Synthesis and gas permeation properties of poly(diarylacetylene)s having substituted and twisted biphenyl moieties

Diarylacetylene monomers containing substituted biphenyl ( 1a – f ) and anthryl ( 1g ) groups were synthesized and then polymerized with TaCl₅‐n‐Bu₄Sn catalyst to produce the corresponding poly(diarylacetylene)s ( 2a – g ). Polymers 2a – f were soluble in common organic solvents such as cyclohexane, toluene, and chloroform. According to thermogravimetric analysis, the onset temperatures of weight loss of the polymers were over 400 °C in air, indicating considerably high thermal stability. Free‐standing membranes 2a and 2c – e were prepared by the solution casting method. Desilylation of Si‐containing membrane 2c was carried out with trifluoroacetic acid to afford 3c . All the polymer membranes, especially those having twisted biphenyl groups, exhibited high gas permeability; for example, their oxygen permeability (PO ₂) values ranged from 130 to 1400 barrers. Membrane 2d having two chlorine atoms in the biphenyl group showed the highest gas permeability (PO ₂ = 1400 barrers) among the present polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 861–868, 2010     

Synthesis and properties of poly(phenylacetylenes) having two polar groups or one cyclic polar group on the phenyl ring

Phenylacetylene (PA) derivatives having two polar groups (ester, 2a – d ; amide, 4) or one cyclic polar group (imide, 5a – c ) were polymerized using (nbd)Rh⁺[(η⁶‐C₆H₅)B^?(C₆H₅)₃] catalyst to afford high molecular weight polymers (～1 × 10⁶ – 4 × 10⁶). The hydrolysis of ester‐containing poly(PA), poly( 2a) , provided poly(3,4‐dicarboxyPA) [poly ( 3 )], which could not be obtained directly by the polymerization of the corresponding monomer. The solubility properties of the present polymers were different from those of poly(PA) having no polar group; that is, poly( 2a )–poly( 2d ) dissolved in ethyl acetate and poly( 4 ) dissolved in N,N‐dimethylformamide, while poly(PA) was insoluble in such solvents. Ester‐group‐containing polymers [poly( 2a )–poly( 2d )] afforded free‐standing membranes by casting from THF solutions. The membrane of poly( 2a ) showed high carbon dioxide permselectivity against nitrogen (PCO₂/PN₂ = 62). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5943–5953, 2006     

Novel pendent thiophene side‐chained benzodithiophene for polymer solar cells

In this article, pendent thiophene (2‐butyl‐5‐octylthiophene) side chain is used to modify the backbone of the polymers containing benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and thieno[3,4‐c]pyrrole‐4,6‐dione (TPD). Compared with the dodecyloxy side‐chained polymer (P1), pendent thiophene‐based polymers (P2 and P3) show similar number‐average molecular weight (M_n), polydispersity index, thermal stability (T_d ～ 334–337 °C), and optical band gaps ( ) (～1.8 eV). Polymer (P2)‐based BDT with pendent thiophene and ethylhexyl‐modified TPD shows relatively low‐lying HOMO energy level (?5.52 eV) and nearly 1 V high open circuit voltage (V_OC). The polymer solar cell devices based on three copolymers show power conversion efficiencies from 2.01% to 4.13%. The hole mobility of these polymers tested by space charge limited current method range from 3.4 × 10^?4 to 9.2 × 10^?4 cm²V^?1s^?1. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1558–1566     

Synthesis and properties of amino acid esters of hydroxypropyl cellulose

The amino acid esters of hydroxypropyl cellulose (HPC) [R′ = H ( 2a ), CH₃ ( 2b ), CH₂CH(CH₃)₂ ( 2c ), CH₂CONH₂ ( 2d ), CH₂CH₂CONH₂ ( 2e ), CH₂CH₂CH₂CH₂ NHOCOC(CH₃)₃ ( 2f )] were synthesized in good yield by the reaction of t‐butoxycarbonyl (t‐Boc)‐protected amino acids with hydroxy groups of HPC ( 1 ; molar substitution (MS), 4.61). The amino acid functionalities displaying varied chemical nature, shape, and bulk were utilized and the bulk of the substituent on the α‐carbon of amino acids was elucidated to be of vital significance for the observed degree of incorporation (DS_Est). The ¹H NMR spectra and elemental analysis were employed to determine the degree of incorporation of amino acid moiety (DS_Est) and almost complete substitution of the hydroxy protons was revealed for 2a , 2b , and 2f . The presence of the peaks characteristic of the carbonyl group in the FTIR spectra furnished further evidence for the successful esterification of HPC. The starting as well as the resulting polymers ( 1 and 2a – f ) were soluble in polar organic solvents; however, the esterification of 1 with bulky organic moieties resulted in an increased hydrophobicity as all of the amino acid‐functionalized polymers ( 2a – f ) were insoluble in water. The onset temperatures of weight loss of 2a – f were 175–230 °C, indicating fair thermal stability. The amino acid functionalization led to the enhanced polymer chain stiffness, and the glass transition temperatures of the derivatized polymers were 30–40 °C higher than that of 1 (T_g 3.9 °C; cf. T_g of 2a – f , 35.1–43.3 °C). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2326–2334, 2008     

Triphenylamine‐based polyimides with trimethyl substituents for gas separation membrane and electrochromic applications

Two series of polyimides I – II with methyl‐substituted triphenylamine units were prepared from the diamines, 4,4′‐diamino‐2″,4″,6″‐trimethyltriphenylamine (Me₃TPA‐diamine; 1 ) and 4,4′‐diamino‐4″‐methyltriphenylamine (MeTPA‐diamine; 2 ), and two commercially available tetracarboxylic dianhydrides via a conventional two‐step chemical imidization. All the polymers were readily soluble in many polar solvents and showed useful levels of thermal stability associated with high glass transition temperatures (266–340 °C) and high char yields (higher than 49% at 800 °C in nitrogen). The polymer films showed reversible electrochemistry/electrochromism accompanied by a color change from neutral pale yellow to green oxidized form with good coloration efficiency, switching time, and stability. The CO₂ permeability coefficients (P_CO2) and permeability selectivity (P_CO2/P_CH4) for these polyimide membranes were in the range of 34.1–229.2 barrer and 21.3–28.9, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Syntheses and gas transport properties of polyarylates based on isophthalic and terephthalic acids and mixtures of bisphenol A and 1, 1 bi‐2‐naphthol

Polyarylates based on isophthalic (IA) and terephthalic (TA) acids and an equimolar mixture of the diols Bisphenol A (BPA) and 1,1 bi‐2‐naphthol (BN) were synthesized to produce BPA‐BN/IA and BPA‐BN/TA polymers and to measure their gas permeability coefficients, P(i), at several pressures and 35 °C, to the gases O₂, N₂, CH₄, and CO₂. For the BPA‐BN/IA membranes, at a 2 atm up‐stream pressure, the P(O₂) and P(CO₂) are 0.93 and 4.0 Barrers with O₂/N₂ and CO₂/CH₄ ideal separation factors of 6.7 and 27. For the BPA‐BN/TA, at a 2 atm up‐stream pressure, the P(O₂) and P(CO₂) are 2.0 and 9.9 Barrers with O₂/N₂ and CO₂/CH₄ ideal separation factors of 5.6 and 21. Comparing the selectivity–permeability balance of properties shown by the BPA/TA membranes with that shown by the copolymer BPA‐BN/TA, the balance moves in the direction of higher selectivity and lower permeability because of the incorporation of BN, which is a more rigid monomer than BPA. However, when the balance of properties for the pair O₂/N₂ shown by BPA‐BN/TA is compared with the one shown by other membranes such as those based on mixtures of diols and diacids, that is the bisphenol A‐naphthalene/I‐T polymers reported in the literature, the balance moves up and to the right of the typical selectivity–permeability trade‐off observed in the BPA‐polyarylate family. Thus, simultaneous incorporations of flexible and rigid monomers in both the diols and the diacids lead to more productive and more selective membranes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 256–263, 2006     

Main chain 1,1′‐ferrocene‐containing polyelectrolytes exhibiting thermotropic liquid‐crystalline and fluorescent properties

A series of 1,1′‐ferrocene‐containing polyelectrolytes ( 3, 4 ) were prepared when 1,1′‐bis(N,N‐dimethylaminomethyl)ferrocene ( 1a ) or 1, 1′‐bis{[1‐(2‐methyl)imidazol‐1‐yl]methyl}ferrocene ( 1b ) was quaternized with 1,4‐dibromobutane or α, α′‐dibromo‐p‐xylene. The counterion was bromide or bis(trifluoromethanesulfonyl)‐amide formed after metathesis with the lithium salt. Their chemical structures were determined by IR and NMR spectra. Molecular weights in the range of ～5400 ( 4a )– ～14,700 ( 4c ) for number‐average molecular weights (M_n) over narrow molecular weight distributions were determined for polymers 4 by gel permeation chromatography. Thermal properties of these materials were obtained by differential scanning calorimetry and thermogravimetric analysis that showed the polymers had thermal stabilities ranging between 172 and 330 °C. Liquid‐crystalline behavior was investigated on a hot stage polarizing optical microscope. Polymers 3a , 4b , and 4d formed either a high‐order or a low‐order smectic phase above their melting or fusion temperatures, and exhibited smectic‐to‐isotropic transitions. The ranges of the liquid‐crystalline phases for these materials were 22, 46, and >55 °C. Compounds 3b , 4a , and 4c are crystalline before melting or decomposing. All of the polymers exhibited absorption bands at ～430 nm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 974–983, 2005     

All‐aromatic liquid crystalline thermosets with high glass transition temperatures

We have synthesized and characterized a new family of low melting all‐aromatic ester‐based liquid crystal oligomers end‐capped with reactive phenylethynyl end groups. In a consecutive, high‐temperature step, the reactive end groups were thermally activated and polymerization was initiated. This reactive oligomer approach allows us to synthesize liquid crystal thermosets with outstanding mechanical and thermal properties, which are superior to well‐known high‐performance polymers such as PPS and PEEK. We have modified an intractable LC formulation based on hydroquinone and terephthalic acid, with M_n = 1000, 5000, and 9000 g mol^?1, and varied the backbone composition using isophthalic acid, resorcinol, 4‐hydroxy‐benzoic acid, 6‐hydroxy‐2‐naphthoic acid, and chlorohydroquinone. All fully cured polymers showed glass transition temperatures in the range of 164–275 °C, and high storage moduli at room temperature (～ 5 GPa) and elevated temperature (～ 2 GPa at 200 °C). All oligomers display nematic mesophases and in most cases, the nematic order is maintained after cure. Rheology experiments showed that the phenylethynyl end group undergoes predominantly chain extension below 340 °C and crosslinking above this temperature. Highly aligned fibers could be spun from the nematic melt, and we found that the order parameter 〈P₂〉 was not affected by the chain extension and crosslink chemistry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1368–1380, 2009     

Novel organosoluble aromatic polyimides bearing pendant methoxy‐substituted triphenylamine moieties: Synthesis,electrochromic, and gas separation properties

Four series of polyimides I – VI with pendent triphenylamine (TPA) units having inherent viscosities of 0.44–0.88 dL/g were prepared from four diamines with two commercially available tetracarboxylic dianhydrides via a conventional two‐step procedure that included a ring‐opening polyaddition to give polyamic acids, followed by chemical cyclodehydration. These polymers were amorphous and could afford flexible films. All the polyimides had useful levels of thermal stability associated with high softening temperatures (279–300 °C), 10% weight‐loss temperatures in excess of 505 °C, and char yields at 800 °C in nitrogen higher than 58%. The hole‐transporting and electrochromic properties were examined by electrochemical and spectroelectrochemical methods. Cyclic voltammograms of the polyimide films cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited a or two reversible oxidation couples at 0.65–0.78 and 1.00–1.08 V versus Ag/AgCl in acetonitrile solution. The polymer films revealed electrochromic characteristics with a color change from neutral pale yellowish to blue doped form at applied potentials ranging from 0.00 to 1.20 V. The CO₂ permeability coefficients (P) and permeability selectivity (P/P) for these polyimide membranes were in the range of 4.73–16.82 barrer and 9.49–51.13, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7937–7949, 2008     

Synthesis and properties of blue light‐emitting,silicon‐containing,regio‐ and stereoregular conjugated polymers

This article concerns the hydrosilylation polyaddition of 1,4‐bis(dimethylsilyl)benzene ( 1 ) with 4,4′‐diethynylbiphenyl, 2,7‐diethynylfluorene ( 2b ), and 2,6‐diethynylnaphthalene with RhI(PPh₃)₃ catalyst. Trans‐rich polymers with weight‐average molecular weights (M_w's) ranging from 19,000 to 25,000 were obtained by polyaddition in o‐Cl₂C₆H₄ at 150–180 °C, whereas cis‐rich polymers with M_w's from 4300 to 34,000 were obtained in toluene at 0 °C–r.t. These polymers emitted blue light in 4–81% quantum yields. The cis polymers isomerized into trans polymers upon UV irradiation, whereas the trans polymers did not. The device having a layer of polymer trans‐ 3b obtained from 1 and 2b demonstrated electroluminescence without any dopant. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2774–2783, 2004     

Poly(arylene ether)s from new biphenols containing imidoarylene and dicyanoarylene moieties

Novel poly(arylene ether)s were synthesized from new biphenol monomers 14–16 1 containing imido‐ or dicyanoarylene groups. The syntheses of these polymers were carried out in tetramethylene sulfone in the presence of anhydrous K₂CO_3, by a nucleophilic substitution condensation between the biphenol and activated difluoro compounds to give high molecular weight polymers. All the polymers have high T_g 's and good thermal stability as determined from DSC and TGA analysis. Inherent viscosities of these polymers are in the range of 0.33–0.63 dL/g. They are amorphous and readily soluble in NMP, DMF, and DMSO. The glass‐transition temperatures of the polymers range from 248–295 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1318–1322, 2000     

Membranes from poly(aryl ether)‐based ionomers containing multiblock segments of randomly distributed nanoclusters of 18 sulfonic acid groups

Multiblock copolymers 1a (M_n = 31,500–47,400) of sulfonated poly(aryl ether)s were synthesized by polycondensation of 4,4′‐difluorobenzophenone (DFBP), bis(4‐hydroxyphenyl)sulfone (BHPS), and an hydroxy‐terminated sulfonated oligomer, which was synthesized from DFBP and 2,2′,3,3′,5,5′‐hexaphenyl‐4,4′‐dihydroxybiphenyl a . The copolymerization of trimeric monomer b with DFBP and BHPS gave a series of copolymers 1b (M_n = 26,200–45,900). The copolymers were then sulfonated with chlorosulfonic acid to give ionomers 3a with hydrophilic multiblock segments and ionomers 3b with segments containing clusters of 18 sulfonic acid groups. The proton exchange membranes cast from ionomers 3a and 3b were characterized with regard to thermal stability, water uptake, proton conductivity, and morphology. Transmission electron microscopy images of 3a‐1 and 3b‐1 revealed a phase separation similar to that of Nafion that may explain their higher proton conductivities compared with randomly sulfonated copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4762–4773, 2009     

Synthesis and properties of carbamate‐ and amine‐containing poly(phenylacetylenes)

The 3‐ and 4‐aminophenylacetylenes protected by t‐butoxycarbonyl (t‐Boc) and 9‐fluorenylmethoxycarbonyl (Fmoc) groups ( 3a – 6a ) were synthesized and polymerized using [(nbd)RhCl]₂ ( 1 ) and [(nbd)Rh⁺‐η⁶‐PhB^?Ph₃] ( 2 ) catalysts. The t‐Boc‐containing polymers [poly( 3a ) and poly( 4a )] were obtained in high yield (82–91%). Among the Fmoc‐protected monomers, the para‐derivative polymerized well [poly( 6a ); yield = 85–94%], whereas its meta‐substituted analogue did not afford high molecular weight polymer in good yield [poly( 5a ); yield = 10–15%]. The use of KN(SiMe₃)₂ as a cocatalyst in conjunction with 1 led to a dramatic increase in the molecular weight of the polymers. The acid‐ and base‐catalyzed removal of the t‐Boc and the Fmoc groups, respectively, generated primary amine‐containing polymers [poly( 3b )–poly( 6b )] which cannot be obtained directly by the polymerization of the corresponding monomers. The solubility characteristics of the polymers bearing protected amino groups were quite different from those of the unprotected ones, the former being soluble in polar solvents, whereas the latter displayed poor solubility even in polar protic or highly polar aprotic solvents. The attempts to accomplish the free‐standing membrane fabrication by solution casting were successful only for poly( 3a ), and an augmentation in the gas permeability and CO₂/N₂ permselectivity was discerned in comparison with the unsubstituted poly(phenylacetylene) and poly(m‐t‐butyldimethylsiloxyphenylacetylene). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1853–1863, 2009     

Synthesis and characterization of soluble,fluorescent poly(arylene ether)s,poly(arylene thioether)s,and poly(arylene sulfone)s containing 1,3,5‐triphenylbenzene segments

The bisphenol 4,4″‐dihydroxy‐5′‐phenyl‐m‐terphenyl ( 4 ), containing a 1,3,5‐triphenylbenzene moiety, was synthesized from a pyrylium salt obtained by the reaction of benzaldehyde with p‐methoxyacetophenone with boron trifluoride etherate as a condensing agent. Polymers were obtained from 4 by a nucleophilic displacement reaction with various activated difluoro monomers and with K₂CO₃ as a base. A series of new poly(arylene ether)s ( 8a – 8f ) were obtained that contained phenyl‐substituted m‐terphenyl segments in the polymer chain. Polymers with inherent viscosities of 0.41–0.99 dL/g were obtained in yields greater than 96%. The polymers were soluble in a variety of organic solvents, including nonpolar solvents such as toluene. Clear, transparent, and flexible films cast from CHCl₃ showed high glass‐transition temperatures (T_g = 198–270 °C) and had excellent thermal stability, as shown by temperatures of 5% weight loss greater than 500 °C. 4 was converted via N,N‐dimethyl‐O‐thiocarbamate into the masked dithiol 4,4″‐bis(N,N′‐dimethyl‐S‐thiocarbamate)‐5′‐phenyl‐m‐terphenyl and was polymerized with activated difluoro compounds in the presence of a mixture of Cs₂CO₃ and CaCO₃ as a base in diphenyl sulfone as a solvent. A series of new poly(arylene thioether)s ( 9a – 9e ) were obtained with T_g values similar to those of 8a – 8e . 9a – 9e were further oxidized into poly(arylene sulfone)s with T_g values 40–80 °C higher than those for 8a – 8e and 9a – 9e . These polymers also had good solubility in organic solvents. A sulfonic acid group was selectively introduced onto the pendent phenyl group of polymers 8a and 8f by reaction with chlorosulfonic acid. The polymers were soluble in dipolar aprotic solvents and formed films via casting from dimethylformamide. Polymers 8a – 8f , 11a , and 11f showed blue and red fluorescence under ultraviolet–visible light with emission maxima at 380–440 nm. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 496–510, 2002; DOI 10.1002/pola.10136     

Amino acid‐functionalized ethyl cellulose: Synthesis,characterization, and gas permeation properties

Amino acid esters of ethyl cellulose [R′ = H ( 1 ), CH₃ ( 2 ), CH₂CH(CH₃)₂ ( 3 ), CH₂CONH₂ ( 4 ), CH₂OCH₂C₆H₅ ( 5 , 5′ ), CH₂CH₂CH₂CH₂NHOCOC(CH₃)₃ ( 6 )] were synthesized in moderate to quantitative yields (30–99%) by the reaction of t‐butoxycarbonyl (t‐Boc)‐protected amino acids or an activated ester derivative with hydroxy groups of ethyl cellulose [EC; degree of substitution (DS_Et), 2.69]. The amino acid functionalities displaying varied chemical nature, shape, and bulk were used, and bulk of the substituent on the α‐carbon of amino acids was elucidated to be of vital significance for the observed degree of incorporation (DS_Est). ¹H NMR spectra were used to determine the degree of incorporation of amino acid moiety (DS_Est), and almost complete substitution of the hydroxy protons was revealed in 1 , 2 , and 5′ . The onset temperatures of weight loss of 1 – 6 were 198–218 °C, indicating fair thermal stability. The glass transition temperatures of the derivatized polymers were 30–40 °C lower than that of EC (T_g 131 °C; cf. T_g of 1 – 6 , 93.5–103 °C). Free‐standing membranes of EC and its amino acid esters ( 1 , 2 , 5 , 5′ , and 6 ) were fabricated, and enhanced permselectivity for CO₂/N₂ and CO₂/CH₄ gas pairs was discerned, when compared with EC. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3986–3993, 2010     

Helical poly(phenylacetylene)s containing schiff‐base and amino groups: Synthesis,secondary structures,and responsiveness to benzoic acid

Novel acetylenic monomers containing Schiff‐base and amino groups, (S)‐N‐(4‐ethynylbenzylidene)‐1‐phenylethanamine ( 1a ), (R)‐N‐(4‐ethynylbenzylidene)‐1‐phenylethanamine ( 1b ), N‐(4‐ethynylbenzylidene)‐1‐phenylethanamine ( 1c ), (R)‐N‐(4‐ethynylbenzyl)‐1‐phenylethanamine ( 1d ), and (R)‐N‐(4‐ethynylbenzyl)‐1‐phenylethanamine ( 1e ) were synthesized and polymerized with [(nbd)RhCl]₂/Et₃N catalyst to afford the corresponding polymers 2a ‐ e with moderate molecular weights (M_n = 9000–60,000) in high yields (85–97%). All the polymers were soluble in common organic solvents including toluene, CHCl₃, CH₂Cl₂, THF, and DMF. Large optical rotations and strong CD signals demonstrated that 2a , 2b , 2d , and 2e take helical structures with a predominantly one‐handed screw sense. The effects of solvents and temperature revealed that these polymers took dynamic helical structure based on the steric effect of side groups. The CD patterns of 2d and 2e containing free amino moieties were completely inverted by the addition of benzoic acid. Upon further addition of NaOH, the CD pattern returned to the original one, indicating the reversible conformational change of these polymers according to pH. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5248–5256     

Synthesis and characterization of novel hyperbranched poly(imide silsesquioxane) membranes

A new family of hyperbranched polymers with chemical bonds between the hyperbranched polyimide and polysilsesquioxane network was synthesized by the reaction of an amine‐terminated aromatic hyperbranched polyimide with 3‐glycidoxypropyl trimethoxysilane, followed by hydrolysis and polycondensation in the presence of an acid catalyst. The hyperbranched poly(imide silsesquioxane) membranes were fabricated by the casting the aforementioned polymer solution onto a NaCl optical flat, which was followed by heating at 80 °C for 24 h. The membranes were characterized by Fourier transform infrared, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy, N₂ adsorption and desorption, and CO₂ adsorption and desorption. The presence of covalent bonds between the hyperbranched polyimide and polysilsesquioxane segments had a significant effect on the properties of the membranes. N₂ adsorption–desorption isotherms for these membranes showed surface areas of 6–16 m²/g, whereas CO₂ adsorption–desorption isotherms showed much higher surface areas in the range of 106–127 m²/g. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3736–3743, 2003     

Enhanced dispersion of nanotubes in organic solvents by donor–acceptor interaction between functionalized poly(phenylacetylene) chains and carbon nanotube walls

Phenylacetylene derivatives containing carbazole ( 1 ) and fluorene ( 2 ) moieties were polymerized by [Rh(nbd)Cl]₂ into corresponding polymers P 1 and P 2 of high molecular weights (M_w ～ 150 × 10³–465 × 10³) in high yields (up to 98%). The polymers were characterized by NMR, IR, UV, PL, and CV techniques. Hybrids of the polymers with multiwalled carbon nanotubes (MWNTs) were prepared by simply mixing the two components in common organic solvents such as dichloromethane. The solvating power of the polymer carrying the electron‐donating carbazolyl pendant (P 1 ) is stronger than that of its counterpart carrying fluorenyl pendant (P 2 ), due to the stronger donor–acceptor (D–A) interaction between the P 1 chains and the MWNT walls. This work clearly manifests that D–A effect plays an important role in the polymer‐aided MWNT dispersion in organic solvents. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4995–5005, 2009     

Azide‐based Cross‐Linking of Polymers of Intrinsic Microporosity (PIMs) for Condensable Gas Separation

Cross‐linked polymers of intrinsic microporosity (PIM)s for gas separation membranes, were prepared by a nitrene reaction from a representative PIM in the presence of two different diazide cross‐linkers. The reaction temperature was optimized using TGA. The homogenous membranes were cast from THF solutions of different ratios of PIM to azides. The resulting cross‐linked structures of the PIMs membranes were formed at 175 °C after 7.5 h and confirmed by TGA, XPS, FT‐IR spectroscopy and gel content analysis. These resulting cross‐linked polymeric membranes showed excellent gas separation performance and can be used for O₂/N₂ and CO₂/N₂ gas pairs, as well as for condensable gases, such as CO₂/CH₄, propylene/propane separation. Most importantly, and differently from typical gas separation membranes derived from glassy polymers, the crosslinked PIMs showed no obvious CO₂ plasticization up to 20 atm pressure of pure CO₂ and CO₂/CH₄ mixtures.

     

Living cationic polymerization of an azide‐containing vinyl ether toward addressable functionalization of polymers

We first achieved the living cationic polymerization of azide‐containing monomer, 2‐azidoethyl vinyl ether (AzVE), with SnCl₄ as a catalyst (activator) in conjunction with the HCl adduct of a vinyl ether [H‐CH₂CH(OR)‐Cl; R ? CH₂CH₂Cl, CH₂CH(CH₃)₂]. Despite the potentially poisoning azide group, the produced polymers possessed controlled molecular weights and fairly narrow distributions (M_w/M_n ～ 1.2) and gave block polymers with 2‐chloroethyl vinyl ether. The pendent azide groups are easily converted into various functional groups via mild and selective reactions, such as the Staudinger reduction and copper‐catalyzed azide‐alkyne 1,3‐cycloaddition (CuAAC; a “click” reaction). These reactions led to quantitative pendent functionalization into primary amine (? NH₂), hydroxy (? OH), and carboxyl (? COOH) groups, at room temperature and without any acidic or basic treatment. Thus, poly(AzVE) is a versatile precursor for a wide variety of functional vinyl ether polymers with well‐defined structures and molecular weights. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1449–1455, 2010