Development of standards for reliable surface analyses by ISO technical committee 201 on surface chemical analysis

The need for reliable surface analyses together with quality‐management requirements for analytical laboratories led the International Organization for Standardization (ISO) to form its Technical Committee (TC) 201 on Surface Chemical Analysis in 1991. This article describes the organization of TC 201, the strategies that have been found useful for identifying and assessing possible projects for new international standards, and the 57 international standards and other documents prepared to date by TC 201. Standards have now been developed for Auger‐electron spectroscopy, glow‐discharge spectroscopy, various types of scanning probe microscopy, secondary‐ion mass spectrometry, sputter‐depth profiling, total‐reflection X‐ray fluorescence spectroscopy, X‐ray photoelectron spectroscopy, and X‐ray reflectometry. In addition, standards have been developed with definitions of terms used in surface chemical analysis; the handling, preparation of specimens for surface analysis; information and data‐transfer formats; and methods for determining the lateral resolution of beam‐based methods of surface analysis. Copyright © 2014 John Wiley & Sons, Ltd.     

Importance of sample preparation on reliable surface characterisation of nano‐objects: ISO standard 20579‐4

The international ISO Standard 20579‐4, dealing with the history and preparation of nano‐objects for surface analysis, has been developed to help address some of the replication and reproducibility issues caused by the fundamental nature of nano‐objects. Although all types of samples requiring surface analysis need thoughtful preparation, nano‐objects, for which many properties are controlled by their surfaces, present additional challenges in order to avoid variations and artefacts due to the handling and preparation of materials prior to analysis. This international standard is part of a series of standards related to preparation of samples for surface chemical analysis. Parts 1 and 2 of ISO Standard series 20579 address general issues that apply to many samples. Part 3, which is still in development, will focus on biomaterials. Part 4 specifically considers issues that arise due to the inherent nature of nano‐objects. Because of sensitivity to their environment, the standard indicates the minimum information that needs to be reported about the handling and preparation of nano‐objects prior to surface analysis. This information should become part of sample provenance information that helps assure the reliability and usefulness of data obtained from surface‐analysis in the context of the synthesis, processing, and analysis history of a batch of material. Application of this standard can help address reproducibility and traceability issues associated with synthesis, processing, and characterization of nano‐objects in research and commercial applications.     

Chemical Imaging of Monolayers on Metal Surfaces: Applications in Corrosion,Catalysis, and Self‐Assembled Monolayers

In situ techniques are indispensable to understanding many topics in surface chemistry. As a consequence, several spectroscopic methods have been developed to provide molecular‐level information that only spectroscopy can supply. However, as important as this information is, it is just as critical to realize that nearly all surfaces under investigation have spatial heterogeneities of the order of nanometers to millimeters; thus, spatial analysis is very important to the overall interpretation. This Minireview focuses on a few of the recent developments in spectroscopic techniques that can provide spatial, spectroscopic, and in situ information. These techniques include photo‐electron microscopy, infrared and Raman imaging, and nonlinear optical imaging vibrational spectroscopy as applied to topics in corrosion, catalysis and self‐assembled monolayers.     

Application of surface analysis methods to nanomaterials: summary of ISO/TC 201 technical report: ISO 14187:2011 – surface chemical analysis – characterization of nanomaterials

The ISO technical report 14187 provides an introduction to (and examples of) the information that can be obtained about nanostructured materials by using surface analysis tools. In addition, both general issues and challenges associated with characterizing nanostructured materials and the specific opportunities and challenges associated with individual analytical methods are identified. As the size of objects or components of materials approaches a few nanometers, the distinctions among ‘bulk’, ‘surface’, and ‘particle’ analysis blur. This technical report focuses on issues specifically relevant to surface chemical analysis of nanostructured materials. The report considers a variety of analysis methods but focuses on techniques that are in the domain of ISO/TC 201 including Auger electron spectroscopy, X‐ray photoelectron spectroscopy, secondary ion mass spectrometry, and scanning probe microscopy. Measurements of nanoparticle surface properties such as surface potential that are often made in a solution are not discussed. Copyright © 2012 John Wiley & Sons, Ltd.     

ToF‐SIMS analysis of a polymer microarray composed of poly(meth)acrylates with C6 derivative pendant groups

Surface analysis plays a key role in understanding the function of materials, particularly in biological environments. Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) provides highly surface sensitive chemical information that can readily be acquired over large areas and has, thus, become an important surface analysis tool. However, the information‐rich nature of ToF‐SIMS complicates the interpretation and comparison of spectra, particularly in cases where multicomponent samples are being assessed. In this study, a method is presented to assess the chemical variance across 16 poly(meth)acrylates. Materials are selected to contain C₆ pendant groups, and ten replicates of each are printed as a polymer microarray. SIMS spectra are acquired for each material with the most intense and unique ions assessed for each material to identify the predominant and distinctive fragmentation pathways within the materials studied. Differentiating acrylate/methacrylate pairs is readily achieved using secondary ions derived from both the polymer backbone and pendant groups. Principal component analysis (PCA) is performed on the SIMS spectra of the 16 polymers, whereby the resulting principal components are able to distinguish phenyl from benzyl groups, mono‐functional from multi‐functional monomers and acrylates from methacrylates. The principal components are applied to copolymer series to assess the predictive capabilities of the PCA. Beyond being able to predict the copolymer ratio, in some cases, the SIMS analysis is able to provide insight into the molecular sequence of a copolymer. The insight gained in this study will be beneficial for developing structure–function relationships based upon ToF‐SIMS data of polymer libraries. © 2016 The Authors Surface and Interface Analysis Published by John Wiley & Sons Ltd.     

Revealing the Fine Details of Functionalized Silica Surfaces by Solid‐State NMR and Adsorption Isotherm Measurements: The Case of Fluorinated Stationary Phases for Liquid Chromatography

The structural and chromatographic characterization of two novel fluorinated mesoporous materials prepared by covalent reaction of 3‐(pentafluorophenyl)propyldimethylchlorosilane and perfluorohexylethyltrichlorosilane with 2.5 μm fully porous silica particles is reported. The adsorbents were characterized by solid state ²⁹Si, ¹³C, and ¹⁹F NMR spectroscopy, low‐temperature nitrogen adsorption, elemental analysis (C and F), and various chromatographic measurements, including the determination of adsorption isotherms. The structure and abundance of the different organic surface species, as well as the different silanol types, were determined. In particular, the degree of so‐called horizontal polymerization, that is, Si‐O‐Si bridging parallel to the silica surface due to the reaction, under “quasi‐dry” conditions, of trifunctional silanizing agents with the silica surface was quantified. Significant agreement was found between the information provided by solid‐state NMR, elemental analysis, and excess isotherms regarding the amount of surface residual silanol groups, on the one hand, and the degree of surface functionalization, on the other. Finally, the kinetic performance of the fluorinated materials as separation media for applications in near‐ultrahigh‐performance liquid chromatography was evaluated. At reduced velocities of about 5.5 (ca. 600 bar backpressure at room temperature) with 3 mm diameter columns and toluene as test compound, reduced plate heights on the order of 2 were obtained on columns of both adsorbents.     

Multivariate analysis of ToF‐SIMS data using mass segmented peak lists

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) provides detailed molecular insight into the surface chemistry of a diverse range of material types. Extracting useful and specific information from the mass spectra and reducing the dimensionality of very large datasets are a challenge that has not been fully resolved. Multivariate analysis has been widely deployed to assist in the interpretation of ToF‐SIMS data. Principal component analysis is a popular approach that requires the generation of peak lists for every spectrum. Peak list sizes and the resulting data matrices are growing, complicating manual peak selection and analysis. Here we report the generation of very large ToF‐SIMS peak lists using up‐binning, the mass segmentation of spectral data in the range 0 to 300 m/z in 0.01 m/z intervals. Time‐of‐flight secondary ion mass spectrometry data acquired from a set of 4 standard polymers (polyethylene terephthalate, polytetrafluoroethylene, poly(methyl methacrylate), and low‐density polyethylene) are used to demonstrate the efficacy of this approach. The polymer types are discriminated to a moderate extent by principal component analysis but are easily skewed with saturated species or contaminants present in ToF‐SIMS data. Artificial neural networks, in the form of self‐organising maps, are introduced and provide a non‐linear approach to classifying data and focussing on similarities between samples. The classification outcome achieved is excellent for different polymer types and for spectra from a single polymer type generated by using different primary ions. This method offers great promise for the investigation of more complex systems including polymer classes and blends and mixtures of biological materials.     

Quantitative analysis of trace levels of surface contamination by X‐ray photoelectron spectroscopy. Part II: Systematic uncertainties and absolute quantification

We discuss analyses of trace levels of surface contamination using X‐ray photoelectron spectroscopy (XPS). The problem of quantifying common sources of statistical and systematic uncertainties for these measurements is formulated in terms of the needs of extreme ultraviolet lithography, but the results and conclusions are applicable to a broad range of XPS applications. We quantify the systematic uncertainties introduced by particular cases of overlapping peaks on different substrate structures by simulating measured spectra with the National Institute of Standards and Technology Database for the Simulation of Electron Spectra for Surface Analysis (SESSA). One example demonstrates that the relative atomic concentrations of trace elements such as S, P, and halogens on a Ru surface could be dramatically overestimated if the fitting of the overlapping Ru 3d and C 1s peaks excludes the contribution from carbon. We also show how spectra generated by SESSA can be compared with measured spectra to determine absolute amounts of surface impurities on layered samples of the type used for extreme ultraviolet lithography. We provide estimates of the total uncertainty for such measurements by considering the systematic limitations of SESSA and the statistical uncertainties of the measurements. The same procedure can be employed for other multilayered materials. Finally, we describe two approaches for converting XPS detection limits for an elemental impurity in an elemental matrix to the corresponding detection limits for the impurity as a thin film on the surface of the matrix material.     

Studies of AuNi alloys by electron spectroscopies with the aid of the line shape analysis by the pattern recognition method

The spectrum of electrons elastically backscattered from the surface and within its vicinity reflects the probability of electron elastic backscattering on the surface atoms, quasi‐elastic scattering and the inelastic scattering visible in the low energy side of the elastic peak. The method for investigating the processes of electron elastic backscattering on the surface atom is called the elastic peak electron spectroscopy (EPES). In the present work, AuNi alloys of different compositions are investigated using X‐ray photoelectron spectroscopy (XPS) and the EPES method with the aid of the line shape analysis called the fuzzy k‐nearest neighbour (fkNN) rule. The line shape analysis was found to be applicable for EPES spectroscopy. It allows distinguishing the surfaces exhibiting various surface roughness, texture and grain size, and quantifying the selected information depths. The quantitative results obtained from the XPS analysis and the EPES spectra line shape analysis indicated Au surface segregation with Au surface enriched profile. Quantitative discrepancies are discussed within the non‐uniform concentration profiles of constituents due to sputter cleaning and annealing, different diffusion coefficients for Au and Ni, differences in the information depths sampled by XPS and EPES methods and differences in electron elastic backscattering cross‐sections for Ni and Au. Copyright © 2006 John Wiley & Sons, Ltd.     

Nanoscale Chemical Imaging Using Tip‐Enhanced Raman Spectroscopy: A Critical Review

Methods for chemical analysis at the nanometer scale are crucial for understanding and characterizing nanostructures of modern materials and biological systems. Tip‐enhanced Raman spectroscopy (TERS) combines the chemical information provided by Raman spectroscopy with the signal enhancement known from surface‐enhanced Raman scattering (SERS) and the high spatial resolution of atomic force microscopy (AFM) or scanning tunneling microscopy (STM). A metallic or metallized tip is illuminated by a focused laser beam and the resulting strongly enhanced electromagnetic field at the tip apex acts as a highly confined light source for Raman spectroscopic measurements. This Review focuses on the prerequisites for the efficient coupling of light to the tip as well as the shortcomings and pitfalls that have to be considered for TERS imaging, a fascinating but still challenging way to look at the nanoworld. Finally, examples from recent publications have been selected to demonstrate the potential of this technique for chemical imaging with a spatial resolution of approximately 10 nm and sensitivity down to the single‐molecule level for applications ranging from materials sciences to life sciences.     

Extraction of hidden information of ToF‐SIMS data using different multivariate analyses

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) is a powerful tool for determining surface information of complex systems such as polymers and biological materials. However, the interpretation of ToF‐SIMS raw data is often difficult. Multivariate analysis has become effective methods for the interpretation of ToF‐SIMS data. Some of multivariate analysis methods such as principal component analysis and multivariate curve resolution are useful for simplifying ToF‐SIMS data consisting of many components to that explained by a smaller number of components. In this study, the ToF‐SIMS data of four layers of three polymers was analyzed using these analysis methods. The information acquired by using each method was compared in terms of the spatial distribution of the polymers and identification. Moreover, in order to investigate the influence of surface contamination, the ToF‐SIMS data before and after Ar cluster ion beam sputtering was compared. As a result, materials in the sample of multiple components, including unknown contaminants, were distinguished. Copyright © 2014 John Wiley & Sons, Ltd.     

光电流谱、光致发光光谱和紫外可见吸收光谱在纳米半导体光电器件研究中的联用

在纳米半导体中由于纳米效应(如量子尺寸效应),其电子结构与块体半导体有所不同。进一步地,当纳米半导体与基底和其他组分结合制成器件后,其性质又受到基底或其他组分的影响,这两点导致了基于纳米半导体的光电器件的性能以及相应表征方法也大不相同。将光电流谱、光致发光光谱和紫外可见吸收光谱三种技术有机地结合起来,可以更好地表征纳米半导体的电子性质和光电性能。本文根据纳米半导体材料与电极的电子性质特点及其测量,结合本课题组前期工作,举例介绍三种谱学方法相结合应用于探究光伏电池和电致发光器件的纳米半导体材料的性能,以及纳米半导体材料表面态的表征。     

Noble‐Metal‐Free Materials for Surface‐Enhanced Raman Spectroscopy Detection

Surface‐enhanced Raman spectroscopy (SERS) is an attractive tool for the sensing of molecules in the fields of chemical and biochemical analysis as it enables the sensitive detection of molecular fingerprint information even at the single‐molecule level. In addition to traditional coinage metals in SERS analysis, recent research on noble‐metal‐free materials has also yielded highly sensitive SERS activity. This Minireview presents the recent development of noble‐metal‐free materials as SERS substrates and their potential applications, especially semiconductors and emerging graphene‐based nanostructures. Rather than providing an exhaustive review of this field, possible contributions from semiconductor substrates, characteristics of graphene enhanced Raman scattering, as well as effect factors such as surface plasmon resonance, structure and defects of the nanostructures that are considered essential for SERS activity are emphasized. The intention is to illustrate, through these examples, that the promise of noble‐metal‐free materials for enhancing detection sensitivity can further fuel the development of SERS‐related applications.     

Electrochemical Sensors Continuously Monitor Magnesium Biodegradation under Cell Culture Conditions

Magnesium (Mg) and its alloys have increasingly been considered as implant materials for orthopedic, craniofacial, and cardiovascular applications. These materials generally have mechanical properties close to those of human bone and they biodegrade in aqueous environments. The biodegradation properties can be tailored to fit the desired application by changing the alloying elements and/or by addition of surface coatings. To test and compare the biodegradation properties of different materials, immersion tests in solutions ranging from simple salt solutions to complex biological media are commonly done that yield some information about the biodegradation rate and the biodegradation products on the surface after completion of the test. Here we report on a method that allows the continuous real‐time monitoring of the biodegradation process using electrochemical sensors for pH and H₂ during immersion of Mg samples in the cell culture medium DMEM/F12 with different concentrations of fetal bovine serum and in the presence of living cells. The sensors effectively indicated the biodegradation behavior of Mg samples in real‐time. This system could be very useful for immersion tests and even supporting biocompatibility testing of implant materials.     

Radiation‐induced migration of additives in PVC‐based biomedical disposable devices Part 2. Surface analysis by XPS

Extruded parts of non‐sterilized and β‐irradiated (25 and 50 kGy) plasticized poly(vinyl chloride) (PVC) used for disposable medical devices have been studied to investigate the effect of sterilization on surface chemical composition. The polymer surfaces were analysed using angle‐resolved x‐ray photoelectron spectroscopy. The inner surface of the blood tubing lines showed a fairly smooth surface both before and after sterilization, so a laterally homogeneous surface can be assumed for XPS analysis. The XPS survey spectra exhibited no signals besides carbon, chlorine, oxygen and calcium. Detailed analysis of the regions showed the C 1s, Cl 2p and O 1s signals to be multi‐component, presenting signals of the PVC, the plasticizer and the other additives. Binding energies remained constant irrespective of β‐radiation dosage, but the amount of chlorine component at 198.4 ± 0.1 eV (associated with modified PVC) decreased with sterilization dosage. Angle‐resolved XPS revealed that this component is located at the outermost surface of the polymer. It can be hypothesized that the production processes themselves (extrusion and/or injection molded) already induce modifications of the polymer surface and also lead to surface segregation of the plasticizer. During the subsequent thermal sterilization of the polymer dehydrochlorination continues but, because of the very short time required by the β‐irradiation technology to sterilize devices, the atmospheric oxygen is unable to diffuse into the irradiated material, thus inhibiting further side‐degradation of the materials, such as thermo‐oxidative degradation. Copyright © 2003 John Wiley & Sons, Ltd.     

Following the Azide‐Alkyne Cycloaddition at the Silica/Solvent Interface with Sum Frequency Generation

The Cu^I‐catalyzed 1,3‐dipolar azide‐alkyne cycloaddition (CuAAC) has arisen as one of the most useful chemical transformations for introducing complexity onto surfaces and materials owing to its functional‐group tolerance and high yield. However, methods for monitoring such reactions in situ at the widely used silica/solvent interface are hampered by challenges associated with probing such buried interfaces. Using the surface‐specific technique broadband sum frequency generation (SFG), we monitored the reaction of a benzyl azide monolayer in real time at the silica/methanol interface. A strong peak at 2096 cm^?1 assigned to the azides was observed for the first time by SFG. Using a cyano‐substituted alkyne, the decrease of the azide peak and the increase of the cyano peak (2234 cm^?1) were probed simultaneously. From the kinetic analysis, the reaction order with respect to copper was determined to be 2.1, suggesting that CuAAC on the surface follows a similar mechanism as in solution.     

Oxadiazole‐2‐thiol Adsorption on Gold Nanorods: A Joint Theoretical and Experimental Study by Using SERS,XPS, and DFT

The chemisorption of 1,3,4‐oxadiazole‐2‐thiol (ODT) on gold nanorods has been investigated by using surface‐enhanced Raman spectroscopy (SERS) and density functional theory (DFT). Although most of the SERS spectra have remarkable similarity to the normal Raman spectra of the pure analyte, the adsorption of ODT on a gold surface leads to a drastic change in its Raman spectrum and distinct vibrational features are obtained with gold nanorods and spherical nanoparticles. Simulated Raman spectra for hybrid systems that consist of an oxadiazole moiety coordinated to a Au₂₀ gold cluster provided valuable information about the coordination mode and enabled us to assign vibration modes.     

Imaging Nanometre‐Sized Hot Spots on Smooth Au Films with High‐Resolution Tip‐Enhanced Luminescence and Raman Near‐Field Optical Microscopy

A novel near‐field optical microscope based on a parabolic mirror is used for recording high‐resolution tip‐enhanced photoluminescence (PL) and Raman images with unprecedented sensitivity and contrast. The measurements reveal small islands on the Au surface with dimensions of only a few nanometres with locally enhanced Au PL. These islands appear as nanometre‐sized hot spots in tip‐enhanced Raman microscopy when benzotriazole molecules adsorbed on the Au surface serve as local sensors for the optical field. The spectra show that localized plasmons are the cause of both the locally enhanced Au PL and enhanced Raman scattering. This finding suggests that the dispersive background in the surface‐enhanced Raman spectra can be explained simply by the enhanced Au PL in the gap. Furthermore, our results show that the surface flatness must be better than 1 nm, to provide an optically homogeneous substrate for near‐field enhanced PL and Raman spectroscopy.     

Single Molecules as Optical Nanoprobes for Soft and Complex Matter

The optical signals of single molecules provide information about structure and dynamics of their nanoscale environment, free from space and time averaging. These new data are particularly useful whenever complex structures or dynamics are present, as in polymers or in porous oxides, but also in many other classes of materials, where heterogeneity is less obvious. We review the main uses of single molecules in studies of condensed matter at nanometer scales, especially in the fields of soft matter and materials science. We discuss several examples, including the orientation distribution of molecules in crystals, rotational diffusion in glass‐forming molecular liquids, polymer studies with probes and labeled chains, porous and heterogeneous oxide materials, blinking of single molecules and nanocrystals, and the potential of surface‐enhanced Raman scattering for local chemical analysis. All these examples show that static and dynamic heterogeneities and the spread of molecular parameters are much larger than previously imagined.     

Covalent Reactions on Chemical Vapor Deposition Grown Graphene Studied by Surface‐Enhanced Raman Spectroscopy

Graphene is a material of unmatched properties and eminent potential in disciplines ranging from physics, to chemistry, to biology. Its advancement to applications with a specific function requires rational design and fine tuning of its properties, and covalent introduction of various substituents answers this requirement. We challenged the obstacle of non‐trivial and harsh procedures for covalent functionalization of pristine graphene and developed a protocol for mild nucleophilic introduction of organic groups in the gas phase. The painstaking analysis problem of monolayered materials was addressed by using surface‐enhanced Raman spectroscopy, which allowed us to monitor and characterize in detail the surface composition. These deliverables provide a toolbox for reactivity of fluorinated graphene under mild reaction conditions, providing structural freedom of the species to‐be‐grafted to the single‐layer graphene.