Comparison of the catalytic activity of Ziegler-type catalysts based on Cp2ZrCl2 and (Cp2ZrCl)2O

The rates of ethylene polymerization catalyzed by Cp₂ZrCl₂-polymethylalumoxane and (Cp₂ZrCl)₂O-polymethylalumoxane are equal. According to NMR and ESR spectral data, the same precatalyst, presumably Cp₂ZrMe₂, is formed in both systems by the action of AlMe₃. This accounts for the equal catalytic activity of the systems based on Cp₂ZrCl₂ and (Cp₂ZrCl)₂O. A scheme of reactions resulting in cleavage of the Zr-O-Zr bridge is proposed and confirmed by spectroscopic data.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2104–2107, December, 1993.     

Relative reactivity enhancement of (Me5Cp)2ZrCl2 in mixture with (1,2,4-Me3Cp)2ZrCl2 during ethene/1-hexene copolymerization

Dual-site ethene/1-hexene copolymerizations with MAO-activated (1,2,4-Me₃Cp)₂ZrCl₂ and (Me₅Cp)₂ZrCl₂ catalysts were performed. Copolymers with narrow molecular weight distributions and bimodal short chain branching distributions could be produced. The combined catalyst system demonstrates a number of discrepancies from an expected average behavior of the individual sites. Dual-site (1,2,4-Me₃Cp)₂ZrCl₂/(Me₅Cp)₂ZrCl₂ systems produce copolymers with lower incorporation than expected. Clear evidences for relative activity enhancement of the (Me₅Cp)₂ZrCl₂ catalyst in the mixture were observed in melting endotherms and Crystaf profiles. Molecular weights obtained by the mixture were higher than for any of the individual catalysts. A similar effect is observed for a dual-site system of the (1,2,4-Me₃Cp)₂ZrCl₂ catalyst together with the Me₄Si₂(Me₄Cp)₂ZrCl₂ catalyst as an alternative to (Me₅Cp)₂ZrCl₂.     

Carbon Nanotubes as a Ligand in Cp2ZrCl2‐Based Ethylene Polymerization

Summary: We report a simple method for tuning catalytic property of a metallocene‐based catalyst, Cp₂ZrCl₂, for ethylene polymerization by the direct adsorption of Cp₂ZrCl₂ onto multi‐walled carbon nanotubes (MWCNTs). The direct interactions between MWCNTs and the Cp rings of Cp₂ZrCl₂ controlled the polymerization behaviors, and we could generate polyethylene with an extremely high molecular weight ( = 1 000 000) at 30 °C and under 1 atm of ethylene gas.

Preparation of Cp₂ZrCl₂‐MWCNT.     

Ethylene/1-hexene copolymerizations by syndioselective metallocenes: Direct comparison of Me2C(Cp)(Flu)ZrMe2 with Et(Cp)(Flu)ZrMe2

Copolymerizations of ethylene with 1-hexene have been carried out by using two metallocenes: highly syndiospecific isopropylidene(1-η⁵-cyclopentadienyl)(1-η⁵-fluorenyl)-dimethylzirconium (Me₂C(Flu)(Cp)ZrMe₂, 1) and less syndiospecific (1-fluorenyl-2-cyclopentadienylethane)-dimethylzirconium (Et(Flu)(Cp)ZrMe₂, 2), in the presence of [Ph₃C][B(C₆F₅)₄] as a cocatalyst. The effect of different types of bridges on the catalytic activity and comonomer reactivity was reported. The ethano bridged 2 compound of a smaller dihedral angle showed much higher activity than the 1 compound in the ethylene homo- and copolymerizations. The catalytic activities of the two compounds were enhanced about twice when a suitable amount of 1-hexene comonomer is present in the feed. The copolymerization of ethylene with 1-hexene revealed a noticeable influence of the type of bridge on the relative reactivity of the 1-hexene. ¹³C-NMR analysis of copolymers showed that compound 1 is characterized by lower r_E, taken as an index of ethylene reactivity, and higher reactivity of 1-hexene. The bridge also affects the distribution of the 1-hexene along the copolymer chain, investigated through their product of reactivity ratios, r_Er_H. The thermal properties and the density of copolymers were not affected by the type of bridge of the metallocenes, but mainly depended on 1-hexene content in the copolymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2763–2772, 1999     

Density functional theory study of the interaction of CP2*ZrCH 3+ (Cp* = C5H5, C5Me5, and C13H9) with ethylene molecule

Density functional theory was used to study gas-phase reactions between the Cp₂*ZrMe⁺ cations, where Cp* = C₅H₅ (1), Me₅Cp = C₅Me₅ (2), and Flu = C₁₃H₉ (3), and the ethylene molecule, Cp₂*ZrMe⁺ + C₂H₄ → Cp₂*ZrPr⁺ → Cp₂*ZrAllyl⁺ + H₂. The reactivity of the Cp₂*ZrMe⁺ cations with respect to the ethylene molecule decreased in the series 1 > 3 ≈ 2. Substitution in the Cp ring decreased the reactivity of the Cp₂*ZrMe⁺ cations toward ethylene, in agreement with the experimental data on the comparative reactivities of complexes 1 and 3. The two main energy barriers along the reaction path (the formation of the C-C bond leading to the primary product Cp₂*ZrPr⁺ and hydride shift leading to the secondary product Cp₂*Zr(H₂)Allyl⁺) vary in opposite directions in the series of the compounds studied. For Flu (3), these barriers are close to each other, and for the other compounds, the formation of the C-C bond requires the overcoming of a higher energy barrier. A comparison of the results obtained with the data on the activity of zirconocene catalysts in real catalytic systems for the polymerization of ethylene led us to conclude that the properties of the catalytic center changed drastically in the passage from the model reaction in the gas phase to real catalytic systems.     

Metallocene/mao polymerization catalysts supported on cyclodextrin

By treating cyclodextrin(CD) with methylaluminoxane (MAO such as PMAO or MMAO) or trimethylaluminium (TMA) followed by Cp₂ZrCl₂, CD/PMAO/Cp₂ZrCl₂, CD/MMAO/Cp₂ZrCl₂ and CD/TMA/Cp₂ZrCl₂ catalysts were prepared. The catalysts were analyzed by ¹³C-CP/MAS NMR spectrometer and ICP to examine the structure of catalyst and content of Zr and Al. Ethylene polymerization was conducted with MAO or TMA as cocatalyst. Styrene polymerization was also carried out with α-CD/MMAO/Cp*TiCl₃ and α-CD/TMA/Cp*TiCl₃ catalysts. While the ordinary trialkylaluminium such as TMA as well as MAO can be used as cocatalyst for ethylene polymerization, only MAO could initiate the styrene polymerization with α-CD supported catalysts.     

Reaktion von cyclopentadienyl-substituierten Molybdän(V)-tetrachloriden mit LiPH(2,4,6-BuC6H2) und KPPh2(Dioxan)2. Molekülstrukturen von [Cp0Mo(μ-Cl)2]2 und [CpMo2(μ-Cl)3(μ-PPh2)] (Cp0 = C5Me4Et)

Reaction of Cyclopentadienyl Substituted Molybdenum(V) Tetrachlorides with LiPH(2,4,6-Bu C₆H₂) and KPPh₂(Dioxane)₂. Crystal Structures of [Cp⁰Mo(μ? Cl)₂]₂ and [Cp Mo₂(μ? Cl)₃(μ? PPh₂)] (Cp⁰ = C₅Me₄Et) The reaction of [Cp⁰Mo(CO)₃]₂ (Cp⁰ = C₅Me₄Et) and [Cp′Mo(CO)₃]₂ (Cp′ = C₅H₄Me) with PCl₅ in CH₃CN furnishes the Mo(V) complexes Cp⁰MoCl₄(CH₃CN) 1 and Cp′MoCl₄(CH₃CN) 2 in good yields. While 1 and 2 are reduced by LiPH(2,4,6-BuC₆H₂) to the Mo(III) complexes [Cp⁰Mo(μ? Cl)₂]₂ 3 and [Cp′Mo(μ? Cl)₂]₂ 4 , the reaction of 1 with KPPh₂(dioxane)₂ yields the reduction/substitution product [CpMo₂(μ? Cl)₃(μ? PPh)] 5 in low yield. 1 – 4 were characterized spectroscopically (i.r., mass, 3 and 4 also n.m.r.). An X-ray crystal structure determination was carried out on 3 and 5. 3 crystallizes in the triclinic space group P1 (No. 2) with a = 8.278(4), b = 12.508(7), c = 12.826(7) Å, α = 86.78(5), β = 81.55(2), γ = 75.65(4)°, V = 1 272.4 ų and two formula units in the unit cell (data collection at ? 67°C, 4 255 independent observed reflections, R = 2.9%); 5 crystallizes in the triclinic space group P1 (No. 2) with a = 11.536(8), b = 12.307(9), c = 13.157(9) Å, α = 91.41(6), β = 100.42(5), γ = 112.26(6)°, V = 1 688.7 ų and two formula units in the unit cell (data collection at ? 60°C, 6 147 independent observed reflections, R = 4.9%). The crystal structure of 3 shows the presence of centrosymmetric dimeric molecules with four bridging chloro ligands. In 5, two Mo atoms are bridged by three chloro ligands and one PPh₂ ligand. The Mo? Mo bond length in 3 and 5 (2.600(2), 2.596(2) Å and 2.6388(8) Å) is in agreement with a Mo? Mo bond.     

Heterometall-Komplexe mit E6-Liganden (E = P,As)

Heterometallic Complexes with E₆ Ligands (E = P, As) The reaction of [Cp*Co(μ-CO)]₂ 1 with the sandwich complexes [Cp*Fe(η⁵-E₅)] 2 a: E = P, 2 b: E = As in decalin at 190°C affords besides [CpCo₂E₄] 4: E = P, 7: E = As and [CpFe₂P₄] 5 the trinuclear complexes [(Cp*Fe)₂(Cp*Co)(μ-η²-P₂)(μ₃-η^1:2:1-P₂)₂] 3 as well as [(Cp*Fe)₂(Cp*Co)(μ₃-η^2:2:2-As₃)₂] 6 . With [Mo(CO)₅(thf)] 3 and 6 form in a build-up reaction the tetranuclear clusters [(Cp*Fe)₂(Cp*Co)E₆{Mo(CO)₃}] 10: E = P, 11: E = As. 3, 6 and 11 have been further characterized by an X-ray crystal structure determination.     

Ionization of Cp2ZrMe2 and Lewis Bases by Methylaluminoxane: Computational Insights

The interactions of the Lewis bases CO, octamethyltrisiloxane (OMTS) and 2,2’-bipyridine (bipy) with a sheet model for the principal activator (MeAlO)₁₆(Me₃Al)₆ (16,6) in hydrolytic methylaluminoxane (MAO) were investigated by DFT. These studies reveal that OMTS and bipy form adducts with Me₃Al prior to methide abstraction by 16,6 to form the ion-pairs [Me₂Al(κ²-L)][ 16,6 ] ( 5 : L=OMTS, 6 : L=bipy, [ 16,6 ]⁻=[(MeAlO)₁₆(Me₃Al)₆ Me]⁻) while CO simply binds to a reactive edge site without ionization. The binding and activation of Cp₂ZrMe₂ with 16,6 to form both neutral adducts 1 Cp₂ZrMe₂ ⋅ 16,6 and contact ion-pairs 4 and 7 , both with formula [Cp₂ZrMe][μ-Me(MeAlO)₁₆(Me₃Al)₆], featuring terminal and chelated MAO-anions, respectively was studied by DFT. The displacement of the anion with either excess Cp₂ZrMe₂ or Me₃Al was also studied, forming outer-sphere ion-pairs [(Cp₂ZrMe)₂μ-Me][ 16,6 ] ( 2 ) and [Cp₂Zr(μ-Me)₂AlMe₂][ 16,6 ] ( 3 ). The theoretical NMR spectra of these species were compared to experimental spectra of MAO and Cp₂ZrMe₂ and found to be in good agreement with the reported data and assignments. These studies confirm that 16,6 is a very suitable model for the activators present in MAO but highlight the difficulty in accurately calculating thermodynamic quantities for molecules in this size regime.     

Mechanistic aspects of the olefin polymerization with metallocene catalysts

With C₁-, C₂- or C_s-symmetric metallocenes, different intermediates and types of copolymers can be obtained from randomly distributed to alternating structures. Substitution of the Cp-ring in [Me₂C-(tert-Bu Cp)(Flu)]ZrCl₂ yields ethene/norbornene copolymers with an alternating structure, because the rigid norbornene can only be inserted from the open side of the metallocene. By variation of the polymerization parameters, copolymers with glass transition temperatures above 180°C and molecular weights > 100 000 are synthesized. By supporting different metallocenes on a silica/methylaluminoxane (MAO) carrier the deactivation reaction under electron and hydrogen transfer can be suppressed. This is proved for different Al/Zr ratios when trimethylaluminum (TMA) is used as cocatalyst by the lack of methane evolution by metallocenes and by near independence of the polymerization activity on the prereaction time, after reaching maximum activity. Aluminumalkyls and MAO leach Cp₂ZrCl₂ from the carrier, the leached metallocene is only active in polymerization by adding MAO.     

Synthesis of zirconocene-acetylene and zirconocene-diacetylene polymer

A new class of organometallic polymer having a backbone of conjugated Poly-yne and Zr-metal atoms has been prepared. Trichloroethylene (TCE) and Hexachlorobutadiene (HCB) are quantitatively converted by n-butyllithium to dilithioacetylene (LiCCLi) and dilithiodiacetylene (Li CC CC Li) respectively. Quenching with Cp₂*ZrCl₂ affords high yields of the polymers Zr(Cp₂*)CC_n and Zr(Cp₂*)CC CC_n where Cp* = C₅(CH₃)₅ = pentamethyl cyclopentadienyl. The Cp₂*ZrCl₂ and the polymers were characterized by viscosity, molecular weight, elemental analysis, FTIR, NMR spectra, and TGA. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3899–3902, 1999     

Shape and diffusion of the monomer‐controlled copolymerization of ethylene and α‐olefins over Cp2ZrCl2 confined in the nanospace of the supercage of NaY

Cp₂ZrCl₂ confined inside the supercage of NaY zeolites [NaY/methylaluminoxane (MAO)/Cp₂ZrCl₂] exhibited the shape and diffusion of a monomer‐controlled copolymerization mechanism that strongly depended on the molecular structure of the monomer and its size. For the ethylene–propylene copolymerization, NaY/MAO/Cp₂ZrCl₂ showed the effect of the comonomer on the increase in the polymerization rate in the presence of propylene, whereas the ethylene/1‐hexene copolymerization showed little comonomer effect, and the ethylene/1‐octene copolymerization instead showed a comonomer depression effect on the polymerization rate. Isobutylene, having a larger kinetic diameter, had little influence on the copolymerization behaviors with NaY/MAO/Cp₂ZrCl₂ for the ethylene–isobutylene copolymerization, which showed evidence of the shape and diffusion of a monomer‐controlled mechanism. The content of the comonomer in the copolymer chain prepared with NaY/MAO/Cp₂ZrCl₂ decreased by about one‐half in comparison with that of Cp₂ZrCl₂. A differential scanning calorimetry study on the melting endotherms after the successive annealing of the copolymers showed that the copolymers of NaY/MAO/Cp₂ZrCl₂ had narrow comonomer distributions, whereas those of homogeneous Cp₂ZrCl₂ were broad. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2171–2179, 2003     

Synthesis and characterization of ethylene‐propylene‐1‐pentene terpolymers

Ethylene (E), propylene (P), and 1‐pentene (A) terpolymers differing in monomer composition ratio were produced, using the metallocenes rac‐ethylene bis(indenyl) zirconium dichloride/methylaluminoxane (rac‐Et(Ind)₂ZrCl₂/MAO), isopropyl bis(cyclopentadienyl)fluorenyl zirconium dichloride/methylaluminoxane (Me₂C(Cp)(Flu)ZrCl₂/MAO, and bis(cyclopentadienyl)zirconium dichloride, supported on silica impregnated with MAO (Cp₂ZrCl₂/MAO/SiO₂/MAO) as catalytic systems. The catalytic activities at 25 °C and normal pressure were compared. The best result was obtained with the first catalyst. A detailed study of ¹³C NMR chemical shifts, triad sequences distributions, monomer‐average sequence lengths, and reactivity ratios for the terpolymers is presented. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 947–957, 2008     

Cyclopolymerization of 1,5‐hexadiene catalyzed by various stereospecific metallocene compounds

Cyclopolymerization of 1,5‐hexadiene has been carried out at various temperatures in toluene by using three different stereospecific metallocene catalysts—isospecific rac‐(EBI)Zr(NMe₂)₂ [EBI: ethylenebis(1‐indenyl), Cat 1], syndiospecific Me₂C(Cp)(Flu)ZrMe₂ (Cp = 1‐cyclopentadienyl, Flu = 1‐fluorenyl, Cat 2), and aspecific CpZrMe₂ (Cp*: pentamethylcyclopentadienyl, Cat 3) compounds in the presence of Al(i‐Bu)₃ and [Ph₃C][B(C₆F₅)₄]—in order to study the effect of polymerization temperature and catalyst stereospecificity on the property and microstructure of poly(methylene‐1,3‐cyclopentane) (PMCP). The activities of catalysts decrease in the following order: Cat 1 > Cat 2 > Cat 3. PMCPs produced by Cat 1 are not completely soluble in toluene, but those by Cat 2 and Cat 3 are soluble in toluene. trans‐Diisotactic rich PMCPs are produced by Cat 1 and Cat 2, and cis‐atactic PMCP by Cat 3. The cis/trans ratio of PMCP by Cat 1 and Cat 2 is relatively insensitive to the polymerization temperature, but that by Cat 3 is highly sensitive to the polymerization temperature. Melting temperatures of PMCP produced increase with the cis to trans ratio of rings. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1520–1527, 2000     

Zirconocene-Mediated Radical Hydrophosphination

Hydrophosphination activity has been solicited from the parent and decamethyl zirconocene dichloride compounds, Cp₂ZrCl₂ and Cp*₂ZrCl₂. Given recent reports of photocatalytic hydrophosphination, these compounds were irradiated in the near ultraviolet (UV) as precatalysts resulting in the successful hydrophosphination of styrene substrates and activated alkenes. Irradiation appears to induce homolysis of the Cp or Cp* ligand, resulting in radical hydrophosphination. Successful detection of this radical reactivity was achieved by monitoring for EPR signals with in situ irradiation, a methodology proving to be general for the determination of radical versus closed-shell reactivity in transition-metal photocatalysis.     

Highly active zirconium(IV) catalyst containing sterically hindered hydridotris(pyrazolyl)borate ligand for the polymerization of ethylene

The synthesis and characterization of the novel zirconium (IV) tris(pyrazolyl)borate compound {Tp^Ms*}ZrCl₃ ( 1 ) (Tp^Ms* = hydridobis(3‐mesitylpyrazol‐1‐yl)(5‐mesitylpyrazol‐1‐yl)), as well as its performance in polymerizing ethylene are described. The reaction of ZrCl₄ with 1 equivalent of TlTp^Ms* in toluene at room temperature affords 1 as a white solid in 62% yield. Compound 1 in the presence of MAO showed remarkable productivity using a low Al : Zr molar ratio (6.79×10⁴ kg of PE/(mol Zr·h·[C₂H₄]); toluene, 60°C, Al/Zr = 100). Under identical polymerization conditions, compound 1 and Cp₂ZrCl₂ showed comparable productivities. Compound 1 displayed similar productivities at temperatures in the range of 0–75°C and noticeable productivity at 105°C. The viscosity‐average molecular weight of the polyethylenes depends on the Al : Zr molar ratio and polymerization temperature and varied between 1.09 and 8.98×10⁵ g·mol^–1.     

Triboluminescence of zirconium η<Superscript>5</Superscript>-complexes

This work describes a comparative study of tribo- and photoluminescence of metallocenes (Cp₂HfCl₂, Cp₂TiCl₂, Cp₂ZrCl₂, (CpMe)₂ZrCl₂, rac-Me₂C(3-Bu^t-Cp)₂ZrCl₂, Ind*₂ZrCl₂). Occurring under mechanodestruction of polycrystals, triboluminescence of zirconium bis-cyclopentadienyl complexes, Cp₂ZrCl₂, (CpMe)₂ZrCl₂, and rac-Me₂C(3-Bu^t-Cp)₂ZrCl₂ has been revealed for the first time. The triboluminescence spectrum in air is similar to the photoluminescence spectrum of zirconocene polycrystals. The triboluminescence spectrum does not show *N₂ luminescence. Ne and Ar lines are observed in the triboluminescence spectrum in the atmosphere of these gases. An increase in the number of substituents in zirconocene ligands leads to a bathochromic shift of the emission band maximum in triboluminescence spectra of the complexes. Possible mechanisms of zirconocene triboluminescence excitation are discussed.     

Synthesis and characterization of ethylthioethylcyclopentadienyl organolanthanide complexes: CpLnCl (Ln=Gd,Dy), Cp2LnCpTh (Ln=Yb,Sm, Dy,Y) and CpThErCl2·2THF

Six new ethylthioethylcyclopentadienyl containing organolanthanide complexes CpLnCl [Ln=Gd (1), Dy (2)] and Cp₂LnCp^Th [Cp=C₅H₅, Ln=Yb (3), Sm (4), Dy (5), Y (6)] were synthesized by the reaction of ethylthioethyl‐cyclopentadienyl (Cp^Th) sodium salt with LnCl₃ or Cp₂LnCl in THF. Complexes 1–6 were characterized by elemental analyses, infrared and mass spectroscopies. The molecular structures of complexes 1–3 were also determined by the X‐ray single crystal diffraction. The results show that the side‐chain sulfur atom on the ethylthioethylcyclopentadienyl ring can form intramolecular chelating coordination to the central lanthanide ion, improving the stability of organolanthanide complexes and reducing the number of coordinated THF molecules.     

Sekundäre Hydroxyalkylphosphane: Synthese und Charakterisierung mono‐, bis‐ und trisalkoxyphosphan‐substituierter Zirconiumkomplexe und des heterobimetallischen Dreikernkomplexes [Cp2Zr{O(CH2)3PHMes(AuCl)}2]

Secondary Hydroxyalkylphosphanes: Synthesis and Characterization of Mono‐, Bis‐ and Trisalkoxyphosphane‐substituted Zirconium Complexes and the Heterobimetallic Trinuclear Complex [Cp₂Zr{O(CH₂)₃PHMes(AuCl)}₂] The secondary hydroxyalkylphosphanes RPHCH₂OH [R = 2,4,6‐Me₃C₆H₂ (Mes) ( 1 ), 2,4,6‐ⁱPr₃C₆H₂ (Tipp) ( 2 )], 1‐AdPH‐2‐OH‐cyclo‐C₆H₁₀ ( 3 ) and RPH(CH₂)₃OH [R = Ph ( 4 ), Mes ( 5 ), Tipp ( 6 ), Cy ( 7 ), ^tBu ( 8 )] were obtained from primary phosphanes RPH₂ and formaldehyde ( 1 , 2 ) or from LiPHR and cyclohexene oxide ( 3 ) or trimethylene oxide ( 4 ‐ 8 ). Starting from 5 or 7 and [Cp^R₂ZrMe₂] [Cp^R = C₅EtMe₄ (Cp°), C₅H₅ (Cp), C₅MeH₄ (Cp′)], the monoalkoxyphosphane‐substituted zirconocene complexes [Cp^R₂Zr(Me){O(CH₂)₃PHMes}] [Cp^R = Cp° ( 9 ), Cp ( 10 )] were prepared. With [Cp^R₂ZrCl₂], the bisalkoxyphosphane‐substituted complexes [Cp′₂Zr{O(CH₂)₃PHMes}₂] ( 11 ) and [Cp₂Zr{O(CH₂)₃PHCy}₂] ( 12 ) are obtained, and with [Tp^RZrCl₃], the trisalkoxyphosphane‐substituted zirconium complexes [Tp^RZr{O(CH₂)₃PHMes}₃] [Tp^R = trispyrazolylborato (Tp) ( 13 ), Tp^R = tris(3,5‐dimethyl)pyrazolylborato (Tp*) ( 14 )] are prepared. The reaction of 5 with [AuCl(tht)] (tht = tetrahydrothiophene) yielded the mononuclear complex [AuCl{PHMes(CH₂)₃OH}] ( 15 ). The trinuclear complex [Cp₂Zr{O(CH₂)₃PHMes(AuCl)}₂] ( 16 ) was obtained from [Cp₂ZrCl₂] and 15 . Compounds 1 ‐ 16 were characterized spectroscopically (¹H‐, ³¹P‐, ¹³C‐NMR; IR; MS) and compound 2 also by crystal structure determination. The bis‐ and trisalkoxyphosphane‐substituted complexes 11‐14 and 16 were obtained as mixtures of two diastereomers which could not be separated.     

Cp2ZrCl2-catalyzed hydroalumination of norbornene derivatives withi-Bu2AlCl

Cp₂ZrCl₂-catalyzed (Cp = ⁵-C₅H₅) hydroalumination of substituted norbornenes withi-Bu₂AlCl was conducted, yielding higher cycloalkylhaloalanes with high yields.Institute of Organic Chemistry, Ural Branch, Russian Academy of Sciences, 450054 Ufa. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2791–2798, December, 1992.