The symmetry group of nonrigid tetramethylsilane

Using nonrigid group theory, it is shown that the full nonrigid (f‐NRG) group of tetramethylsilane is isomorphic to the group C₃ S₄ of order 1944, where “” denotes the wreath product of groups, and C₃ and S₄ are the cyclic group of order three and the symmetric group of order four, respectively. This group has 51 conjugacy classes and irreducible representations. Then the character table of tetramethylsilane is derived for the first time. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Computing the full nonrigid group of tetra‐tert‐butyltetrahedrane using wreath product

The concept of symmetry group of nonrigid molecules as a permutation‐inversion group was formulated first by Longuet‐Higgins, although earlier works suggested the need for such a framework. Then Balasubramanian showed that these groups could be cast into elegant algebraic structures known as the wreath product of groups. In this study, we apply a similar method to that used by Balasubramanian to find the nonrigid group (NRG) of tetra‐tert‐butyltetrahedrane. Using the group theory package GAP, we calculate the conjugacy classes and character table of this molecule. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

1H NMR for quantifying sulfide trapping efficiency by using 1,3,5‐tris(2‐hydroxyethyl)‐1,3,5‐triazinane

Hydrogen sulfide (H₂S) is an extremely toxic colourless gas; it is corrosive and denser than air. It usually happens in oil and natural gas fields, refineries, coal mines, and in some industrial effluent treatment systems. This work presents an alternative method of monitoring and quantifying H₂S trapping efficiency by using 1,3,5‐tris(2‐hydroxyethyl)‐1,3,5‐triazinane as a sequestering agent, and sodium sulfide as a source of sulfide ion, through ¹H NMR spectroscopy. The results proved that the reaction occurs very quickly at 20 °C at pH 7 and 10. 3,5‐di(2‐hydroxyethyl)‐1,3,5‐thiodiazinane and 5‐(2‐hydroxyethyl)‐1,3,5‐dithiozinane were observed and quantified; it was evidenced that ¹H NMR spectroscopy can be applied as a fast and effective method to quantify H₂S trapping efficiency. Copyright © 2014 John Wiley & Sons, Ltd.     

DFT Study of the Group Interactions in 1,3,5‐Triamino‐2,4,6‐Trinitrobenzene and 1,3,5‐Triamino‐2,4,6‐Tridifluoroaminobenzene

Density functional calculations on isodesmic disproportionation reactions of 1,3,5‐triamino‐2,4,6‐trinitrobenzene (TATB) and 1,3,5‐triamino‐2,4,6‐tridifluoroaminobenzene (TATDB) indicate that the interaction between nitro groups on meta carbons of TATB, which brings about unstability to the molecule, is surprisingly larger than that between difluroamino groups in TATDB. The electron‐withdrawing and electron‐donating groups generate large positive and very small negative values of E_{disproportion}, respectively. When both electron‐withdrawing and electron‐donating groups are attached to the benzene skeleton at the same time, large negative disproportionation energy is produced, which stabilizes the derivatives. The values of E_{disproportion} for TATB and TATDB are predicted to be ‐48.03 kJ/mol and ‐63.54 kJ/mol, respectively, indicating that the total interaction among groups with stabilization effects in TATDB is larger than that in TATB. The large difference of the E_{disproportion} values between TATB and TATDB is derived from the large difference between the interactions of the meta‐nitro group and those of meta‐difluoroamino groups. The energy barriers for the C‐N internal rotation of NO₂ group and NF₂ groups are 74.7 kJ/mol and 185.8 kJ/mol for TATB and TATDB, respectively. The large energy barrier for the rotation of the NF₂ group is caused by its stabilization interaction with neighbor amino groups, instead of steric effects. When the number of pairs of amino‐nitro or amino‐difluoroamino groups increases, there are more negative charges on the NO₂/NF₂ groups and on the O/F atoms.     

Full Non-Rigid Group and Symmetry of Dimethyltrichlorophosphorus

In this work, a simple method is described, by means of which it is possible to calculate character tables for the symmetry group of molecules consisting of a number of NH3 groups attached to a rigid framework. The full non-rigid group (f-NRG) of dimethyltrichlorophosphorus with the symmetry group D3h was studied. It has been proven that it is a group of order 216 with 27 conjugacy classes and its character table computed. Finally, the Permutation-lnversion group of this molecule was calculated.     

Separation of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane and 1,3,5‐trinitro‐1,3,5‐ triazacyclohexane by molecularly imprinted solid‐phase extraction

Synthesis of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane and 1,3,5‐trinitro‐1,3,5‐triazacyclohexane by the Bachmann process leads to a mixture of both. The separation of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane and 1,3,5‐trinitro‐1,3,5‐triazacyclohexane from their mixture is difficult because the sizes and physical properties of these homologous compounds are similar. For this purpose, seven molecularly imprinted polymers have been synthesized for each explosive, and a selective solid‐phase extraction procedure has been developed. A molecularly imprinted polymer, synthesized with 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane as the template, methacrylic acid as the monomer and trimethylolpropane trimethacrylate as the cross‐linking agent in a molar ratio of 1:8:8 showed the best separation capability. A packed cartridge containing this polymer can be reused for 23 solid‐phase extraction cycles without repacking, and the total separation capability toward 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane reached 6.81 mg per gram of polymer. 1,3,5‐Trinitro‐1,3,5‐triazacyclohexane was not detected in the separated 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane by high‐performance liquid chromatography and vice versa. This newly developed method had the advantages of high recovery (100%) and purity, environmental friendliness, and room temperature operability. This study showed that some molecularly imprinted polymers that cannot absorb target analytes well in the solvent in which the polymers were polymerized might have high‐binding capacity for the analytes and show imprinting effects in other solvents.     

Hydrogen bonding in polyamino‐polyalcohols: a monohydrated cocrystal of 1,3‐diamino‐5‐azaniumyl‐1,3,5‐trideoxy‐cis‐inositol iodide and 1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol

In the title monohydrated cocrystal, namely 1,3‐diamino‐5‐azaniumyl‐1,3,5‐trideoxy‐cis‐inositol iodide–1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol–water (1/1/1), C₆H₁₆N₃O₃⁺·I⁻·C₆H₁₅N₃O₃·H₂O, the neutral 1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol (taci) molecule and the monoprotonated 1,3‐diamino‐5‐azaniumyl‐1,3,5‐trideoxy‐cis‐inositol cation (Htaci⁺) both adopt a chair conformation, with the three O atoms in axial and the three N atoms in equatorial positions. The cation, but not the neutral taci unit, exhibits intramolecular O—H...O hydrogen bonding. The entire structure is stabilized by a complex three‐dimensional network of intermolecular hydrogen bonds. The neutral taci entities and the Htaci⁺ cations are each aligned into chains along [001]. In these chains, two O—H...N interactions generate a ten‐membered ring as the predominant structural motif. The rings consist of vicinal 2‐amino‐1‐hydroxyethylene units of neighbouring molecules, which are paired via centres of inversion. The chains are interconnected into undulating layers parallel to the ac plane, and the layers are further held together by O—H...N hydrogen bonds and additional interactions with the iodide counter‐anions and solvent water molecules.     

A Conformational Study of Cyclohexane‐1,3,5‐tricarbonitrile Derivatives

Cyclohexane‐1,3,5‐tricarbonitrile reached equilibrium having 1,3‐cis‐1,5‐cis and 1,3‐cis‐1,5‐trans isomers in a ratio of 3:7. The cis, cis‐isomer preferred the conformation with three equatorial cyano groups, where as the cis, trans‐isomer displayed two cyano groups on equatorial positions and another cyano group on axial position. Condensation of cis, cis‐cyclohexane‐1,3,5‐tricarbonitrile with L‐(S)‐valinol by the catalysis of ZnCl₂ in refluxing 1,2‐dichlorobenzene afforded two isomeric cyclohexane‐1,3,5‐trioxazolines in favor of the 1,3‐cis‐1,5‐trans isomer. Metalation of cis, cis‐cyclohexane‐1,3,5‐tricarbonitrile, followed by alkylations with dimethyl sulfate, benzyl bromide or allyl bromide, gave the cor responding trialkylation products with predominance of 1,3‐cis‐1,5‐trans isomers. The cis, trans‐isomer showed two cyano groups on axial positions and another cyano group on equatorial position, where as the cis, cis‐isomer exhibited three axial cyano groups. Treatment of trimethyl cis, cis‐cyclohexane‐1,3,5‐tricarboxylate with lithium diisopropylamide and dimethyl sulfate afforded mainly the trimethyl ester of Kemp's triacid, which showed three axial carboxylate groups. Two competitive factors, i.e. the steric effect of in coming electrophiles and the dipole‐dipole inter actions of the cyano or carboxylate groups, might inter play to give different stereoselectivities in these reaction systems.     

Halogenation of Fluorinated 1,3,5‐Triketones

The behavior of linear and cyclic fluorinated 1,3,5‐triketones and their metal derivatives towards common halogenating agents was examined, and optimal reaction conditions for the straightforward synthesis of mono‐, di‐, and tetrahalogenated products were found (Schemes 1–3). An aromatization through a double HBr elimination from an α,α′‐dibrominated cyclohexanone was shown to be a promising synthetic route to 1,1′‐(2‐hydroxy‐1,3‐phenylene)bis[2,2,2‐trifluoroethanones] (= 2,6‐bis(trifluoroacetyl)phenols; Scheme 4). Additionally, the 1,3,5‐triketones prepared add readily H₂O or alcohols to produce novel bridged 2,6‐dihydroxypyran‐4‐ones (Scheme 2). The structure of the obtained compounds 6a and 7a was confirmed by X‐ray structure analysis.     

Formation of lithium,sodium and potassium complexes with 1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol (taci)

Single crystals of (1,3‐diamino‐5‐azaniumyl‐1,3,5‐trideoxy‐cis‐inositol‐κ³O²,O⁴,O⁶)(1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol‐κ³O²,O⁴,O⁶)lithium(I) diiodide dihydrate, [Li(C₆H₁₆N₃O₃)(C₆H₁₅N₃O₃)]I₂·2H₂O or [Li(Htaci)(taci)]I₂·2H₂O (taci is 1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol), (I), bis(1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol‐κ³O²,O⁴,O⁶)sodium(I) iodide, [Na(C₆H₁₅N₃O₃)₂]I or [Na(taci)₂]I, (II), and bis(1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol‐κ³O²,O⁴,O⁶)potassium(I) iodide, [K(C₆H₁₅N₃O₃)₂]I or [K(taci)₂]I, (III), were grown by diffusion of MeOH into aqueous solutions of the complexes. The structures of the Na and K complexes are isotypic. In all three complexes, the taci ligands adopt a chair conformation with axial hydroxy groups, and the metal cations exhibit exclusive O‐atom coordination. The six O atoms of the resulting MO₆ unit define a centrosymmetric trigonal antiprism with approximate D_3d symmetry. The interligand O...O distances increase significantly in the order Li < Na < K. The structure of (I) exhibits a complex three‐dimensional network of R—NH₂—H...NH₂—R, R—O—H...NH₂—R and R—O—H...O(H)—H...NH₂—R hydrogen bonds. The structures of the Na and K complexes consist of a stack of layers, in which each taci ligand is bonded to three neighbours via pairwise O—H...NH₂ interactions between vicinal HO—CH—CH—NH₂ groups.     

Density functional theory study of high‐pressure effect on crystalline 4,4′,6,6′‐tetra(azido)hydrazo‐1,3,5‐triazine

Periodic density functional theory calculations are performed to study the hydrostatic compression effects on the structure, electronic, and thermodynamic properties of the energetic polyazide 4,4′,6,6′‐tetra(azido)hydrazo‐1,3,5‐triazine (TAHT) in the range of 0?100 GPa. At the ambient pressure, the local density approximation/Ceperley‐Alder exchange‐correlation potential parameterized by Perdew and Zunger relaxed crystal structure compares well with the experimental results. The predicted heat of sublimation is 38.68 kcal/mol, and the evaluated condensed phase of formation (414.04 kcal/mol) approximates to the experimental value. The detonation velocity and detonation pressure for the solid TAHT are calculated to be 7.44 km/s and 23.71 GPa, respectively. When the pressure is exerted less than 35 GPa, the crystal structure and geometric parameters change slightly. However, at 36 GPa, the molecular structure, band structure, and density of states change abnormally because of the azide‐tetrazole transformation that has not been observed in gas phase or polar solvents. The azido group cyclizes to form a five‐membered tetrazole ring that is coplanar with the riazine ring and contributes to a larger conjunction system. As the pressure augments further to 80 GPa, the hydrogen transfer is found and a new covalent bond H2? N9 is formed. In the studied pressure range, the band gap decreases generally except for some breaks due to the molecular transformation and drops to nearly zero at 100 GPa, which means the electronic character of the crystal changes toward a metallic system. An analysis of the electronic structure shows that an applied pressure increases the impact sensitivity of TAHT. © 2012 Wiley Periodicals, Inc.     

Hybrid 4‐Aminoquinoline‐1,3,5‐triazine Derivatives: Design,Synthesis, Characterization,and Antibacterial Evaluation

A series of novel 4‐aminoquinoline 1,3,5‐triazine derivatives were synthesized and characterized by FTIR, ¹H‐NMR, ¹³C‐NMR, MS, and elemental analysis. The antibacterial activities of synthesized compounds were tested against three Gram‐positive bacteria, namely Bacillus subtilis (NCIM‐2063), Bacillus cereus (NCIM‐2156), and Staphylococcus aureus (NCIM‐2079), and four Gram‐negative bacteria, namely Proteus vulgaris (NCIM‐2027), Proteus mirabilis (NCIM‐2241), Escherichia coli (NCIM‐2065), and Pseudomonas aeruginosa (NCIM‐2036), using ciprofloxacin as reference standard drug. Results showed compound 9a and 9e as potent antibacterial agents against all bacterial strains except Bacillus cereus (NCIM‐2156). Copyright © 2014 HeteroCorporation     

1,3,5‐Triiodo‐2,4,6‐trimethylbenzene at 293 K

In the structure of tri­iodo­mesityl­ene (1,3,5‐tri­iodo‐2,4,6‐tri­methyl­benzene), C₉H₉I₃, at 293 K, the benzene ring is found to be significantly distorted from ideal D_6h symmetry; the average endocyclic angles facing the I atoms and the methyl groups are 123.8 (3) and 116.2 (3)°, respectively. The angle between the normal to the molecular plane and the normal to the (100) plane is 5.1°. No disorder was detected at 293 K. The thermal motion was investigated by a rigid‐body motion tensor analysis. Intra‐ and intermolecular contacts are described and topological differences compared with the isomorphous compounds tri­chloro­mesityl­ene and tri­bromo­mesityl­ene are discussed.     

Synthesis and Supramolecular Assemblies of Tripodal 1,3,5‐Tris(phenoxymethyl)‐2,4,6‐triethylbenzene Analogues

Tripodal 1,3,5‐tris(phenoxymethyl)‐2,4,6‐triethylbenzene analogues have been synthesized and structurally characterized by IR, ¹H NMR and ¹³C NMR spectroscopy and HRMS, and additionally, the single crystal structures of compounds bearing ortho‐ ( 7 ), meta‐ ( 9 ) and para‐hydroxymethyl ( 11 ) functions have been determined by X‐ray diffraction analysis. The structural study revealed that compounds 7 , 9 , and 11 do not adopt the expected 1,3,5‐alternate conformation in the solid state. The packing diagrams of compounds 7 , 9 , and 11 revealed that six hydrophilic hydroxymethyl groups from six individual molecules ( 7 , 9 and 11 ) were arranged in close contact via intermolecular hydrogen‐bond interactions. For compounds 7 and 9 , the six hydroxyl groups formed a distorted hexagonal ring; however, formation of such a hexagonal ring was not clear in the case of compound 11 . Compounds 9 and 11 were found to form hydrophobic cavities via intermolecular hydrogen‐bond interactions in the solid state, and the cavities were occupied by two ethyl groups from the two cavity‐forming molecules.     

Comparative theoretical synthesis of high‐energy density materials 2,4,6‐trinitro‐1,3,5‐triazine

In this study, the optimal synthetic route for 2,4,6‐trinitro‐1,3,5‐triazine (TNTA) was investigated. The synthesis of TNTA was performed using cyanamide (H₂NCN) as a starting material. In the first stage, a radical addition reaction was used to generate melamine, which is the precursor of TNTA. In addition, a gaseous nitration reaction using nitrogen dioxide radicals (^?NO₂) as the nitration agent was used to gradually induce radical substitutions to convert dicyandiamide (H₂NCN)₂ to melamine (H₂NCN)₃. Additional nitration steps lead to triaminocyanide and, ultimately, TNTA. In addition, nitryl cyanide (O₂NCN) was also tested as a starting material for radical addition to generate dinitryl cyanide (O₂NCN)₂, trinitryl cyanide (O₂NCN)₃, and, finally, TNTA. The activation energy barrier in each of the reaction steps as well as the various synthetic routes were compared to provide insight into the design of more feasible routes for the synthesis of TNTA. © 2014 Wiley Periodicals, Inc.     

Protonierung des 1,1,3,3,5,5‐Hexakis(dimethylamino)λ5‐[1,3,5]triphosphinins. Cyclotrimethylentriphosphinsäure. NMR‐Daten,Kristallstrukturen und quantenchemische Rechnungen

Protonation of 1,1,3,3,5,5‐Hexakis(dimethylamino)‐λ⁵‐[1,3,5]triphosphinine. Cyclotrimethylenetriphosphinic Acid. NMR Data, Crystal Structures, and Quantum Chemical Calculations Preparation of 1,1,3,3,5,5‐hexakis(dimethylamino)‐1,2‐dihydro‐3λ⁵,5λ⁵‐[1,3,5]triphosphininium‐tetrafluoroborate ( 3 ) und 1,1,3,3,5,5‐hexakis(dimethylamino)‐λ⁵‐[1,3,5]triphosphinanetriium‐tris(tetrafluoroborate) ( 4 ) from 1,1,3,3,5,5‐hexakis(dimethylamino)‐1λ⁵,3λ⁵,5λ⁵‐triphosphinine 1 and HBF₄ · O(C₂H₅)₂ are described. The structures of 3 und 4 are elucidated by n. m. r. and X‐ray structural analyses. By hydrolysis of 4 with conc. hydrochloric acid 1,3,5‐trioxo‐1λ⁵,3λ⁵,5λ⁵‐[1,3,5]triphosphinane‐1,3,5‐triol (cyclotrimethylene‐triphosphinic acid) ( 8 ) is formed. Neutralisation with NaOH yields its sodium salt 9 . 8 and 9 are characterized by their n. m. r. spectra. Quantum chemical calculations have been investigated for the compounds 1 ′– 4 ′ and the trianion 9 . The systems 1 ′– 4 ′ are distinguished from 1 – 4 by the size of the ligands at phosphorus which is reduced from N(CH₃)₂ to NH₂, respectively. The aims of the calculations are to elucidate hybridisations and molecular structures, Lewis or resonance structures, electronic charge distributions and NMR chemical shifts.     

Synthesis and crystallographic studies of two new 1,3,5‐triazines

The synthesis and characterization of two new 1,3,5‐triazines containing 2‐(aminomethyl)‐1H‐benzimidazole hydrochloride as a substituent are reported, namely, 2‐{[(4,6‐dichloro‐1,3,5‐triazin‐2‐yl)amino]methyl}‐1H‐benzimidazol‐3‐ium chloride, C₁₁H₉Cl₂N₆⁺·Cl^? ( 1 ), and bis(2,2′‐{[(6‐chloro‐1,3,5‐triazine‐2,4‐diyl)bis(azanediyl)]bis(methylene)}bis(1H‐benzimidazol‐3‐ium)) tetrachloride heptahydrate, 2C₁₉H₁₈ClN₉²⁺·4Cl^?·7H₂O ( 2 ). Both salts were characterized using single‐crystal X‐ray diffraction analysis and IR spectroscopy. Moreover, the NMR (¹H and ¹³C) spectra of 1 were obtained. Salts 1 and 2 have triclinic symmetry (space group P) and their supramolecular structures are stabilized by hydrogen bonding and offset π–π interactions. In hydrated salt 2 , the noncovalent interactions yield pseudo‐nanotubes filled with chloride anions and water molecules, which were modelled in the refinement with substitutional and positional disorder.     

29Si NMR Investigation of Si‐alkylsubstituted 1,3,5‐Trisilacyclohexanes

²⁹Si NMR spectra of 29 Si‐alkylsubstituted derivatives of 1,3,5‐trisilacyclohexanes have been recorded and analyzed. A systematic preparation of alkyl derivatives with mixed substituents made it possible to evaluate substituent‐induced chemical shift (SCS) values for the ring silicon atoms in α and γ position. It is found that the equatorial α‐effect increases in the order Me < Et < i‐Pr < t‐Bu. For the alkyl groups Me, Et, and i‐Pr the axial α‐effect is similar in magnitude to the α_e‐effect. Axial SCS values for the t‐Bu group are not accessible because chair conformations with an axial t‐Bu group are energetically unfavourable and escape into a twisted boat form. The observed γ‐effects exhibit the γ_gauche‐effect for axial substituents as known from compounds with a pure carbon framework.     

Construction and photoluminescence properties of a three‐dimensional ZnII coordination network based on naphthalene‐1,4‐dicarboxylic acid and 1,6‐bis(pyridin‐3‐yl)‐1,3,5‐hexatriene

In recent years, coordination polymers constructed from multidentate carboxylate and pyridyl ligands have attracted much attention because these ligands can adopt a rich variety of coordination modes and thus lead to the formation of crystalline products with intriguing structures and interesting properties. A new coordination polymer, namely poly[[μ₂‐1,6‐bis(pyridin‐3‐yl)‐1,3,5‐hexatriene‐κ²N:N′](μ₃‐naphthalene‐1,4‐dicarboxylato‐κ⁴O¹,O^1′:O⁴:O^4′)zinc(II)], [Zn(C₁₂H₆O₄)(C₁₆H₁₄N₂)]_n, has been prepared by the self‐assembly of Zn(NO₃)₂·6H₂O, naphthalene‐1,4‐dicarboxylic acid (1,4‐H₂ndc) and 1,6‐bis(pyridin‐3‐yl)‐1,3,5‐hexatriene (3,3′‐bphte) under hydrothermal conditions. The title compound has been structurally characterized by IR spectroscopy, elemental analysis, powder X‐ray diffraction and single‐crystal X‐ray diffraction analysis. Each Zn^II ion is six‐coordinated by four O atoms from three 1,4‐ndc²⁻ ligands and by two N atoms from two 3,3′‐bphte ligands, forming a distorted octahedral ZnO₄N₂ coordination geometry. Pairs of Zn^II ions are linked by 1,4‐ndc²⁻ ligands, leading to the formation of a two‐dimensional square lattice ( sql ) layer extending in the ab plane. In the crystal, adjacent layers are further connected by 3,3′‐bphte bridges, generating a three‐dimensional architecture. From a topological viewpoint, if each dinuclear zinc unit is considered as a 6‐connected node and the 1,4‐ndc²⁻ and 3,3′‐bphte ligands are regarded as linkers, the structure can be simplified as a unique three‐dimensional 6‐connected framework with the point symbol 4⁴6¹⁰8. The thermal stability and solid‐state photoluminescence properties have also been investigated.