Living cationic polymerization of 2‐adamantyl vinyl ether

Living cationic polymerization of 2‐adamantyl vinyl ether (2‐vinyloxytricyclo[3.3.1.1]^3,7decane; 2‐AdVE) was achieved with the CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride/ethyl acetate [CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5/CH₃COOEt] initiating system in toluene at 0 °C. The number‐average molecular weights (M_n's) of the obtained poly(2‐AdVE)s increased in direct proportion to monomer conversion and produced the polymers with narrow molecular weight distributions (MWDs) (M_w/M_n = ～1.1). When a second monomer feed was added to the almost polymerized reaction mixture, the added monomer was completely consumed and the M_n's of the polymers showed a direct increase against conversion of the added monomer. Block and statistical copolymerization of 2‐AdVE with n‐butyl vinyl ether (CH₂?CH? O? CH₂ CH₂CH₂CH₃; NBVE) were possible via living process based on the same initiating system to give the corresponding copolymers with narrow MWDs. Grass transition temperature (T_g) and thermal decomposition temperature (T_d) of the poly(2‐AdVE) (e.g., M_n = 22,000, M_w/M_n = 1.17) were 178 and 323 °C, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1629–1637, 2008     

Role of added Lewis base and alkylaluminum halide on living cationic polymerization of vinyl ether

In the living cationic polymerization of isobutyl vinyl ether (IBVE) by the CH₃CH (OiBu) OCOCH₃ ( 1 )/EtAlCl₂ initiating system in the presence of the added base in hexane at +40°C, the stability of the initiating system 1 /EtAlCl₂, which form initiating species CH₃CH^⊕ (OiBu) derived from 1 , was investigated. In the presence of the Lewis base such as ethyl acetate or 1,4-dioxane, the active species was stable for 300 min even at +40°C in the absence of IBVE, and the living polymers were quantitatively obtained by adding IBVE. However, the active species was partly consumed by side reactions during the standing time for 60 min in the presence of a less basic additive such as ethyl benzoate, and about 50% of the active species was deactivated in the presence of methyl chloroacetate. Consequently, in the case of a less basic additive such as methyl chloroacetate (which was effective for the fast living polymerization), it can be seen that the careful selection of polymerization conditions was required. The living polymerization rate was dependent on the second order of EtAlCl₂ concentration. EtAlCl₂ induced the cleavage of 1 into CH₃CH^⊕ (OiBu) and EtAl^?Cl₂(OCOCH₃), and the reactivity of CH₃CH^⊕ (OiBu) and propagating carbocation may be controlled by EtAl^?Cl₂(OCOCH₃) with the aid of other EtAlCl₂. Et_1.5AlCl_1.5 exists as a bimetallic complex of EtAlCl₂ and Et₂AlCl, and it is expected that the polymers having a bimodal molecular weight distribution will be obtained due to two kinds of counteranions coming from EtAlCl₂ and Et₂AlCl. However, in the cationic polymerization of IBVE by 1 /Et_1.5AlCl_1.5 in the presence of ethyl acetate, the living polymer exhibiting a unimodal and very narrow molecular weight distribution was obtained. Thereby, it was suggested that the counteranions, EtAl^?Cl₂(OCOCH₃) and Et₂Al^?Cl(OCOCH₃), exchange rapidly with each other. © 1994 John Wiley & Sons, Inc.     

Fluorine‐containing vinyl ether polymers: Living cationic polymerization in fluorinated solvents as new media and unique solubility characteristics in organic solvents

Living cationic polymerization of fluorine‐containing vinyl ethers [CH₂?CH? O? C₂H₄? O? C₃H₆? C_nF_2n+1: 5FVE (n = 2), 13FVE (n = 6)] was investigated in various solvents with a CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5 initiating system in the presence of an added base. 5FVE was polymerized quantitatively in toluene at 0 °C, and the obtained polymers had predetermined molecular weights with narrow molecular weight distributions (M_w/M_n < 1.1). On the other hand, for the polymerization of 13FVE, the product polymers precipitated due to their extremely poor solubility in nonfluorinated organic solvents. Therefore, fluorinated solvents such as hydrochlorofluorocarbons, hydrofluorocarbons, hydrofluoroethers, or α,α,α‐trifluorotoluene, as‐yet uninvestigated for cationic polymerization, were employed. In these solvents, living polymerization was achieved even with 13FVE, yielding well‐defined polymers (M_w/M_n < 1.1, by size exclusion chromatography using a fluorinated solvent as an eluent). The solvents were also shown to be good for living polymerization of isobutyl vinyl ether. The obtained fluorine‐containing polymers underwent temperature‐responsive solubility transitions in organic solvents. Poly(5FVE) showed sensitive upper critical solution temperature (UCST)‐type phase separation behavior in toluene. Copolymers of 13FVE and isobutyl vinyl ether showed UCST‐type phase separation in common organic solvents with different polarities depending on their composition, while a homopolymer of 13FVE was insoluble in all nonfluorinated organic solvents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Iron‐catalyzed living radical polymerization of acrylates: Iodide‐based initiating systems and block and random copolymerizations

A half‐metallocene iron iodide complex [Fe(Cp)I(CO)₂] induced living radical polymerization of methyl acrylate (MA) in conjunction with an iodide initiator [(CH₃)₂C(CO₂Et)I, 1 ] and Al(Oi‐Pr)₃ to give polymers of controlled molecular weights and narrow molecular weight distributions (MWDs) (M_w/M_n < 1.2). With the use of chloride and bromide initiators, the MWDs were broader, whereas the molecular weights were similarly controlled. Other acrylates such as n‐butyl acrylate (nBA) and tert‐butyl acrylate (tBA) can be polymerized with 1 /Fe(Cp)I(CO)₂ in the presence of Ti(Oi‐Pr)₄ and Al(Oi‐Pr)₃, respectively, to give living polymers. The 1 /Fe(Cp)I(CO)₂ initiating system is applicable for the synthesis of block and random copolymers of acrylates (MA, nBA, and tBA) and styrene of controlled molecular weights and narrow MWDs (M_w/M_n = 1.2–1.3). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2033–2043, 2002     

Polymerization of MMA catalyzed by different novel mixed ligand lanthanocene{(Cp)(Cl) LnSchiff-base (THF)},(COT) -Ln(methoxyethylindenyl)(THF) /Al (i -Bu)_3 systems

This article deals that the rare earth metal complexes along with Al(i'-Bu),can catalyze the polymerization of methyl-methacrylate (MMA) into high molecular weight poly(MMA) along with narrow molecular weight distributions (MWD).A typical example was mentioned in the case of {Cp(Cl) Sm-Schiff-base(THF)} which expresses maximum (conv.% = 55.46 and Mn=354×103) efficiency along with narrow MWD (Mw/Mn<2) at 60℃.The resulting polymer was partially syndiotactic (>60%).The effect of the catalyst,temperature,catalyst/MMA molar ratio,catalyst/Al( i-Bu)3 molar ratio on the polymerization of MMA at 60℃ were also investigated.     

Preparation of high cis‐1,4 polyisoprene with narrow molecular weight distribution via coordinative chain transfer polymerization

High cis‐1,4 polyisoprene with narrow molecular weight distribution has been prepared via coordinative chain transfer polymerization (CCTP) using a homogeneous rare earth catalyst composed of neodymium versatate (Nd(vers)₃), dimethyldichlorosilane (Me₂SiCl₂), and diisobutylaluminum hydride (Al(i‐Bu)₂H) which has strong chain transfer affinity is used as both cocatalyst and chain transfer agent (CTA). Differentiating from the typical chain shuttling polymerization where dual‐catalysts/CSA system has been used, one catalyst/CTA system is used in this work, and the growing chain swapping between the identical active sites leads to the formation of high cis‐1,4 polyisoprene with narrowly distributed molecular weight. Sequential polymerization proves that irreversible chain termination reactions are negligible. Much smaller molecular weight of polymer obtained than that of stoichiometrically calculated illuminates that, differentiating from the typical living polymerization, several polymer chains can be produced by one neodymium atom. The effectiveness of Al(i‐Bu)₂H as a CTA is further testified by much broad molecular weight distribution of polymer when triisobutylaluminum (Al(i‐Bu)₃), a much weaker chain transfer agent, is used as cocatalyst instead of Al(i‐Bu)₂H. Finally, CCTP polymerization mechanism is validated by continuously decreased M_w/M_n value of polymer when increasing concentration of Al(i‐Bu)₂H extra added in the Nd(ver)₃/Me₂SiCl₂/Al(i‐Bu)₃ catalyst system. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Stimuli‐responsive reversible physical networks. II. Design and properties of homogeneous physical networks consisting of periodic copolymers synthesized by living cationic polymerization

The design and precision synthesis of physical networks consisting of copolymers with crystallizable pendant groups are described in this work. Amphiphilic periodic, statistical, and gradient copolymers consisting of octadecyl vinyl ether (ODVE) units were synthesized via living cationic polymerization. The synthesis involved the copolymerization of ODVE and 2‐methoxyethyl vinyl ether (hydrophilic) with an 1‐(isobutoxy)ethyl acetate [CH₃CH(OiBu)OCOCH₃]/Et_1.5AlCl_1.5 initiating system in the presence of a weak Lewis base to yield copolymers with very narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ? 1.2). All aqueous solutions of the copolymers behaved as a viscous liquid above 50 °C. When cooled below 25 °C, the solutions turned into transparent, transient physical gels (exhibiting terminal flow), regardless of the sequence distribution. Viscoelastic studies showed that a periodic copolymer gave a hard gel that was more brittle than the gels obtained from the corresponding statistical and gradient copolymers. This difference and the differences in the relaxation time and relaxation mode distribution of the copolymer gels were consistent with the sequence distributions of ODVE in the respective copolymers. These results indicate that the mechanical properties of a physical network can be controlled by the primary polymer structures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2712‐2722, 2005     

Living cationic polymerization of vinyl ethers with carboxylic acid/tin tetrahalide initiating systems. I. New initiating systems based on acetic acid and selection of Lewis acid and basic additive leading to living polymers with low polydispersity

Cationic polymerization of isobutyl vinyl ether (IBVE) with acetic acid (CH₃COOH)/tin tetrahalide (SnX₄: X = Cl, Br, I) initiating systems in toluene solvent at 0°C was investigated, and the reaction conditions for living polymerization of IBVE with the new initiating systems were established. Among these tin tetrahalides, SnBr₄ was found to be the most suitable Lewis acid to obtain living poly(IBVE) with a narrow molecular weight distribution (MWD). The polymerization with the CH₃COOH/SnBr₄ system, however, was accompanied with the formation of a small amount of another polymer fraction of very broad MWD, probably due to the occurrence of an uncontrolled initiation by SnBr₄ coupled with protonic impurity. Addition of 1,4-dioxane (1–1.25 vol %) or 2,6-di-tert-butylpyridine (0.1–0.6mM) to the polymerization mixture completely eliminated the uncontrolled polymer to give only the living polymer with very narrow MWD (M _w/M _n ≤ 1.1; M _w, weight-average molecular weight; M _n, number-average molecular weight). The M _n of the polymers increased in direct proportion to monomer conversion, continued to increase upon sequential addition of a fresh monomer feed, and was in good agreement with the calculated values assuming that one CH₃COOH molecule formed one polymer chain. Along with these results, kinetic study and direct ¹H-NMR observation of the living polymerization indicated that CH₃COOH and SnBr₄ act as so-called “initiator” and “activator”, respectively, and the living polymerization proceeds via an activation of the acetate dormant species. The basic additives such as 1,4-dioxane and 2,6-di-tert-butylpyridine would serve mainly as a “suppressor” of the uncontrolled initiation by SnBr₄. The polymers produced after quenching the living polymerization with methanol possessed the acetate dormant terminal and they induced living polymerization of IBVE in conjunction with SnBr₄ in the presence of 1,4-dioxane. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3173–3185, 1998     

Cationic polymerization of isobutylene by complexes of alkylaluminum dichlorides with diisopropyl ether: An activating effect of water

The RAlCl₂ × OⁱPr₂‐co‐initiated (R = ⁱBu or Et) cationic polymerization of isobutylene in the presence of externally added water (0.016–0.1 mM) in nonpolar n‐hexane at 10 °C and high monomer concentration ([IB] = 5.8 M) has been investigated. It was shown that the sequence of H₂O introduction into the system had the crucial effect on the polymerization rate, saturated monomer conversion, and, to a lesser extent, the content of exo‐olefin end groups. Particularly, the highest polymerization rate (>70% of monomer conversion in 10 min) and acceptable exo‐olefin end groups content (～83%) were observed when ⁱBuAlCl₂ × 0.8OⁱPr₂ reacted with suspended in n‐hexane H₂O before the monomer addition. Better functionality can be obtained when H₂O is introduced into the system in the course of the polymerization (after 3–10 min since the initiation of reaction). Under these conditions, highly reactive polyisobutylenes (exo‐olefin content is 86–89%) with desired low molecular weight (M_n = 1000–2000 g mol^?1) in a high yield (75–90% of monomer conversion in 20 min) were readily synthesized. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2386–2393     

Living/controlled cationic cyclopolymerization of divinyl ether with a cyclic acetal moiety: Synthesis of poly(vinyl ether)s with high glass transition temperature based on incorporation of cyclized main chain and cyclic side chains

Cationic cyclopolymerization of 2‐methyl‐5,5‐bis(vinyloxymethyl)‐1,3‐dioxane ( 1 ), a divinyl ether with a cyclic acetal group, was investigated with the HCl/ZnCl₂ initiating system in toluene and methylene chloride at ?30 °C. The reaction proceeded quantitatively to give gel‐free, soluble polymers in organic solvents. The number‐average molecular weight (M_n) of the polymers increased in direct proportion to monomer conversion, and further increased on addition of a fresh monomer feed to the almost completely polymerized reaction mixture, indicating that the polymerization proceeded in living/controlled manner. The contents of the unreacted vinyl groups in the produced soluble polymers were less than ～3 mol %, and therefore, the degree of cyclization was determined to be ～97%. In contrast, the pendant cyclic acetal groups remained intact in the polymers under the present cationic polymerization conditions. These facts show that cyclopolymerization of 1 almost exclusively occurred and the poly(vinyl ether)s with the cyclized repeating units and cyclic pendant acetal rings were obtained. Glass transition temperature (T_g) and thermal decomposition temperature (T_d) of poly( 1 ) (M_n = 7870, M_w/M_n = 1.57) were found to be 166 and 338 °C, respectively, indicating that poly( 1 ) had high T_g and high thermal stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 952–958, 2010     

Star-shaped polymers by living cationic polymerization. VII. Amphiphilic graft polymers of vinyl ethers with hydroxyl groups: Synthesis and host–guest interaction

Amphiphilic graft polymers of vinyl ethers (VEs) ( 6 ) where each branch consists of a hydrophilic polyalcohol and a hydrophobic poly(alkyl vinyl ether) segment were prepared on the basis of living cationic polymerization, and their properties and functions were compared with the corresponding amphiphilic star-shaped polymers. In toluene at ?15°C, the HI/ZnI₂-initiated living block polymer 2 of an ester-containing VE (CH₂? CHOCH₂CH₂OCOCH₃) and isobutyl VE (IBVE) was terminated with the diethyl 2-(vinyloxy)ethylmalonate anion [ 3 ; ^ΦC(COOEt)₂CH₂CH₂OCH ? CH₂] ( 2/3 = 1/2 mole ratio) to give a macromonomer ( 4 ), H[CH₂CH(OCH₂CH₂OCOCH₃)] _m-[CH₂CH(OiBu)]_n? C(COOEt)₂CH₂CH₂OCH ? CH₂ (m = 5, n = 15; M?_n = 2600, M?_w/M?_n = 1.13, 1.10 vinyl groups/chain). Subsequently, 4 was homopolymerized with HI/ZnI₂ in toluene at ?15°C. In 3 h, 85% of 4 was consumed and a graft polymer ( 5 ) was obtained [M?_w = 15000, DP_n (for 4 ) = 6]. The apparent M?_w (10,900) of 5 by size-exclusion chromatography (SEC) is smaller than that by light scattering as well as that (18,300) by SEC of the corresponding linear polymer with the almost same molecular weight, indicating the formation of a multi-branched structure. Hydrolysis of the pendant esters in 5 gave the amphiphilic graft polymer 6 where each branch consists of a hydrophilic polyalcohol and a hydrophobic poly(IBVE) segment. The graft polymer 6 was found to interact specifically with small organic molecules (guests) with polar functional groups, and 6 differed in solubility and host-guest interaction from the corresponding star-shaped polymer. © 1993 John Wiley & Sons, Inc.     

Living cationic polymerization of vinyl ethers with carboxylic acid/tin tetrahalide initiating systems. II. Effects of steric hindrance of carboxylate counteranions

Effects of steric crowding of the substituent of carboxylate counteranions on living cationic polymerization of isobutyl vinyl ether (IBVE) were investigated with the use of two series of carboxylic acids with various carbonyl substituents [RCOOH; R = (aliphatic series) CH₃CH₂, (CH₃)₂CH, (CH₃)₃C; (aromatic series) C₆H₅CH₂, (C₆H₅)₂CH, (C₆H₅)₃C] in conjunction with tin tetrabromide (SnBr₄) and 1,4-dioxane (DO) in toluene at 0°C. The overall polymerization rate increased with increasing the bulkiness of the substituents R in both the series: R = CH₃ (1) ≃ CH₃CH₂ (1) < (CH₃)₂CH (1.76) < (CH₃)₃C (2.31); C₆H₅CH₂ (0.84) < (C₆H₅)₂CH (0.98) < (C₆H₅)₃C (1.74); the values in the parentheses show the relative polymerization rate. In all the polymerizations, the number-average molecular weight (M_n) of the polymers was directly proportional to monomer conversion and in good agreement with the calculated values, assuming that one RCOOH molecule forms one polymer chain. The living nature of these polymerizations was further confirmed by a linear increase in M_n of the polymers upon sequential addition of a fresh monomer feed to the almost completely polymerized reaction mixtures. In the polymerizations with sterically less hindered carboxylic acids [R = CH₃CH₂, (CH₃)₂CH, C₆H₅CH₂, (C₆H₅)₂CH], the molecular weight distribution (MWD) of the polymers was very narrow (M_w/M_n < 1.1) throughout the polymerizations. In contrast, with bulkier substituent-containing counterparts [R = (CH₃)₃C, (C₆H₅)₃C], the polymerizations led to the polymers of relatively broad MWD (M_w/M_n ≅ 1.5 at ca. 100% monomer conversion). The bulky substituents such as (CH₃)₃C and (C₆H₅)₃C may decrease the interconversion rate between a dormant and an active species and increase the time-average concentration of the active growing species. The stereoregularity of the obtained polymers was not changed much with the steric environment of the counteranion (meso: 66–69%). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2923–2932, 1999     

Living cationic polymerization of vinyl ethers with a urethane group

To study the possibility of living cationic polymerization of vinyl ethers with a urethane group, 4‐vinyloxybutyl n‐butylcarbamate ( 1 ) and 4‐vinyloxybutyl phenylcarbamate ( 2 ) were polymerized with the hydrogen chloride/zinc chloride initiating system in methylene chloride solvent at ?30 °C ([monomer]₀ = 0.30 M, [HCl]₀/[ZnCl₂]₀ = 5.0/2.0 mM). The polymerization of 1 was very slow and gave only low‐molecular‐weight polymers with a number‐average molecular weight (M_n) of about 2000 even at 100% monomer conversion. The structural analysis of the products showed occurrence of chain‐transfer reactions because of the urethane group of monomer 1 . In contrast, the polymerization of vinyl ether 2 proceeded much faster than 1 and led to high‐molecular‐weight polymers with narrow molecular weight distributions (MWDs ≤ ～1.2) in quantitative yield. The M_n's of the product polymers increased in direct proportion to monomer conversion and continued to increase linearly after sequential addition of a fresh monomer feed to the almost completely polymerized reaction mixture, whereas the MWDs of the polymers remained narrow. These results indicated the formation of living polymer from vinyl ether 2 . The difference of living nature between monomers 1 and 2 was attributable to the difference of the electron‐withdrawing power of the carbamate substituents, namely, n‐butyl for 1 versus phenyl for 2 , of the monomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2960–2972, 2004     

Polymerization of 2‐pentene with Ni(II) α‐diimine complex/M‐MAO catalyst and structure of the polymer

Polymerization of 2‐pentene with [ArN?C(An)C(An)·NAr)NiBr₂ (Ar?2,6‐iPr₂C₆H₃)] ( 1‐Ni) /M‐MAO catalyst was investigated. A reactivity between trans‐2‐pentene and cis‐2‐pentene on the polymerization was quite different, and trans‐2‐pentene polymerized with 1‐Ni /M‐MAO catalyst to give a high molecular weight polymer. On the other hand, the polymerization of cis‐2‐butene with 1‐Ni /M‐MAO catalyst did not give any polymeric products. In the polymerization of mixture of trans‐ and cis‐2‐pentene with 1‐Ni /M‐MAO catalyst, the M_n of the polymer increased with an increase of the polymer yields. However, the relationship between polymer yield and the M_n of the polymer did not give a strict straight line, and the M_w/M_n also increased with increasing polymer yield. This suggests that side reactions were induced during the polymerization. The structures of the polymer obtained from the polymerization of 2‐ pentene with 1‐Ni /M‐MAO catalyst consists of ? CH₂? CH₂? CH(CH₂CH₃)? , ? CH₂? CH₂? CH₂? CH(CH₃)? , ? CH₂? CH(CH₂CH₂CH₃)? , and methylene sequence ? (CH₂)_n? (n ≥ 5) units, which is related to the chain walking mechanism. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2858–2863, 2008     

Acyclic diene metathesis polymerization of 2,5‐dialkyl‐1,4‐divinylbenzene with molybdenum or ruthenium catalysts: Factors affecting the precise synthesis of defect‐free,high‐molecular‐weight trans‐poly(p‐phenylene vinylene)s

Factors affecting the syntheses of high‐molecular‐weight poly(2,5‐dialkyl‐1,4‐phenylene vinylene) by the acyclic diene metathesis polymerization of 2,5‐dialkyl‐1,4‐divinylbenzenes [alkyl = n‐octyl ( 2 ) and 2‐ethylhexyl ( 3 )] with a molybdenum or ruthenium catalyst were explored. The polymerizations of 2 by Mo(N‐2,6‐Me₂C₆H₃) (CHMe₂ Ph)[OCMe(CF₃)₂]₂ at 25 °C was completed with both a high initial monomer concentration and reduced pressure, affording poly(p‐phenylene vinylene)s with low polydispersity index values (number‐average molecular weight = 3.3–3.65 × 10³ by gel permeation chromatography vs polystyrene standards, weight‐average molecular weight/number‐average molecular weight = 1.1–1.2), but the polymerization of 3 was not completed under the same conditions. The synthesis of structurally regular (all‐trans), defect‐free, high‐molecular‐weight 2‐ethylhexyl substituted poly(p‐phenylene vinylene)s [poly 3 ; degree of monomer repeating unit (DP_n) = ca. 16–70 by ¹H NMR] with unimodal molecular weight distributions (number‐average molecular weight = 8.30–36.3 × 10³ by gel permeation chromatography, weight‐average molecular weight/number‐average molecular weight = 1.6–2.1) and with defined polymer chain ends (as a vinyl group, ? CH?CH₂) was achieved when Ru(CHPh)(Cl)₂(IMesH₂)(PCy₃) or Ru(CH‐2‐OⁱPr‐C₆H₄)(Cl)₂(IMesH₂) [IMesH₂ = 1,3‐bis(2,4,6‐trimethylphenyl)‐2‐imidazolidinylidene] was employed as a catalyst at 50 °C. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6166–6177, 2005     

Titanium complexes of dialkanolamine ligands as initiators for living ring‐opening polymerization of ε‐caprolactone

The titanium complexes with one ( 1a , 1b , 1c ) and two ( 2a , 2b ) dialkanolamine ligands were used as initiators in the ring‐opening polymerization (ROP) of ε‐caprolactone. Titanocanes 1a and 1b initiated living ROP of ε‐caprolactone affording polymers whose number‐average molecular weights (M_n) increased in direct proportion to monomer conversion (M_n ≤ 30,000 g mol^?1) in agreement with calculated values, and were inversely proportional to initiator concentration, while the molecular weight distribution stayed narrow throughout the polymerization (M_w/M_n ≤ 1.2 up to 80% monomer conversion). ¹H‐NMR and MALDI‐TOF‐MS studies of the obtained poly(ε‐caprolactone)s revealed the presence of an isopropoxy group originated from the initiator at the polymer termini, indicating that the polymerization takes place exclusively at the Ti–OⁱPr bond of the catalyst. The higher molecular weight polymers (M_n ≤ 70,000 g mol^?1) with reasonable MWD (M_w/M_n ≤ 1.6) were synthesized by living ROP of ε‐caprolactone using spirobititanocanes ( 2a , 2b ) and titanocane 1c as initiators. The latter catalysts, according MALDI‐TOF‐MS data, afford poly(ε‐caprolactone)s with almost equal content of α,ω‐dihydroxyl‐ and α‐hydroxyl‐ω(carboxylic acid)‐terminated chains arising due to monomer insertion into “Ti–O” bond of dialkanolamine ligand and from initiation via traces of water, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1230–1240, 2010     

A Facile,Controlled Synthesis of Soluble Star Polymers Containing a Sugar Residue by Ring-Opening Metathesis Polymerization (ROMP)

Summary: Precise syntheses of soluble star polymers containing a sugar residue could be attained by adopting sequential ring-opening metathesis polymerizations of norbornene, 1,4,4a,5,8,8a-hexahydro-1,4,5,8-exo-endo-dimethanonaphtalene, and then 1,2:3,4-di-O-isopropylidene-α-D-galacto-pyranos-6-O-yl 5-norbornene-2-carboxylate using Mo(CHCMe₂Ph)(N-2,6-ⁱPr₂C₆H₃)(O^tBu)₂. The resultant polymers possessed uniform molecular weight distributions, and the M_n values could be varied by the monomer/Mo molar ratios; their spherical images were observed in the TEM micrographs.     

Controlled synthesis of glycopolymers with pendant D-glucosamine residues by living cationic polymerization

D -glucosamine-containing glycopolymers with well-controlled structure were synthesized by living cationic polymerization. To this end, D -glucosamine-containing vinyl ether (VE) of the type [CH₂()CH(OCH₂CH₂OR)] was prepared, where R denotes a 3,4,6-tri-O-acetyl-2-deoxy-2-phthalimide-β-D -glucopyranoside, i.e., the hydroxyl and amino groups in D -glucosamine residues are protected by acetyl and phthaloyl groups, respectively. It was found that (1) the efficient living cationic polymerization of VE monomer is achieved by a combination of ethylaluminum dichloride (EtAlCl₂) with an adduct of trifluoroacetic acid (TFA) and isobutyl VE (IBVE) [CH₃CH(OiBu)OCOCF₃] (i.e., TFA/EtAlCl₂ initiating system); and (2) the polymerization in toluene at the elevated temperature (0°C) is most suitable to proceed the homogeneous polymerization over the whole conversion range. The molecular weight distribution of the resulting polymers was very narrow ($ {\bar M}_w/{\bar M}_n \sim 1.1 $). Quantitative deprotection of the resulting precursor polymers was successfully achieved with hydrazine monohydrate to afford the corresponding water-soluble polymers with pendant D -glucosamine residues. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 751–757, 1997     

Phase transfer catalyzed single electron transfer–degenerative chain transfer mediated living radical polymerization (PTC‐SET–DTLRP) of vinyl chloride catalyzed by sodium dithionite and initiated with iodoform in water at 43 °C

To accelerate the living radical polymerization (LRP) of vinyl chloride (VC) in water the phase transfer catalyzed single electron transfer–degenerative chain transfer mediated living radical polymerization (SET–DTLRP) of VC mediated by sodium dithionite (Na₂S₂O₄) was investigated. The fastest polymerization reaction that still produces thermally stable poly(vinyl chloride) (PVC) takes place at 43 °C with the ratio [PTC]₀/[Na₂S₂O₄]₀ = 0.0075/1. Cetyltrimethylammonium bromide (nC₁₆H₃₃(CH₃)₃N⁺Br^?, CetMe₃NBr) was the phase‐transfer catalyst (PTC) of choice. Under these conditions the first, fast stage of SET–DTLRP of VC was accomplished within 7–8 h when the initial ratio monomer/initiator [VC]₀/[CHI₃]₀ was 800. The number‐average molecular weight (M_n) of the resulting PVC was in good agreement with the theoretical molecular weight (M_th). When the [VC]₀/[CHI₃]₀ ratio was 4800, the fast step of the reaction was accomplished within 17 h, to produce 72% monomer conversion. A deviation of the M_n from the M_th was observed in this case. Possible mechanistic explanations for this deviation as well as for the phase transfer catalyzed SET–DTLRP of VC were suggested. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 779–788, 2005     

Living cationic polymerization of an azide‐containing vinyl ether toward addressable functionalization of polymers

We first achieved the living cationic polymerization of azide‐containing monomer, 2‐azidoethyl vinyl ether (AzVE), with SnCl₄ as a catalyst (activator) in conjunction with the HCl adduct of a vinyl ether [H‐CH₂CH(OR)‐Cl; R ? CH₂CH₂Cl, CH₂CH(CH₃)₂]. Despite the potentially poisoning azide group, the produced polymers possessed controlled molecular weights and fairly narrow distributions (M_w/M_n ～ 1.2) and gave block polymers with 2‐chloroethyl vinyl ether. The pendent azide groups are easily converted into various functional groups via mild and selective reactions, such as the Staudinger reduction and copper‐catalyzed azide‐alkyne 1,3‐cycloaddition (CuAAC; a “click” reaction). These reactions led to quantitative pendent functionalization into primary amine (? NH₂), hydroxy (? OH), and carboxyl (? COOH) groups, at room temperature and without any acidic or basic treatment. Thus, poly(AzVE) is a versatile precursor for a wide variety of functional vinyl ether polymers with well‐defined structures and molecular weights. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1449–1455, 2010