Role of cationic and nonionic surfactants on biocidal efficiency in diesel-water interface

Biodegradation occurs at the interface between diesel and water. The microbial contamination can result in inhibitor/fuel degradation that leads to the unacceptable level of turbidity, filter plugging, corrosion of storage tanks, pipeline and souring of stored products. Hence, selection of biocides/inhibitors is an important aspect in petroleum product transporting pipeline. Three biocides (cationic and nonionic) were employed to study the biodegradation of diesel in diesel–water interface. The biocidal efficiency on biodegradation of diesel was examined using Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR) and gas chromatography mass spectrometry (GC–MS). Polyoxyethyleneglycol dodecyl ether [BRIJ-35] and polyethylene glycol-p-isooctylphenyl ether [TRITON-X-100] had higher bactericidal efficiency than Dodecyl ethyl dimethyl ammonium bromide [DDAB]. But the cationic biocide (DDAB) gave good biocidal efficiency at the interface. The data are explained in terms of a model that postulates the formation of “micelle” at the diesel–water interface.     

Tributyltin(IV)[3‐(3′,5′‐dimethylphenylamido)propanoate] as a potent HCV inhibitor,its delivery study,controlled release and binding sites using CTAB as a standard cell membrane

Gaussia luciferase assay was used to measure the anti‐hepatitis C (anti‐HCV) potency of tributyltin(IV)[3‐(3′,5′‐dimethylphenylamido)propanoate] in infected Huh 7.5 cells (human hepatocellular cell). Interaction of the organotin(IV) complex with cetyl N,N,N‐trimethylammonium bromide (CTAB) micelles was studied using UV–visible and steady‐state florescence spectroscopy. The anti‐HCV study showed a log IC₅₀ value of 0.96 nm for the complex. The complex–CTAB interaction parameter showed that partition of the complex from bulk water to the CTAB micelle was a spontaneous process, and the red shift in visible spectra of the complex confirmed its increased solubility into micelles. Copyright © 2013 John Wiley & Sons, Ltd.     

卵清蛋白与离子型表面活性剂的相互作用

本文通过荧光光谱法、紫外-可见吸收光谱法和透射电镜并结合电导率测定分别研究了水中卵清蛋白与阴离子表面活性剂十二烷基硫酸钠（SDS）和阳离子表面活性剂十二烷基三甲基溴化铵（DTAB）和十六烷基三甲基溴化铵（CTAB）之间的相互作用。研究结果表明卵清蛋白可以增加SDS和CTAB的临界胶束浓度,但对DTAB的临界胶束浓度没有影响。阴离子表面活性剂可以使卵清蛋白构象完全伸展,而阳离子表面活性剂却不具备此种作用。表面活性剂单体与卵清蛋白的相互作用强于表面活性剂胶束与卵清蛋白的相互作用。     

Micellar‐accelerated hydrolysis of organophosphate and thiophosphates by pyridine oximate

Rate constants for the hydrolysis reaction of phosphate (paraoxon) and thiophosphate (parathion, fenitrothion) esters by oximate (pyridinealdoxime 2‐PyOx⁻ and 4‐PyOx⁻) and its functionalized pyridinium surfactants 4‐(hydroxyimino) methyl)‐1‐alkylpyridinium bromide ions (alkyl = C_nH_2n+1, n = 10, 12, 14, 16) have been measured kinetically at pH 9.5 and 27°C in micellar media of cationic surfactants cetyltrimethylammonium bromide (CTAB) and cetylpyridinium bromide (CPB). Acid dissociation constant, pK_a, of oximes has also been determined by spectrophotometric, kinetic, and potentiometric methods. The rate acceleration effects of cationic micelles have been explored. Cationic micelles of the pyridinium head group (CPB) showed a large catalytic effect than the ammonium head group (CTAB). The effects of pH, oximate concentration, and surfactants have been discussed.     

羧甲基淀粉与十六烷基三甲基溴化铵的相互作用研究

通过电导法、粒度法、光谱及热分析等方法研究了羧甲基淀粉与十六烷基三甲基溴化铵之间的相互作用。结果表明,在较低表面活性剂浓度下,静电作用使得羧甲基淀粉与十六烷基三甲基溴化铵发生复合,这一浓度比单一表面活性剂的临界胶束浓度（cmc）低1个数量级;但随表面活性剂的增加,复合物溶液经历澄清-混浊-澄清过程,说明表面活性剂起到了...     

Quenching of zinc phthalocyanine excited states by viologen surfactant assemblies——The influence of microenvironment

A series of functional surfactants of N-alkyl-N'-butyl viologens has been synthesized.The quenching of excited singlet and triplet states of zinc phthalocyanine was studied in DMSOand in mixed micelles containing the functional surfactant as one and cationic cetyl trimethylam-monium bromide(CTAB),anionic sodium dodecylsulfate(SDS)and neutral TX-100 surfactantas the other component.Fluorescence quenching and laser photolysis studies indicate that thefunctional surfactants are solubilized at different sites in micelles,the process depends on chainlength and exerts great influence on the quenching of zinc phthalocyanine excited states.     

Kinetics of basic hydrolysis of tris(1,10‐phenanthroline)iron(II) in macromolecular assemblies of CTAB

The kinetics of basic hydrolysis of tris(1,10‐phenanthroline)iron(II) has been carried out in aqueous, N‐cetyl‐N,N,N‐trimethyl ammonium bromide (CTAB) micellar, and CTAB reverse micellar media by UV–visible spectroscopy system. The reaction follows the overall second‐order kinetics; first order in each Fe(II) complex and the base (^?OH). CTAB micelles catalyze the reaction rate through the adsorption of the Fe(II) complex and the hydroxyl ions on the micellar surface. In the reverse micellar medium, interesting physicochemical features are observed. Being ionic nature of reactants, both the reactants prefer to stay and react inside the water pool in place of the hydrophobic environment. The rate increases with w, that is, the size of the water pool, attains a maximum value at w = 8.33, and then decreases. But the rate increases as the concentration of surfactant increases at fixed w values. For a better explanation of the kinetic data, the activation parameters, standard enthalpy of activation (Δ^?H°), standard entropy of activation (Δ^?S°), and energy of activation (E_a) were determined. All kinetic data corroborate the proposed mechanism. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 579–589, 2011     

Kinetic Screening for the Acid‐Catalyzed Hydrolysis of Some Hydrophobic Fe(II) Schiff Base Amino Acid Chelates and Reactivity Trends in the Presence of Alkali Halide and Surfactant

Kinetics of acid‐catalyzed hydrolysis of some high‐spin Fe(II) Schiff base amino acid complexes were followed spectrophotometrically at 298 K under pseudo–first‐order conditions. The studied ligands were derived from the condensation of 5‐bromosalicylaldehyde with different four amino acids (phenylalanine, aspartic acid, histidine, and arginine). The acid hydrolysis reaction was studied in aqueous media and in the presence of different concentrations of the alkali halide (KBr) and cationic surfactant (cetyl‐trimethyl ammonium bromide, CTAB). The general rate equation was suggested to be rate = k_obs[complex], where k_obs = k₂[H⁺]. The increase in [KBr] enhances the reactivity of the reaction, and the addition of CTAB to the reaction mixture accelerates the reaction reactivity. The obtained kinetic data were used to determine the values of δ_mΔG^# (the change in the activation barrier) for the studied complexes when transferred from “water to water containing different [KBr]” and from “water to water containing altered [CTAB].”     

The Inhibition of the Hydrolysis of Cephanone by CTAB/n‐C5H11OH/H2O Microemulsion

Abstract

The hydrolysis of cephanone in water, cetyl trimethyl ammonium bromide (CTAB) micelle, and CTAB/n‐C₅H₁₁OH/H₂O O/W microemulsion was studied through UV‐VIS absorption spectroscopy. The mechanism of the hydrolysis and the effects of both the acidity of the media and the composition of O/W microemulsion on the hydrolysis were studied. The results show that the hydrolysis rate of cephanone increases with the acidity. Compared with water, CTAB micelle and CTAB/n‐C₅H₁₁OH/H₂O O/W microemulsion suppress this hydrolysis. The inhibition of the hydrolysis of cephanone by CTAB micelle and CTAB/n‐C₅H₁₁OH/H₂O O/W microemulsion is related to the location of cephanone in the interphases of CTAB micelles and CTAB/n‐C₅H₁₁OH/H₂O O/W microemulsion droplets.     

Mixing Behavior of Conventional and Gemini Cationic Surfactants

Micellization behavior of cationic monomeric surfactants, hexadecyltrimethylammonium bromide (CTAB), cetylpyridinium bromide (CPB), cetylpyridinium chloride (CPC), tetradecyltrimethylammonium bromide (TTAB), and dimeric (gemini) cationic surfactant pentamethylene‐1, 5‐bis(hexadecyldimethylammonium bromide) with formula C₁₆H₃₃(CH₃)₂N⁺(CH₂)₅N⁺(CH₃)₂C₁₆H₃₃ · 2Br^?, abbreviated as 16‐5‐16, in mixed states (binary) have been studied by conductivity. The micellar compositions, activities of the components, and their mutual interactions have been estimated from Rubingh's theory. The mixtures show nonideal behavior with favorable interactions.     

Synthesis of a novel series of polymerizable surfactants and application in emulsion polymerization

A series of polymerization surfactants (surfmers) was synthesized, whose structures combined the characteristics of polyoxyethylene as nonionic group and quaternary ammonium a as cationic group. The structures of the product were confirmed by MS, and the content of cationic‐activity matter was determined by two‐phase titration. The surfmers were then used with constant addition profiles in semicontinuous polymerization of vinyl acetate–butyl acrylate–Veova 10–hexafluorobutyl methacrylate, and the polydispersity indexes (PDI) were lower than 0.1. The particle size, amount of coagulum, and stability against electrolyte and freeze/thaw were evaluated. As a reference, an unreactive surfactant cetyl trimethyl ammonium bromide (CTAB) was also used for the polymerization. Compared to CTAB, the surfmers behaved much better. Not only stabilities to electrolyte and water resistance were improved, but also freeze/thaw stability got a superior performance. Copyright © 2008 John Wiley & Sons, Ltd.     

Modulated photophysics of 3-pyrazolyl-2-pyrazoline derivative entrapped in micellar assembly

The photophysical behavior of 3-pyrazolyl-2-pyrazoline derivative (PZ), a newly synthesized biologically active compound has been studied in micellar solutions of anionic sodium dodecyl sulfate (SDS), cationic cetyl trimethylammonium bromide (CTAB) and nonionic p- tert-octylphenoxy polyoxyethanol (Triton X-100, TX-100) micelle using steady state and time-resolved fluorescence spectroscopy technique. Influence of the micelles on the photophysics of PZ has also been investigated using different approaches. The location of the fluorophore PZ in the micelle has been identified by cetyl pyridinium chloride (CpCl) induced fluorescence quenching and micropolarity surrounding that fluorophore in micellar solution. The effect of urea on the steady state fluorescence and relaxation dynamics of the micelle bound probe has also been observed. The results have been interpreted in terms of the model that urea displaces water molecules from the micellar interface and the consequent destabilization leads to the expulsion of the probe molecules from the interfacial region. An attempt has been made to determine probe sensing microviscosities for these micellar microenvironments in the light of average reorientation times of the probe PZ.     

Interactions between Hydrophobically Modified Associating Polyacrylamide and Cationic Surfactant at the Water‐Octane Interface: Interfacial Dilational Viscoelasticity and Relaxation Processes

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2‐ethylhexyl acrylate (EHA) (<1.0 mol%) with a hydrolyzed degree of about 1.5–2.0% at the octane‐water interfaces were investigated by means of two methods: the interfacial tension response to sinusoidal area variations (oscillating barriers method) and the relaxation of an applied stress (interfacial tension relaxation method) respectively. The influence of cationic surfactant cetyl trimethylammonium bromide (CTAB) on the dilational viscoelastic properties was studied. The results obtained by oscillating barriers method showed that dilational modulus decreased moderately with the increase of CTAB concentration. The results obtained by interfacial tension relaxation measurements showed that two main relaxation processes exist in the interface at 7,000 ppm polymer concentration: one is the fast process involving the exchange of hydrophobic blocks between the proximal region and distal region in the interface; the other is the slow relaxation process involving conformational changes of polymer chain in the interface. By adding CTAB, the slow process changed obviously due to the strong electrostatic interaction between oppositely charged surfactant and hydrolyzed part of polymer chain. Only when the CTAB concentration was close to the “equal charge point,” the associations formed mainly by the hydrophobic interaction like that in SDS/polymer system appeared and the characteristic time of fast process decreased obviously. The information of relaxation processes obtained from interfacial tension relaxation measurements can explain the results from dilational viscoelasticity measurements very well.     

阳离子表面活性剂混合胶团对2,4-二硝基氯苯水解反应的 催化作用

研究了阳离子表面活性剂混合胶团对2,4-二硝基氯苯(DNCB)碱性水解反应的催化作用。结果表明：(1)在十六烷基三甲基溴化铵(CTAB)和十六烷基溴化吡啶(CPB)混合溶液中DNCB水解一级速率常数k1与混合胶团中CTAB或CPB的摩尔分数有直线关系,表面活性剂形成理想的混合胶团。(2)辛基三甲基省化铵(OTAB)与CTAB,CPB的cmc值相差很大,在它们的混合胶团中OTAB含量极少,DNCB水解k1与CPB/OTAB混合胶团中CPB摩尔分数的关系与直线呈负偏差。(3)在CTAB(或CPB)与OTAB混合体系中OTAB起溴盐作用,使催化活性降低。用假相离子交换(PIE)模型对所得结果给出了定量的处理和解释。     

Kinetics of hydrolysis of procaine in aqueous and micellar media

The kinetics of alkaline hydrolysis of procaine under the pseudo–first‐order condition ([OH^?] ? [procaine]) has been carried out. N,N‐Diethylaminoethanol and p‐aminobenzoate anion were obtained as the hydrolysis product. The rate of hydrolysis was found to be linearly dependent upon [NaOH]. The addition of cationic cetyltrimethylammonium bromide (CTAB), dodecyltrimethylammonium bromide (DDTAB) and tetradecyltrimethylammonium bromide, and anionic sodium dodecyl sulfate (SDS) micelles inhibited the rate of hydrolysis. The maximum inhibitive effect on the reaction rate was observed for SDS micelles, whereas among the cationic surfactants, CTAB inhibited most. The variation in the rate of hydrolysis of procaine in the micellar media is attributed to the orientation of a reactive molecule to the surfactant and the binding constant of procaine with micelles. The rate of hydrolysis of procaine is negligible in DDTAB micelles. The observed results in the presence of cationic micelles were treated on the basis of the pseudophase ion exchange model. The results obtained in the presence of anionic micelles were treated by the pseudophase model, and the various kinetic parameters were determined. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 45: 1–9, 2013     

Encapsulation of curcumin in cationic micelles suppresses alkaline hydrolysis

The alkaline hydrolysis of curcumin was studied in three types of micelles composed of the cationic surfactants cetyl trimethylammonium bromide (CTAB) and dodecyl trimethylammonium bromide (DTAB) and the anionic surfactant sodium dodecyl sulfate (SDS). At pH 13, curcumin undergoes rapid degradation by alkaline hydrolysis in the SDS micellar solution. In contrast, alkaline hydrolysis of curcumin is greatly suppressed in the presence of either CTAB or DTAB micelles, with a yield of suppression close to 90%. The results from fluorescence spectroscopic studies reveal that while curcumin remains encapsulated in CTAB and DTAB micelles at pH 13, curcumin is dissociated from the SDS micelles to the aqueous phase at this pH. The absence of encapsulation and stabilization in the SDS micellar solution results in rapid hydrolysis of curcumin.     

Reactivity of supramolecular systems based on calix[4]resorcinarene derivatives and surfactants in hydrolysis of phosphorus acid esters

The formation of mixed micelles of amphiphilic calix[4]resorcinarenes with aminomethyl (AMC, PAMC), tris(hydroxymethyl)amide (THAC) fragments and the cationic surfactant cetyl trimethylammonium bromide (CTAB) in water and aqueous DMF solutions (10-50% DMF) leads to the decrease of the critical micelle concentration of the systems and the increase of the size of the mixed micelles in comparison with CTAB micelles. The catalytic activity of the mixed systems in the hydrolysis of phosphorus acid esters is higher than those of CTAB micelle and AMC, PAMC or THAC aggregates.     

Micellization and mixed micellization of cationic gemini (dimeric) surfactants and cationic conventional (monomeric) surfactants: Conductometric,dye solubilization,and surface tension studies

In the present study, we have investigated the self-association, mixed micellization, and thermodynamic studies of a cationic gemini (dimeric) surfactant, hexanediyl-1,6-bis(dimethylcetylammonium bromide (16-6-16)) and a cationic conventional (monomeric) surfactant, cetyltrimethylammonium bromide (CTAB). The critical micelle concentration (CMC) of pure (16-6-16 and CTAB) and mixed (16-6-16+CTAB) surfactants was measured by electrical conductivity, dye solubilization, and surface tension measurements. The surface properties (viz., C₂₀ (the surfactant concentration required to reduce the surface tension by 20 mN/m), Π_CMC (the surface pressure at the CMC), Γ_max (maximum surface excess concentration at the air/water interface), A_min (the minimum area per surfactant molecule at the air/water interface), etc.) of micellar (16-6-16 or CTAB) and mixed micellar (16-6-16+CTAB) surfactant systems were evaluated. The thermodynamic parameters of the micellar (16-6-16 and CTAB) and mixed micellar (16-6-16+CTAB) surfactant systems were also evaluated.     

Binary Coalescence of Water Drops in Organic Media in Presence of Ionic Surfactants and Salts

Binary coalescence of water drops in o‐xylene and toluene, and ethylene glycol drops in toluene were studied in this work. The effects of cationic and anionic surfactants on coalescence time were studied. Cetyl trimethyl ammonium bromide (CTAB) and cetyl pyridinium bromide (CPyBr) were used as cationic surfactants. Sodium dodecyl benzene sulfonate (SDBS) was used as the anionic surfactant. The effects of salts (NaCl and CaCl₂) containing monovalent and divalent ions on coalescence were investigated. The coalescence time was found to follow distributions in each of these experiments. The minimum and maximum values of the distributions were largely different. The stochastic model developed earlier by us was used to fit the distributions. The effects of the physical properties of the system (such as density, size of the drops, interfacial tension, and surface excess of adsorbed surfactant) on the model parameters were discussed.     

ESPT of 2-(2'-pyridyl)benzimidazole at the Micelle-Water interface: selective enhancement and slow dynamics with sodium dodecyl sulfate

The effect of micellar environment on the excited state proton transfer (ESPT) of 2-(2'-pyridyl)benzimidazole (2PBI) has been investigated by steady state and time resolved fluorescence spectroscopy. The ESPT, which occurs to a rather small extent at pH 7, is found to be enhanced remarkably at the interface of sodium dodecyl sulfate (SDS) micelles and water. Such an enhancement is not observed for the cationic cetyl trimethyl ammonium bromide (CTAB) or neutral Triton X-100 micelles. This selective enhancement is explained in the light of a modification of pK(a) and a more acidic local pH in the micelle-water interface. A rise time of about 890 ps is observed in the region of tautomer emission. The origin of this rise time is explored, considering three factors, namely, diffusion controlled protonation of the normal form of 2PBI, slow and possibly incomplete solvation of the transition state, leading to a slowing down of the proton transfer process and a similar slow dynamics of the tautomeric excited state.