Synthesis,Crystal Structure,Photophysical and Electrochemical Properties of rac‐6,13‐Dihydro‐6,13‐methanopentacene

The title compound, rac‐6,13‐dihydro‐6,13‐methanopentacene ( 1 ), has been synthesized and characterized by elemental analysis, FT‐IR, ¹H NMR, UV‐Vis, HRMS spectra, cyclic voltammetry and single‐crystal X‐ray diffraction. The crystal belongs to orthorhombic, space group P2₁2₁2₁, with Z = 4 and cell dimensions a = 6.0185(4), b = 8.1914(6), c = 31.4080(19) Å. In the crystal structure, two types of intermolecular C–H···π hydrogen bonds are observed, and further stabilize the crystal structure. Its photophysical and electrochemical properties and complementary density functional theory (DFT) calculations are reported.     

Structural Characterization and Enzymatic Degradation of α‐, β‐, and γ‐Crystalline Forms for Poly(β‐propiolactone)

A structural comparison of three different crystalline forms of poly(β‐propiolactone) (PPL) was carried out by wide‐angle X‐ray diffraction, Fourier‐transform infrared spectroscopy, and differential scanning calorimetry. The α‐form in a hot‐drawn and annealed film represents a 2₁ helix conformation. The β‐form in a cold‐drawn and annealed film represents a planar zigzag conformation. The γ‐form in an oriented sedimented mat of solution‐grown chain‐folded lamellar crystals also implies a planar zigzag conformation. The solution‐cast film depicts similar outlines with the γ‐form in lamellar crystals in all the experimental measurements, suggesting that the molecular chain in the solution‐cast film has a planar zigzag conformation. While elongation at break decreased, tensile strength and Young's modulus increased with an increase in the crystallinity, independent of the crystalline forms. The influence of the enzymatic degradation of these crystal structures has been investigated by using an extracellular PHB depolymerase purified from Ralstonia pickettii T1. The rate of degradation was in the order of β‐form > α‐form > solution‐cast (γ‐form) film, and the different surface morphologies after partial enzymatic degradation were observed in scanning electron micrographs. It is suggested that the crystal structure is one of the important factors for determining the rate of degradation together with crystallinity.

Enzymatic degradation profiles of poly(β‐propiolactone) films.     

Spectroscopic,Thermal, and Structural Studies of Two New Co‐Crystals of [4,4′‐Bithiazole]‐2,2′‐diamine

Two new 2 : 1 co‐crystals based on [4,4′‐bithiazole]‐2,2′‐diamine (=2,2′‐diamino‐4,4′‐bithiazole (DABTZ)) with 2,2′‐bipyridine (bipy) and benzo‐18‐crown‐6 (bk) were synthesized by slow‐evaporation method in MeOH. These co‐crystals were characterized by means of elemental analysis, and IR, and ¹H‐ and ¹³C‐NMR spectroscopy. Also, thermal analyses under air atmosphere and X‐ray crystallography have been performed on these structures. X‐Ray single‐crystal analyses revealed that these networks contain large vacant voids. These structures, [(DABTZ)₂(bipy)] and [(DABTZ)₂(bk)(MeOH)], crystallized in monoclinic and triclinic forms with space groups of P2₁/c and P , respectively. The self‐assembly of these compounds in the solid state is likely caused by both H‐bonding and π? π stacking.     

Experimental and Theoretical Studies of 4‐(1‐benzyl‐5‐methyl‐1H‐1,2,3‐triazol‐4‐yl)‐6‐(2,4‐dichlorophenyl)pyrimidin‐2‐amine: A Potential Antibacterial Agent

The title compound ( 1 ), 4‐(1‐benzyl‐5‐methyl‐1H‐1,2,3‐triazol‐4‐yl)‐6‐(2,4‐dichlorophenyl)pyrimidin‐2‐amine (C₂₀H₁₆Cl₂N₆), was synthesized and structurally characterized by elemental analysis, ¹H NMR and ¹³C NMR and single crystal X‐ray diffraction. The compound crystallizes as a colourless needle shaped in the triclinic system, space group P‐1 with cell constants: a = 10.7557(11) Å, b = 12.7078(17) Å, c = 15.511(2) Å, α = 68.029(4)0, β = 86.637(5)0, γ = 87.869(4)0; V = 1962.4 (4) ų, Z = 4. There are two structurally similar but crystallographically independent molecules (A and B) in the asymmetric unit of the title compound, which is linked via N‐H…Cl hydrogen bond. An intramolecular C‐H…N hydrogen also occurs in each molecule. In the crystal, each of independent molecules forms a centrosymmetric dimer with an R²₂(8) ring motifs through a pair of N‐H…N hydrogen bonds. These dimers are further connected by intermolecular N‐H…Cl and C‐H…Cl hydrogen bonds, forming an infinite two dimensional supramolecular network lying parallel to the [010] plane. The molecular geometry was also optimized using density functional theory (DFT/B3LYP) method with the 6‐311G (d, p) basis set and compared with the experimental data. Mulliken population analyses on atomic charges, HOMO‐LUMO energy levels, Molecular electrostatic potential and chemical reactivity of the title compound were investigated by theoretical calculations. The thermo dynamical properties of the title compound at different temperature have been calculated and corresponding relations between the properties and temperature have also been obtained. The in vitro antibacterial activity has been screened against Gram‐positive (Bacillus cerus and Staphylococcus epidermidis) and Gram‐Negative (Escherichia coli, Acinetobacter baumannii and Proteus vulgaris). The results revealed that the compound exhibited good to moderate antibacterial activity.     

Co‐MOFs Containing Flexible α,ω‐Alkane‐dicarboxylates and Bis(imidazole) Ligands: Synthesis,Structure, and Properties

Three structurally related flexible bis(imidazole) ligands reacted with Co(NO₃)₂ · 6H₂O and succinic acid (L₁) to yield three new metal‐organic frameworks {[Co(L₁)(L₂)] · (H₂O)}_n ( 1 ) [L₂ = 2‐bis(imidazol‐1‐yl)ethane], {[Co(L₁)(L₃)](H₂O)}_n ( 2 ) [L₃ = 1,4‐bis(imidazol‐1‐yl) butane], and {[Co(L₁)(L₄)] · (H₂O)}_n ( 3 ) [L₄ = 1,4‐bis(2‐methyl‐imidazol‐1‐yl)butane], respectively. These complexes were synthesized under solvothermal conditions and characterized by elemental analysis, IR spectroscopy, single‐crystal and powder X‐ray diffraction, as well as thermal analyses. Interestingly, the ligands in these complexes exhibit different conformations and further cause three different configurations. Complex 1 shows a three‐dimensional (3D) framework, which is connected by two‐dimensional (2D) layer structures through hydrogen bonds. Complex 2 is a diamond structure with threefold interpenetration. Complex 3 is a 3D framework linked by hydrogen bonds like complex 1 .     

Structures of X 34‐nylons in chain‐folded lamellae and gel‐spun fibers

Structural studies and morphological features of a new family of linear, aliphatic even–even, X 34‐nylons, with X = 2, 4, 6, 8, 10, and 12, are investigated with X‐ray diffraction and electron microscopy. Solution‐grown crystals were obtained by isothermal crystallization from N,N‐dimethylformamide solutions. The thickness of lamellar‐like crystals was orders of magnitude less than the chain lengths of the polymer samples used, implying that the chains fold to form chain‐folded lamellae. The results bear a close resemblance, with the noticeable exception of 2 34‐nylon, to those reported for nylon 6 6 and other even–even nylon chain‐folded lamellar crystals. The basic structure of the straight‐stem lamellar core is similar to that of the classic nylon 6 6 triclinic α structure, and the chains tilt ≈42° relative to the lamellar normal. In the case of 2 34‐nylon, the structure resembles the 2 Y nylon series, and the chain tilt angle reduces to 36.6°. These combined results suggest that, even with a relatively low frequency of amide units along the backbone of these molecules, hydrogen bonding is still the dominant element in controlling the behavior, structure, and properties of these polymers. In addition, gels were prepared in concentrated sulfuric acid, and gel‐spun fibers were studied using X‐ray diffraction. The data are interpreted in terms of a modified nylon triclinic α structure that bears a resemblance to the structure of even–even nylons at elevated temperatures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2685–2692, 2002     

1,3‐Dihydro‐1‐hydroxy‐3‐morpholin‐4‐yl‐2,1‐benzoxaborole: product of the reaction of o‐formylphenylboronic acid with morpholine

o‐Formylphenylboronic acid reacts with morpholine to form 1,3‐dihydro‐1‐hydroxy‐3‐morpholin‐4‐yl‐2,1‐benzoxaborole. The typical hydrogen‐bonded dimer motif with a planar benzoxaborole fragment has been obtained in the solid state. Copyright © 2005 John Wiley & Sons, Ltd.     

Structures of N—（2,3,4,6—Tetra—O—acetyl—β—D—glycosyl） thiocarbamic Benzoyl Hydrazine

The crystal structure of N-(2,3,4,6-tetra-O-acetyl-β-D-gly-cosyl)-thiocarbamic benzoyl hydrazine(C22H27N3O9S) was determined by X-ray diffracton method.The hexopyranosyl ring adopts a chair conformation.All the ring substituents are in the equatorial positions.The acetoxyl-methyl group is in synclinal conformation.The S atom is in synperiplanar conformation while the benzoyl hydrazine moiety is anti-periplanar.The thiocarbamic moiety is almost companar with the benzoyl hydrazine group.There are two intramolecular hydrogen bonds and one intermolecular hydrogen bond for each molecule in the crystal structure.The molecules form a network structure through intermolecular hydrogen bonds.     

Crystallographic report: Crystal structure of tris(2,6‐di‐tert‐butyl‐4‐methylphenolato‐O) (tetrahydrofuran‐O) erbium toluene solvate

A low‐coordinate aryloxo erbium complex, [(ArO)₃Er(THF)](MePh), has been synthesized by the reaction of anhydrous ErCl₃ with three equivalents of NaOAr in tetrahydrofuran. The central erbium atom is coordinated by three oxygen atoms of the aryloxo ligands and one oxygen atom of the tetrahydrofuran molecule, resulting in a distorted tetrahedron. Copyright © 2004 John Wiley & Sons, Ltd.     

Crystal Structure and Spectroscopic Properties of Bis[trans‐dichlorobis(2,2‐dimethylpropane‐1,3‐diamine)chromium(III)] Tetrachlorozincate

The structure of trans‐[Cr(Me₂tn)₂Cl₂]₂ZnCl₄ (Me₂tn = 2,2‐dimethylpropane‐1,3‐diamine) was determined by a single‐crystal X‐ray diffraction study at 173 K. The analysis reveals that there are three crystallographically independent chromium(III) complex cations in the title compound. The chromium(III) atoms are coordinated by four nitrogen atoms of Me₂tn and two chlorine atoms in a trans arrangement, displaying a distorted octahedral geometry. The two six‐membered chelate rings in three complex cations are oriented in an anti chair–chair conformation with respect to each other. The Cr–N and Cr–Cl bond lengths average 2.0862(2) and 2.3112(6) Å, respectively. The ZnCl₄^2– have slightly distorted tetrahedral arrangement with Zn–Cl lengths and the Cl–Zn–Cl angles are influenced by hydrogen bonding. The resolved absorption maxima in the electronic d–d spectrum were fitted with a secular determinant for a quartet energy state of the d³ configuration in a tetragonal field. It is confirmed that the nitrogen atoms of the Me₂tn ligand are strong σ donors, but the chloro ligands have weak σ‐ and π donor properties toward the chromium(III) ion.     

Synthesis and structural characterization of syndiotactic trans‐1,2 and cis‐1,2 polyhexadienes

The (E) isomer in mixtures of (E) and (Z) 1,3‐hexadiene was polymerized with the system CoCl₂(PⁱPrPh₂)₂‐MAO, a highly active and stereospecific catalyst for the preparation of 1,2 syndiotactic polybutadiene. A new crystalline polymer with a melting point of 109 °C was obtained. The polymer was characterized by IR, NMR (¹³C, ¹H in solution and ¹³C in the solid‐state), X‐ray diffraction, DSC, GPC and it was found to have a trans‐1,2 syndiotactic structure with a 5.18 ± 0.04 Å fiber periodicity. Since only the (E) isomer was polymerized, at the end of the reaction we were able to separate the (Z) isomer, which was ultimately polymerized with CpTiCl₃‐MAO at low temperature, obtaining a low molecular weight, stereoregular polymer that, characterized by IR and NMR methods, was found to exhibit a cis‐1,2 syndiotactic structure, never reported before. Molecular mechanics calculations were carried out on the trans‐1,2 syndiotactic polymer and structural models consistent with the X‐ray diffraction data are proposed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5339–5353, 2007     

Synthesis,Crystal Structure,and Characterization of a Novel Metallo‐Organically‐Templated Pentaborate with Mixed Ligands

A novel metallo‐organically templated pentaborate with layered framework, [Cd(TETA)(C₂H₃O₂)][B₅O₆(OH)₄] ( 1 ) (TETA = triethylenetramine), was synthesized under mild solvothermal conditions. The structure was determined by single‐crystal X‐ray diffraction and further characterized by FT‐IR spectroscopy, elemental analysis, thermogravimetric analysis, and photoluminescence spectroscopy. The structure consists of an isolated polyborate anion [B₅O₆(OH)₄]^– and the cadmium complex cation of [Cd(TETA)(C₂H₃O₂)]⁺, which contains both organic amine and organic acid ligands. The [B₅O₆(OH)₄]^– units are connected together by hydrogen bonds, and a 2D sheet‐like framework with rectangle‐like 12‐membered boron rings are formed. The [Cd(TETA)(C₂H₃O₂)]⁺ complex cations are located in the free space between the layers and connect the adjacent borate layers through hydrogen bonds to form a three‐dimensional supramolecular network. The luminescent properties of the compound were studied for the first time in the series of metallo‐organically‐templated pentaborates, and a blue luminescence occurs with an emission maximum at 468 nm upon excitation at 397 nm.     

New Phases in the Lithiumnitridovanadate System — The Solid Solution Li7‐2xMgx[VN4] with 0 ≤ x ≤ 1

Solid solution phases Li_7‐2xMg_x[VN₄] (0 < x ≤ 1) with varying Mg‐content are obtained as yellow microcrystalline powders from heat treatment of mixtures of VN, Li₃N and Mg₃N₂ or from mixtures of Li₇[VN₄] and Mg₃N₂ at 1370 K in N₂ atmosphere at ambient pressure. At substitution parameter values of x > 0.5 a subsequent distortion from the ideal cubic unit cell to an orthorhombic unit cell is observed. The crystal structure of Li_7‐2xMg_x[VN₄] with x ≈ 1 was refined from neutron and X‐ray powder diffraction data (space group Pbca, No. 61, a = 963.03(3) pm, b = 958.44(3) pm, c = 951.93(2) pm, neutron pattern 14° — 156° 2θ, step non‐linear ≈ 0.0782° 2θ, No. of measured points 1816, R_p = 0.089, R_wp = 0.115, R_Bragg = 0.155, R_F = 0.114; X‐ray pattern 10° — 98° 2θ, step 0.005° 2θ, No. of measured points 17600, R_p = 0.028, R_wp = 0.045, R_Bragg = 0.113, R_F = 0.133, structure variables: 45). The crystal structure resembles a Li₂O type superstructure with the atomic arrangement of β‐Li₇[VN₄] and with two crystallographic Li‐sites each substituted by Mg with statistical occupation factors of 0.5. Chemical analyses prove the composition and XAS spectroscopy at the V K‐edge support the +5 oxidation state assignment for vanadium. XAS data also support the tetrahedral coordination of vanadium by N as indicated by the structure refinements.     

Preparation and structural analysis of (±)‐cis‐ethyl 2‐sulfanylidenedecahydro‐1,6‐naphthyridine‐6‐carboxylate and (±)‐trans‐ethyl 2‐oxooctahydro‐1H‐pyrrolo[3,2‐c]pyridine‐5‐carboxylate

Bicycle ring closure on a mixture of (4aS,8aR)‐ and (4aR,8aS)‐ethyl 2‐oxodecahydro‐1,6‐naphthyridine‐6‐carboxylate, followed by conversion of the separated cis and trans isomers to the corresponding thioamide derivatives, gave (4aSR,8aRS)‐ethyl 2‐sulfanylidenedecahydro‐1,6‐naphthyridine‐6‐carboxylate, C₁₁H₁₈N₂O₂S. Structural analysis of this thioamide revealed a structure with two crystallographically independent conformers per asymmetric unit (Z′ = 2). The reciprocal bicycle ring closure on (3aRS,7aRS)‐ethyl 2‐oxooctahydro‐1H‐pyrrolo[3,2‐c]pyridine‐5‐carboxylate, C₁₀H₁₆N₂O₃, was also accomplished in good overall yield. Here the five‐membered ring is disordered over two positions, so that both enantiomers are represented in the asymmetric unit. The compounds act as key intermediates towards the synthesis of potential new polycyclic medicinal chemical structures.     

Synthesis and Comprehensive Characterization of Hydrated Alkaline Earth Metal Salts of 5‐Amino‐1H‐tetrazole

Hydrated alkaline earth metal salts of 5‐amino‐1H‐tetrazole ( B ) were synthesized by reaction of B with a suitable metal hydroxide in water. All compounds were fully characterized by analytical (elemental analysis and mass spectrometry) and spectroscopic (IR, Raman, ¹H and ¹³C NMR) methods. Additionally, the crystal structures of the magnesium [ 1· 4H₂O: triclinic, P$\bar {1}$ , a = 5.940(1) Å, b = 7.326(1) Å,c = 7.383(1) Å, α = 106.10(1)°, β = 106.51(1)°, γ = 111.85(1)°, V = 258.0(1) ų], calcium [ 2· 6H₂O: monoclinic, P2₁/m, a = 6.904(1) Å,b = 6.828(1) Å, c = 10.952(2) Å, β = 94.50(2)°, V = 514.6(1) ų], and strontium [ 3· 6H₂O: orthorhombic, Cmcm, a = 6.987(1) Å, b = 28.394(2) Å, c = 7.007(1) Å, V = 1390.3(2) ų] were determined by low temperature X‐ray diffraction. Additionally, the (gas phase) structure of the 5‐amino‐1H‐tetrazole anion ([ B ]^–) was also studied by natural bond orbital (NBO) analysis [B3LYP/6‐31+G(d,p)]. Lastly, standard tests were used to determine the sensitivity towards impact, friction, and electrostatic discharge of the compounds and the thermal stability was assessed by differential scanning calorimetry (DSC) analysis.     

Activation of Molecular Hydrogen by Bis(η5,η1‐pentafulvene)‐titanium Complexes – Efficient Formation of Titanium(III)hydrides

The synthesis and crystal structures of two dinuclear titanocene hydride complexes are reported. Both complexes, namely bis(η⁵‐(di‐para‐tolylmethyl)cyclopentadienyl)titanium hydride dimer, [(η⁵‐C₂₀H₁₉)₂Ti(μ‐H)]₂ ( 2a ), and bis(η⁵‐2‐adamantylcyclopentadienyl)‐titanium hydride dimer, [(η⁵‐C₁₅H₁₉)₂Ti(μ‐H)]₂ ( 2b ), are formed via activation of molecular hydrogen by the corresponding bis(η⁵,η¹‐pentafulvene)titanium complexes 1a and 1b at ambient temperatures and pressures in high yields. The hydride complexes 2a and 2b exhibit planar [Ti₂H₂] cores and, as a result of the heterolytic cleavage of molecular hydrogen, substituted Cp Ligands were formed during the reaction.     

Synthesis and X‐ray single‐crystal structure study of 5,5′‐bis(silyl)‐functionalized 3,3′‐dibromo‐2,2′‐dithiophenes

A high‐yield synthesis toward 5,5′‐bis(silyl)‐functionalized 3,3′‐dibromo‐2,2′‐dithiophenes with very efficient work‐up procedure is presented. The molecular structures of two silyl functionalized dibromo‐dithiophenes in the solid state have been determined to investigate the structural influences of different functional groups on the degree of π‐conjugation within the dithiophene moieties, as well as their packing properties. The planar alignment of the tert‐butyldimethylsilyl‐functionalized dibromo‐dithiophene shows a significantly higher degree of conjugation of the π‐system with a more favorable molecular packing than the skewed arrangement of the triisopropylsilyl‐substituted species. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis,Characterization and Crystal Structure of Some Novel 1‐(3,5‐Dimethyl‐1H‐pyrazol‐1‐yl)‐3‐(substituted anilino)propan‐1‐ones

Michael addition of some substituted anilines to methyl acrylate in acidic medium afforded the methyl 3-(substituted anilino)propionates (1a—1i), which on treatment with hydrazine hydrate in methanol were converted into corresponding 3-(substituted anilino) propionohydrazides (2a—2i) in good yields. Microwave irradiation of the latter with pentane-2,4-dione afforded 1-(3,5-dimethyl-1H-pyrazol-1-yl)-3-(substituted anilino)propan-1-ones (3a—3i) under solventless conditions. The structures were confirmed by spectroscopic data, elemental analyses and in case of the 3h by single crystal X-ray diffraction data.