Synthese und Molekülstrukturen von N‐substituierten Diethylgallium‐2‐pyridylmethylamiden

Synthesis and Molekular Structures of N‐substituted Diethylgallium‐2‐pyridylmethylamides (2‐Pyridylmethyl)(tert‐butyldimethylsilyl)amine ( 1a ) and (2‐pyridylmethyl)‐di(tert‐butyl)silylamine ( 1b ) form with triethylgallane the corresponding red adducts 2a and 2b via an additional nitrogen‐gallium bond. These oily compounds decompose during distillation. Heating under reflux in toluene leads to the elimination of ethane and the formation of the red oils of [(2‐pyridylmethyl)(tert‐butyldimethylsilyl)amido]diethylgallane ( 3a ) and [(2‐pyridylmethyl)‐di(tert‐butyl)silylamido]diethylgallane ( 3b ). In order to investigate the thermal stability solvent‐free 3a is heated up to 400 °C. The elimination of ethane is observed again and the C‐C coupling product N, N′‐Bis(diethylgallyl)‐1, 2‐dipyridyl‐1, 2‐bis(tert‐butyldimethylsilyl)amido]ethan ( 4 ) is found in the residue. Substitution of the silyl substituents by another 2‐pyridylmethyl group and the reaction of this bis(2‐pyridylmethyl)amine with GaEt₃ yield triethylgallane‐diethylgallium‐bis(2‐pyridylmethyl)amide ( 5 ). The metalation product adds immediately another equivalent of triethylgallane regardless of the stoichiometry. The reaction of GaEt₃ with 2‐pyridylmethanol gives quantitatively colorless 2‐pyridylmethanolato diethylgallane ( 6 ).     

Syntheses,Crystal Structure and Reactivity of Tin(II) Bis[N‐(diphenylphosphanyl)(2‐pyridylmethyl)amide]

Metallation of N‐(diphenylphosphanyl)(2‐pyridylmethyl)amine with n‐butyllithium in toluene yields lithium N‐(diphenylphosphanyl)(2‐pyridylmethyl)amide ( 1 ), which crystallizes as a tetramer. Transamination of N‐(diphenylphosphanyl)(2‐pyridylmethyl)amine with an equimolar amount of Sn[N(SiMe₃)₂]₂ leads to the formation of monomeric bis(trimethylsilyl)amido tin(II) N‐(diphenylphosphanyl)(2‐pyridylmethyl)amide ( 2 ). The addition of another equivalent of N‐(diphenylphosphanyl)(2‐pyridylmethyl)amine gives homoleptic tin(II) bis[N‐(diphenylphosphanyl)(2‐pyridylmethyl)amide] ( 3 ). In these complexes the N‐(diphenylphosphanyl)(2‐pyridylmethyl)amido groups act as bidentate bases through the nitrogen bases. At elevated temperatures HN(SiMe₃)₂ is liberated from bis(trimethylsilyl)amido tin(II) N‐(diphenylphosphanyl)(2‐pyridylmethyl)amide ( 2 ) yielding mononuclear tin(II) 1,2‐dipyridyl‐1,2‐bis(diphenylphosphanylamido)ethane ( 4 ) through a C–C coupling reaction. The three‐coordinate tin(II) atoms of 2 and 4 adopt trigonal pyramidal coordination spheres.     

Oxidative C‐C Coupling of Dilithium (2‐Pyridylmethanidyl)(tert‐butyldimethylsilyl)amide with White Phosphorus

(2‐Pyridylmethyl)(tert‐butyldimethylsilyl)amine ( 1 ) can be lithiated once or twice yielding lithium (2‐pyridylmethyl)(tert‐butyldimethylsilyl)amide ( 2 ) and dilithium (2‐pyridylmethanidyl)(tert‐butyldimethylsilyl)amide ( 3 ), respectively. The oxidation of 3 with white phosphorus yields dilithium 1,2‐dipyridyl‐1,2‐bis(tert‐butyldimethylsilylamido)ethane ( 4 ) which crystallizes after partial hydrolysis as an adduct of the form 2 · 4 .     

Synthesis and Crystal Structure of [Methylzinc(2‐Pyridylethyl)(tert‐butyldimethylsilyl)amide] and its Hydrolysis Product

The metallation of (2‐pyridylethyl)(tert‐butyldimethylsilyl)amine ( 1 ) with dimethylzinc yields quantitatively dimeric methylzinc (2‐pyridylethyl)(tert‐butyldimethylsilyl)amide ( 2 ). Hydrolysis reactions lead to the precipitation of trakis(methylzinc) bis{2‐pyridylethyl)(tert‐butyldimethylsilyl}amide](μ₄‐oxide)] ( 3 ).     

Synthese eines hexanuklearen Calcium–Phosphor‐Käfigs über heteroleptische Calcium‐amid‐phosphanid‐Vorstufen

Synthesis of a Hexanuclear Calcium–Phosphorus‐Cage The metalation of tri(tert‐butyl)silylphosphane with calcium bis[bis(trimethylsilyl)amide] yields the dimer {(Me₃Si)₂N–Ca(THF)[μ‐P(H)Si^tBu₃]}₂ ( 1 ). In THF monomerization occurs and dismutation reactions lead to the homoleptic compounds, namely (THF)₂Ca[N(SiMe₃)₂]₂ and (THF)₄Ca[P(H)Si^tBu₃]₂. In toluene, 1 undergoes dismutation reactions, bis(tetrahydrofuran)calcium bis[bis(trimethylsilyl)amide] is regained and [(Me₃Si)₂N–Ca(THF)]₂Ca[P(H)Si^tBu₃]₄ ( 2 ) precipitates. At raised temperatures, 2 undergoes a homometallic metalation with the loss of two equivalents of HN(SiMe₃)₂ and dimerizes. The thus formed cage compound (THF)₂Ca₆[PSi^tBu₃]₄[P(H)Si^tBu₃]₄ ( 3 ) with a central Ca₄P₄ heterocubane moiety crystallizes upon cooling of the toluene solution. The molecular structures of 2 and 3 were determined.     

Kristallstrukturen und spektroskopische Eigenschaften von 2λ3‐Phospha‐1, 3‐dionaten und 1, 3‐Dionaten des Calciums ‐ ein Vergleich am Beispiel der 1, 3‐Diphenyl‐ und 1, 3‐Di(tert‐butyl)‐Derivate

Crystal Structures and Spectroscopic Properties of 2λ³‐Phospha‐1, 3‐dionates and 1, 3‐Dionates of Calcium ‐ Comparative Studies on the 1, 3‐Diphenyl and 1, 3‐Di(tert‐butyl) Derivatives A hydrogen‐metal exchange between dibenzoylphosphane and calcium carbide in tetrahydrofuran (THF) followed by addition of the ligand 1, 3, 5‐trimethyl‐1, 3, 5‐triazinane (TMTA) furnishes the binuclear complex bis[(tmta‐N, N′, N″)calcium bis(dibenzoylphosphanide)] ( 1a ) co‐crystallizing with benzene. Similarly, reaction of bis(2, 2‐dimethylpropionyl)phosphane with bis(thf‐O)calcium bis[bis(trimethylsilyl)amide] in 1, 2‐dimethoxyethane (DME) gives bis(dme‐O, O′)calcium bis[bis(2, 2‐dimethylpropionyl)phosphanide] ( 1b ) in high yield. The carbon analogues 1, 3‐diphenylpropane‐1, 3‐dione (dibenzoylmethane) or 2, 2, 6, 6‐tetramethylheptane‐3, 5‐dione (dipivaloylmethane) and bis(thf‐O)calcium bis[tris(trimethylsilylmethyl)zincate] in DME afford bis(dme‐O, O′)calcium bis(dibenzoylmethanide) ( 2a ) and the binuclear complex (μ‐dme‐O, O′)bis[(dme‐O, O′)calcium bis(dipivaloylmethanide)] ( 2b ), respectively. Dialkylzinc formed during the metalation reaction shows no reactivity towards the 1, 3‐dionates 2a and 2b . Finally, from the reaction of the unsymmetrically substituted ligand 2‐(methoxycarbonyl)cyclopentanone and bis(thf‐O)calcium bis[bis(trimethylsilyl)amide] in toluene, the trinuclear complex 3 is obtained, co‐crystallizing with THF. The β‐ketoester anion bridges solely via the cyclopentanone unit.     

Synthese und Strukturen von Yttrium‐tris[bis(trimethylsilyl)phosphanid] und 1, 1', 3, 3'‐Tetrakis(trimethylsilyl)yttrocen‐tri(tert‐butyl)silylphosphanid

The metalation of HP(SiMe₃)₂ with Y[CH(SiMe₃)₂]₃ gives the homoleptic {Y[P(SiMe₃)₂]₃}₂ (1) which crystallizes from toluene in the monoclinic space group P2₁/c. The yttrium atoms are in a distorted tetrahedral environment with Y‐P bond lengths of 267.7 and 284.8 pm to the terminal and bridging substituents, respectively. The metathesis reaction of [1, 3‐(Me₃Si)₂C₅H₃]₂YCl with KPSitBu₃ yields (tetrahydrofuran‐O)‐1, 1', 3, 3'‐tetrakis(trimethylsilyl)yttrocene‐tri(tert‐butyl)silylphosphanide ( 2 ). The molecular structure of 2 in solution was deduced by NMR spectroscopy and X‐ray crystallography. The coupling constants ¹J(Y, P) and ¹J(P, H) show values of 144.0 Hz and 201.0 Hz, respectively.     

Synthese,spektroskopische Charakterisierung und Molekülstrukturen ausgewählter Lewis‐Basen‐Addukte der Alkalimetall‐tri(tert‐butyl)silylphosphanide

Synthesis, Spectroscopic Characterization, and Molecular Structures of Selected Lewis‐Base Adducts of the Alkali Metal Tri(tert‐butyl)silylphosphanides The metalation of tri(tert‐butyl)silylphosphane with butyllithium and the bis(trimethylsilyl)amides of sodium, potassium, and rubidium yields quantitatively the corresponding alkali metal tri(tert‐butyl)silylphosphanides, which crystallize after addition of appropriate Lewis‐bases as dimeric (DME)LiP(H)SitBu₃ ( 1 ), chain‐like (DME)NaP(H)SitBu₃ ( 2 ), monomeric ([18]Krone‐6)KP(H)SitBu₃ ( 3 ), and dimeric (TMEDA)_1.5RbP(H)SitBu₃ ( 4 ). The reaction of H₂PSitBu₃ with cesium bis(trimethylsilyl)amide at room temperature gives monocyclic and tetrameric cesium tri(tert‐butyl)silylphosphanide ( 5 ) with two additional coordinated CsN(SiMe₃)₂ molecules. At 80 °C this complex reacts with excess of phosphane to the tetrameric toluene adduct (η⁶‐Toluol)CsP(H)SitBu₃ ( 6 ) which contains a central Cs₄P₄‐heterocubane fragment. The constitution of these compounds was verified by X‐ray structure determinations.     

Synthese und Charakterisierung heterobimetallischer Bis(trimethylsilyl)phosphanide von Barium und Zinn

Synthesis and Characterization of Hetero-bimetallic Bis(trimethylsilyl)phosphanides of Barium and Tin The reaction of barium bis[bis(trimethylsilyl)amide] with one equivalent of bis(trimethylsilyl)phosphane in 1,2-dimethoxyethane (dme) yields the heteroleptic dimeric (dme)barium bis(trimethylsilyl)amide bis(trimethylsilyl)phosphanide. This colorless compound crystallizes in the monoclinic space group P2₁/n with a = 1 259.1(3), b = 1 822.7(4), c = 1 516.1(3) pm, β = 110.54(3)° and Z = 4. The central moiety of the centrosymmetric molecule is the planar Ba₂P₂-cycle with Ba? P-bond lengths of 329 and 334 pm. In the presence of bis[bis(trimethylsilyl)amino]stannylene hetero-bimetallic bis(trimethylsilyl)phosphanides of tin(II) and barium are isolated. If the reaction of Ba[N(SiMe₃)₂]₂ and Sn[N(SiMe₃)₂]₂ in the molar ratio of 1:2 with six equivalents of HP(SiMe₃)₂ is performed in toluene, barium bis{tin(II)-tris[bis(trimethylsilyl)phosphanide]} can be isolated. This compound crystallizes in the orthorhombic space group P2₁2₁2₁ with a = 1 265.1(1), b = 2 290.1(3), c = 2 731.9(3) pm and Z = 4. The anions {Sn[P(SiMe₃)₂]₃}^? bind as two-dentate ligands to the barium atom which shows the extraordinary low coordination number of four. The addition of tetrahydrofuran (thf) to the above mentioned reaction solution leads to the elimination of tris(trimethylsilyl)phosphane and the formation of thf complexes of barium bis{tin(II)-bis(trimethylsilyl)phosphanide-trimethylsilylphosphandiide}. The derivative crystallizes from toluene in the monoclinic space group P2₁/c with a = 1 301.9(2), b = 2 316.3(3), c = 3 968.7(5) pm, β = 99.29(1)° and Z = 8.     

Aufbau von Trimethylsilyl-substituierten Polyedern aus Calcium,Zinn(II) und Phosphor

Synthesis of Trimethylsilyl Substituted Polyhedra of Calcium, Tin(II), and Phosphorus The reaction of calcium-bis[bis(trimethylsilyl)amide] with bis(trimethylsilyl)phosphane in thf yields the heteroleptic, dimeric (tetrahydrofuran-O)calcium-bis(trimethylsilyl)amidebis(trimethylsilyl)phosphanide 1 (triclinic, P 1 , a = 1066,6(2), b = 1141,3(2), c = 1226,6(2)pm, α = 97,78(3)°, β = 107,47(3)°, γ = 101,12(3)°, Z = 1 dimer). The bridging phosphanide-substituent displays with Ca? P bond lengths of 292,6 and 300,5 pm a distortion of the four-membered Ca₂P₂-cycle. The reaction with another equivalent of HP(SiMe₃)₂ in thf leads to the formation of tetrakis(tetrahydrofuran-O)calcium-bis[bis(trimethylsilyl)phosphanide] 2 mit Ca? P distances of 292 pm (monoclinic, P2₁/c, a = 1626,0(3), b = 1295,3(4), c = 2039,5(5) pm, β = 102,60(2)°, Z = 4). The performance of the reaction in the presence of bis[bis(trimethylsilyl)amino]stannylene yields heterobimetallic compounds with a central polyhedron of Ca-, Sn- and P-atoms. Dependent on the Sn/Ca ratio the isolation of tris(trimethylsilyl)phosphane as well as bis[tris(tetrahydrofuran-O)calcium]-ditin(II)-tetrakis(μ₃-trimethylsilylphosphandiide) 3 with a central dicalcia-distanna-tetraphosphacubane-fragment or (thf)₂CaSn₂[μ-P(SiMe₃)₂]₂[μ₃-PSiMe₃]₂ 4 (orthorhombic, Pnma, a = 2247,7(2), b = 1868,9(1), c = 1168,0(1) pm, Z = 4), respectively, succeeds. The Ca? P distances lie at 291 pm.     

Dinuclear Rare‐Earth Metal Alkyl Complexes Supported by Indolyl Ligands in μ‐η2:η1:η1 Hapticities and their High Catalytic Activity for Isoprene 1,4‐cis‐Polymerization

Two series of new dinuclear rare‐earth metal alkyl complexes supported by indolyl ligands in novel μ‐η²:η¹:η¹ hapticities are synthesized and characterized. Treatment of [RE(CH₂SiMe₃)₃(thf)₂] with 1 equivalent of 3‐(tBuN?CH)C₈H₅NH ( L₁ ) in THF gives the dinuclear rare‐earth metal alkyl complexes trans‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH(CH₂SiMe₃)}Ind)RE(thf)(CH₂SiMe₃)]₂ (Ind=indolyl, RE=Y, Dy, or Yb) in good yields. In the process, the indole unit of L₁ is deprotonated by the metal alkyl species and the imino C?N group is transferred to the amido group by alkyl CH₂SiMe₃ insertion, affording a new dianionic ligand that bridges two metal alkyl units in μ‐η²:η¹:η¹ bonding modes, forming the dinuclear rare‐earth metal alkyl complexes. When L₁ is reduced to 3‐(tBuNHCH₂)C₈H₅NH ( L₂ ), the reaction of [Yb(CH₂SiMe₃)₃(thf)₂] with 1 equivalent of L₂ in THF, interestingly, generated the trans‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH₂}Ind)Yb(thf)(CH₂SiMe₃)]₂ (major) and cis‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH₂}Ind)Yb(thf)(CH₂SiMe₃)]₂ (minor) complexes. The catalytic activities of these dinuclear rare‐earth metal alkyl complexes for isoprene polymerization were investigated; the yttrium and dysprosium complexes exhibited high catalytic activities and high regio‐ and stereoselectivities for isoprene 1,4‐cis‐polymerization.     

Synthesis and Characterization of Methylzinc Tri(tert‐butyl)silylphosphanide as well as Related Sodium and Potassium Phosphanylzincates

The reaction of dimethylzinc and tri(tert‐butyl)silylphosphane in toluene yielded dimeric methylzinc tri(tert‐butyl)silylphosphanide ( 1 ) which crystallized tetrameric. Compound 1 was deprotonated with sodium in DME and the solvent‐separated dimeric ion pair [(dme)₃Na]⁺ [(dme)Na(MeZn)₂(μ‐PSitBu₃)₂]^? ( 2 ) was isolated. The reaction of 1 in THF with two equivalents of potassium and one equivalent of tri(tert‐butyl)silylphosphane gave dimeric [{tBu₃Si(H)P}{(thf)₂K}₂(MeZn)(PSitBu₃)]₂ ( 3 ). Both of these phosphanylzincates contain Zn₂P₂ cycles with Zn‐P bond lengths of approximately 237 pm, whereas in 1 larger Zn‐P bond lengths of 248.5 pm were found due to the larger coordination numbers of the phosphorus and zinc atoms.     

Biomimetic Interaction between FeII and O2: Effect of the Second Coordination Sphere on O2 Binding to FeII Complexes: Evidence of Coordination at the Metal Centre by a Dissociative Mechanism in the Formation of μ‐Oxo Diferric Complexes

We report that the formation of μ‐oxo diferric compounds from O₂ and FeCl₂ complexes within the tris(2‐pyridylmethyl)amine series (N. K. Thallaj et al. Chem. Eur. J., 2008 , 14, 6742–6753) involves coordination of O₂ to the metal centre and that this reaction occurs following initial dissociation of the bound equatorial chloride anion. We also report evidence of the formation of a reduced form of dioxygen by an inner‐sphere mechanism, thus leading to modification of the ligand. The solid‐state structures of [FeCl₂L] complexes (L¹=mono(α‐pivalamidopyridylmethyl)bis(2‐pyridylmethyl)amine, L²=mono(α‐pivalesteropyridylmethyl)bis(2‐pyridylmethyl)amine, L³=bis(α‐pivalamidopyridylmethyl)mono(2‐pyridylmethyl)amine are described, and spectroscopic data support the structural retention in solution. In [FeCl₂L³], the two amide hydrogen atoms stabilise the equatorial chloride anion in such a way that its exchange by a weak ligand is impossible: [FeCl₂L³] is perfectly oxygen‐stable. In [FeCl₂L²], the equatorial chloride anion is completely free to move and coordination of O₂ can take place. The reaction product with [FeCl₂L²] is a μ‐oxo diferric complex in which the ester function has been transformed into a phenol group. This conversion can be seen as a hydrolysis reaction in basic medium, hence supporting the initial formation of a reduced form of dioxygen in the medium. Complex [FeCl₂L¹] exhibits a very weak reactivity with O₂, in line with a semistabilised equatorial chloride counteranion.     

Cyclohydroamination of Aminoalkenes Catalyzed by Disilazide Alkaline‐Earth Metal Complexes: Reactivity Patterns and Deactivation Pathways

The behavior of the first aminophenolate catalysts of the large alkaline earth metals (Ae) [(LOⁱ)AeN(SiMe₂R)₂(thf)_x] (i=1–4; Ae=Ca, Sr, Ba; R=H, Me; x=0–2) for the cyclohydroamination of terminal aminoalkenes is discussed. The complexes [(BDI)AeN(SiMe₂H)₂(thf)_x] (Ae=Ca, Sr, Ba, x=1–2; (BDI)H=H₂C[C(Me)N‐2,6‐(iPr)₂C₆H₃]₂)) and [(BDI)CaN(SiMe₃)₂(thf)] supported by the β‐diketiminate (BDI)^? ligand have also been employed for comparative and mechanistic considerations. The catalytic performances decrease in the order Ca>Sr?Ba, which is the opposite trend to that previously observed during the intermolecular hydroamination of activated alkenes catalyzed by the same alkaline‐earth metal complexes. Catalyst efficacy increases when the chelating and donating ability of the aminophenolate ligands decreases. For given metals and ancillary scaffolds, disilazide catalysts that incorporate the N(SiMe₃)₂^? amido group outclass their congeners containing the N(SiMe₂H)₂^? amide owing to the lower basicity of the N(SiMe₂H)₂^? with respect to the N(SiMe₃)₂^? group, and also because Ae–N(SiMe₂H)₂ catalysts suffer from irreversible deactivation through the dehydrogenative coupling of amine and hydrosilane moieties. This deactivation process takes place at 25 °C in the case of [(LOⁱ)AeN(SiMe₂H)₂(thf)_x] phenolate complexes and occurs even with the related [(BDI)AeN(SiMe₂H)₂(thf)_x] complex, albeit under conditions harsher than those required for effective cyclohydroamination catalysis. A mechanistic scenario for cyclohydroamination catalyzed by [(LX)AeN(SiMe₂H)₂(thf)_x] complexes ((LX)^?=(LOⁱ)^? or (BDI)^?) is proposed. Although beneficial for the synthesis of Ae heteroleptic complexes able to resist deleterious Schlenk‐type equilibria, the use of the N(SiMe₂H)₂^? is prejudicial to catalytic activity in the case of catalyzed transformations that involve reactive amine (and potentially other) substrates. Mechanistic and kinetic investigations further illustrate the interplay between the catalytic activity, operative mechanism, and identity of the metal, ancillary ligand, and amido group. These studies suggest that the widely accepted mechanism for cyclohydroamination reactions cannot be extended systematically to all alkaline‐earth catalysts. The [(BDI)CaN(SiMe₂H)₂{H₂NCH₂C(CH₃)₂CH₂CH?CH₂}₂] complex, the first Ca–aminoalkene adduct structurally characterized, was prepared quantitatively and essentially behaves like [(BDI)CaN(SiMe₂H)(thf)], thus serving as a model compound for mechanistic studies, as illustrated during stoichiometric reactions monitored by ¹H NMR spectroscopy.     

Transmetallierung von Zinn(II) in [Sn(μ3‐PSitBu3)]4 durch Barium – von Sn4P4‐Heterocuban‐Strukturen zu heterobinuklearen Käfigverbindungen mit einem zentralen BanSn4−nP4‐Heterocuban‐Polyeder (n = 1, 2 und 3)

Transmetallation of Tin(II) in [Sn(μ₃‐PSitBu₃)]₄ by Barium – from Sn₄P₄ Heterocubane Structures to Heterobinuclear Cage Compounds with a Central Ba_nSn_4?nP₄ Heterocubane Polyhedron (n = 1, 2 and 3) For the preparation of compounds of the type [Ba_nSn_4?n(PSitBu₃)₄] (n = 1 ( 2 ), 2 ( 3 ) and 3 ( 4 )) two synthetic routes are applicable: in the transmetallation reaction homometallic [Sn₄(PSitBu₃)₄] ( 1 ) reacts with barium metal and in a deprotonation reaction (metallation) tri(tert‐butyl)silylphosphane reacts simultaneously with (thf)₂Ba[N(SiMe₃)₂]₂ and Sn[N(SiMe₃)₂]₂. During the transmetallation reaction mixtures of the heterobimetallic cage compounds 2 to 4 are obtained, however, analytically pure compounds 2 and 3 are accessible by the metallation reaction. Compound 4 is formed as a minor product together with 3 . Due to the larger Ba‐P bond lengths compared to the Sn‐P values the substitution of tin by barium leads to strong distortions of the heterocubane moiety. With NMR‐spectroscopic experiments one could show that all the above mentioned compounds form Ba_nSn_4?nP₄ heterocubane cage structures.     

Phosphorus‐Stabilized Titanium Carbene Complexes: Synthesis,Reactivity and DFT Studies

The synthesis of two novel titanium carbene complexes from the bis(thiophosphinoyl)methanediide geminal dianion 1 (SCS^2?) is described. Dianion 1 reacts cleanly with 0.5 equivalents of [TiCl₄(thf)₂] to afford the bis‐carbene complex [(SCS)₂Ti] ( 2 ) in 86 % yield. The mono‐carbene complex [(SCS)TiCl₂(thf)] ( 3 ) can also be obtained by using an excess of [TiCl₄(thf)₂]. The structures of 2 and 3 are confirmed by X‐ray crystallography. A strong nucleophilic reactivity towards various electrophiles (ketones and aldehydes) is observed. The reaction of 3 with N,N′‐dicyclohexylcarbodiimide (DCC) and phenyl isocyanate leads to the formation of two novel diphosphinoketenimines 8 a and 8 b . The bis‐titanium guanidinate complex 9 is trapped as the by‐product of the reaction with DCC. The X‐ray crystal structures of 8 a and 9 are presented. The mechanism of the reaction between complex 3 and DCC is rationalized by DFT studies.     

Borane and Borohydride Complexes of the Rare‐Earth Elements: Synthesis,Structures, and Butadiene Polymerization Catalysis

The reaction of potassium 2,5‐bis[N‐(2,6‐diisopropylphenyl)iminomethyl]pyrrolyl [(dip₂‐pyr)K] with the borohydrides of the larger rare‐earth metals, [Ln(BH₄)₃(thf)₃] (Ln=La, Nd), afforded the expected products [Ln(BH₄)₂(dip₂‐pyr)(thf)₂]. As usual, the trisborohydrides reacted like pseudohalide compounds forming KBH₄ as a by‐product. To compare the reactivity with the analogous halides, the dimeric neodymium complex [NdCl₂(dip₂‐pyr)(thf)]₂ was prepared by reaction of [(dip₂‐pyr)K] with anhydrous NdCl₃. Reaction of [(dip₂‐pyr)K] with the borohydrides of the smaller rare‐earth metals, [Sc(BH₄)₃(thf)₂] and [Lu(BH₄)₃(thf)₃], resulted in a redox reaction of the BH₄^? group with one of the Schiff base functions of the ligand. In the resulting products, [Ln(BH₄){(dip)(dip‐BH₃)‐pyr}(thf)₂] (Ln=Sc, Lu), a dinegatively charged ligand with a new amido function, a Schiff base, and the pyrrolyl function is bound to the metal atom. The by‐product of the reaction of the BH₄^? anion with the Schiff base function (a BH₃ molecule) is trapped in a unique reaction mode in the coordination sphere of the metal complex. The BH₃ molecule coordinates in an η² fashion to the metal atom. The rare‐earth‐metal atoms are surrounded by the η²‐coordinated BH₃ molecule, the η³‐coordinated BH₄^? anion, two THF molecules, and the nitrogen atoms from the Schiff base and the pyrrolyl function. All new compounds were characterized by single‐crystal X‐ray diffraction. Low‐temperature X‐ray diffraction data at 6 K were collected to locate the hydrogen atoms of [Lu(BH₄){(dip)(dip‐BH₃)‐pyr}(thf)₂]. The (DIP₂‐pyr)^? borohydride and chloride complexes of neodymium, [Nd(BH₄)₂(dip₂‐pyr)(thf)₂] and [NdCl₂(dip₂‐pyr)(thf)]₂, were also used as Ziegler–Natta catalysts for the polymerization of 1,3‐butadiene to yield poly(cis‐1,4‐butadiene). Very high activities and good cis selectivities were observed by using each of these complexes as a catalyst in the presence of various cocatalyst mixtures.     

Synthesis and Molecular Structure of a Tripodal Triaminostibine

Reaction of the tripodal trilithium triamide [MeSi{SiMe₂N(Li)(p‐Tol)}₃(thf)₂] ( 1 ) with SbCl₃ in toluene gave the corresponding triaminostibine [MeSi{SiMe₂N(p‐Tol)}₃Sb] ( 2 ) in good yield. Its [2,2,2]bicyclooctane‐related cage structure, comprising the trisilylsilane unit and the triamidostibine fragment, was established by a single crystal X‐ray structure analysis: Space group P1, Z = 2, lattice dimensions at 293 K: a = 8.645(4), b = 10.029(5), c = 19.678(9) Å, α = 98.50(3)°, β = 97.46(3)°, γ = 94.80(3)°, R = 0.0216.     

Synthese und Struktur des tetrameren Tris(trimethylsilyl)silylindium(I) und neuer silylsubstituierter Indiumverbindungen

Synthesis and Structure of Tetrameric Tris(trimethylsilyl)indium(I) and of New Silyl substituted Indium Compounds The reaction of InCp* with [LiSi(SiMe₃)₃·3thf] yielded in the first silylsubstituted tetrahedrane of indium [In₄{Si(SiMe₃)₃}₄] ( 1 ). It crystallizes together with [In{Si(SiMe₃)₃}₃] ( 2 ) in dark green crystals. Colourless crystals of [Li(OH)(OSiMe₃)In{Si(SiMe₃)₃}₂]₂ ( 3 ) were isolated as a byproduct from this reaction. It's structural core are three connected four membered rings made up of In‐, Li‐ and O‐atoms. From the reaction of [InOSO₂CF₃] with [LiSi(SiMe₃)₃·3thf] colourless crystals of [In{Si(SiMe₃)₃}₂OSO₂CF₃·thf] ( 4 ) were isolated. InCp* reacted with [LiSiMe(SiMe₃)₂·3thf] to form the orange‐coloured monoindane [In{SiMe(SiMe₃)₂}₃] ( 5 ). 1 – 4 were characterized by X‐ray crystal structure analyses.     

Chiral Benzamidinate Ligands in Rare‐Earth‐Metal Coordination Chemistry

The treatment of the recently reported potassium salt (S)‐N,N′‐bis‐(1‐phenylethyl)benzamidinate ((S)‐KPEBA) and its racemic isomer (rac‐KPEBA) with anhydrous lanthanide trichlorides (Ln=Sm, Er, Yb, Lu) afforded mostly chiral complexes. The tris(amidinate) complex [{(S)‐PEBA}₃Sm], bis(amidinate) complexes [{Ln(PEBA)₂(μ‐Cl)}₂] (Ln=Sm, Er, Yb, Lu), and mono(amidinate) compounds [Ln(PEBA)(Cl)₂(thf)_n] (Ln=Sm, Yb, Lu) were isolated and structurally characterized. As a result of steric effects, the homoleptic 3:1 complexes of the smaller lanthanide atoms Yb and Lu were not accessible. Furthermore, chiral bis(amidinate)–amido complexes [{(S)‐PEBA}₂Ln{N(SiMe₃)₂}] (Ln=Y, Lu) were synthesized by an amine‐elimination reaction and salt metathesis. All of these chiral bis‐ and tris(amidinate) complexes had additional axial chirality and they all crystallized as diastereomerically pure compounds. By using rac‐PEBA as a ligand, an achiral meso arrangement of the ligands was observed. The catalytic activities and enantioselectivities of [{(S)‐PEBA}₂Ln{N(SiMe₃)₂}] (Ln=Y, Lu) were investigated in hydroamination/cyclization reactions. A clear dependence of the rate of reaction and enantioselectivity on the ionic radius was observed, which showed higher reaction rates but poorer enantioselectivities for the yttrium compound.