New chiral [N,N,N]‐ligand containing titanium/zirconium precatalysts for 1‐hexene polymerization

The ring‐opening reaction of (S)‐N‐tosyl‐2‐phenylaziridine by benzylamine in ethanol at 80 °C resulted in the formation of the (S,S)‐bis(N‐tosyl‐2‐amino‐2‐phenylethyl)benzylamine ligand in a 60% yield. The corresponding titanium complex, 1‐TiCl₂, was prepared by the reaction of the dilithiated parent ligand with TiCl₄. This precatalyst, in combination with methylaluminoxane, was capable of polymerizing 1‐hexene with good activities, resulting in the formation of good yields of low‐dispersity, high‐molecular‐weight polymers at low temperatures but higher yields of lower molecular weight polymers at higher temperatures. ¹H and ¹³C NMR spectra of the polymers suggested high isotacticity and predominant chain termination via β‐hydride elimination. The enantiomerically pure catalysts, (R,R)‐1‐TiCl₂ and (S,S)‐1‐TiCl₂, showed nearly identical polymerization results at various polymerization temperatures. However, when the catalyst was prepared from a racemic ligand, the obtained polymers had lower molecular weights with a bimodal distribution. This observation suggested diastereomeric aggregation of the racemic catalyst, which was well supported by the NMR studies, and a modified Arrhenius plot (the natural logarithm of the number‐average molecular weight vs the reciprocal of the temperature) also showed sigmoidal behavior, indicating the existence of two or more active species. Analogous zirconium precatalysts showed similar results in the polymerization of 1‐hexene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4006–4014, 2006     

Some novel accelerating agents for nitroxide‐mediated living free‐radical polymerization

Malononitrile (MN), trifluoroacetic acid anhydride, acetylacetone, acetoacetic ester, and diethyl malonate have been identified as novel rate‐accelerating additives for nitroxide‐mediated living free‐radical polymerization. Among these additives, MN has the greatest accelerating effect. Adding MN at an MN/2,2,6,6‐tetramethylpiperidine‐oxyl (TEMPO) molar ratio of 4.0 results in a nearly 20 times higher rate of polymerization of styrene (St), and adding MN at an MN/TEMPO molar ratio of 2.5 results in a nearly 15 times higher rate of copolymerization of St and methyl methacrylate. The polymerization of St proceeds in a living fashion, as indicated by the increase in the molecular weight with time and conversion and the relatively low polydispersity. The polymerization rate of St is so quick that the conversion reaches 70% within 1 h at 125 °C when the molar ratio of MN to TEMPO is 4:1. Moreover, the reaction temperature can be reduced to 110 °C. A possible explanation for this effect is that the formation of hydrogen bonds between the MN and TEMPO moiety weakens the C? ON bond at the end of the polymer chain. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5246–5256, 2005     

TREN versus Me6‐TREN as ligands in SET‐LRP of methyl acrylate

The commercially available tris(2‐aminoethyl)amine (TREN) was used as ligand to mediate the single‐electron transfer‐living radical polymerization (SET‐LRP) of methyl acrylate in dimethyl sulfoxide initiated with the bifunctional initiator bis(2‐bromopropionyl)ethane and catalyzed by both nonactivated and activated Cu(0) wire. A comparative study between TREN and tris(2‐dimethylaminoethyl)amine (Me₆‐TREN) ligand, that is more commonly used in SET‐LRP, demonstrated that TREN provided a slower polymerization but the chain‐ends functionality of the resulting bifunctional poly(methyl acrylate) was near quantitative and comparable to that obtained when Me₆‐TREN was used as a ligand. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012.     

Synthesis of poly(dimethylsiloxane)‐containing diblock and triblock copolymers by the combination of anionic ring‐opening polymerization of hexamethylcyclotrisiloxane and nitroxide‐mediated radical polymerization of methyl acrylate,isoprene, and styrene

Poly(dimethylsiloxane)‐containing diblock and triblock copolymers were prepared by the combination of anionic ring‐opening polymerization (AROP) of hexamethylcyclotrisiloxane (D₃) and nitroxide‐mediated radical polymerization (NMRP) of methyl acrylate (MA), isoprene (IP), and styrene (St). The first step was the preparation of a TIPNO‐based alkoxyamine carrying a 4‐bromophenyl group. The alkoxyamine was then treated with Li powder in ether, and AROP of D₃ was carried out using the resulting lithiophenyl alkoxyamine at room temperature, giving functional poly(D₃) with M_w/M_n of 1.09–1.16. NMRPs of MA, St, and IP from the poly(D₃) at 120 °C gave poly(D₃‐b‐MA), poly(D₃‐b‐St), and poly(D₃‐b‐IP) diblock copolymers, and subsequent NMRPs of St from poly(D₃‐b‐MA) and poly(D₃‐b‐IP) at 120 °C gave poly(D₃‐b‐MA‐b‐St) and poly(D₃‐b‐IP‐b‐St) triblock copolymers. The poly(dimethylsiloxane)‐containing diblock and triblock copolymers were analyzed by ¹H NMR and size exclusion chromatography. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6153–6165, 2005     

Titanium complexes of dialkanolamine ligands as initiators for living ring‐opening polymerization of ε‐caprolactone

The titanium complexes with one ( 1a , 1b , 1c ) and two ( 2a , 2b ) dialkanolamine ligands were used as initiators in the ring‐opening polymerization (ROP) of ε‐caprolactone. Titanocanes 1a and 1b initiated living ROP of ε‐caprolactone affording polymers whose number‐average molecular weights (M_n) increased in direct proportion to monomer conversion (M_n ≤ 30,000 g mol^?1) in agreement with calculated values, and were inversely proportional to initiator concentration, while the molecular weight distribution stayed narrow throughout the polymerization (M_w/M_n ≤ 1.2 up to 80% monomer conversion). ¹H‐NMR and MALDI‐TOF‐MS studies of the obtained poly(ε‐caprolactone)s revealed the presence of an isopropoxy group originated from the initiator at the polymer termini, indicating that the polymerization takes place exclusively at the Ti–OⁱPr bond of the catalyst. The higher molecular weight polymers (M_n ≤ 70,000 g mol^?1) with reasonable MWD (M_w/M_n ≤ 1.6) were synthesized by living ROP of ε‐caprolactone using spirobititanocanes ( 2a , 2b ) and titanocane 1c as initiators. The latter catalysts, according MALDI‐TOF‐MS data, afford poly(ε‐caprolactone)s with almost equal content of α,ω‐dihydroxyl‐ and α‐hydroxyl‐ω(carboxylic acid)‐terminated chains arising due to monomer insertion into “Ti–O” bond of dialkanolamine ligand and from initiation via traces of water, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1230–1240, 2010     

Nitroxide‐mediated polymerization of 1,3‐butadiene in the presence of diphenylamine with hydrogen peroxide as initiator

Living behavior of a nitroxide‐mediated polymerization of 1,3‐butadiene in the presence of diphenyl nitroxide (DPN) as counter radical and hydrogen peroxide (H₂O₂) as initiator has been studied to elucidate the bimodal molar mass distribution of the product by four approaches such as hydrolyzation of the oligomeric product, peak separation technique, which defines the oligobutadiene molar mass dependency in relation to α as a ratio of [nitroxide] to [H₂O₂], variation of hydroxyl value with respect to α, and para‐substituted DPN. It is demonstrated that the synthesized DPN shows efficient control of the polymerization of 1,3‐butadiene, but because of the formation of difunctional nitroxide during the oxidation process of aromatic diphenylamine, a bimodal distribution in the final product is observed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polymerization of 1‐olefins by zirconium/titanium precatalysts with O,N,O‐ligating atoms—can aggregation of catalyst be inferred from the reaction profile?

The 2‐[benzyl‐(2‐hydroxy‐2‐phenylethyl)‐amino]‐1‐phenylethanol ligand (1‐H₂) prepared as a diastereomeric mixture or in racemic and meso forms, from known procedure, has been disodiated and complexed with ZrCl₄. The precatalysts (mix‐1‐ZrCl₂, rac‐1‐ZrCl₂, and meso‐1‐ZrCl₂) were used in combination with methylaluminoxane and found to be active for the polymerization of 1‐hexene and 1‐octene. The high molecular weight polyhexenes (PHs) and polyoctenes (POs) thus obtained were isotactic in nature and showed a negligible amount of end groups arising from the chain termination reactions. In PHs and POs, there was linear correlation in the modified Arrhenius plot (the natural logarithm of the number‐average molecular weight vs. the reciprocal of the temperature), indicating the presence of a single active species. The enantiomerically pure titanium precatalyst ((R,R)‐1‐TiCl₂), when employed for the polymerization of 1‐hexene, was found to be active and the modified Arrhenius plot showed linear dependence demonstrating presence of a single active species. The analogous titanium precatalysts (mix‐1‐TiCl₂, rac‐1‐TiCl₂, and meso‐1‐TiCl₂) obtained from known procedures were also found to be active for the polymerization of 1‐octene. The rac‐1‐TiCl₂ precatalyst demonstrated a sigmoidal behavior in the modified Arrhenius plot for the POs and the mix‐1‐TiCl₂ precatalyst showed an exponential type of behavior. The obtained POs seemed to have small amounts of chain termination via β‐hydride elimination alone. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3599–3610, 2007     

Synthesis and characterization of arborescent (hyperbranched) polyisobutylenes from the 4‐(1,2‐oxirane‐isopropyl)styrene inimer

The synthesis of the novel inimer (initiator‐monomer) 4‐(1,2‐oxirane‐isopropyl)styrene EPOIM and the copolymerization of this inimer with isobutylene (IB) to form arborescent polyisobutylene (PIB) is described. Polymerizations were accomplished by use of TiCl₄ coinitiator and the effect of reaction conditions was investigated. Size exclusion chromatography (SEC) was used demonstrate EPOIM incorporation across the whole molecular weight distribution. The average number of branch points (B) per chain measured by use of selective link destruction increased with increasing EPOIM/IB ratio and decreased with [TiCl₄]. Large scale polymerizations were carried out based on results from small scale polymerizations. Architecture analysis carried out through use of branching parameters based on the radii of gyration R_g and hydrodynamic radii R_h measured by multidetector SEC corroborated the proposed arborescent architecture. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5847–5856, 2007     

Propylene polymerization by C1‐symmetric {ONNO′}‐type salan zirconium complexes

The activities of C₁‐symmetric dibenzyl zirconium complexes of Salan ligands that bear a halo‐substituted phenolate ring and an alkyl‐substituted phenolate ring in propylene polymerization with methylaluminoxane as cocatalyst were studied. These {ONNO′}ZrBn₂‐type catalysts exhibited moderate‐to‐high activities and yielded polypropylene of low molecular weight. The degree of tacticity was found to depend on the steric bulk of the substituents on both phenolate rings and ranged from practically atactic to substantially isotactic (74–78% [mmmm] for polymerizations at room temperature by Lig⁵ZrBn₂). Hemi‐isotactic polypropylene was not obtained, despite the diastereotopicity of the two positions. The pattern of stereo errors was consistent with the enantiomorphic site control of propylene insertion typically observed for C₂‐symmetric catalysts and implied a facile site‐averaging mechanism. A regular 1,2‐insertion and a β‐H transfer to an incoming monomer correspond to the main propagation and termination processes, respectively. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Ligand‐free Cu(0)‐mediated controlled radical polymerization of methyl methacrylate at ambient temperature

For the first time, ligand‐free Cu(0)‐mediated polymerization of methyl methacrylate (MMA) was realized by the selection of ethyl‐2‐bromo‐2‐phenylacetate as initiator at ambient temperature. The polymerization can reach up to 90% conversion within 5 h with dimethyl sulfoxide (DMSO) as solvent, while keeping manners of the controlled radical polymerization. Extensive investigation of this system revealed that for a well‐controlled Cu(0)‐mediated polymerization of MMA, the initiator should be selected with the structure as alkyl 2‐bromo‐2‐phenylacetate, and the solvent should be DMSO or N,N‐dimethylformamide. The selectivity for solvents indicated a typical single‐electron transfer‐living radical polymerization process. Scanning for other monomers indicated that under equal conditions, the polymerizations of other alkyl (meth)acrylates were uncontrollable. Based on these results, plausible reasons were discussed. The ligand‐free Cu(0)‐mediated polymerization showed its superiority with economical components and needless removal of Cu species from the resultant products. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Copper(0)‐mediated living radical polymerization of acrylonitrile at room temperature

The copper(0)‐catalyzed living radical polymerization of acrylonitrile (AN) was investigated using ethyl 2‐bromoisobutyrate as an initiator and 2,2′‐bipyridine as a ligand. The polymerization proceeded smoothly in dimethyl sulphoxide with higher than 90% conversion in 13 h at 25 °C. The polymerization kept the features of controlled radical polymerization. ¹H NMR spectra proved that the resultant polymer was end‐capped by ethyl 2‐bromoisobutyrate species. Such polymerization technique was also successfully introduced to conduct the copolymerization of styrene (St) and AN to obtain well‐controlled copolymers of St and AN at 25 °C, in which the monomer conversion of St could reach to higher than 90%. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Reversible addition–fragmentation chain transfer polymerization of glycidyl methacrylate with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate as a chain‐transfer agent

A reversible addition–fragmentation chain transfer (RAFT) agent, 2‐cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN), was synthesized and applied to the RAFT polymerization of glycidyl methacrylate (GMA). The polymerization was conducted both in bulk and in a solvent with 2,2′‐azobisisobutyronitrile (AIBN) as the initiator at various temperatures. The results for both types of polymerizations showed that GMA could be polymerized in a controlled way by RAFT polymerization with CPDN as a RAFT agent; the polymerization rate was first‐order with respect to the monomer concentration, and the molecular weight increased linearly with the monomer conversion up to 96.7% at 60 °C, up to 98.9% at 80 °C in bulk, and up to 64.3% at 60 °C in a benzene solution. The polymerization rate of GMA in bulk was obviously faster than that in a benzene solution. The molecular weights obtained from gel permeation chromatography were close to the theoretical values, and the polydispersities of the polymer were relatively low up to high conversions in all cases. It was confirmed by a chain‐extension reaction that the AIBN‐initiated polymerizations of GMA with CPDN as a RAFT agent were well controlled and were consistent with the RAFT mechanism. The epoxy group remained intact in the polymers after the RAFT polymerization of GMA, as indicated by the ¹H NMR spectrum. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2558–2565, 2004     

Novel dinitroxide mediating agent for stable free‐radical polymerization

A novel dinitroxide mediating agent that was suitable for stable free‐radical polymerization was synthesized and used in the block copolymerization of styrene and t‐butyl styrene. Quantitative yields of a novel dinitroxide based on 1,6‐hexamethylene diisocyanate and 4‐hydroxy‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy were obtained. Various experimental parameters, including the nitroxide‐to‐initiator molar ratio, were examined, and it was determined that the polymerization was most controlled under conditions similar to those of conventional 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐mediated stable free‐radical polymerization. Moreover, the dinitroxide mediator proved to be a viable route for the facile two‐step synthesis of triblock copolymers of styrene and t‐butyl styrene. However, the dinitroxide mediation process resulted in a higher than expected level of nitroxide decomposition, which resulted in polymers possessing a terminal alkoxyamine and an adjacent hydroxylamine rather than a preferred internal bisalkoxyamine. This decomposition resulted in the formation of diblock copolymer species during the triblock copolymer synthesis. Gel permeation chromatography was used to monitor the chain‐end decomposition kinetics, and the determined observed rate constant (5.89 × 10^?5 s^?1) for decomposition agreed well with previous studies for other dinitroxide mediating agents. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1547–1556, 2004     

Deactivation reactions in the modeled 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐mediated free‐radical polymerization of styrene: A comparative study with the 2,2,6,6‐tetramethyl‐1‐piperidinyloxy/acrylonitrile system

The competitiveness of the combination and disproportionation reactions between a 1‐phenylpropyl radical, standing for a growing polystyryl macroradical, and a 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) radical in the nitroxide‐mediated free‐radical polymerization of styrene was quantitatively evaluated by the study of the transition geometry and the potential energy profiles for the competing reactions with the use of quantum‐mechanical calculations at the density functional theory (DFT) UB3‐LYP/6‐311+G(3df, 2p)//(unrestricted) Austin Model 1 level of theory. The search for transition geometries resulted in six and two transition structures for the radical combination and disproportionation reactions, respectively. The former transition structures, mainly differing in the out‐of‐plane angle of the N? O bond in the transition structure TEMPO molecule, were correlated with the activation energy, which was determined to be in the range of 8.4–19.4 kcal mol^?1 from a single‐point calculation at the DFT UB3‐LYP/6‐311+G(3df, 2p)//unrestricted Austin Model 1 level. The calculated activation energy for the disproportionation reaction was less favorable by a value of more than 30 kcal mol^?1 in comparison with that for the combination reaction. The approximate barrier difference for the TEMPO addition and disproportionation reaction was slightly smaller for the styrene polymerization system than for the acrylonitrile polymerization system, thus indicating that a β‐proton abstraction through a TEMPO radical from the polymer backbone could diminish control over the radical polymerization of styrene with the nitroxide even more than in the latter system. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 232–241, 2007     

A “Mitsubishi emblem” tetrauclear aluminum complex containing two unsymmetric N2O2‐ligands and a symmetric NO3‐ligand as initiator for polymerization of rac‐lactide

A novel hydroxy‐, methoxy‐, and phenoxy‐bridge “Mitsubishi emblem” tetranuclear aluminum complex ( 1 ) is synthesized from an unsymmetric amine‐pyridine‐bis(phenol) N₂O₂‐ligand (H₂L¹) and a symmetric amine‐tris(phenol) NO₃‐ligand (H₂L²). Two same configuration chiral nitrogen atoms are formed in the tetranuclear Al complex upon coordination of the unsymmetric tertiary amine ligand to central Al. Complex 1 initiates controlled ring‐opening polymerization (ROP) of rac‐lactide and afford polylactide (PLA) with narrow molecular weight distributions (M_w/M_n = 1.05–1.19). The analysis of ¹H NMR spectra of the oligomer indicates that the methoxy group is the initiating group and the ring‐opening polymerization of lactide follows a coordination‐insertion mechanism. The Homonuclear decoupled ¹H NMR spectroscopy suggests the isotactic‐rich chains is preferentially formed in PLA. The study on kinetics of the ROP of lactide reveals the homopropagation rate is higher than the cross‐propagation rate, which is in agreement with the observed isotactic selectivity in the ROP of rac‐lactide. The stereochemistry of the polymerization was also supported by activation parameters. The introduction of unsymmetric ligand H₂L¹ has an effect on stereoslectivity of polymerization. This result may be of interest for the design of multinuclear metal complex catalysts containing functionalized ligands. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2084–2091     

Ring‐opening polymerization of L‐lactide using half‐titanocene complexes of the ATiCl2Nu type: Synthesis,characterization, and thermal properties

Various half‐titanocene complexes of the ATiCl₂Nu type, where A is the pentamethylcyclopentadienyl (Cp*) or indenyl (Ind) group and Nu a nucleophile (ethoxy group or chloride), were used for the polymerization of L ‐lactide, LLA. In the cases where Nu is an ethoxy group, a 5% excess of ATiCl₃ was used to accelerate the polymerization reaction. These systems were proven to be very efficient initiators for the ring‐opening polymerization (ROP) of LLA in toluene at 130 °C. Kinetic studies revealed that in most cases the polymerization yield was quantitative and the molecular weight increased linearly with time, leading to well‐defined PLLA with narrow molecular weight distributions (M_w/M_n ≤ 1.1). LLA was also polymerized by the in situ formation of the initiating system after mixing IndTiCl₃, benzyl alcohol, BzOH, and NEt₃. The thermal properties of the produced polymers were examined by differential scanning calorimetry and thermogravimetric analysis. The activation energy of the thermal decomposition was calculated by the Ozawa–Flynn–Wall and Kissinger methods. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Titanium(IV) complexes containing mono‐cyclopentadienyl and bulky trityloxy mixed ligands: synthesis and polymerization activity

Eight new R¹CpTiCl₂(OC(C₆H₄R²)Ph₂) complexes were synthesized by the reaction of R¹CpTiCl₃ with Ph₂(R²C₆H₄)COH (R²C₆H₄ = phenyl or o‐methyl‐phenyl) in the presence of Et₃N in good yield and characterized by ¹H NMR, elemental analysis, IR and mass spectrometry. A suitable single crystal of complex 2 (R¹: CH₃, R²: H) was obtained and the structure determined by X‐ray diffraction. When activated by methylaluminoxane (MAO), all complexes were active for the polymerization of ethylene and styrene. The effect of variation in temperature, catalyst concentration and MAO/catalyst molar ratio was also studied. Complex 5 (R¹: n‐C₄H₉, R²: H) showed a moderate conversion (37.4%) for the polymerization of methyl methacrylate. Copyright © 2005 John Wiley & Sons, Ltd.     

Asymmetric anionic polymerization of N‐1‐naphthylmaleimide with chiral ligand‐organometal complexes in toluene

Asymmetric anionic homopolymerizations of N‐1‐naphthylmaleimide (1‐NMI) were performed with chiral ligand/organometal complexes to form optically active polymers. Poly(1‐NMI)s obtained with methylene‐bridged bisoxazoline derivatives (Rbox)‐diethylzinc (Et₂Zn) complexes showed high specific optical rotations ([α]) from +152.3 to +191.4°. Circular dichroism spectra of the polymers exhibited a split Cotton effect in the UV absorption‐band region. According to the exciton chirality method, the absolute configuration of the polymer main chain was determined according to the following method: (+)‐poly[N‐substituted maleimides (RMI)] main chains can contain more (S,S)‐ than (R,R)‐configurations. (?)‐Poly(RMI) main chains can contain more (R,R)‐ than (S,S)‐configurations. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3556–3565, 2001     

Conventional radical polymerization and iodine‐transfer polymerization of 4′‐nonafluorobutyl styrene: Surface and thermal characterizations of the resulting poly(fluorostyrene)s

4′‐Nonafluorobutylstyrene (3) was synthesized and polymerized by conventional and controlled radical polymerization (iodine transfer polymerization (ITP)). Such an aromatic fluoromonomer was prepared from Ullmann coupling between 1‐iodoperfluorobutane and 4‐bromoacetophenone followed by a reduction and a dehydration in 50% overall yield. Two radical polymerizations of (3) were initiated by AIBN either under conventional or controlled conditions, with 1‐iodoperfluorohexane in 84% monomer conversion and in 50% yield. ITP of (3) featured a fast monomer conversion and a linear evolution of the ln([M]₀/[M]) versus time. The kinetics of radical homopolymerization of (3) enabled one to assess its square of the propagation rate to the termination rate (k_p²/k_t) in ITP conditions (36.2·10^?2 l·mol^?2·sec^?2 at 80 °C) from the Tobolsky's kinetic law. Polydispersity index (?) of the fluoropolymer achieved by conventional polymerization was 1.30 while it worthed 1.15 when synthesized by ITP. Thermal stabilities of these oligomers were satisfactory (10% weight loss under air occurred from 305 °C) whereas the melting point was 47 °C. Contact angles and surface energies assessed from spin‐coated poly(3) films obtained by conventional (hysteresis = 18°, surface energy 18 mN.m^?1) and ITP (hysteresis = 47°, surface energy 15 mN.m^?1) evidenced ? values' influence onto surface properties of the synthesized polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3202–3212     

Polymerization of methyl acrylate mediated by copper(0)/Me6‐TREN in hydrophobic media enhanced by phenols; Single electron transfer‐living radical polymerization

Phenol has been used as an additive to enhance the rate of SET‐LRP in toluene at ambient temperature. A direct relationship between reaction time and amount of phenol added has been found with the optimum amount being ～ 20 equiv. of phenol with respect to initiator. Polymerization of methyl acrylate (MA) has been carried out in the presence of varying amounts of phenol and the rate of polymerization depends on the concentration of phenol relative to initiator. With a 20‐fold excess 93% conversion is observed after 218 min (PDI = 1.06, M_n = 11,500 g mol^?1) when compared with 80% conversion with a 5‐fold excess (PDI = 1.21, M_n = 5310 g mol^?1). When nonsterically hindered phenols are employed in a 20 molar excess with respect to the initiator the polymerizations have good linear first‐order kinetics and give polymers with PDI between 1.06 and 1.16. When a highly hindered phenol is employed there is a significant induction period prior to polymerization taking place which is similar to when using no phenol. Less hindered phenols accelerated the polymerization when compared with polymerizations with no added phenol. Increasing steric hindrance at the ? OH prevents this coordination which indicates that the role of phenol is different with either copper(0) or copper(I). Aliphatic and aromatic esters and amides were used successfully as initiators giving polymers with M_n close to that predicted at ～ 10,000 g mol^?1 and PDI typically less than 1.10. An induction period is observed in most cases which can be removed by a pre‐equilibrium step before the addition of monomer. This results in excellent first‐order kinetics being observed in the polymerization of MA in toluene solution (50 vol %). Here Cu(0) (powder)/Me₆‐TREN with 20 equiv. of phenol and all of the reactants, except the monomer, were added to the reaction flask and stirred for 45 min at 25 °C. The structure of the polymer is shown by MALDI TOF MS to contain bromide chain ends derived from the alkyl bromide initiator. The retention of this end group is consistent with living radical polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7376–7385, 2008