Simultaneous δ15N, δ13C and δ34S measurements of low‐biomass samples using a technically advanced high sensitivity elemental analyzer connected to an isotope ratio mass spectrometer

Conventional simultaneous CNS stable isotope abundance measurements of solid samples usually require high sample amounts, up to 1 mg carbon, to achieve exact analytical results. This rarely used application is often impaired by high C:S element ratios when organic samples are analyzed and problems such as incomplete conversion into sulphur dioxide occur during analysis. We introduce, as a technical innovation, a high sensitivity elemental analyzer coupled to a conventional isotope ratio mass spectrometer, with which CNS‐stable isotope ratios can be determined simultaneously in samples with low carbon content (<40 µg C corresponding to ～100 µg dry weight). The system includes downsized reactors, a temperature program‐controlled gas chromatography (GC) column and a cryogenic trap to collect small amounts of sulphur dioxide. This modified application allows for highly sensitive measurements in a fully automated operation with standard deviations better than ±0.47‰ for δ¹⁵N and δ³⁴S and ±0.12‰ for δ¹³C (n = 127). Samples collected from one sampling site in a Baltic fjord within a short time period were measured with the new system to get a first impression of triple stable isotope signatures. The results confirm the potential of using δ³⁴S as a stable isotope tracer in combination with δ¹⁵N and δ¹³C measurements to improve discrimination of food sources in aquatic food webs. Copyright © 2009 John Wiley & Sons, Ltd.     

Nicotine,acetanilide and urea multi‐level 2H‐, 13C‐ and 15N‐abundance reference materials for continuous‐flow isotope ratio mass spectrometry

Accurate determinations of stable isotope ratios require a calibration using at least two reference materials with different isotopic compositions to anchor the isotopic scale and compensate for differences in machine slope. Ideally, the δ values of these reference materials should bracket the isotopic range of samples with unknown δ values. While the practice of analyzing two isotopically distinct reference materials is common for water (VSMOW‐SLAP) and carbonates (NBS 19 and L‐SVEC), the lack of widely available organic reference materials with distinct isotopic composition has hindered the practice when analyzing organic materials by elemental analysis/isotope ratio mass spectrometry (EA‐IRMS). At present only L‐glutamic acids USGS40 and USGS41 satisfy these requirements for δ¹³C and δ¹⁵N, with the limitation that L‐glutamic acid is not suitable for analysis by gas chromatography (GC). We describe the development and quality testing of (i) four nicotine laboratory reference materials for on‐line (i.e. continuous flow) hydrogen reductive gas chromatography‐isotope ratio mass‐spectrometry (GC‐IRMS), (ii) five nicotines for oxidative C, N gas chromatography‐combustion‐isotope ratio mass‐spectrometry (GC‐C‐IRMS, or GC‐IRMS), and (iii) also three acetanilide and three urea reference materials for on‐line oxidative EA‐IRMS for C and N. Isotopic off‐line calibration against international stable isotope measurement standards at Indiana University adhered to the ‘principle of identical treatment’. The new reference materials cover the following isotopic ranges: δ²H_nicotine ?162 to ?45‰, δ¹³C_nicotine ?30.05 to +7.72‰, δ¹⁵N_nicotine ?6.03 to +33.62‰; δ¹⁵N_acetanilide +1.18 to +40.57‰; δ¹³C_urea ?34.13 to +11.71‰, δ¹⁵N_urea +0.26 to +40.61‰ (recommended δ values refer to calibration with NBS 19, L‐SVEC, IAEA‐N‐1, and IAEA‐N‐2). Nicotines fill a gap as the first organic nitrogen stable isotope reference materials for GC‐IRMS that are available with different δ¹⁵N values. Comparative δ¹³C and δ¹⁵N on‐line EA‐IRMS data from 14 volunteering laboratories document the usefulness and reliability of acetanilides and ureas as EA‐IRMS reference materials. Published in 2009 by John Wiley & Sons, Ltd.     

A simple rapid method to precisely determine 13C/12C ratios of plant methoxyl groups

Stable isotope ratios of individual plant components have become a valuable tool for the determination of the geographical origin and authenticity of foodstuff. A recently published method with considerable potential in this context is the measurement of the deuterium/hydrogen (D/H) isotope ratios of plant matter methoxyl groups. The method entailed cleavage of methyl ethers or esters with hydriodic acid (HI) to form gaseous methyl iodide (CH₃I) and then measurement of the δ²H value of this gas. Here, as a follow up to a previous study, we describe a method for the rapid and precise δ¹³C analysis of plant matter methoxyl groups using gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS). Conditions for sample preparation were investigated for isotope discrimination effects, the GC conditions optimized, the reproducibility of the measurement of standards undertaken, and the precision of the method defined. The reproducibility of the δ¹³C value determined for a CH₃I standard on 20 consecutive measurements was found to be 0.17‰. The method was also tested on four methoxyl‐rich plant components: vanillin, lignin, wood and pectin. The analytical precision obtained, expressed as the average standard deviation, for these compounds was found to be better than 0.13‰. The described procedure which is simple and rapid, allowing preparation and analysis of a sample within 1 h, produces accurate and reproducible isotopic measurements. We suggest that this validated δ¹³C method when employed together with the recently published δ²H method for two‐dimensional stable isotope studies of organic matter containing methoxyl groups will be of considerable value, e.g. for proving the authenticity of foodstuff. Copyright © 2009 John Wiley & Sons, Ltd.     

Laser ablation isotope ratio mass spectrometry for enhanced sensitivity and spatial resolution in stable isotope analysis

Stable isotope analysis permits the tracking of physical, chemical, and biological reactions and source materials at a wide variety of spatial scales. We present a laser ablation isotope ratio mass spectrometry (LA‐IRMS) method that enables δ¹³C measurement of solid samples at 50 µm spatial resolution. The method does not require sample pre‐treatment to physically separate spatial zones. We use laser ablation of solid samples followed by quantitative combustion of the ablated particulates to convert sample carbon into CO₂. Cryofocusing of the resulting CO₂ coupled with modulation in the carrier flow rate permits coherent peak introduction into an isotope ratio mass spectrometer, with only 65 ng carbon required per measurement. We conclusively demonstrate that the measured CO₂ is produced by combustion of laser‐ablated aerosols from the sample surface. We measured δ¹³C for a series of solid compounds using laser ablation and traditional solid sample analysis techniques. Both techniques produced consistent isotopic results but the laser ablation method required over two orders of magnitude less sample. We demonstrated that LA‐IRMS sensitivity coupled with its 50 µm spatial resolution could be used to measure δ¹³C values along a length of hair, making multiple sample measurements over distances corresponding to a single day's growth. This method will be highly valuable in cases where the δ¹³C analysis of small samples over prescribed spatial distances is required. Suitable applications include forensic analysis of hair samples, investigations of tightly woven microbial systems, and cases of surface analysis where there is a sharp delineation between different components of a sample. Copyright © 2011 John Wiley & Sons, Ltd.     

Reconstructing bulk isotope ratios from compound‐specific isotope ratios

Carbon isotope analysis by bulk elemental analysis coupled with isotope ratio mass spectrometry has been the mainstay of δ¹³C analyses both at natural abundance and in tracer studies. More recently, compound‐specific isotope analysis (CSIA) has become established, whereby organic constituents are separated online by gas or liquid chromatography before oxidation and analysis of CO₂ for constituent δ¹³C. Theoretically, there should be concordance between bulk δ¹³C measurements and carbon‐weighted δ¹³C measurements of carbon‐containing constituents. To test the concordance between the bulk and CSIA, fish oil was chosen because the majority of carbon in fish oil is in the triacylglycerol form and ～95% of this carbon is amenable to CSIA in the form of fatty acids. Bulk isotope analysis was carried out on aliquots of oil extracted from 55 fish samples and δ¹³C values were obtained. Free fatty acids (FFAs) were produced from the oil samples by saponification and derivatised to fatty acid methyl esters (FAMEs) for CSIA by gas chromatography/combustion/isotope ratio mass spectrometry. A known amount of an internal standard (C15:0 FAME) was added to allow analyte quantitation. This internal standard was also isotopically calibrated in both its FFA (δ¹³C = ?34.30‰) and FAME (δ¹³C = ?34.94‰) form. This allowed reporting of FFA δ¹³C from measured FAME δ¹³C values. The bulk δ¹³C was reconstructed from CSIA data based on each FFA δ¹³C and the relative amount of CO₂ produced by each analyte. The measured bulk mean δ¹³C (SD) was ?23.75‰ (1.57‰) compared with the reconstructed bulk mean δ¹³C of ?23.76 (1.44‰) from CSIA and was not significantly different. Further analysis of the data by the Bland‐Altman method did not show particular bias in the data relative to the magnitude of the measurement. Good agreement between the methods was observed with the mean difference between methods (range) of 0.01‰ (?1.50 to 1.30). Copyright © 2010 John Wiley & Sons, Ltd.     

Membrane permeation continuous‐flow isotope ratio mass spectrometry for on‐line carbon isotope ratio determination

Gaseous membrane permeation (MP) technologies have been combined with continuous‐flow isotope ratio mass spectrometry for on‐line δ¹³C measurements. The experimental setup of membrane permeation‐gas chromatography/combustion/isotope ratio mass spectrometry (MP‐GC/C/IRMS) quantitatively traps gas streams in membrane permeation experiments under steady‐state conditions and performs on‐line gas transfer into a GC/C/IRMS system. A commercial polydimethylsiloxane (PDMS) membrane sheet was used for the experiments. Laboratory tests using CO₂ demonstrate that the whole process does not fractionate the C isotopes of CO₂. Moreover, the δ¹³C values of CO₂ permeated on‐line give the same isotopic results as off‐line static dual‐inlet IRMS δ¹³C measurements. Formaldehyde generated from aqueous formaldehyde solutions has also been used as the feed gas for permeation experiments and on‐line δ¹³C determination. The feed‐formaldehyde δ¹³C value was pre‐determined by sampling the headspace of the thermostated aqueous formaldehyde solution. Comparison of the results obtained by headspace with those from direct aqueous formaldehyde injection confirms that the headspace sampling does not generate isotopic fractionation, but the permeated formaldehyde analyzed on‐line yields a ¹³C enrichment relative to the feed δ¹³C value, the isotopic fractionation being 1.0026 ± 0.0003. The δ¹³C values have been normalized using an adapted two‐point isotopic calibration for δ¹³C values ranging from ?42 to ?10‰. The MP‐GC/C/IRMS system allows the δ¹³C determination of formaldehyde without chemical derivatization or additional analytical imprecision. Copyright © 2009 John Wiley & Sons, Ltd.     

δ13C, δ15N and δ2H isotope ratio mass spectrometry of ephedrine and pseudoephedrine: application to methylamphetamine profiling

Conventional chemical profiling of methylamphetamine has been used for many years to determine the synthetic route employed and where possible to identify the precursor chemicals used. In this study stable isotope ratio analysis was investigated as a means of determining the origin of the methylamphetamine precursors, ephedrine and pseudoephedrine. Ephedrine and pseudoephedrine may be prepared industrially by several routes. Results are presented for the stable isotope ratios of carbon (δ¹³C), nitrogen (δ¹⁵N) and hydrogen (δ²H) measured in methylamphetamine samples synthesized from ephedrine and pseudoephedrine of known provenance. It is clear from the results that measurement of the δ¹³C, δ¹⁵N and δ²H stable isotope ratios by elemental analyzer/thermal conversion isotope ratio mass spectrometry (EA/TC‐IRMS) in high‐purity methylamphetamine samples will allow determination of the synthetic source of the ephedrine or pseudoephedrine precursor as being either of a natural, semi‐synthetic, or fully synthetic origin. Copyright © 2009 Commonwealth of Australia. Published by John Wiley & Sons, Ltd.     

Determination of nitrogen‐15 isotope fractionation in tropine: evaluation of extraction protocols for isotope ratio measurement by isotope ratio mass spectrometry

N‐Demethylation of tropine is an important step in the degradation of this compound and related metabolites. With the purpose of understanding the reaction mechanism(s) involved, it is desirable to measure the ¹⁵N kinetic isotope effects (KIEs), which can be accessed through the ¹⁵N isotope shift (Δδ¹⁵N) during the reaction. To measure the isotope fractionation in ¹⁵N during tropine degradation necessitates the extraction of the residual substrate from dilute aqueous solution without introducing artefactual isotope fractionation. Three protocols have been compared for the extraction and measurement of the ¹⁵N/¹⁴N ratio of tropine from aqueous medium, involving liquid‐liquid phase partitioning or silica‐C18 solid‐phase extraction. Quantification was by gas chromatography (GC) on the recovered organic phase and δ¹⁵N values were obtained by isotope ratio measurement mass spectrometry (irm‐MS). Although all the protocols used can provide satisfactory data and both irm‐EA‐MS and irm‐GC‐MS can be used to obtain the δ¹⁵N values, the most convenient method is liquid‐liquid extraction from a reduced aqueous volume combined with irm‐GC‐MS. The protocols are applied to the measurement of ¹⁵N isotope shifts during growth of a Pseudomonas strain that uses tropane alkaloids as sole source of carbon and nitrogen. The accuracy of the determination of the ¹⁵N/¹⁴N ratio is sufficient to be used for the determination of ¹⁵N‐KIEs. Copyright © 2009 John Wiley & Sons, Ltd.     

Precise and accurate compound-specific carbon and nitrogen isotope analysis of RDX by GC-IRMS

A new analytical method is presented for the compound-specific carbon and nitrogen isotope ratio analysis of a thermo-labile nitramine explosive hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) by gas chromatograph coupled to an isotope ratio mass spectrometer (GC-IRMS). Two main approaches were used to minimise thermal decomposition of the compound during gas chromatographic separation: programmed temperature vaporisation (PTV) as an injection technique and a high-temperature ramp rate during the GC run. δ¹⁵N and δ¹³C values of RDX measured by GC-IRMS and elemental analyser (EA)-IRMS were in good agreement within a standard deviation of 0.3‰ and 0.4‰ for nitrogen and carbon, respectively. Application of the method for the isotope analysis of RDX during alkaline hydrolysis at 50°C revealed isotope fractionation factors ε _carbon?=??7.8‰ and ε _nitrogen?=??5.3‰.     

A rapid and precise method for determination of D/H ratios of plant methoxyl groups

Stable hydrogen isotope ratio measurements of specific plant components are increasingly used in numerous fields of research, including sample origin verification and climate research. A recently suggested method with considerable potential in this context is the D/H isotope ratio (δ²H value) analysis of plant matter methoxyl groups. The method entails ether or ester cleavage with hydriodic acid (HI) to form the gaseous compound methyl iodide (CH₃I) and measurement of the δ²H value of this gas. Here we describe a method for the rapid and precise δ²H analysis of plant matter methoxyl groups using gas chromatography/pyrolysis/isotope ratio mass spectrometry (GC/P/IRMS). The conditions for sample preparation were investigated for isotope discrimination effects, the GC conditions were optimized, the reproducibility of the measurement of standards was studied, and the precision of the method was defined. The reproducibility of δ²H values determined for a CH₃I standard on 20 consecutive measurements was found to be 2‰. The method was also tested on four methoxyl‐rich plant components: vanillin, lignin, wood and pectin. The analytical precision obtained, when expressed as the average standard deviation for these compounds, was better than 1.6‰. The described method is rapid, allowing preparation and analysis of a sample within 1 h, and produces accurate and reproducible isotopic measurements. Copyright © 2008 John Wiley & Sons, Ltd.     

Metabolic turnover rates of carbon and nitrogen stable isotopes in captive juvenile snakes

Metabolic turnover rates (m) of δ¹⁵N and δ¹³C were assessed in different tissues of newly hatched captive‐raised corn snakes (Elaphe guttata guttata) fed maintenance diets consisting of earthworms (Eisenia foetida) that varied substantially in δ¹⁵N (by 644‰) and δ¹³C (by 5.0‰). Three treatments were used during this 144 day experiment that consisted of the same diet throughout (control), shifting from a depleted to an enriched stable isotope signature diet (uptake), and shifting from an enriched to depleted stable isotope signature diet (elimination). Values of δ¹³C in the liver, blood, and muscle of the control snakes reached equilibrium with and were, respectively, 1.73, 2.25 and 2.29 greater than in their diet, this increase is called an isotopic discrimination factor (Δδ¹³C = δ¹³C_snake ? δ¹³C_food). Values of δ¹⁵N in snake tissues did not achieve equilibrium with the diets in any of the exposures and thus Δ¹⁵N could not be estimated. Values of metabolic turnover rates (m) for δ¹³C and δ¹⁵N were greater in liver than in muscle and blood, which were similar, and relative results remained the same if the fraction of ¹⁵N and ¹³C were modeled. Although caution is warranted because equilibrium values of stable isotopes in the snakes were not achieved, values of m were greater for δ¹³C than δ¹⁵N, resulting in shorter times to dietary equilibrium for δ¹³C upon a diet shift, and for both stable isotopes in all tissues, greater during an elimination than in an uptake shift in diet stable isotope signature. Multiple explanations for the observed differences between uptake and elimination shifts raise new questions about the relationship between animal and diet stable isotope concentrations. Based on this study, interpretation of feeding ecology using stable isotopes is highly dependent on the kind of stable isotope, tissue, direction of diet switch (uptake versus elimination), and the growth rate of the animal. Copyright © 2009 John Wiley & Sons, Ltd.     

Carbon and oxygen isotope microanalysis of carbonate

Technical modification of the conventional method for the δ¹³C and δ¹⁸O analysis of 10–30 µg carbonate samples is described. The CO₂ extraction is carried out in vacuum using 105% phosphoric acid at 95°C, and the isotopic composition of CO₂ is measured in a helium flow by gas chromatography/isotope ratio mass spectrometry (GC/IRMS). The feed‐motion of samples to the reaction vessel provides sequential dropping of only the samples (without the sample holder) into the acid, preventing the contamination of acid and allowing us to use the same acid to carry out very large numbers of analyses. The high accuracy and high reproducibility of the δ¹³C and δ¹⁸O analyses were demonstrated by measurements of international standards and comparison of results obtained by our method and by the conventional method. Our method allows us to analyze 10 µg of the carbonate with a standard deviation of ±0.05‰ for δ¹³C and δ¹⁸O. The method has been used successfully for the analyses of the oxygen and carbon isotopic composition of the planktonic and benthic foraminifera in detailed palaeotemperature reconstructions of the Okhotsk Sea. Copyright © 2009 John Wiley & Sons, Ltd.     

Kinetic 12C/13C isotope fractionation by invertase: evidence for a small in vitro isotope effect and comparison of two techniques for the isotopic analysis of carbohydrates

The natural ¹³C/¹²C isotope composition (δ¹³C) of plants and organic compounds within plant organs is a powerful tool to understand carbon allocation patterns and the regulation of photosynthetic or respiratory metabolism. However, many enzymatic fractionations are currently unknown, thus impeding our understanding of carbon trafficking pathways within plant cells. One of them is the ¹²C/¹³C isotope effect associated with invertases (EC 3.2.1.26) that are cornerstone enzymes for Suc metabolism and translocation in plants. Another conundrum of isotopic plant biology is the need to measure accurately the specific δ¹³C of individual carbohydrates. Here, we examined two complementary methods for measuring the δ¹³C value of sucrose, glucose and fructose, that is, off‐line high‐performance liquid chromatography (HPLC) purification followed by elemental analysis and isotope ratio mass spectrometry (EA‐IRMS) analysis, and gas chromatography‐combustion (GC‐C)‐IRMS. We also used these methods to determine the in vitro ¹²C/¹³C isotope effect associated with the yeast invertase. Our results show that, although providing more variable values than HPLC～EA‐IRMS, and being sensitive to derivatization conditions, the GC‐C‐IRMS method gives reliable results. When applied to the invertase reaction, both methods indicate that the ¹²C/¹³C isotope effect is rather small and it is not affected by the use of heavy water (D₂O). Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of a controlled dietary change on carbon and nitrogen stable isotope ratios of human hair

The carbon (¹³C/¹²C) and nitrogen (¹⁵N/¹⁴N) stable isotope ratios of human hair can be used for the interpretation of dietary habits and nutritional status in contemporary or past populations. Although the results of bulk or segmental isotope ratio analysis of human hair have been used for the reconstruction of an individual's diet for years, only limited data of controlled dietary changes on the carbon and nitrogen isotopic composition of human hair are available. Hair of four individuals, two males and two females, who participated in a dietary change experiment for 28 days was segmentally analysed for δ¹³C and δ¹⁵N. The dietary change included a change from C3 to C4 plant enriched diets and a simultaneous replacement of terrestrial animal products by marine products. This resulted in an increase in δ¹³C_diet of +8.5 to +9.9‰ and in δ¹⁵N_diet of +1.5 to +2.2‰. All subjects showed significant increases in δ¹³C_hair and δ¹⁵N_hair during the dietary change period, although no subject reached a new steady state for either carbon or nitrogen. The change in δ¹⁵N_hair was faster than the change in δ¹³C_hair for all individuals. The magnitude of change of the isotopic composition during the dietary change period could be attributed to the degree of physical activity of the individuals, with a higher physical activity resulting in a faster change. Copyright © 2009 John Wiley & Sons, Ltd.     

Stable isotope ratio analysis to differentiate temporal diets of a free‐ranging herbivore

Stable isotope ratio analysis (SIRA) of carbon (δ¹³C) and nitrogen (δ¹⁵N) in tissue samples of herbivores can identify photosynthetic pathways (C₃ vs. C₄) of plants consumed. We present results from free‐ranging Rocky Mountain elk (Cervus elaphus) that highlight the ability to differentiate diets using tissue δ¹³C and δ¹⁵N. The signatures of δ¹³C and δ¹⁵N differed in tissues of varying metabolic activity: muscle, a short‐term dietary indicator (i.e., 1–2 months) and hoof, a long‐term dietary indicator (i.e., 3–12 months). We also documented that δ¹³C and δ¹⁵N values along elk hooves (proximal, middle, distal sections) elucidated temporal shifts in dietary selection. The carbon isotopes of the composite hoof were similar to those of the middle section, but the composite hoof differed in δ¹³C from the distal and proximal sections. The δ¹³C and δ¹⁵N signatures also differed among elk populations, indicating temporal dietary shifts of individuals occupying disparate native range and human‐derived agricultural landscapes. Analyses of stable isotopes in various tissues highlighted carbon and nitrogen assimilation through time and differences in the foraging ecology of a rangeland herbivore. Published in 2009 by John Wiley & Sons, Ltd.     

Comparison of different mass spectrometry techniques in the measurement of L‐[ring‐13C6]phenylalanine incorporation into mixed muscle proteins

Precise measurement of low enrichment of stable isotope labeled amino‐acid tracers in tissue samples is a prerequisite in measuring tissue protein synthesis rates. The challenge of this analysis is augmented when small sample size is a critical factor. Muscle samples from human participants following an 8 h intravenous infusion of L‐[ring‐¹³C₆]phenylalanine and a bolus dose of L‐[ring‐¹³C₆]phenylalanine in a mouse were utilized. Liquid chromatography tandem mass spectrometry (LC/MS/MS), gas chromatography (GC) MS/MS and GC/MS were compared to the GC‐combustion‐isotope ratio MS (GC/C/IRMS), to measure mixed muscle protein enrichment of [ring‐¹³C₆]phenylalanine enrichment. The sample isotope enrichment ranged from 0.0091 to 0.1312 molar percent excess. As compared with GC/C/IRMS, LC/MS/MS, GC/MS/MS and GC/MS showed coefficients of determination of R² = 0.9962 and R² = 0.9942, and 0.9217 respectively. However, the precision of measurements (coefficients of variation) for intra‐assay are 13.0%, 1.7%, 6.3% and 13.5% and for inter‐assay are 9.2%, 3.2%, 10.2% and 25% for GC/C/IRMS, LC/MS/MS, GC/MS/MS and GC/MS, respectively. The muscle sample sizes required to obtain these results were 8 µg, 0.8 µg, 3 µg and 3 µg for GC/C/IRMS, LC/MS/MS, GC/MS/MS and GC/MS, respectively. We conclude that LC/MS/MS is optimally suited for precise measurements of L‐[ring‐¹³C₆]phenylalanine tracer enrichment in low abundance and in small quantity samples. Copyright © 2013 John Wiley & Sons, Ltd.     

Revised δ34S reference values for IAEA sulfur isotope reference materials S‐2 and S‐3

Revised δ³⁴S reference values with associated expanded uncertainties (95% confidence interval (C.I.)) are presented for the sulfur isotope reference materials IAEA‐S‐2 (22.62 ± 0.16‰) and IAEA‐S‐3 (−32.49 ± 0.16‰). These revised values are determined using two relative‐difference measurement techniques, gas source isotope ratio mass spectrometry (GIRMS) and double‐spike multi‐collector thermal ionization mass spectrometry (MC‐TIMS). Gas analyses have traditionally been considered the most robust for relative isotopic difference measurements of sulfur. The double‐spike MC‐TIMS technique provides an independent method for value‐assignment validation and produces revised values that are both unbiased and more precise than previous value assignments. Unbiased δ³⁴S values are required to anchor the positive and negative end members of the sulfur delta (δ) scale because they are the basis for reporting both δ³⁴S values and the derived mass‐independent Δ³³S and Δ³⁶S values. Published in 2009 by John Wiley & Sons, Ltd.     

Single-step transesterification with simultaneous concentration and stable isotope analysis of fatty acid methyl esters by gas chromatography-combustion-isotope ratio mass spectrometry

Gas chromatography‐combustion‐isotope ratio mass spectrometry (GC‐C‐IRMS) is increasingly applied to food and metabolic studies for stable isotope analysis (δ¹³C), with the quantification of analyte concentration often obtained via a second alternative method. We describe a rapid direct transesterification of triacylglycerides (TAGs) for fatty acid methyl ester (FAME) analysis by GC‐C‐IRMS demonstrating robust simultaneous quantification of amount of analyte (mean r² = 0.99, accuracy ±2% for 37 FAMEs) and δ¹³C (±0.13‰) in a single analytical run. The maximum FAME yield and optimal δ¹³C values are obtained by derivatizing with 10% (v/v) acetyl chloride in methanol for 1 h, while lower levels of acetyl chloride and shorter reaction times skewed the δ¹³C values by as much as 0.80‰. A Bland‐Altman evaluation of the GC‐C‐IRMS measurements resulted in excellent agreement for pure oils (±0.08‰) and oils extracted from French fries (±0.49‰), demonstrating reliable simultaneous quantification of FAME concentration and δ¹³C values. Thus, we conclude that for studies requiring both the quantification of analyte and δ¹³C data, such as authentication or metabolic flux studies, GC‐C‐IRMS can be used as the sole analytical method. Copyright © 2011 John Wiley & Sons, Ltd.     

High-temperature reversed-phase liquid chromatography coupled to isotope ratio mass spectrometry

Compound‐specific isotope analysis (CSIA) by liquid chromatography coupled to isotope ratio mass spectrometry (LC/IRMS) has until now been based on ion‐exchange separation. In this work, high‐temperature reversed‐phase liquid chromatography was coupled to, and for the first time carefully evaluated for, isotope ratio mass spectrometry (HT‐LC/IRMS) with four different stationary phases. Under isothermal and temperature gradient conditions, the column bleed of XBridge C₁₈ (up to 180 °C), Acquity C₁₈ (up to 200 °C), Triart C₁₈ (up to 150 °C), and Zirchrom PBD (up to 150 °C) had no influence on the precision and accuracy of δ¹³C measurements, demonstrating the suitability of these columns for HT‐LC/IRMS analysis. Increasing the temperature during the LC/IRMS analysis of caffeine on two C₁₈ columns was observed to result in shortened analysis time. The detection limit of HT‐RPLC/IRMS obtained for caffeine was 30 mg L^–1 (corresponding to 12.4 nmol carbon on‐column). Temperature‐programmed LC/IRMS (i) accomplished complete separation of a mixture of caffeine derivatives and a mixture of phenols and (ii) did not affect the precision and accuracy of δ¹³C measurements compared with flow injection analysis without a column. With temperature‐programmed LC/IRMS, some compounds that coelute at room temperature could be baseline resolved and analyzed for their individual δ¹³C values, leading to an important extension of the application range of CSIA. Copyright © 2011 John Wiley & Sons, Ltd.     

Correlation between the synthetic origin of methamphetamine samples and their 15N and 13C stable isotope ratios

The active ingredient of ecstasy, N-methyl-3,4-methyldioxyphenylisopropylamine (MDMA) can be manufactured by a number of easy routes from simple precursors. We have synthesised 45 samples of MDMA following the five most common routes using N-precursors from 12 different origins and three different precursors for the aromatic moiety. The ¹³C and ¹⁵N contents of both the precursors and the MDMA samples derived therefrom were measured by isotope ratio mass spectrometry coupled to an elemental analyser (EA-IRMS). We show that within-pathway correlation between the ¹⁵N content of the precursor and that of the derived MDMA can be strong but that no general pattern of correlation can be defined. Rather, it is evident that the δ¹⁵N values of MDMA are strongly influenced by a combination of the δ¹⁵N values of the source of nitrogen used, the route by which the MDMA is synthesised, and the experimental conditions employed. Multivariate analysis (PCA) based on the δ¹⁵N values of the synthetic MDMA and of the δ¹⁵N and δ¹³C values of the N-precursors leads to good discrimination between the majority of the reaction conditions tested.