Velocity Characteristics of a Round Offset Jet with Different Offset Ratios in a Counterflow

Flow, Turbulence and Combustion - A jet entering a counterflow improves the dilution of contaminant discharged from a chemical factory through pipe. The velocity ratio of jet-to-counterflow and the...     

Passive Scalar in a Turbulent Channel Flow with Wall Velocity Disturbances

Direct Numerical Simulations (DNS) of a passive scalar in a turbulent channel flow with a normal velocity disturbance on the lower wall are presented for high and low Reynolds numbers. The aim is to reproduce the complex physics of turbulent rough flows without dealing with the geometric complexity. In addition, isothermal walls that cannot be easily assigned in an experiment, are considered. The paper explains the increase of heat transfer through the changes of the velocity and thermal structures. As in real rough flows, the transpiration produces an isotropization of the turbulence near the wall.     

Mixing Characteristics of a Flapping Jet from a Self-Exciting Nozzle

Experimental results of the mixing characteristics of a low-frequency flapping jet from a self-exciting nozzle are presented. The simple fluidic device used to generate the flapping motion is also described. The nozzle contains no external trigger and, unlike the flip-flop nozzle of Viets, contains no external feedback path. Both conventional and conditional averaging schemes are employed to characterise the turbulent mixing characteristics of the jet using data obtained from hot-wire anemometry. Flow-visualisation is used to characterise the flapping motion. It is revealed that the dynamic flapping motion enhances the large-scale mixing of the jet while concurrently suppressing the generation of the fine-scale turbulence. The results also indicate that high turbulence intensities, initiated by the flapping motion, are sustained even in the far-field flow region. This revised version was published online in July 2006 with corrections to the Cover Date.     

Near Field Round Jet Flow Downstream from an Abrupt Contraction Nozzle with Tube Extension

Round air jet development downstream from an abrupt contraction coupled to a uniform circular tube extension with length to diameter ratio L/D?=?1.2 and L/D?=?53.2 is studied experimentally. Smoke visualisation and systematic hot film velocity measurements are performed for low to moderate Reynolds numbers 1130?<?Re _b ?<?11320. Mean and turbulent velocity profiles are quantified at the tube exit and along the centerline from the tube exit down to 20 times the diameter D. Flow development is seen to be determined by the underlying jet structure at the tube exit which depends on Reynolds number, initial velocity statistics at the tube exit and the presence/absence of coherent structures. It is shown that the tube extension ratio L/D as well as the sharp edged abrupt contraction influence the initial jet structure at the tube exit. For both L/D ratios, the presence of the abrupt contraction results in transitional jet flow in the range 2000?<?Re _b ?<?4000 and in flow features associated with forced jets and high Reynolds numbers Re _b ?>?10⁴. The tube extension ratio L/D downstream from the abrupt contraction determines the shear layer roll up so that for L/D?=?1.2 flow visualisation suggests the occurrence of toroidal vortices for Re _b ?<?4000 whereas helical vortices are associated with the transitional regime for L/D?=?53.2. Found flow features are compared to features reported in literature for smooth contraction nozzles and long pipe flow.     

Effect of Nozzle Exit Turbulence on the Column Trajectory and Breakup Location of a Transverse Liquid Jet in a Gaseous Flow

This study examines the effect of fully developed turbulent flow at the exit of nozzle/injector on the trajectory and column breakup location of a liquid jet injected transverly into a gaseous crossflow. Liquid jet trajectory and column breakup for different nozzle geometries at different velocities of liquid jet and crossflow are analytically and experimentally Investigated. Shadowgraph imaging technique is used to determine the jet trajectory and breakup location of a transverse liquid jet in a uniform airflow. Particle image velocimetry (PIV) is used to measure the near-field velocity profile of a liquid jet discgarged into a quiescent atmosphere. The experimental results show a higher penetration and breakup height for the liquid jet ensuing from a nozzle with a smaller length to diameter ratio. This is due to the surface irregularities of the liquid column of a turbulent jet, which breaks up and consequently follows the cross airflow sooner. In order to capture the effect of turbulence, the analytical trajectory correlation developed in our previous studies is modified to account for the discharge coefficient of a nozzle. The discharge coefficient is estimated indirectly by comparing the liquid column trajectory predicted by the modified analytical correlation with that determined experimentally. The indirectly determined discharge coefficient is then used in the analytical correlation for predicting the breakup height of a transverse liquid jet. The results predicted using this approach are in good agreement with the experimental data of the present study at standard temperature and pressure (STP) test conditions.     

基于红外热像的自由剪切湍流被动标量高阶谱分析

利用红外热像仪对高压水射流进行了连续探测.对红外热像序列表征的标量脉动场进行双谱分析,检测湍射流的相干结构、射流不同截面内相干结构的尺度关联性以及射流不同发展阶段的特征尺度.研究表明,以红外热像为样本的全局自双谱表征了射流不同波段能分量对相干的贡献;按三列对图像采样的横断面局部互双谱给出了沿流向的大涡区、小涡区、以及各向同性湍流区的频率耦合特征;按三行对图像采样的纵向局部互双谱给出了射流的轴心线区、剪切层、空气湍流区大涡层和各向同性湍流层等各纵向断面的相干特征;通过红外热像序列的双谱分析,由流场相干结构的尺度关联性,得到了射流诱导的空气湍流场在不同发展阶段的特征尺度.     

Passive Scalar Transport in a Turbulent Mixing Layer

This paper describes a combined experimental and numerical study of scalar transport in spatially developing, two-stream, turbulent mixing layers with velocity ratios of approximately 2:1. The experimental mixing layer was created by an S-shaped splitter plate mounted in a wind tunnel, and the concentration field was realized by releasing incense smoke into the high-speed side boundary layer above the splitter plate. Simultaneous measurements of the velocity and concentration fields were performed. A 12-sensor hot-wire probe was used to measure the velocity field and its gradients, while the concentration field was recorded with digital photographs of the laser-illuminated smoke. In parallel, a large-eddy simulation (LES) of the spatially developing mixing layer was carried out. Auxiliary turbulent boundary layer LES were used to provide high quality inflow boundary conditions for the velocity and concentration fields. By synchronizing the velocity and concentration measurements, concentration fluxes were also determined. Octant analysis based on the sign combinations of the velocity and concentration fuctuations was performed on the flux data to investigate the scalar transport processes. It was found that octants compatible with mean gradient transport of the scalar contribute most to the scalar fluxes. Conditional planar averages of scalar and momentum fluxes were obtained to determine their spatial distribution with respect to the organized roller and rib vortices of the mixing layer, and distinct patterns were observed. The simulation provided additional insight about the flow and scalar flux distribution topology. This topology was found to be partially compatible with simple models of roller and rib vortices that transport the scalar in a mean gradient sense.     

Transport of a Passive Scalar in a Stratified Porous Medium

A uniform and horizontal head gradient J is applied to a stratified formation whose given random conductivity K is function of the vertical coordinate x ₃ only. K is assumed to be stationary and of finite integral scale I _v. By Darcy's law, the velocity field V ₁(x ₃)=JK depicts a fluctuating shear flow. A solute body is injected instantaneously in the formation. In a Lagrangean framework, the second spatial moment of the mean concentration C(x,t) can be related to the one-particle trajectories variance X ₁₁(t,Pe) where Pe = V₁I_v/D _dT and _dT is the transverse pore-scale dispersion coefficient. X ₁₁ was determined in the past by Matheron and de Marsily (1980). The present study is concerned with determining the local concentration variance _C ² , that depends on the two-particles trajectories covariance Z ₁₁(t). The latter is derived exactly and langle Crangle and _C ² are determined by assuming normal or lognormal probability distribution of trajectories. The results are illustrated for small and very large (ergodic) solute plumes. For large travel time the concentration coefficient of variation at the center of the plume tends asymptotically to a constant value, unlike formations with finite horizontal correlation length of the hydraulic conductivity. The results may serve for benchmarking of numerical codes and in applications for short travel distances in highly anisotropic formations.     

DNS and Modelling of Passive Scalar Transport in Turbulent Channel Flow with a Focus on Scalar Dissipation Rate Modelling

A direct numerical simulation of turbulent channel flow with an imposed mean scalar gradient is analyzed with a focus on passive scalar flux modelling and in particular the treatment of the passive scalar dissipation equation. The Prandtl number is 0.71 and the Reynolds number based on the wall friction velocity and the channel half width is 265. Budgets are presented for the passive scalar variance and its dissipation rate, as well as for the individual scalar flux components. These form a basis for a discussion of modelling issues related to explicit algebraic scalar flux modelling. This revised version was published online in July 2006 with corrections to the Cover Date.     

Scalar Mixing and Large-Scale Coherent Structures in a Turbulent Swirling Jet

The paper presents large eddy simulations of co-annular swirling jets into an open domain. In each of the annuli a passive scalar is introduced and its transport is computed. If the exit of the pilot jet is retracted strong coherent flow structures are generated which substantially impact on the transport and mixing of the scalars. Average and instantaneous fields are discussed to address this issue. A conditional averaging technique is devised and applied to velocity and scalars. This allows to quantify the impact of the coherent structures on the mixing process.     

Turbulent Scalar Mixing in a Skewed Jet in Crossflow: Experiments and Modeling

Turbulent mixing of an inclined, skewed jet injected into a crossflow is investigated using MRI-based experiments and a high-fidelity LES of the same configuration. The MRI technique provides three-dimensional fields of mean velocity and mean jet concentration. The 30° skew of the jet relative to the crossflow produces a single dominant vortex which introduces spanwise asymmetries to the velocity and concentration fields. The turbulent scalar transport of the skewed jet is investigated in further detail using the LES, which is validated against the experimental measurements. Mixing is found to be highly anisotropic throughout the jet region. Isotropic turbulent diffusivity and viscosity are used to calculate an optimal value of the turbulent Schmidt number, which varies widely over the jet region and lies mostly outside of the typically accepted range 0.7 ≤ S c _t ≤ 0.9. Finally, three common scalar flux models of increasing complexity are evaluated based on their ability to capture the anisotropy and predict the scalar concentration field of the present configuration. The higher order models are shown to better represent the turbulent scalar flux vector, leading to more accurate calculations of the concentration field. While more complex models are better able to capture the turbulent mixing, optimization of model constants is shown to significantly affect the results.     

Large Eddy Simulation of Scalar Mixing in a Coaxial Confined Jet

The highly turbulent flow occurring inside gas-turbine combustors requires accurate simulation of scalar mixing if CFD methods are to be used with confidence in design. This has motivated the present paper, which describes the implementation of a passive scalar transport equation into an LES code, including assessment/testing of alternative discretisation schemes to avoid over/undershoots and excessive smoothing. Both second order accurate TVD and higher order accurate DRP schemes are assessed. The best performance is displayed by a DRP method, but this is only true on fine meshes; it produces similar (or larger) errors to a TVD scheme on coarser meshes, and the TVD approach has been retained for LES applications. The unsteady scalar mixing performance of the LES code is validated against published DNS data for a slightly heated channel flow. Excellent agreement between the current LES predictions and DNS data is obtained, for both velocity and scalar statistics. Finally, the developed methodology is applied to scalar transport in a confined co-axial jet mixing flow, for which experimental data are available. Agreement with statistically averaged fields for both velocity and scalar, is demonstrated to be very good, and a considerable improvement over the standard eddy viscosity RANS approach. Illustrations are presented of predicted time-resolved information e.g. time histories, and scalar pdf predictions. The LES results are shown, even using a simple Smagorinsky SGS model, to predict (correctly) lower values of the turbulent Prandtl number in the free shear regions of the flow, compared to higher values in the wall-affected regions. The ability to predict turbulent Prandtl number variations (rather than input these as in combustor RANS CFD models) is an important and promising feature of the LES approach for combustor flow simulation since it is known to be important in determining combustor exit temperature traverse.     

圆射流中拟序涡配对的数值模拟

用三维涡丝法结合涡丝的增加与合并技术,对不可压圆射流场,数值模拟了在扰动中加入次谐波后流场拟序涡的配对,配对情况与实验结果一致,通过对不同时刻涡量图的比较与分析,给出了次谐波初始强度对涡配对的影响,初始强度越大,涡配对出现越早,涡配对位置越往上游移动;同时还得到了基波与次谐波初始相位差和涡配对的关系,没有相位差时,次谐波增长最快,相位差增加时,涡配对的速度降低。说明控制次谐波的初始强度和基波与次谐波的相位差,能起到控制圆射流剪切层乃至控制整个射流场的目的。     

Passive Scalar Transport in a Turbulent Cylinder Wake in the Presence of a Downstream Cylinder

This work aims to investigate how the presence of a downstream cylinder affects the passive scalar transport in a cylinder wake. The wake was generated by two tandem brass circular cylinders of the same diameter (d). The cylinder centre-to-centre spacing L/d was 1.3, 2.5 and 4.0, respectively, covering the three typical flow regimes of this flow. The upstream cylinder was slightly heated. Measurements were conducted at x/d= 10 and Re (≡ dU _∞/ν, where U _∞ is the free-stream velocity and ν is the kinematic viscosity of fluid) = 7000. A three-wire probe consisting of an X-wire and a cold wire was used to measure the velocity and temperature fluctuations, while an X-wire provided a phase reference. The phase-averaged velocity vectors and vorticity display single vortex street behind the downstream cylinder, irrespective of the flow regimes. However, the detailed flow structure exhibits strong dependence on L/d in terms of the Strouhal number, the vortex strength and its downstream evolution. This naturally affects passive scalar transport. The coherent and incoherent heat flux vectors show significant variation for different L/d.     

Model for the Formation of Acoustic Self-Oscillations in a Chamber with a Jet Flowing Through its Nozzle

This paper describes free acoustic oscillations of gas in a chamber with a jet flowing through its nozzle in the case of nonstationary intensity component of vortex sheet flowing down from the edge of the nozzle. There is established feedback between acoustic oscillations and oscillations induced by a corresponding vortex sheet component. It is shown that, in the presence of given feedback, there could be instability of acoustic oscillations, which would result in acoustic self-oscillations in the chamber. The boundaries of the domain in which instability is formed are determined by developing a mathematical model of stable acoustic oscillations in the chamber with account for the influence of the vortex sheet.     

Experimental and Numerical Study of the Scalar Turbulent/Non-Turbulent Interface Layer in a Jet Flow

Based on two large-eddy simulations (LES) of a non-reacting turbulent round jet with a nozzle based Reynolds number of 8,610 with the same configuration as the one that has recently been investigated experimentally (Gampert et al., 2012; J Fluid Mech, 2012; J Fluid Mech 724:337, 2013), we examine the scalar turbulent/non-turbulent (T/NT) interface layer in the mixture fraction field of the jet flow between ten and thirty nozzle diameters downstream. To this end, the LES—one with a coarse grid and one with a fine grid—are in a first step validated against the experimental data using the axial decay of the mean velocity and the mean mixture fraction as well as based on radial self-similar profiles of mean and root mean square values of these two quantities. Then, probability density functions (pdf) of the mixture fraction at various axial and radial positions are compared and the quality of the LES is discussed. In general, the LES results are consistent with the experimental data. However, in the flow region where the imprint of the T/NT interface layer is dominant in the mixture fraction pdf, discrepancies are observed. In a next step, statistics of the T/NT interface layer are studied, where a satisfactory agreement for the pdf of the location of the interface layer from the higher resolved LES with the experimental data is observed, while the one with the coarse grid exhibits considerable deviations. Finally, the mixture fraction profile across the interface is investigated where the same trend as for the pdf of the location is present. In particular, it is found that the sharp interface that is present in experimental studies (Gampert et al., J Fluid Mech, 2013; Westerweel et al., J Fluid Mech 631:199, 2009) is less distinct in the LES results and rather diffused in radial direction outside of the T/NT interface layer.     

Vortex-In-Cell and Probability Density Function Approach for a Passive Scalar Field in a Mixing Layer

A Reynolds-averaged simulation based on the vortex-in-cell (VIC) and the transport equation for the probability density function (PDF) of a scalar has been developed to predict the passive scalar field in a two-dimensional spatially growing mixing layer. The VIC computes the instantaneous velocity and vorticity fields. Then the mean-flow properties, i.e. the mean velocity, the root-mean-square (rms) longitudinal and lateral velocity fluctuations, the Reynolds shear stress, and the rms vorticity fluctuations are computed and used as input to the PDF equation. The PDF transport equation is solved using the Monte Carlo technique. The convection term uses the mean velocities from the VIC. The turbulent diffusion term is modeled using the gradient transport model, in which the eddy diffusivity, computed via the Boussinesq's postulate, uses the Reynolds shear stress and gradients of mean velocities from the VIC. The molecular mixing term is closed by the modified Curl model.

The computational results were compared with two-dimensional experimental results for passive scalar. The predicted turbulent flow characteristics, i.e. mean velocity and rms longitudinal fluctuations in the self-preserving region, show good agreement with the experimental measurements. The profiles of the mean scalar and the rms scalar fluctuations are also in reasonable agreement with the experimental measurements. Comparison between the mean scalar and the mean velocity profiles shows that the scalar mixing region extends further into the free stream than does the momentum mixing region, indicating enhanced transport of scalar over momentum. The rms scalar profiles exhibit an asymmetry relative to the concentration centerline, and indicate that the fluid on the high-speed side mixes at a faster rate than the fluid on the low-speed side. The asymmetry is due to the asymmetry in the mixing frequency cross-stream profiles. Also, the PDFs have peaks biased toward the high-speed side.     

Effect of the Nozzle Edge Shape on the Acoustic Sensitivity of a Jet

The effect of the nozzle edge shape on the acoustic sensitivity of jets, that is, on the dependence of the jet parameters on the amplitude and frequency of the acoustic oscillations produced by an external source, is experimentally studied. The investigation was performed for nozzle edge configurations, the variation of which did not result in a change in the jet characteristics without external acoustic excitation. This means that the change in the edge shape alone had no influence on the flow pattern at the nozzle exit or the boundary layer flow regime on the nozzle walls. Measurements of the dependence of the mean velocity and the velocity fluctuation intensity on the jet axis on the distance from the nozzle exit showed that a change in the nozzle edge shape can lead to a change in the acoustic sensitivity of the jet when the jet is exposed to external acoustic action.     

The Effect of a Low-Frequency Structure on Passive Scalar Transport in the Flow Over a Surface-Mounted Rib

The unsteadiness of the flow over a surface-mounted rib involving passive scalar transport is studied using large-eddy simulation (LES) at a Reynolds number of 3000 (based on the rib height, \(h\), and the free-stream velocity, \(U_{0})\). The purpose of the present study is to gain further insight into the physical origin of the flow instability and its effect on passive scalar transport. Fourier spectral analysis of the velocity at different positions suggests that, in addition to the K-H instability in the shear layer (St ≈?0.42), two lower frequencies (St ≈?0.06 and 0.09) also exist. It is observed that the low-frequency instabilities accompany the shedding process of vortical structures. One low frequency, at \(\text {St}\approx 0.06\), is related to the pumping motion of the recirculation bubble, while the other, at \(\text {St}\approx 0.09\), is associated with the flapping mode of the shear layer. Through comparisons of velocity and temperature fields and the spectra of scalar fluctuations, it is found that the passive scalar is transported by the convection of vortical structures.     

Measurements of Scalar Variance, Scalar Dissipation, and Length Scales in Turbulent Piloted Methane/Air Jet Flames

One-dimensional (line) measurements of mixture fraction, temperature, and scalar dissipation in piloted turbulent partially premixed methane/air jet flames (Sandia flames C, D, and E) are presented. The experimental facility combines line imaging of Raman scattering, Rayleigh scattering, and laser-induced CO fluorescence. Simultaneous single-shot measurements of temperature and the mass fractions of all the major species (N₂, O₂, CH₄, CO₂, H₂O, CO, and H₂) are obtained along 7 mm segments with a nominal spatial resolution of 0.2 mm. Mixture fraction, ξ, is then calculated from the measured mass fractions. Ensembles of instantaneous mixture fraction profiles at several streamwise locations are analyzed to quantify the effect of spatial averaging on the Favre average scalar variance, which is an important term in the modeling of turbulent nonpremixed flames. Results suggest that the fully resolved scalar variance may be estimated by simple extrapolation of spatially filtered measurements. Differentiation of the instantaneous mixture fraction profiles yields the radial contribution to the scalar dissipation, χ _r = 2D _ξ(?ξ/?r)², and radial profiles of the Favre mean and rms scalar dissipation are reported. Scalar length scales, based on autocorrelation of the spatial profiles of ξ and χ _r , are also reported. These new data on this already well-documented series of flames should be useful in the context of validating models for sub-grid scalar variance and for scalar dissipation in turbulent flames.