Synthesis and surface antimicrobial activity of a novel perfluorooctylated quaternary ammonium silane coupling agent

A novel perfluorooctyl-containing quaternary ammonium salt was designed and synthesized, which was applied as a surface modification agent to provide the treated cotton fabrics with antimicrobial activity and low critical surface energy.     

Fluorinated comblike homopolymers: The effect of spacer lengths on surface properties

A series of polyacrylate monomers with F‐alkylalkyl [F(CF₂)_n(CH₂)_n′] side groups were prepared by free‐radical polymerization. The effect of the chemical structure on the surface properties of poly(ethylene terephthalate)s was evaluated by variations in the relative length of the fluorocarbon and hydrocarbon units in the side group. The resulting polymers were quite surface‐active in the solid state. The surface and bulk organization was investigated by X‐ray photoelectron spectroscopy analysis. A strong correlation between the bulk organization and surface properties of the polymers was established. The outmost layer, formed from trifluoromethyl groups and some ester functions, suggests that the side chain is arranged irregularly in the polymer–air interface. The length of the lateral chain governs this organization: long fluorinated chains and short hydrocarbon spacers are essential elements of the molecular design for such low‐surface‐energy materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3737–3747, 2005     

Lipophilic counterion effect on aggregation and adsorption behavior of quaternary ammonium surfactants

The obvious different aggregation and adsorption behavior of six newly quaternary ammonium surfactants with different lipophilic counterions has been discoverd by measurements of equilibrium and dynamic surface tension, fluorescence and conductivity. Interestingly, the critical micelle concentration (CMC) and its surface tension γ_CMC decrease with the increasing counterion chain length. However, three methods have confirmed that an exception of CMC increases slightly from C₁₆NC₁ to C₁₆NC₂. According to experimental results, a balanced mechanism between hydrophobicity and electrostatic of counterion is proposed. Besides, the dynamic surface tension results show the diffusion coefficient increases with the increasing counterion length both at a short time (D_t?→?0) and long time (D_t?→?∞), which indicates a faster adsorption process. Unlike the inorganic counterion, the diffusion coefficient decreases with the increase of hydrophobic chain length. This is attributed to the strong electrostatic interactions between counterions and cationic headgroups.     

The Electrochemical Grafting of a Mixture of Substituted Phenyl Groups at a Glassy Carbon Electrode Surface

Two‐component substituted aryl groups are simultaneously grafted onto the surface of a glassy carbon electrode by electrochemical reduction of a binary mixture of two aryl diazonium salts in acetonitrile. The electrochemical deposition is achieved potentiostatically and two different mixtures with four different ratios of diazonium salts are used. The binary mixtures comprise: 1) 4‐nitrophenyl diazonium and 4‐bromophenyl diazonium cations and 2) 4‐bromophenyl diazonium and N,N‐diethylaniline diazonium cations. The chemical composition of the two component films is determined by cyclic voltammetry in an electrolyte inert for electroactive groups such as nitrophenyl and bromophenyl. X‐ray photoelectron spectroscopy is also used to evaluate the surface concentration of each grafted substituted phenyl group. The surface concentration of the substituted phenyl group for which the corresponding diazonium cation is the most easily reduced is higher than its concentration in the mixture of the deposition solution. The usefulness of binary films is also discussed.     

基于链状氨基酸N-手性季铵盐合成中的取代反应研究

手性季铵盐作为相转移催化剂(Phase-transfer catalysts ,PTC) 能使非均相反应在温和条件下进行,操作简单,反应速率加快,产率明显提高,因此这一技术在有机合成中具有广泛的应用.这些季铵盐主要是以金鸡钠生物碱衍生的[1,2],近年来出现了一些其它类型的季铵盐[3],但是它们的制备一般比较困难,大多数催化效果不是很理想;并且这些季铵盐的结构有一定局限,改造比较困难.同时这些季铵盐大都是 C-手性的,很少有N-手性的[4,5];在以前的不对称反应中,有意识地构建N-手性季铵盐及N-手性在不对称反应中的作用鲜有报道[6].     

On the correlation of surface charge and energy in non‐thermal plasma‐treated polyethylene

Non‐thermal non‐equilibrium oxidative air 40‐kHz frequency, 13.56‐MHz radiofrequency and 2.46‐GHz microwave discharge plasma treatment were used for modifying low‐density polyethylene foils. The untreated and treated samples were chemically characterised by X‐ray photoelectron spectroscopy. In order to estimate the extent of the plasma sources at distinct treatment times, surface charge and energy were determined by zeta potential (ζ) and surface tension measurements. In addition, the isoelectric points (IEPs) of the studied samples were ascertained, and surface property variations were appraised by ageing time. The overall outcome indicated that ζ‐potential and surface energy progressively changed after each treatment, as well as the influences of ageing on surface features, the IEP shifting to lower pH values and how all of these changes are associated with the new surface chemistry. This contribution seeks to shed light on topics related to polymer science and plasma‐based strategies for surface modification. Copyright © 2014 John Wiley & Sons, Ltd.     

Influence of Substituents and Functional Groups on the Surface Composition of Ionic Liquids

We have performed a systematic study addressing the surface behavior of a variety of functionalized and non‐functionalized ionic liquids (ILs). From angle‐resolved X‐ray photoelectron spectroscopy, detailed conclusions on the surface enrichment of the functional groups and the molecular orientation of the cations and anions is derived. The systems include imidazolium‐based ILs methylated at the C2 position, a phenyl‐functionalized IL, an alkoxysilane‐functionalized IL, halo‐functionalized ILs, thioether‐functionalized ILs, and amine‐functionalized ILs. The results are compared with the results for corresponding non‐functionalized ILs where available. Generally, enrichment of the functional group at the surface is only observed for systems that have very weak interaction between the functional group and the ionic head groups.     

Effect of the chemical nature and length of spacer arms on the covalent grafting of fluorinated molecular probes at the surface of poly(ethylene terephthalate) membrane

A series of fluorinated molecular probes were synthesized that are characterized by spacer arms of various lengths and polarities. Previous molecules ( 1 , 2a , 2b , 2c , 3a , 3b ) were covalently fixed on the surface of poly(ethylene terephthalate) (PET) membranes via activated hydroxyl chain endings. X‐ray photoelectron microscopic analysis of the grafted samples allowed us to quantify the PET surface reactivity; the results were within 40–50 pmol/cm² of fixed probes, independent of the length and hydrophilicity of the spacer arms. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 770–781, 2002; DOI 10.1002/pola.10156     

The effect of localized lateral growth of multiwalled carbon nanotubes with ammonia plasma post‐treatment

We present horizontally‐oriented multiwalled carbon nanotubes (CNTs) grown by means of thermal chemical vapor deposition. The CNT is across the trenches of the catalytic metals on predefined Ti electrodes. The properties of the lateral multiwalled CNT, following post‐ammonia plasma treatment, are reported. Information about the ammonia plasma treated on the interface structure of CNT is obtained using X‐ray photoelectron spectroscopy. The experimental results show that upon exposure to ammonia, the electrical property of the CNT is found to increase. Copyright © 2012 John Wiley & Sons, Ltd.     

Report on the 47th IUVSTA Workshop ‘Angle‐Resolved XPS: the current status and future prospects for angle‐resolved XPS of nano and subnano films’

A summary of the workshop entitled ‘Angle‐Resolved XPS: The Current Status and Future Prospects for Angle‐resolved XPS of Nano and Subnano Films’ is given, which was held at the Riviera Maya, Mexico, 26–30 March 2007, under the main sponsorship of the International Union for Vacuum Science, Technique and Applications (IUVSTA). Angle‐resolved X‐ray photoelectron spectroscopy (ARXPS) can provide detailed chemical as well as depth profile information about the near‐surface composition of materials and thin films. This workshop was held to review the present status and level of understanding of Angle‐resolved XPS, and to stimulate discussions leading to a deeper understanding of current problems and new solutions. The main goal of the workshop was to find better ways to perform experiments and, very importantly, better ways to extract information from the experimental data. This report contains summaries of presentations and discussions that were held in sessions entitled ‘Basics and Present Limits of ARXPS’, the Analysis of ARXPS Data, Applications of ARXPS, Equipment for ARXPS, and Future Developments in ARXPS'. There were 33 participants at the workshop. Copyright © 2009 John Wiley & Sons, Ltd.     

New Insights into Sulfur Deposition on Gold Using Dithiobisphthalimide as a New Precursor

Dithiobisphthalimide is used as a new precursor for the spontaneous deposition of sulfur on gold surfaces in acetonitrile. Characterization of the modified surfaces is achieved using X‐ray photoelectron spectroscopy (XPS), electrochemistry and scanning tunneling microscopy (STM). The reported results indicate that the sulfur deposition is an efficient and fast process and that high coverages can be reached very quickly. Sequential high‐resolution STM in air allows the direct observation, for the first time, of the mobility of the usually observed rectangular structures as individual units. It also shows the reversible association/dissociation of these rectangles. The nature of these structures is highly debated in the literature and the present work provides new insights into their nature through the use of a new sulfur precursor under non‐traditional conditions. To explain our results we consider these structures as simple sulfur adlayers on the gold surface.     

New insights from X-ray photoelectron spectroscopy into the chemistry of covalent enzyme immobilization, with glutamate dehydrogenase (GDH) on silicon dioxide as an example

A three-step process for immobilization of glutamate dehydrogenase (GDH) on the surface of silicon dioxide has been studied by X-ray photoelectron spectroscopy (XPS). The enzyme layer was deposited on the silicon dioxide surface after first exposing the surface to 3-aminopropyltriethoxysilane (3-APTS) and reacting the silylated surface with glutaraldehyde (GA). Fine XPS analysis, performed after each step of the chemical procedure, revealed unknown details of the step-by-step construction of the enzyme layer under different experimental conditions.     

On the choice of the residual norm function in the interpretation of ARXPS data by regularized fitting

Angle‐resolved X‐ray photoelectron spectroscopy (ARXPS) data taken on a polystyrene film exposed to a nitrogen plasma are interpreted by the fitting of regularized depth profiles. Three ways of measuring the goodness of fit are compared—the χ² statistic with variances drawn from the raw spectra, the χ² statistic with variances drawn from the concentration figures obtained from the data analysis, and a simple sum of the squared differences (ssd) that does not require variances to be calculated. It is shown that for these data, the depth profiles obtained using an objective method for the choice of the regularization parameter are essentially identical irrespective of whether or how the variances are introduced into the calculation. Copyright © 2010 John Wiley & Sons, Ltd.     

Characterization of covalent immobilization on the surface of optical fibers by scanning electron microscopy and energy dispersive X‐ray spectrometry

Chemical modifications on the surface of optical fibers have played an important role in the immobilization of biological recognition molecules. In this article, the specific goal was to characterize the covalent bond on the surface of optical fiber by scanning electron microscopy and energy dispersive X‐ray spectrometry (EDS) and chemical analysis after silanization. Optical fibers pretreated with hydrofluoric acid and piranha solution were silanized in the 3‐aminopropyltriethoxysilane solution, then microscopic components of silanized optical fibers were determined to validate the silanization. Results showed that carbon atom was measured with EDS, and the ratio of silicon and oxygen atom was 1:3.6 on its surface by calculation. Fluorescence experiments on the short silanized optical fiber segments indicated that the intensity of fluorescence was relatively weak and reached equilibrium after 3 h. Both methods, EDS and fluorescence test, were effective to characterize the covalent bond of different silanes and biological recognition molecules on the optical fibers for biosensor applications. Copyright © 2009 John Wiley & Sons, Ltd.     

X‐ray photoelectron spectroscopy and the pattern recognition method—their application to surface studies in CoPd alloys

In the present work, polycrystalline CoPd alloys in varying range of bulk atomic percent composition (Co30Pd70, Co50Pd50 and Co70Pd30) are investigated by means of X‐ray photoelectron spectroscopy (XPS). The results of conventional XPS quantitative multiline (ML) approach are compared to the results obtained on the basis of XPS lines shape analysis, where the selected XPS or X‐ray induced Auger electron (XAES) transitions, are processed using the pattern recognition method known as the fuzzy k‐nearest neighbour (fkNN) rule. The fkNN rule is applied to the following spectra line shapes: Pd MNV, Co 2p, Co LMM, Pd 3d and valence band, analysing electrons in a varying range of selected kinetic energies. Both methods showed the surface segregation of Pd in Co30Pd70 and Co50Pd50 alloys. The results of the ML, the binding energy shift (ΔBE) analysis and the fkNN rule remained in agreement. Discrepancies in quantitative results obtained using different approaches are discussed within the accuracy of the applied methods, differences due to mean escape depth (MED) of electrons in considered transitions, their depth distribution function, the sensitivity of electron transition line shape on the environmental change (weaker effect for the inner shell transitions, and stronger effect for the outer shell transitions and Auger electron spectroscopy (AES) electrons transitions) and the non‐uniform depth profile concentrations. Copyright © 2005 John Wiley & Sons, Ltd.