生血宁片中Fe元素的形态分析方法研究

为对生血宁片中Fe元素的形态进行分析,采用了溶剂法、树脂法制备相应供试品溶液,通过微波消解与ICP-MS法测定了生血宁片中Fe元素的含量,并进行了形态研究。结果表明,生血宁片中Fe元素主要以稳定态形式存在,既以有机态又以无机态形式存在,且主要以Fe2+的稳定结合态的形式存在。通过离子树脂筛选出不同价态的铁元素,为价态的分离提供一新方法,且进一步证明了Fe元素的起效形式,同时为中药材或中成药的质量控制及药理研究提供理论参考。     

基于三联吡啶衍生物的Fe2+/Fe3+化学比色敏感器

合成和表征了一种新的化合物(E)-4-′(4-(2-(2-萘)乙烯基)苯基)-2,2′:6′,2″-三联吡啶L.用Fe2+或Fe3+来滴定时,L的溶液(三氯甲烷和乙醇的体积比为1∶20)颜色分别从无色变成洋红色和橙红色,相应的紫外可见吸收光谱都在374和574 nm出现特征吸收峰.此外,即使存在其它过量金属阳离子时,L对Fe2+或Fe3+离子仍然表现出很强的敏感性和选择性.另外,还研究了L对Fe2+或Fe3+离子及两者共同存在时的线性检测浓度范围和最低检测极限(LOD).     

胡椒碱与牛血清白蛋白的作用及Cu2+、Fe3+影响的研究

采用荧光光谱及紫外光谱法研究了胡椒碱与牛血清白蛋白（bovine serum albumin,BSA）的相互作用。实验结果表明：胡椒碱与BSA形成基态复合物从而猝灭BSA的内源性荧光,猝灭原因主要为静态猝灭和非辐射能量转移作用。胡椒碱对BSA的猝灭速率常数Kq为7．31×10^12 L·mol^-1·s^-1（25℃）和7．20×10^12 L·mol^-1·s^-1（37℃）,胡椒碱与BSA的结合常数K为1．02×10^7 L·mol^-1（25℃）和1．11×10^7 L·mol^-1（37℃）,结合位点数n为1．45（25℃）和1．46（37℃）。根据Ftirster偶极-偶极非辐射能量转移理论问题得到结合距离r为3．28nm（25℃）和3．30nm（37℃）。通过热力学参数的计算,确定胡椒碱与牛血清白蛋白的相互作用是一个熵增加和吉布斯自由能降低的自发过程,主要作用力为疏水作用力。同步荧光光谱表明,胡椒碱与BSA的相互作用没有引起BSA构象的变化。讨论了共存金属离子Cu^2＋、Fe^3＋对胡椒碱与BSA相互作用的影响。     

基于蒽酰亚胺基团的新型Fe3+和Hg2+化学敏感器

含蒽酰亚胺基团的化合物N-(2-(6-氨基吡啶))-9-蒽酰亚胺(L¹)对Fe³⁺表现出灵敏的荧光增强响应.L¹的衍生物N,N-’(2,6-吡啶基)-二(9-蒽酰亚胺)(L²)对Hg²⁺在紫外-可见吸收光谱和荧光光谱上显示了良好的识别性.即使在其它金属阳离子存在下,L¹和L²分别对于Fe³⁺和Hg²⁺仍然表现出较好的选择性.     

基于香豆素与胍的荧光探针的合成及对Co2+、Fe3+的识别研究(英文)

本论文设计合成了基于1,3-二氨基胍盐酸盐、氨基胍盐酸盐的新型香豆素类荧光探针L1、L2。通过紫外-可见、荧光光谱的变化研究探针L1、L2对金属离子的识别效应。利用Job’s plot曲线确定探针L1与Co²⁺形成了1∶2的配合物,探针L2和Fe³⁺形成了3∶1的配合物,且表现为明显的荧光增强。探针L1对Co²⁺的检出限可达到10^-6mol/L,探针L2对Fe³⁺的检出限可达到10^-7mol/L。两种高灵敏度荧光探针有望应用于生物和环境监测领域。     

均三嗪衍生物应用于Fe3+和Cu2+的选择性识别研究

合成了2,4-二甲基-6-(4’-N,N-二甲氨基苯乙烯基)-1,3,5-均三嗪(1)和2-苯乙烯基-4,6-二甲基-1,3,5-均三嗪(2)两种化合物,并对其进行了1H NMR,MS,元素分析等表征.采用吸收光谱法研究了金属离子与化合物间的相互作用,结果显示:化合物1对Fe3+和Cu2+表现出高选择性光谱响应,其最大吸收波长由393 nm分别红移至525 nm和513 nm,溶液颜色由黄色变为粉红色.化合物1与Fe3+结合形成1∶1型配合物,其结合常数为1.8×104L mol-1;与Cu2+结合形成2∶1型配合物,其结合常数为2.6×1010L mol-1.化合物2仅对Fe3+呈现显著的光谱变化,其最大吸收波长由304nm红移至357 nm,而Cu2+的加入未引起光谱明显变化,2与Fe3+亦形成1∶1型配合物,结合常数为1.0×105L mol-1.结果表明Fe3+可能与化合物1和2中三嗪N配位,而Cu2+与化合物1中甲氨基中的N配位.同时考察了其它金属离子如Li+,K+,Mg2+,Ca2+,Co3+,Ni2+,Ag+,Cd2+,Hg2+和Zn2+等离子对化合物1和2吸收光谱的影响,结果显示两者光谱均无明显变化,据此提出了高选择性Fe3+,Cu2+的识别体系.     

新型水溶性罗丹明类荧光探针的合成及其对游离3价金属离子的识别

以罗丹明B为原料,设计合成一种新型水溶性荧光探针(L),并对其进行表征和光学性能研究.结果表明,探针L能在纯水体系(TRIS,pH=7.4)中快速识别游离M3+(Cr3+、Al3+、Fe3+)金属离子,为荧光增强型探针,具有灵敏度高、抗干扰能力强的特点.探针L对Cr3+、Al3+、Fe3+的荧光检测限分别为1.57×1...     

Determination of Fe2+ and Fe3+ in Aqueous Solutions Containing Food Chelators by Differential Pulse Anodic Stripping Voltammetry

The objective was to investigate interactions between iron and food chelators in an aqueous environment. The net complexation were investigated by DPASV in a NaClO₄ electrolyte using a platinum electrode. The experimental conditions were simulating the environment of the human duodenum. The results indicated a net coordination affinity between Fe²⁺ and the organic acids in the following order; ascorbic acid≈phytate>pyruvate>lactate>acetate. For Fe³⁺ net complexation, the stability was in the order of lactate>phytate>pyruvate>acetate>citrate. In conclusion, DPASV in conjunction with a platinum electrode is suitable for studies in aqueous systems where the net complexation of metal is important.     

Novel Fluorescent Chemosensors Based on Tryptophan Unit for Cu2+ and Fe3+ in Aqueous Solution

We reported four fluorescent chemosensors containing tryptophan units. The fluorescence spectrum titration experiments suggest that chemosensors 1, 2, 3 and 4 are highly selective for Cu²⁺ and Fe³⁺ over Li⁺, Na⁺, K⁺, Co²⁺, Zn²⁺, Ni²⁺, Hg²⁺ and Cr³⁺ via forming complexes with Cu²⁺ or Fe³⁺, which is confirmed by dramatical quench of fluoreseence in aqueous solution at pH 7.4, thus making all the chemosensors suitable for Cu²⁺ and Fe³⁺ fluorescent sensors.     

体会配合物使用价值的微项目教学课例*——补铁药片中铁元素化合价的检验

配合物、配位键是高中化学选择性必修课程“物质结构与性质”模块的重要知识。本节课采用“项目式教学”的方式,巩固配位键和配合物形成的结构基础,学生们在检验补铁药片中铁元素化合价的系列化学实验过程中,初步建立配位平衡及其影响因素的概念,体会配合物的使用价值,从而提升学生对配位键和配合物的认识。     

Synthesis and properties of iron oxide coated carbon nanotubes hybrid materials and their use in epoxy coatings

Multi‐walled carbon nanotubes (MWCNTs) were acidified with nitration mixture, and the Fe₂O₃‐MWCNTs (iron oxide coated multi‐walled carbon nanotubes) hybrid material via sol‐gel method then verified the results through scanning electron microscope, X‐ray diffraction, and thermal gravimetric analysis. We modified the hybrid material with silane coupling agent (KH560), Fe₂O₃‐MWCNTs/epoxy, MWCNTs/epoxy composites coating, and the pure epoxy coatings were respectively prepared. The properties of the composite coatings were tested through the electrochemical workstation (electrochemical impedance spectroscopy), shock experiments, and thermal gravimetric analysis. Finally, we used scanning electron microscope to observe the surface conditions of the coatings. The results show that Fe₂O₃‐MWCNTs have good dispersion in the epoxy resin, and the Fe₂O₃‐MWCNTs/epoxy composite coatings have enhanced mechanical properties and corrosion resistance. Copyright © 2015 John Wiley & Sons, Ltd.     

基于CaBa_2(BO_3)_2中的Ce~(3+)→Tb~(3+)能量传递及光谱特性

采用高温固相法合成了Ce3+,Tb3+掺杂激活的CaBa2(BO3)2荧光粉,并对其发光特性进行了研究。观察到CaBa2(BO3)2中Ce3+对Tb3+发光的敏化现象。在367 nm紫外光激发下,单掺Tb3+时CaBa2(BO3)2不发光。当Ce3+和Tb3+共掺时,出现Tb3+的发射峰,样品发绿光,表明Ce3+对Tb3+的发光有很强的敏化作用。根据Forster-Dexter理论,分析Ce3+和Tb3+的能量传递过程,还证明在CaBa2(BO3)2:Ce3+,Tb3+中Ce3+对Tb3+的能量传递属于共振能量传递。     

EIS analysis on the anodic dissolution kinetics of pure iron in a highly alkaline solution

The anodic dissolution kinetics of pure iron in a highly alkaline solution was systematically studied by EIS. A model based on its reaction mechanism was proposed, which can well explain the characteristics of EIS. From the model, it was found that the Fe(III) oxide covered on the iron surface was firstly electrochemically oxidized to an adsorbed Fe(V) intermediate, the latter then converted to the final Fe(VI) product and the initial Fe(III) reactant through a disproportionating reaction. The kinetic constants of each step as well as the covering densities of the Fe(III) reactant and the Fe(V) intermediate at different potentials were calculated from the EIS model.     

Fe/Fe_2和NO反应的密度泛函理论研究

利用密度泛函理论(Density Functional Theory)中的B3LYP方法在6-311+G(d,p)的计算水平上研究了Fe/Fe_2与NO反应的相关微观机理.全参数优化了Fe+NO和Fe_2+NO反应体系在不同重态反应势能面上各驻点的几何结构,并用频率分析法以及内禀反应坐标(Intrinsic Reaction Coordinate)方法对过渡态进行了验证,得到了相对应的反应的微观反应路径.用两态反应分析反应机理,计算结果表明2个体系的优先选择路径均为低自旋态进入和高自旋态离开反应.通过对2个体系反应活化能的比较,Fe_2+NO体系更易进行.     

板栗内皮对水溶液中镉离子和铅离子的吸附

研究了板栗内皮对水溶液中金属离子(Cd2+,Pb2+)的吸附过程,以及吸附过程中不同条件对其吸附能力的影响.通过对反应时间、温度、pH、初始金属离子浓度等因素的控制,设计不同单一变量确定在不同条件下的吸附能力,利用红外光谱确定板栗内皮上参与反应的主要基团.结果表明,板栗内皮吸附Cd2+,Pb2+理论最佳吸附条件分别为p...     

CaAl12O19基质中Eu2+-Cr3+的能量传递与发光性质

在还原气氛下高温固相法合成了CaAl12O19:Eu2+,Cr3+荧光粉.样品光谱显示:Eu2+发射带与Cr3+吸收带有重叠,具备Eu2+-Cr3+之间发生能量传递必要条件.在290 nm近紫外光激发下,单掺杂Eu2+和Cr3+时样品均无691 nm发射,仅在Eu2+,Cr3+共掺时才出现691 nm发射,这证明Eu2+和Cr3+之间发生了能量传递,且监测691 nm时样品的激发光谱也证实了这一点.CaAl12O19:1%Eu2+,x%Cr3+样品组的发射光谱研究表明:增大x能提高Cr3+红光与Eu2+蓝紫光发射强度之比及Eu2+-Cr3+之间能量传递效率.CaAl12O19:2%Cr3+,x%Eu2+样品组的激发光谱分析表明:x>2时,Cr3+在415 nm处的吸收效率相对于565 nm有显著提高.还对样品CaAl12O19:1%Eu2+,1%Cr3+荧光寿命和能量传递速率进行了简单分析.     

Fe3O4@Gd2O3:Eu3+磁光双功能复合粒子的制备与表征

采用水热法合成了Fe3O4@Gd2O3:Eu3+核壳结构磁光双功能复合粒子,对其结构和性能进行了表征.XRD分析表明:700℃煅烧后Fe3O4表面包覆上了结晶良好的立方晶系的Gd2O3:Eu3+.TEM照片表明:所得的复合粒子具有明显的核壳结构和完美的球形,构成核的Fe3O4颗粒的尺寸在200～300 nm之间,Fe3...     

Photoelectron emission and XPS studies of real iron surfaces subjected to scratching in air,water, and organic liquids

The influence of temperature and surface overlayer on the photoelectron emission from scratched real iron surfaces was investigated using thermally assisted photoelectron emission (TAPE) and X‐ray photoelectron spectroscopy (XPS) measurements. The scratching was conducted with a diamond cutter in seven atmospheres. The intensity of TAPE as a function of temperature, called glow curve, was measured in the range 25–339 °C using a Geiger counter under ultraviolet irradiation at 210 nm. The temperature was scanned in two cycles (Up1 and Down1, and Up2 and Down2). The XPS measurements were carried out at 25 °C and after TAPE measurements at 200 and 339 °C. The photoelectron emission intensity at 40 °C in the Up1 scan increased in the order of air < water ≈ methanol ≈ cyclohexane < ethanol < benzene < acetone, and then each glow curve exhibited a gradual increase with temperature through a broad peak. It was found that the dependence of the emission intensity in the Up1 scan on the oxygen component ratio, Z_O = O^2?/(OH^? + O^2?) and the percentage of the Fe metal and FeOOH components of the Fe3p spectra for the atmospheres greatly differed. Additionally, the glow curve in the Up1 scan was completely different from that in the other scans. It was proposed that the photoelectron emission in the Up1 scan originates from not only the base metal but also the surface overlayer having trapped electrons and is strongly influenced by the acid–base interaction of the surface hydroxyl groups with the liquids molecules. Copyright © 2016 John Wiley & Sons, Ltd.     

Indole‐3‐acetic acid and N‐acetyltryptophan corrosion inhibition effects on mild steel in 1 M hydrochloric acid solution

Corrosion inhibition of indole‐3‐acetic acid and N‐acetyl tryptophan on carbon steel was investigated using polarization and electrochemical impedance spectroscopy (EIS). Polarization results revealed that corrosion inhibitors could reduce the rate of cathodic and anodic reactions on metal surface. EIS analysis showed inhibition efficiency of indoles increases by increasing the inhibitor concentration. The maximum inhibition efficiency was 97% and 80% in solutions containing 10 mM indole‐3‐acetic acid and 10 mM N‐acetyl tryptophan, respectively. The adsorption of inhibitors was found to follow Langmuir isotherm. Adsorption and film formation of inhibitors on the metal substrate were confirmed by calculating thermodynamic adsorption parameter (ΔG⁰_ads) and characterization of exposed metals' surface through contact angle measurements. Copyright © 2014 John Wiley & Sons, Ltd.