从而建立了碘的光度测定新方法。方法的最大吸收在520nm处,碘定量测定的线性范围为0～16μg/10mL,检出限为1.47×10-8g/mL。方法操作简单、快速、重现性好,用于加碘食盐中碘的测定,结果满意。     

甲酚红褪色分光光度法测定芬布芬的研究及其应用

在pH9.00的tris-HCl缓冲溶液中,甲酚红与芬布芬反应形成离子缔合物,使甲酚红溶液褪色.实验结果表明:最大褪色波长位于569.0nm,芬布芬浓度在0.05086～10.17μg/mL范围内遵循比尔定律,回归方程为ΔA=0.1702c+0.0107(c=μg/mL),相关系数为r=0.9996,表观摩尔吸光系数为4.537×104 L·mol-1·cm-1.据此建立了测定药物制剂和生物样品中芬布芬含量的褪色分光光度法,样品测定平均回收率为97.97%～101.6%.     

甲基红氧化褪色光度法测定食盐中碘

基于在盐酸介质中 ,碘酸根在溴化钾的催化作用下使甲基红氧化褪色的反应 ,建立了测定微量碘的新方法。方法的线性范围为 8μg/2 5mL～ 2 2 μg/2 5mL ,表观摩尔吸收系数为 6 .5× 1 0 4 L·mol- 1 ·cm- 1 ,已用于食盐中碘的测定。     

水发食品中痕量甲醛的测定

为建立催化动力学荧光法测定痕量甲醛的新方法,基于在酸性介质中,甲醛催化KBrO3氧化藏红T的褪色反应,使其荧光猝灭的原理,将反应体系在沸水浴中加热8 min,流水冷却3min,采用动力学荧光法测定痕量甲醛。结果表明,甲醛在0.02~0.14μg/mL范围内与△F值呈良好的线性关系,线性方程为△F=-1.642 8+274.12C(μg/mL),r=0.996 9,检出限为0.011μg/mL。该法简便,快速,常见共存物质干扰小,可用于水发食品及其它食品中甲醛含量的测定,加标回收率为84.63%~94.93%。     

气浮溶剂浮选光度法测定食品中痕量SO32-的研究

提出了碘溴化十六烷基三甲胺缔合体系溶剂浮选褪色光度法测定SO2-3 的新方法,方法的摩尔吸光系数ε365=3.0×105L·mol-1·cm-1,最大吸收波长为365 nm,测定5.0μg/50 mLSO2-3 6次,RSD为1.8%,线性范围为0~30μg/50 mL,方法应用于食品中SO2-3 的测定。     

甲酚红褪色分光光度法测定吡罗昔康

用褪色分光光度法(测定药物制剂和生物样品中吡罗昔康含量。)在pH8.75的tris-HCl缓冲溶液中,甲酚红与吡罗昔康反应形成离子缔合物,使甲酚红溶液褪色,最大褪色波长位于570nm,吡罗昔康浓度在0.06628～11.60μg/mL范围内遵循比尔定律,回归方程为ΔA=0.1404c+0.0067,相关系数为r=0.9996,表观摩尔吸光系数为4.703×104L·mol-1.cm-1。据此建立了方法,样品测定平均回收率为97.51%～101.4%。     

靛蓝胭脂红-溴酸钾体系催化光度法测定微量碘

研究了在室温及0．4mol/L H2SO4介质中碘离子对KBrO3氧化靛蓝胭脂红褪色反应的催化作用,建立了一种测定微量碘的新方法。碘离子浓度在0．20－2．0μg/mL范围内与△A呈线性关系,检测限为0．14μg/mL。多数常见离子无干扰。可用于海带中微量碘的测定。     

催化动力学光度法测定青霉素G及其机理研究

研究了在青霉素G存在下双氧水氧化苋菜红的褪色反应,建立了催化动力学光度法测定微量青霉素G的方法.方法线性范围为0.20～4.00μg/mL,回归方程y=-0.015p(μg/mL)+0.311,r=0.9998;方法线性范围为4.00～50.0μg/mL,回归方程y=0.001p(μg/mL)+0.280,r=0.99...     

离子色谱法同时测定蛋白胨中氯离子、硫酸根离子、碘离子

建立离子色谱法测定蛋白胨中氯离子、硫酸根离子、碘离子3种阴离子的含量。采用氢氧化钾淋洗液发生器产生的KOH溶液为流动相,进行梯度淋洗,流量为1.0 mL/min。氯离子、硫酸根离子的质量浓度分别在0.5～200μg/mL范围内与色谱峰面积呈良好的线性关系,碘离子的质量浓度在0.75～50μg/mL范围内与色谱峰面积呈良好的线性,线性相关系数均不小于0.999,检出限分别为0.003,0.01,0.22μg/mL。样品加标回收率为92.94%～96.59%,测定结果的相对标准偏差为2.42%～5.70%(n=9)。该方法灵敏、高效,可用于蛋白胨中氯离子、硫酸根离子、碘离子的快速准确测定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.