Synthesis and characterization of magnetic and non-magnetic core-shell polyepoxide micrometer-sized particles of narrow size distribution

Core polystyrene microspheres of narrow size distribution were prepared by dispersion polymerization of styrene in a mixture of ethanol and 2-methoxy ethanol. Uniform polyglycidyl methacrylate/polystyrene core-shell micrometer-sized particles were prepared by emulsion polymerization at 73 degrees C of glycidyl methacrylate in the presence of the core polystyrene microspheres. Core-shell particles with different properties (size, surface morphology and composition) have been prepared by changing various parameters belonging to the above seeded emulsion polymerization process, e.g., volumes of the monomer glycidyl methacrylate and the crosslinker monomer ethylene glycol dimethacrylate. Magnetic Fe(3)O(4)/polyglycidyl methacrylate/polystyrene micrometer-sized particles were prepared by coating the former core-shell particles with magnetite nanoparticles via a nucleation and growth mechanism. Characterization of the various particles has been accomplished by routine methods such as light microscopy, SEM, FTIR, BET and magnetic measurements.     

Synthesis and characterization of micrometer‐sized particles of narrow size distribution with chloromethyl functionality on the basis of single‐step swelling of uniform polystyrene template microspheres

Polystyrene template microspheres of 1.4 ± 0.1 μm were prepared by dispersion polymerization of styrene in a mixture of ethanol and 2‐methoxy ethanol. These template particles were then swelled at room temperature in a single step with emulsion that was prepared in sodium dodecyl sulfate aqueous solution from a swelling solvent (dibutyl phthalate) containing the initiator (benzoyl peroxide) and monomer(s) (chlormethylstyrene, divinylbenzene, or ethylene dimethacrylate). Composite uniform particles composed of the template polystyrene and noncrosslinked or crosslinked polychloromethylstyrene were prepared by polymerizing the monomer(s) within the swelled particles at 73 °C. Crosslinked uniform polychloromethylstyrene particles of higher surface area were formed by dissolving the template polystyrene polymer of the composite particles. The influence of various reaction parameters, such as dibuthyl phthalate concentration, chloromethylstyrene concentration, crosslinker type and concentration, and so forth on the molecular weight, size, size distribution, shape, morphology, surface area, and decomposition temperature of the particles was investigated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1342–1352, 2002     

Effects of the reaction parameters on the properties of thermosensitive poly(N‐isopropylacrylamide) microspheres prepared by precipitation and dispersion polymerization

Poly(N‐isopropylacrylamide) (PNIPAAm)‐based microspheres were prepared by precipitation and dispersion polymerization. The effects of several reaction parameters, such as the type and concentration of the crosslinker (N,N′‐methylenebisacrylamide or ethylene dimethacrylate), medium polarity, concentration of the monomer and initiator, and polymerization temperature, on the properties were examined. The hydrogel microspheres were characterized in terms of their chemical structure, size and size distribution, and morphological and temperature‐induced swelling properties. A decrease in the particle size was observed with increasing polarity of the reaction medium or increasing concentration of poly(N‐vinylpyrrolidone) as a stabilizer in the dispersion polymerization. The higher the content was of the crosslinking agent, the lower the swelling ratio was. Too much crosslinker gave unstable dispersions. Although the solvency of the precipitation polymerization mixture controlled the PNIPAAm microsphere size in the range of 0.2–1 μm, a micrometer range was obtained in the Shellvis 50 and Kraton G 1650 stabilized dispersion polymerizations of N‐isopropylacrylamide in toluene/heptane. Typically, the particles had fairly narrow size distributions. Copolymerization with the functional glycidyl methacrylate monomer afforded microspheres with reactive oxirane groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 968–982, 2006     

Synthesis and characterization of micrometer‐sized homo and composite polyacrylonitrile particles of narrow size distribution on the basis of single‐step swelling of uniform polystyrene template microspheres

Polyacrylonitrile/polystyrene micrometer‐sized composite particles of narrow size distribution were prepared by a single‐step swelling of uniform polystyrene template microspheres with emulsion droplets of methylene chloride containing the monomer acrylonitrile and the initiator benzoyl peroxide. Methylene chloride was then evaporated carefully, followed by polymerization of acrylonitrile at 70 °C within the shrunken template particles. Polymerization of acrylonitrile also occurred at the particles' surface due to the interaction of surface polyacrylonitrile oligoradicals with acrylonitrile dissolved in the aqueous phase. Uniform polyacrylonitrile particles of higher surface area were formed by dissolving the template polystyrene polymer of the composite particles. Surface and bulk characterization of the particles were performed by methods such as FTIR, elemental analysis, TGA‐DSC, XRD, XPS, advancing contact angle, light microscope, SEM and cross‐sectional TEM. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4847–4861, 2004     

Efficient synthesis of monodisperse,highly crosslinked,and “living” functional polymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization

The facile and efficient one‐pot synthesis of monodisperse, highly crosslinked, and “living” functional copolymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization (ILRPP) is described for the first time. The simple introduction of iniferter‐induced “living” radical polymerization (ILRP) mechanism into precipitation polymerization system, together with the use of ethanol solvent, allows the direct generation of such uniform functional copolymer microspheres. The polymerization parameters (including monomer loading, iniferter concentration, molar ratio of crosslinker to monovinyl comonomer, and polymerization time and scale) showed much influence on the morphologies of the resulting copolymer microspheres, thus permitting the convenient tailoring of the particle sizes by easily tuning the reaction conditions. In particular, monodisperse poly(4‐vinylpyridine‐co‐ethylene glycol dimethacrylate) microspheres were prepared by the ambient temperature ILRPP even at a high monomer loading of 18 vol %. The general applicability of the ambient temperature ILRPP was confirmed by the preparation of uniform copolymer microspheres with incorporated glycidyl methacrylate. Moreover, the “livingness” of the resulting polymer microspheres was verified by their direct grafting of hydrophilic polymer brushes via surface‐initiated ILRP. Furthermore, a “grafting from” particle growth mechanism was proposed for ILRPP, which is considerably different from the “grafting to” particle growth mechanism in the traditional precipitation polymerization. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Understanding and preventing the formation of deformed polymer particles during synthesis by a seeded polymerization method

Uniformly sized porous polymer particles with different polarity namely poly(divinylbenzene), poly(vinyl acetate‐co‐divinylbenzene), poly(ethylene dimethacrylate), and poly (glycidyl methacrylate‐co‐ethylene dimethacrylate) were prepared in the micron‐size range by a seeded polymerization method. Parameters affecting the particle morphologies including monomer mixture content, porogen content, and polystyrene (PS) seed latexes were varied, and the morphologies of the resulting particles were investigated by scanning electron and confocal microscopy. The results obtained indicated that the particle shape depended dominantly on the molecular weight of the PS seed template. Deformed particles, including collapsed spheres and spheres with holes were obtained when high molecular weight PS seeds were used, whereas well‐defined polymer particles were produced easily by using low molecular weight seeds. The use of 1,1‐diphenylethylene as a chain terminator during seed polymerization is proposed in this work as an efficient method to lower molecular weight of PS in seed particles while keeping seed size small. This low molecular weight seed template retained its spherical geometry after swelling and polymerization with different second stage monomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Hydroxyl Functionalized Uniform‐Porous Beads,Synthesis and Chromatographic Use

Uniform‐porous poly(dihydroxypropyl methacrylate‐co‐ethylene dimethacrylate), poly(DHPM‐co‐EDM) particles were synthesized as an alternative packing material for reversed phase chromatography. In the synthesis, poly(glycidyl methacrylate‐ethylene dimethacrylate), poly(GMA‐co‐EDM) particles were obtained by a multi‐stage swelling and polymerization protocol, the so called “modified seeded polymerization”. For this purpose, 2.4 µm polystyrene seed particles were first swollen by dibutyl phthalate (DBP) and then by a monomer mixture including glycidyl methacrylate and ethylene dimethacrylate. The repolymerization of monomer phase in the swollen seed particles provided porous uniform particles approximately 7 µm in size. Poly(DHPM‐co‐EDM) particles were obtained by the acid hydrolysis of the particles synthesized with different GMA feed concentrations. These particles were used as column‐packing material in the reversed phase separation of alkylbenzenes. The retention factor‐acetonitrile concentration diagrams clearly showed that the polarity of packing material could be controlled by changing the GMA feed concentration in the “modified seeded polymerization”. The packing materials with more hydrophobic character (i.e., poly(EDM) and poly(DHPM‐co‐EDM) particles produced with the GMA feed concentrations up to 20%) exhibited better chromatographic performance in the reversed phase mode.     

Preparation of poly(N‐ethyl methacrylamide) particles via an emulsion/precipitation process: The role of the crosslinker

Monodisperse, thermosensitive poly(N‐ethyl methacrylamide) microgel particles were prepared by the batch precipitation/emulsion polymerization of water‐soluble N‐ethyl methacrylamide and the hydrophobic crosslinker ethylene glycol dimethacrylate initiated by potassium persulfate. Particular attention was paid to the effect of the crosslinker agent on the polymerization process (kinetics, conversion, and water‐soluble oligomer content). Particles were characterized in terms of their size distribution and swelling capacity. A polymerization mechanism for the water‐soluble monomer and non‐water‐soluble crosslinker is proposed and discussed on the basis of a combination of both emulsion and precipitation polymerization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1808–1817, 2002     

Core‐shell microspheres with surface grafted poly(vinyl alcohol) as drug carriers for the treatment of hepatocellular carcinoma

Core(polyvinyl neodecanoate‐ethylene glycol dimethacrylate)‐shell(polyvinyl alcohol) (core (P(VND‐EGDMA))‐shell(PVA)) microspheres were developed by seeded polymerization with the use of conventional free radical and RAFT/MADIX mediated polymerization. Poly(vinyl pivalate) PVPi was grafted onto microspheres prepared via suspension polymerization of vinylneodecanoate and ethylene glycol dimethacrylate. The amount of grafted polymer was found to be independent from the technique used with conventional free radical polymerization and MADIX polymerization resulting into similar shell thicknesses. Both systems—grafting via free radical polymerization or the MADIX process—were found to follow slightly different kinetics. While the free radical polymerization resulted in a weight gain linear with the monomer consumption in solution the growth in the MADIX controlled system experienced a delay. The core‐shell microspheres were obtained by hydrolysis of the poly(vinyl pivalate) surface grafted brushes to form poly(vinyl alcohol). During hydrolysis the microspheres lost a significant amount of weight, consistent with the hydrolysis of 40–70% of all VPi units. Drug loading was found to be independent of the shell layer thickness, suggesting that the drug loading is governed by the amount of bulk material. The shell layer does not appear to represent an obstacle to the drug ingress. Cell testing using colorectal cancer cell lines HT 29 confirm the biocompatibility of the empty microspheres whereas the clofazimine loaded particles lead to 50% cell death, confirming the release of the drug. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3256–3272, 2007     

Poly(vinylphosphonate)s functionalized polymer microspheres via rare earth metal‐mediated group transfer polymerization

We demonstrate a facile, yet efficient method for the functionalization of crosslinked polystyrene (PS) microspheres with biocompatible poly(vinylphosphonate)s via the combination of a UV grafting polymerization and a surface‐initiated group transfer polymerization. Self‐initiated photografting and photopolymerization of ethylene glycol dimethacrylate results in direct photografting of poly(ethylene glycol dimethacrylate) on the PS microspheres with dangling methacrylate functionalities, which are used to immobilize ytterbocene complexes to form the surface‐bound rare‐earth metal catalyst system. The surface‐initiated GTP of dialkyl vinylphosphonates from the initiator system leads to the functionalization of PS microspheres with poly(vinylphosphonate) brushes. Polymerization kinetic investigation indicates that surface‐initiated GTP leads to a constant and remarkably rapid weight gain of the microsphere (a microsphere weight increase of 600% within 3 min), owing to the highly living and efficient character of GTP. The surface‐initiated GTP occurring inside the microsphere causes an accumulation of the tension between the polymer chains in the microsphere, which eventually induces fracture of the microsphere for longer polymerization time. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2919–2925     

One‐pot synthesis of surface‐functionalized molecularly imprinted polymer microspheres by iniferter‐induced “living” radical precipitation polymerization

This article describes for the first time the development of a new polymerization technique by introducing iniferter‐induced “living” radical polymerization mechanism into precipitation polymerization and its application in the molecular imprinting field. The resulting iniferter‐induced “living” radical precipitation polymerization (ILRPP) has proven to be an effective approach for generating not only narrow disperse poly(ethylene glycol dimethacrylate) microspheres but also molecularly imprinted polymer (MIP) microspheres with obvious molecular imprinting effects towards the template (a herbicide 2,4‐dichlorophenoxyacetic acid (2,4‐D)), rather fast template rebinding kinetics, and appreciable selectivity over structurally related compounds. The binding association constant K_a and apparent maximum number N_max for the high‐affinity sites of the 2,4‐D imprinted polymer were determined by Scatchard analysis and found to be 1.18 × 10⁴ M^?1 and 4.37 μmol/g, respectively. In addition, the general applicability of ILRPP in molecular imprinting was also confirmed by the successful preparation of MIP microspheres with another template (2‐chloromandelic acid). In particular, the living nature of ILRPP makes it highly useful for the facile one‐pot synthesis of functional polymer/MIP microspheres with surface‐bound iniferter groups, which allows their direct controlled surface modification via surface‐initiated iniferter polymerization and is thus of great potential in preparing advanced polymer/MIP materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3217–3228, 2010     

Magnetic poly(2‐hydroxyethyl methacrylate‐co‐ethylene dimethacrylate) microspheres by dispersion polymerization

Crosslinked poly(2‐hydroxyethyl methacrylate)‐based magnetic microspheres were prepared in a simple one‐step procedure by dispersion polymerization in the presence of several kinds of iron oxides. Cellulose acetate butyrate and dibenzoyl peroxide were used as steric stabilizer and polymerization initiator, respectively, and ethylene dimethacrylate was a crosslinking agent. The resulting product was characterized in terms of particle size, particle size distribution, iron(III) content, and magnetic properties. In the presence of needle‐like maghemite in the polymerization mixture and under suitable conditions, magnetic microspheres with relatively narrow size distribution were formed. An increase in the particle size and, at the same time, a decrease in molecular weight of uncrosslinked polymers resulted, as the continuous phase became richer in 2‐methylpropan‐1‐ol. Coercive force of needle‐like maghemite‐containing particles was higher than that of cubic magnetite‐loaded microspheres. Coercive force increased with the decreasing iron content in the particles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1161–1171, 2000     

Semi‐micro reversed‐phase liquid chromatography for the separation of alkyl benzenes and proteins exploiting methacrylate‐ and polystyrene‐based monolithic columns

Monolithic columns were synthesized inside 1.02 mm internal diameter fused‐silica lined stainless‐steel tubing. Styrene and butyl, hexyl, lauryl, and glycidyl methacrylates were the functional monomers. Ethylene glycol dimethacrylate and divinylbenzene were the crosslinkers. The glycidyl methacrylate polymer was modified with gold nanoparticles and dodecanethiol (C₁₂). The separation of alkylbenzenes was investigated by isocratic elution in 60:40 v/v acetonitrile/water. The columns based on polystyrene‐co‐divinylbenzene and poly(glycidyl methacrylate)‐co‐ethylene glycol dimethacrylate modified with dodecanethiol did not provide any separation of alkyl benzenes. The poly(hexyl methacrylate)‐co‐ethylene glycol dimethacrylate and poly(lauryl methacrylate)‐co‐ethylene glycol dimethacrylate columns separated the alkyl benzenes with plate heights between 30 and 60 μm (50 μL min^?1 and 60°C). Similar efficiency was achieved in the poly(butyl methacrylate)‐co‐ethylene glycol dimethacrylate column, but only at 10 μL min^?1 (0.22 mm s^?1). Backpressures varied from 0.38 MPa in the hexyl methacrylate to 13.4 MPa in lauryl methacrylate columns (50 μL min^?1 and 60°C). Separation of proteins was achieved in all columns with different efficiencies. At 100 μL min^?1 and 60°C, the lauryl methacrylate columns provided the best separation, but their low permeability prevented high flow rates. Flow rates up to 500 μL min^?1 were possible in the styrene, butyl and hexyl methacrylate columns.     

Monodisperse polystyrene microspheres prepared by dispersion polymerization with microwave irradiation

Monodisperse polystyrene microspheres with diameters of 200–500 nm were prepared by dispersion polymerization with microwave irradiation with poly(N‐vinylpyrrolidone) as a steric stabilizer and 2,2′‐azobisisobutyronitrile as a radical initiator in an ethanol/water medium. The morphology, size, and size distribution of the polystyrene microspheres were characterized with transmission electron microscopy and photon correlation spectroscopy, and the formed films of the polystyrene dispersions were characterized with atomic force microscopy. The effects of the monomer concentration, stabilizer concentration, and initiator concentration on the size and size distribution of the polystyrene microspheres were investigated. The polystyrene microspheres prepared by dispersion polymerization with microwave irradiation were smaller, more uniform, and steadier than those obtained with conventional heating. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2368‐2376, 2005     

Surface-modified hemispherical polystyrene/polybutyl methacrylate composite particles

Micrometer-sized polystyrene/poly(n-butyl methacrylate) composite particles of hemisphere morphology and narrow size distribution were prepared by a process of single-step swelling of uniform polystyrene template microspheres with emulsion droplets of the monomer n-butyl methacrylate containing the initiator benzoyl peroxide in the presence, or absence, of the co-swelling agent toluene. Butyl methacrylate was then polymerized at 73 degrees C within the template microspheres. Surface and bulk characterization of the particles were performed by methods such as FTIR, elemental analysis, XPS, advancing contact angle, light microscope, SEM, and cross-sectional TEM. Selective surface functionalization of the poly(n-butyl methacrylate) phase of the composite particles was performed by carrying out a similar swelling and polymerization process in the presence of a water-soluble vinylic monomer such as acrylamide.     

Synthesis of amphiphilic copolymer brushes: Poly(ethylene oxide)‐graft‐polystyrene

A well‐defined amphiphilic copolymer brush with poly(ethylene oxide) as the main chain and polystyrene as the side chain was successfully prepared by a combination of anionic polymerization and atom transfer radical polymerization (ATRP). The glycidol was first protected by ethyl vinyl ether to form 2,3‐epoxypropyl‐1‐ethoxyethyl ether and then copolymerized with ethylene oxide by the initiation of a mixture of diphenylmethylpotassium and triethylene glycol to give the well‐defined polymer poly(ethylene oxide‐co‐2,3‐epoxypropyl‐1‐ethoxyethyl ether); the latter was hydrolyzed under acidic conditions, and then the recovered copolymer of ethylene oxide and glycidol {poly(ethylene oxide‐co‐glycidol) [poly(EO‐co‐Gly)]} with multiple pending hydroxymethyl groups was esterified with 2‐bromoisobutyryl bromide to produce the macro‐ATRP initiator [poly(EO‐co‐Gly)_(ATRP). The latter was used to initiate the polymerization of styrene to form the amphiphilic copolymer brushes. The object products and intermediates were characterized with ¹H NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, Fourier transform infrared, and size exclusion chromatography in detail. In all cases, the molecular weight distribution of the copolymer brushes was rather narrow (weight‐average molecular weight/number‐average molecular weight < 1.2), and the linear dependence of ln[M₀]/[M] (where [M₀] is the initial monomer concentration and [M] is the monomer concentration at a certain time) on time demonstrated that the styrene polymerization was well controlled. This method has universal significance for the preparation of copolymer brushes with hydrophilic poly(ethylene oxide) as the main chain. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4361–4371, 2006     

Effect of reaction parameters on the dispersion polymerization of 1‐vinyl‐2‐pyrrolidone

Nonporous hydrogel microspheres 0.1–1.3 μm in diameter were prepared by the dispersion copolymerization of 1‐vinyl‐2‐pyrrolidone and ethylene dimethacrylate as a crosslinking agent. The crosslinking was evidenced by solid state ¹³C NMR and elemental analysis. The effect of various parameters including selection of solvent (cyclohexane, butyl acetate), initiator (4,4′‐azobis(4‐cyanopentanoic acid), 2,2′‐azobisisobutyronitrile, dibenzoyl peroxide) and stabilizer on the properties of resulting microspheres has been studied. Dynamic light scattering and photographic examination were used for determination of the diameter and polydispersity of microspheres. Increasing concentration of steric stabilizer in the initial polymerization mixture decreased the particle size. The particle size depended on the molecular weight of polystyrene‐block‐hydrogenated polyisoprene stabilizer, but not on the number of PS and polybutadiene blocks in the styrene–butadiene block copolymer stabilizers. Dibenzoyl peroxide used as an initiator resulted in agglomeration of particles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 653–663, 2000     

Hydrophobic‐hydrophilic monolithic dual‐phase layer for two‐dimensional thin‐layer chromatography coupled with surface‐enhanced Raman spectroscopy detection

Hydrophobic‐hydrophilic monolithic dual‐phase plates have been prepared by a two‐step polymerization method for two‐dimensional thin‐layer chromatography of low‐molecular‐weight compounds, namely, several dyes. The thin 200 μm poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) layers attached to microscope glass plates were prepared using a UV‐initiated polymerization method within a simple glass mold. After cutting and cleaning the specific area of the layer, the reassembled mold was filled with a polymerization mixture of butyl methacrylate and ethylene dimethacrylate and subsequently irradiated with UV light. During the second polymerization process, the former layer was protected from the UV light with a UV mask. After extracting the porogens and hydrolyzing the poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) area, these two‐dimensional layers were used to separate a mixture of dyes with great difference in their polarity using reversed‐phase chromatography mode within the hydrophobic layer and then hydrophilic interaction chromatography mode along the hydrophilic area. In the latter dimension only the specific spot was developed further. Detection of the separated dyes could be achieved with surface‐enhanced Raman spectroscopy.     

Poly(N,N‐diethylacrylamide) microspheres by dispersion polymerization

Poly(N,N‐diethylacrylamide)‐based microspheres were prepared by ammonium persulfate (APS)‐initiated and poly(vinylpyrrolidone) (PVP)‐stabilized dispersion polymerization. The effects of various polymerization parameters, including concentration of N,N′‐methylenebisacrylamide (MBAAm) crosslinker, monomer, initiator, stabilizer and polymerization temperature on their properties were elucidated. The hydrogel microspheres were described in terms of their size and size distribution and morphological and temperature‐induced swelling properties. While scanning electron microscopy was used to characterize the morphology of the microspheres, the temperature sensitivity of the microspheres was demonstrated by dynamic light scattering. The hydrodynamic particle diameter decreased sharply as the temperature reached a critical temperature ～ 30 °C. A decrease in the particle size was observed with increasing concentration of both the APS initiator and the PVP stabilizer. The microspheres crosslinked with 2–15 wt % of MBAAm had a fairly narrow size distribution. It was found that the higher the content of the crosslinking agent, the lower the swelling ratio. High concentration of the crosslinker gave unstable dispersions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6263–6271, 2008     

Poly(glycidyl methacrylate‐co‐N‐methylolacrylamide‐co‐ethylene dimethacrylate) monolith coupled to high‐performance liquid chromatography for the determination of adenosine phosphates in royal jelly

A polymer monolith microextraction method coupled with high‐performance liquid chromatography was developed for the determination of adenosine triphosphate, adenosine diphosphate, and adenosine monophosphate. The monolithic column was synthesized inside fused‐silica capillaries using thermal initiation free‐radical polymerization with glycidyl methacrylate as the monomer, ethylene dimethacrylate as the cross‐linker, cyclohexanol, and 1‐dodecanol as the porogen. N‐Methylolacrylamide, an important hydrophilic monomer, was incorporated into the polymerization mixture to enhance the hydrophilicity of the poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) column. The obtained poly(glycidyl methacrylate‐co‐N‐methylolacrylamide‐co‐ethylene dimethacrylate) monolith was characterized by scanning electron microscopy, Fourier‐transform infrared spectra, and X‐ray photoelectron spectroscopy. Optimum conditions for the preconcentration and separation of the target adenosines were also investigated. Under the optimum conditions, we obtained acceptable linearities, low limits of detection, and good relative standard deviations. The developed polymer monolith microextraction with high‐performance liquid chromatography method exhibited a good performance with recovery values in the range of 76.9?104.7% when applied to the determination of the adenosines in five royal jelly samples.