The NICS‐XY‐Scan: Identification of Local and Global Ring Currents in Multi‐Ring Systems

Nucleus‐independent chemical shift (NICS)‐based methods are very popular for the determination of the induced magnetic field under an external magnetic field. These methods are used mostly (but not only) for the determination of the aromaticity and antiaromaticity of molecules and ions, both qualitatively and quantitatively. The ghost atom that serves as the NICS probe senses the induced magnetic field and reports it in the form of an NMR chemical shift. However, the source of the field cannot be determined by NICS. Thus, in a multi‐ring system that may contain more than one induced current circuit (and therefore more than one source of the induced magnetic field) the NICS value may represent the sum of many induced magnetic fields. This may lead to wrong assignments of the aromaticity (and antiaromaticity) of the systems under study. In this paper, we present a NICS‐based method for the determination of local and global ring currents in conjugated multi‐ring systems. The method involves placing the NICS probes along the X axis, and if needed, along the Y axis, at a constant height above the system under study. Following the change in the induced field along these axes allows the identification of global and local induced currents. The best NICS type to use for these scans is NICS_πZZ, but it is shown that at a height of 1.7 Å above the molecular plane, NICS_ZZ provides the same qualitative picture. This method, namely the NICS‐XY‐scan, gives information equivalent to that obtained through current density analysis methods, and in some cases, provides even more details.     

Antiferromagnetic Interactions in 1D Heisenberg Linear Chains of 7‐(4‐Fluorophenyl) and 7‐Phenyl‐Substituted 1,3‐Diphenyl‐1,4‐dihydro‐ 1,2,4‐benzotriazin‐4‐yl Radicals

7‐(4‐Fluorophenyl) and 7‐phenyl‐substituted 1,3‐diphenyl‐1,4‐dihydro‐1,2,4‐benzotriazin‐4‐yl radicals were characterized by X‐ray diffraction analysis and variable‐temperature magnetic susceptibility studies. The radicals pack in 1D π stacks of equally spaced slipped radicals with interplanar distances of 3.59 and 3.67 Å and longitudinal angles of 40.97 and 43.47°, respectively. Magnetic‐susceptibility studies showed that both radicals exhibit antiferromagnetic interactions. Fitting the magnetic data revealed that the behavior is consistent with 1D regular linear antiferromagnetic chain with J=?12.9 cm^?1, zJ′=?0.4 cm^?1, g=2.0069 and J=?11.8 cm^?1, zJ′=?6.5 cm^?1, g=2.0071, respectively. Magnetic‐exchange interactions in benzotriazinyl radicals are sensitive to the degree of slippage, and inter‐radical separation and subtle changes in structure alter the fine balance between ferro‐ and antiferromagnetic interactions.     

Heisenberg behavior of some carbon‐beryllium compounds: How well truncated‐CI approaches work

This works tries to establish the performance of truncated CI calculations on the evaluation of magnetic coupling parameters with respect to available FCI estimates on a set of carbon‐beryllium clusters. First‐, second‐ and third‐neighbor magnetic coupling constants have been evaluated and many body effective parameters as the cyclic terms. They result from the fitting of the low‐lying states to the eigenvalues of an extended Heisenberg Hamiltonian, involving not only two‐body isotropic terms but also cyclic terms. SDCI and DDCI calculations have been carried out and their performance compared with FCI ones. The impact of the basis set choice and size‐consistency errors have been explored. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2011     

Rational Design of a Lanthanide‐Based Complex Featuring Different Single‐Molecule Magnets

The rational synthesis of the 2‐{1‐methylpyridine‐N‐oxide‐4,5‐[4,5‐bis(propylthio)tetrathiafulvalenyl]‐1H‐benzimidazol‐2‐yl}pyridine ligand ( L ) is described. It led to the tetranuclear complex [Dy₄(tta)₁₂( L )₂] ( Dy‐Dy₂‐Dy ) after coordination reaction with the precursor Dy(tta)₃?2 H₂O (tta^?=2‐thenoyltrifluoroacetonate). The X‐ray structure of Dy‐Dy₂‐Dy can be described as two terminal mononuclear units bridged by a central antiferromagnetically coupled dinuclear complex. The terminal N₂O₆ and central O₈ environments are described as distorted square antiprisms. The ac magnetism measurements revealed a strong out‐of‐phase signal of the magnetic susceptibility with two distinct sets of data. The high‐ and low‐frequency components were attributed to the two terminal mononuclear single‐molecule magnets (SMMs) and the central dinuclear SMM, respectively. A magnetic hysteresis loop was detected at very low temperature. From both structural and magnetic points of view, the tetranuclear SMM Dy‐Dy₂‐Dy is a self‐assembly of two known mononuclear SMMs bridged by a known dinuclear SMM.     

The chemistry of 1,6‐dioxapyrenes part 3 : Scope and limitations of an acid catalyzed ring‐closing reaction

One of the few methods for synthesis of 1,6‐dioxapyrenes is the acid catalyzed cyclization of 2,6‐disubstituted 1,5‐bis(2‐oxoalkoxy)naphthalenes. The scope and limitations of this reaction has been investigated and 11 new 2,7‐disubstituted 1,6‐dioxapyrenes have been prepared and characterized. Most of the compounds undergo two reversible oxidations to give the corresponding radical as well as di‐ cations.     

The theoretical study of aromaticity in N-heteroatom compounds

In this article, we used nucleus-independent chemical shifts (NICS), aromatic stabilization energies (ASE), and magnetic susceptibility isotropic, calculated with (density functional theory) B3LYP levels at the 6-311+G (d, p) basis set, to evaluate the aromaticity of a set of 12 six-member planar π-electron aromatic systems: mono- and multi-substituted benzenes by nitrogen atoms. NICS were calculated at the center of the rings, 0.5 Å and 1 Å above the molecular plane, and in order to reflect the π-electron effects, we compare the values of NICS(0.5). The result statistically revealed significant correlations among the above three criteria. The comparison result was obtained as benzene > mono-nitrogen benzene > di-nitrogen benzene > tri-nitrogen benzene > tetra-nitrogen benzene > penta-nitrogen benzene.     

A Computational and Experimental Study of Thieno[3,4‐b]thiophene as a Proaromatic π‐Bridge in Dye‐Sensitized Solar Cells

Four D ‐π‐A dyes (D=donor, A=accpetor) based on a 3,4‐thienothiophene π‐bridge were synthesized for use in dye‐sensitized solar cells (DSCs). The proaromatic building block 3,4‐thienothiophene is incorporated to stabilize dye excited‐state oxidation potentials. This lowering of the excited‐state energy levels allows for deeper absorption into the NIR region with relatively low molecular weight dyes. The influence of proaromatic functionality is probed through a computational analysis of optimized bond lengths and nucleus independent chemical shifts (NICS) for both the ground‐ and excited‐ states. To avoid a necessary lowering of the TiO₂ semiconductor conduction band (CB) to promote efficient dye–TiO₂ electron injection, strong donor functionalities based on triaryl‐ and diarylamines are employed in the dye designs to raise both the ground‐ and excited‐state oxidation potentials of the dyes. Solubility, aggregation, and TiO₂ surface protection are addressed by examining an ethylhexyl alkyl chain in comparison to a simple ethyl chain on the 3,4‐thienothiophene bridge. Power conversion efficiencies of up to 7.8 % are observed.     

Aromatic Homologation by Non‐Chelate‐Assisted RhIII‐Catalyzed CH Functionalization of Arenes with Alkynes

Larger condensed arenes are of interest owing to their electro‐ and photochemical properties. An efficient synthesis is the catalyzed aromatic annulation of a smaller arene with two alkyne molecules. Besides difunctionalized starting materials, directed C? H functionalization can be used for such aromatic homologation. However, thus far the requirement of either pre‐functionalized substrates or suitable directing groups were limiting this approach. Herein, we describe a rhodium(III)‐catalyzed method allowing the use of completely unbiased arenes and internal alkynes. The reaction works best with copper(II) 2‐ethylhexanoate and decabromodiphenyl ether as the oxidant combination. This aromatic annulation tolerates a variety of functional groups and delivers homologated condensed arenes. Aside from simple benzenes, naphthalenes and higher condensed arenes provide access to highly substituted and highly soluble acenes structures having important electronic and photophysical properties.     

Using three major criteria to evaluate aromaticity of five-member C-containing rings and their Si-, N-, and P-substituted aromatic heterocyclics

In this paper, we used bond-length equalization, aromatic stabilization energies (ASE) and nucleus-independent chemical shifts (NICS), calculated with (density functional theory) B3LYP levels at the 6-311+G^** basis set, to evaluate the aromaticity of a set of 38 five-member planar π-electron aromatic systems: sila-, aza- and phospha- derivatives and their parent systems. The result revealed statistically significant correlations among the above three criteria, and the order of aromaticity of the whole set was: Aza- derivatives rings > Phospha- derivatives rings > Sila- derivatives rings > Carbon-containing rings; NICS(0.6) and NICS(0.8) had the same results in evaluating the order of aromaticity in our case.     

Quantum‐chemical analyses of aromaticity,UV spectra,and NMR chemical shifts in plumbacyclopentadienylidenes stabilized by Lewis bases

We carried out a series of zeroth‐order regular approximation (ZORA)‐density functional theory (DFT) and ZORA‐time‐dependent (TD)‐DFT calculations for molecular geometries, NMR chemical shifts, nucleus‐independent chemical shifts (NICS), and electronic transition energies of plumbacyclopentadienylidenes stabilized by several Lewis bases, (Ph)₂(^tBuMe₂Si)₂C₄PbL₁L₂ (L₁, L₂ = tetrahydrofuran, Pyridine, N‐heterocyclic carbene), and their model molecules. We mainly discussed the Lewis‐base effect on the aromaticity of these complexes. The NICS was used to examine the aromaticity. The NICS values showed that the aromaticity of these complexes increases when the donation from the Lewis bases to Pb becomes large. This trend seems to be reasonable when the 4n‐Huckel rule is applied to the fractional π‐electron number. The calculated ¹³C‐ and ²⁰⁷Pb‐NMR chemical shifts and the calculated UV transition energies reasonably reproduced the experimental trends. We found a specific relationship between the ¹³C‐NMR chemical shifts and the transition energies. As we expected, the relativistic effect was essential to reproduce a trend not only in the ²⁰⁷Pb‐NMR chemical shifts and J[Pb‐C] but also in the ¹³C‐NMR chemical shifts of carbons adjacent to the lead atom. © 2014 Wiley Periodicals, Inc.     

High‐Performance Magnetic Refrigerant Featuring One‐Dimensional Gd‐O Chains and O‐Gd3 Triangles

Magnetic cooling at low temperature has attracted intensive interest in cryogenics research, which may become important as cooling medium for long‐wave photon detectors to support space exploration. Here, we report a Gd‐based quaternary magnetic refrigerant material, Gd₅BSi₂O₁₃, containing chains of face‐shared GdO₉ polyhedra and geometrically frustrated OGd₃ triangles. Magnetic measurements indicate that Gd₅BSi₂O₁₃ exhibits a large magnetocaloric effect (MCE) about 1.74 times that of the practical magnetic refrigerant GGG (−ΔS_m=67.0 J kg⁻¹ K⁻¹). We analyzed the origin of the large MCE by comparing Gd^III‐containing compounds with different structures and concentrations of Gd^III.     

Aromatic Homologation by Non‐Chelate‐Assisted RhIII‐Catalyzed C?H Functionalization of Arenes with Alkynes

Larger condensed arenes are of interest owing to their electro‐ and photochemical properties. An efficient synthesis is the catalyzed aromatic annulation of a smaller arene with two alkyne molecules. Besides difunctionalized starting materials, directed C H functionalization can be used for such aromatic homologation. However, thus far the requirement of either pre‐functionalized substrates or suitable directing groups were limiting this approach. Herein, we describe a rhodium(III)‐catalyzed method allowing the use of completely unbiased arenes and internal alkynes. The reaction works best with copper(II) 2‐ethylhexanoate and decabromodiphenyl ether as the oxidant combination. This aromatic annulation tolerates a variety of functional groups and delivers homologated condensed arenes. Aside from simple benzenes, naphthalenes and higher condensed arenes provide access to highly substituted and highly soluble acenes structures having important electronic and photophysical properties.     

Novel physically adapted STO##‐3G basis sets. Efficiency for prediction of second‐order electric and magnetic properties of aromatic hydrocarbons

Efficient scheme for construction of physically justified STO^##‐3G_el and STO^##‐3G_mag basis sets has been proposed. It is based upon the analysis of analytical form of the first‐order correction functions to unperturbed STO basis sets under the perturbation by electric or magnetic fields. The test calculations of polarizability, magnetic susceptibility and chemical shifts performed for a series of aromatic compounds within the developed basis set in the framework of Hartree‐Fock and Density Functional Theory (DFT) approaches show good agreement of the predicted properties with experiments. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Derivatives of Coenzyme F430 with a Covalently Attached α‐Axial Ligand. Part I

X‐Ray structures of the enzyme methyl‐coenzyme M reductase show that the Ni‐center in the prosthetic group coenzyme F430 is penta‐ or hexacoordinated with the carboxamide group of a glutamine residue occupying the axial coordination site on the α‐side of the macrocycle. To obtain diastereoselectively coordinated complexes for mechanistic and spectroscopic studies of the free coenzyme in solution, we aimed to prepare partial‐synthetic derivatives of coenzyme F430 that have a coordinating group attached via a linker to one of the propanoic acid side chains. By using molecular‐mechanics calculations and two different conformational search methods, a set of 50 structures containing imidazole or pyridine units as potential ligands were computationally tested according to geometric criteria defining coordinating conformations. The best candidates proved to be proline‐containing tri‐ and tetrapeptides with a methyl‐histidine as the C‐terminal residue. These linkers were synthesized, and their conformation was determined by NMR. Refinement of the molecular modeling by using the experimentally determined geometric restraints allowed us to decide that the tripeptide Pro‐Pro‐His(π‐Me)‐OMe ( 10 ) was the most promising of all tested structures for attachment to the side chain at C(3) or C(13) of F430.     

Synthesis,structural features and biochemical activity assessment of N,N′‐bis‐(2‐mercaptophenylimine)‐2,5‐thiophenedicarboxaldehyde Schiff base and its Co(II), Ni(II), Cu(II) and Zn(II) complexes

The tetradentate Schiff base ligand (SB), N,N′‐bis‐(2‐mercaptophenylimine)‐2,5‐thiophenedicarboxaldehyde was prepared via condensation of 2,5‐thiophene‐dicarboxaldehyde with 2‐aminothiophenol in a 1:2 molar ratio by conventional method. Additionally, its Co(II), Ni(II), Cu(II) and Zn(II) complexes have been synthesized and fully characterized by elemental analysis, FT‐IR, ¹H NMR, ¹³C NMR, UV–Vis, ESR, ESI‐mass, conductivity and magnetic susceptibility measurements. Spectral studies suggested that, the Schiff base coordinate metal ions through the azomethine N‐ and deprotonated thiol S‐ atoms. Based on UV–Vis absorption and magnetic susceptibility data, tetrahedral geometry was assigned for both Co(II) and Zn(II) complexes, whereas on the other hand, square planar geometry for both Ni(II) and Cu(II) complexes. The Schiff base and its metal complexes were screened for their in vitro antimicrobial activity by minimum inhibitory concentration (MIC) method. Free radical scavenging activity of the novel compounds was determined by elimination of 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) radicals. In addition, the interactions of the free ligand and its complexes with calf thymus DNA (CT‐DNA) were explored using absorption, emission and viscosity measurements techniques.     

Planar 2‐Pyridyl‐1,2,3‐triazole Derived Metallo‐ligands: Self‐assembly with PdCl2 and Photocatalysis

Self‐assembled metallosupramolecular architectures (MSAs) with built‐in functionalities such as light‐harvesting metal centers are a promising approach for developing emergent properties within discrete molecular systems. Herein we describe the synthesis of two new but simple “click” ligands featuring a bidentate 2‐pyridyl‐1,2,3‐triazole chelate pocket linked to a monodentate pyridyl (either 3‐ or 4‐substituted, L1 and L2 ) unit. The ligands and the corresponding four Pd^IIand Pt^IImetallo‐ligands ( Pd1 , Pd2 , Pt1 and Pt2 ) were synthesized and characterized using nuclear magnetic resonance (NMR) spectroscopy, electrospray ionization mass spectrometry (ESI‐MS), and X‐ray crystallography. Solid‐state characterization of the series of ligands and metallo‐ligands revealed that these compounds display a co‐planar conformation of all the aryl units. The Pt^IIcontaining metallo‐ligands ( Pt1 and Pt2 ) were found to assemble into square ( Sqr ) and triangular ( Tri ) shaped architectures when combined with neutral PdCl₂ linker units. Additionally, the ability of the Pt^IImetallo‐ligands and Tri to photocatalyze the cycloaddition of singlet oxygen to anthracene was investigated.     

Poly(p‐phenylenediamine)‐coated magnetic particles: Preparation and electrochemical properties

Magnetic particles are of great interest in various biomedical applications, such as, sample preparation, in vitro biomedical diagnosis, and therapy. For biosensing applications, the used functional magnetic particles should answer numerous criteria such as; submicron size in order to avoid rapid sedimentation, high magnetic content for fast separations under applied magnetic field, and finally, good colloidal stability. Therefore, the aim of this work was to prepare submicron magnetic core and conducting polymer shell particles. The polymer shell was induced using p‐phenylenediamine as key monomer. The obtained core–shell particles were characterized in terms of particle size, size distribution, magnetization properties, Fourier transform infrared (FTIR) analysis, surface morphology, chemical composition, cyclic voltammetry, and impedance spectroscopy. The best experimental condition was found using 40 mg of povidone (PVP—stabilizing agent) and 0.16 mmol of p‐phenylenediamine. Using such initial composition, the core‐shell magnetic nanoparticles shown a narrowed size distribution around 290 nm and high magnetic content (above 50%). The obtained amino containing submicron highly magnetic particles were found to be a conducting material and superparamagnetic in nature. These promising conducting magnetic particles can be used for both transport and lab‐on‐a‐chip detection.     

Summation of nucleus independent chemical shifts as a measure of aromaticity

When the nucleus independent chemical shifts, NICS(1)zz, for a set of aromatic and antiaromatic hydrocarbons are summed, they show an excellent linear relationship with the magnetic susceptibility exaltation, Lambda, for neutral, cationic, and monoanionic species. Aromatic and antiaromatic dianions show a similar relationship but with a different slope. However, when both Lambda and the summation of NICS(1)zz are divided by the area of the ring squared, the vast majority of the aromatic and antiaromatic species fall on the same line, indicating that both NICS and Lambda are affected by the size of the ring. The species that deviate slightly from the line are a few of the anionic compounds, which may be a result of the difficulties of calculating magnetic properties of anions. This is the first report of the relationship of NICS to ring area. In addition, the excellent correlation between Lambda and the summation of NICS(1)zz demonstrates that summation of NICS(1)zz values for individual ring systems of polycyclic ring systems to give a measure of the aromaticity of the entire system is justified. By extension, the excellent correlation also serves to demonstrate that the NICS(1)zz values for individual ring systems are reliable measures of local aromaticity/antiaromaticity. Finally, the excellent correlation between experimental shifts and the 13C NMR shifts calculated with density functional theory, B3LYP/6-311+g(d,p), serves as an indirect validation of the accuracy of the NICS(1)zz calculated by the same method and basis set.     

To what extent can aromaticity be defined uniquely?

Statistical analyses of quantitative definitions of aromaticity, ASE (aromatic stabilization energies), RE (resonance energies), Lambda (magnetic susceptibility exaltation), NICS, HOMA, I5, and A(J), evaluated for a set of 75 five-membered pi-electron systems: aza and phospha derivatives of furan, thiophene, pyrrole, and phosphole (aromatic systems), and a set of 30 ring-monosubstituted compounds (aromatic, nonaromatic, and antiaromatic systems) revealed statistically significant correlations among the various aromaticity criteria, provided the whole set of compounds is involved. Hence, broadly considered, the various manifestations of aromaticity are related and aromaticity can be regarded statistically as a one-dimensional phenomenon. In contrast, when comparisons are restricted to some regions or groups of compounds, e.g., aromatic compounds with ASE > 5 kcal/mol or polyhetero-five-membered rings, the quality of the correlations can deteriorate or even vanish. In practical applications, energetic, geometric, and magnetic desriptors of aromaticity do not speak with the same voice. Thus, in this sense, the phenomenon of aromaticity is regarded as being statistically multidimensional.     

Diels–Alder reactions of 5,6‐dihydrothiazolo[3,2‐d][1,4,2]diazaphospholes: A DFT investigation

The density functional theory level (B3LYP/6‐311G**) computations of the Diels–Alder (DA) reactions of 5,6‐dihydrothiazolo[3,2‐d][1,4,2]‐diazaphospholes with 1,3‐butadiene and with isoprene confirm pericyclic mechanism via asynchronous transition states. The aromatic character of the transition states is established by negative nucleus independent chemical shift (NICS) values falling in the range from −14 to −16. Integration of the dienophilic >CP functionality in the 6π aromatic azaphosphole ring raises the activation energy barrier (B3LYP/6‐311++G**//B3LYP/6‐311G**) compared to that for the DA reaction of the acyclic phosphaethene, but it is lower than the activation energy barrier for the DA reaction of the corresponding 10π aromatic system, thiazolo[3,2‐d][1,4,2]diazaphospholes. The experimentally observed stereo‐ and regioselectivities in the reactions can be accounted on the basis of secondary molecular orbital (SMO) interactions detected in the respective transition structures. The attachment of an electron‐withdrawing group to the dienophilic moiety enhances both stereo‐ and regio‐ selectivities which agree well with the experimental values. Solvent (toluene) effect studied with polarizable continuum model (PCM) indicates that the stereo‐ and regioselectivities are not affected by the solvent. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:402–410, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20196