1‐(2‐Cyclohex‐2‐enylpropionyl)‐3‐methylurea, 2‐ethyl‐5‐methylhexanamide and 2‐ethylpentanamide: three products of barbiturate decomposition

The three title compounds were obtained by reactions which mimic, with more extreme conditions, the in vivo metabolism of barbiturates. 1‐(2‐Cyclohex‐2‐enylpropionyl)‐3‐methylurea, C₁₁H₁₈N₂O₂, (I), and 2‐ethylpentanamide, C₈H₁₇NO, (III), both crystallize with two unique molecules in the asymmetric unit; in the case of (III), one unique molecule exhibits whole‐molecule disorder. 2‐Ethyl‐5‐methylhexanamide, C₉H₁₉NO, (II), crystallizes as a fully ordered molecule with Z′ = 1. In the crystal structures, three different hydrogen‐bonding motifs are observed: in (I) a combination of R₂²(4) and R₂²(8) motifs, and in (II) and (III) a combination of R₄²(8) and R₂²(8) motifs. In all three structures, one‐dimensional ribbons are formed by N—H...O hydrogen‐bonding interactions.     

An experimental and theoretical approach to the molecular structure of 3‐{[4‐(3‐Methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐hydrazono}‐1,3‐dihydro‐ indol‐2‐one

The title molecule, 3‐{[4‐(3‐methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐hydrazono}‐1,3‐dihydro‐indol‐2‐one (C₂₂H₂₀N₄O₁S₁), was prepared and characterized by ¹H NMR, ¹³C NMR, IR, UV–visible, and single‐crystal X‐ray diffraction. The compound crystallizes in the monoclinic space group P21 with a = 8.3401(5), b = 5.6976(3), c = 20.8155(14) Å, and β = 95.144(5)°. Molecular geometry from X‐ray experiment and vibrational frequencies of the title compound in the ground state has been calculated using the Hartree–Fock with 6‐31G(d, p) and density functional method (B3LYP) with 6‐31G(d, p) and 6‐311G(d, p) basis sets, and compared with the experimental data. The calculated results show that optimized geometries can well reproduce the crystal structural parameters, and the theoretical vibrational frequencies values show good agreement with experimental data. Density functional theory calculations of the title compound and thermodynamic properties were performed at B3LYP/6‐31G(d, p) level of theory. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Fragmentation Mechanism of Trans—α—Aryl—β—enamino Esters

Electron impact-induced fragmentation mechanism of Trans-α-Aryl-β-enamino esters were investigated using mass-analyzed ion kinetic energy (MIKE) spectrometry and high resolution accurate mass data It was found that the main characteristic fragmentations of compounds studied were:an odd electron ion M^ -EtOH was formed by losing a neutral molecule of ethanol;and the skeletal rearrangements took place;and the ring opening reaction happened after losing a carbon monoxide;and the typical McLafferty rearrangement underwent in ester group.The cycliztion reation caused by losing neutral molecule of TsNH2 due to the ortho-effects of substituted group of gromatic ring was also observed.     

Crystal structures of the anhydrous and two solvated forms of methyl 4‐(4‐fluorophenyl)‐6‐methyl‐2‐oxo‐1,2,3,4‐tetrahydropyrimidine‐5‐carboxylate

Methyl 4‐(4‐fluorophenyl)‐6‐methyl‐2‐oxo‐1,2,3,4‐tetrahydropyrimidine‐5‐carboxylate, ( I ), was found to exhibit solvatomorphism. The compound was prepared using a classic Biginelli reaction under mild conditions, without using catalysts and in a solvent‐free environment. Single crystals of two solvatomorphs and one anhydrous form of ( I ) were obtained through various crystallization methods. The anhydrous form, C₁₃H₁₃FN₂O₃, was found to crystallize in the monoclinic space group C2/c. It showed one molecule in the asymmetric unit. The solvatomorph with included carbon tetrachloride, C₁₃H₁₃FN₂O₃·0.25CCl₄, was found to crystallize in the monoclinic space group P2/n. The asymmetric unit revealed two molecules of ( I ) and one disordered carbon tetrachloride solvent molecule that lies on a twofold axis. A solvatomorph including ethyl acetate, C₁₃H₁₃FN₂O₃·0.5C₄H₈O₂, was found to crystallize in the triclinic space group P with one molecule of ( I ) and one solvent molecule on an inversion centre in the asymmetric unit. The solvent molecules in the solvatomorphs were found to be disordered, with a unique case of crystallographically induced disorder in ( I ) crystallized with ethyl acetate. Hydrogen‐bonding interactions, for example, N—H…O=C, C—H…O=C, C—H…F and C—H…π, contribute to the crystal packing with the formation of a characteristic dimer through N—H…O=C interactions in all three forms. The solvatomorphs display additional interactions, such as C—F…N and C—Cl…π, which are responsible for their molecular arrangement. The thermal properties of the forms were analysed through differential scanning calorimetry (DSC), hot stage microscopy (HSM) and thermogravimetric analysis (TGA) experiments.     

2‐Ethyl‐1‐[5‐(4‐methylphenyl)pyrazol‐3‐yl]‐3‐(thiophene‐2‐carbonyl)isothiourea: molecular ribbons containing three types of hydrogen‐bonded ring

The title compound, C₁₈H₁₈N₄OS₂, was prepared by reaction of S,S‐diethyl 2‐thenoylimidodithiocarbonate with 5‐amino‐3‐(4‐methylphenyl)‐1H‐pyrazole using microwave irradiation under solvent‐free conditions. In the molecule, the thiophene unit is disordered over two sets of atomic sites, with occupancies of 0.814 (4) and 0.186 (4), and the bonded distances provide evidence for polarization in the acylthiourea fragment and for aromatic type delocalization in the pyrazole ring. An intramolecular N—H...O hydrogen bond is present, forming an S(6) motif, and molecules are linked by N—H...O and N—H...N hydrogen bonds to form a ribbon in which centrosymmetric R₂²(4) rings, built from N—H...O hydrogen bonds and flanked by inversion‐related pairs of S(6) rings, alternate with centrosymmetric R₂²(6) rings built from N—H...N hydrogen bonds.     

Absolute structure of the chiral pyrrolidine derivative (2S)‐methyl (Z)‐5‐(2‐tert‐butoxy‐1‐cyano‐2‐oxoethylidene)pyrrolidine‐2‐carboxylate,a compound with low resonant scattering

The enantiopure monopyrrolidine derivative (2S)‐methyl (Z)‐5‐(2‐tert‐butoxy‐1‐cyano‐2‐oxoethylidene)pyrrolidine‐2‐carboxylate, C₁₃H₁₈N₂O₄, ( 1 ), represents a potential ligand and an attractive intermediate for the synthesis of chiral metal complexes. At the molecular level, the compound features an intramolecular N—H…O hydrogen bond; neighbouring molecules interact via N—H…N contacts to form chains along [100]. Due to its elemental composition, resonant scattering of the target compound is entirely insignificant for diffraction experiments with Mo Kα and small even for Cu Kα radiation. A preliminary study with the harder radiation type confirmed the chiral space group and the suitability of the single crystal chosen; as expected, the results concerning the absolute structure remained completely inconclusive. A second data collection with the longer wavelength gave satisfactory quality indicators for the correct handedness of the molecule, albeit with high standard uncertainties. The absolute configuration has been assessed independently: CD spectra for both enantiomers of the target molecule were calculated and the spectrum for the S‐configured stereoisomer was in agreement with the experiment. The Cotton effect of ( 1 ) may be ascribed to π–π* transitions from HOMO to LUMO and from HOMO to LUMO+1. As both independent techniques agree with respect to the handedness of the target molecule, the absolute structure may be assigned with a high degree of confidence.     

Quantum‐chemical,IR, NMR,and X‐ray diffraction studies on 2‐(4‐chlorophenyl)‐1‐methyl‐ 1H‐benzo[d]imidazole

The title molecule, 2‐(4‐chlorophenyl)‐1‐methyl‐1H‐benzo[d]imidazole (C₁₄H₁₁ClN₂), was prepared and characterized by ¹H NMR, ¹³C NMR, IR, and single‐crystal X‐ray diffraction. The molecular geometry, vibrational frequencies, and gauge including atomic orbital (GIAO) ¹H and ¹³C NMR chemical shift values of the title compound in the ground state have been calculated by using the Hartree‐Fock (HF) and density functional theory (DFT/B3LYP) method with 6‐31G(d) basis sets, and compared with the experimental data. The calculated results show that the optimized geometries can well reproduce the crystal structural parameters, and the theoretical vibrational frequencies and GIAO ¹H and ¹³C NMR chemical shifts show good agreement with experimental values. The energetic behavior of the title compound in solvent media has been examined using B3LYP method with the 6‐31G(d) basis set by applying the Onsager and the polarizable continuum model (PCM). Besides, molecular electrostatic potential (MEP), frontier molecular orbitals (FMO) analysis, and nonlinear optical (NLO) properties of the title compound were investigated by theoretical calculations. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Three isomeric forms of hydroxyphenyl‐2‐oxazoline: 2‐(2‐hydroxyphenyl)‐2‐oxazoline, 2‐(3‐hydroxyphenyl)‐2‐oxazoline and 2‐(4‐hydroxyphenyl)‐2‐oxazoline

Crystal structures are reported for three isomeric compounds, namely 2‐(2‐hydroxy­phenyl)‐2‐oxazoline, (I), 2‐(3‐hydroxy­phenyl)‐2‐oxazoline, (II), and 2‐(4‐hydroxy­phenyl)‐2‐oxazoline, (III), all C₉H₉NO₂ [systematic names: 2‐(4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenol, (I), 3‐(4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenol, (II), and 4‐(4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenol, (III)]. In these compounds, the deviation from coplanarity of the oxazoline and benzene rings is dependent on the position of the hydroxy group on the benzene ring. The coplanar arrangement in (I) is stabilized by a strong intra­molecular O—H⋯N hydrogen bond. Surprisingly, the 2‐oxazoline ring in mol­ecule B of (II) adopts a ³T₄ (^C2T_C3) conformation, while the 2‐oxazoline ring in mol­ecule A, as well as that in (I) and (III), is nearly planar, as expected. Tetra­mers of mol­ecules of (II) are formed and they are bound together via weak C—H⋯N hydrogen bonds. In (III), strong inter­molecular O—H⋯N hydrogen bonds and weak intra­molecular C—H⋯O hydrogen bonds lead to the formation of an infinite chain of mol­ecules perpendicular to the b direction. This paper also reports a theoretical investigation of hydrogen bonds, based on density functional theory (DFT) employing periodic boundary conditions.     

Experimental and Theoretical Studies of 4‐(1‐benzyl‐5‐methyl‐1H‐1,2,3‐triazol‐4‐yl)‐6‐(2,4‐dichlorophenyl)pyrimidin‐2‐amine: A Potential Antibacterial Agent

The title compound ( 1 ), 4‐(1‐benzyl‐5‐methyl‐1H‐1,2,3‐triazol‐4‐yl)‐6‐(2,4‐dichlorophenyl)pyrimidin‐2‐amine (C₂₀H₁₆Cl₂N₆), was synthesized and structurally characterized by elemental analysis, ¹H NMR and ¹³C NMR and single crystal X‐ray diffraction. The compound crystallizes as a colourless needle shaped in the triclinic system, space group P‐1 with cell constants: a = 10.7557(11) Å, b = 12.7078(17) Å, c = 15.511(2) Å, α = 68.029(4)0, β = 86.637(5)0, γ = 87.869(4)0; V = 1962.4 (4) ų, Z = 4. There are two structurally similar but crystallographically independent molecules (A and B) in the asymmetric unit of the title compound, which is linked via N‐H…Cl hydrogen bond. An intramolecular C‐H…N hydrogen also occurs in each molecule. In the crystal, each of independent molecules forms a centrosymmetric dimer with an R²₂(8) ring motifs through a pair of N‐H…N hydrogen bonds. These dimers are further connected by intermolecular N‐H…Cl and C‐H…Cl hydrogen bonds, forming an infinite two dimensional supramolecular network lying parallel to the [010] plane. The molecular geometry was also optimized using density functional theory (DFT/B3LYP) method with the 6‐311G (d, p) basis set and compared with the experimental data. Mulliken population analyses on atomic charges, HOMO‐LUMO energy levels, Molecular electrostatic potential and chemical reactivity of the title compound were investigated by theoretical calculations. The thermo dynamical properties of the title compound at different temperature have been calculated and corresponding relations between the properties and temperature have also been obtained. The in vitro antibacterial activity has been screened against Gram‐positive (Bacillus cerus and Staphylococcus epidermidis) and Gram‐Negative (Escherichia coli, Acinetobacter baumannii and Proteus vulgaris). The results revealed that the compound exhibited good to moderate antibacterial activity.     

Unexpected Thermal Transformation of Aryl 3‐Arylprop‐2‐ynoates: Formation of 3‐(Diarylmethylidene)‐2,3‐dihydrofuran‐2‐ones

A number of aryl 3‐arylprop‐2‐ynoates 3 has been prepared (cf. Table 1 and Schemes 3 – 5). In contrast to aryl prop‐2‐ynoates and but‐2‐ynoates, 3‐arylprop‐2‐ynoates 3 (with the exception of 3b ) do not undergo, by flash vacuum pyrolysis (FVP), rearrangement to corresponding cyclohepta[b]furan‐2(2H)‐ones 2 (cf. Schemes 1 and 2). On melting, however, or in solution at temperatures >150°, the compounds 3 are converted stereospecifically to the dimers 3‐[(Z)‐diarylmethylidene]‐2,3‐dihydrofuran‐2‐ones (Z)‐ 11 and the cyclic anhydrides 12 of 1,4‐diarylnaphthalene‐2,3‐dicarboxylic acids, which also represent dimers of 3 , formed by loss of one molecule of the corresponding phenol from the aryloxy part (cf. Scheme 6). Small amounts of diaryl naphthalene‐2,3‐dicarboxylates 13 accompanied the product types (Z)‐ 11 and 12 , when the thermal transformation of 3 was performed in the molten state or at high concentration of 3 in solution (cf. Tables 2 and 4). The structure of the dihydrofuranone (Z)‐ 11c was established by an X‐ray crystal‐structure analysis (Fig. 1). The structures of the dihydrofuranones 11 and the cyclic anhydrides 12 indicate that the 3‐arylprop‐2‐ynoates 3 , on heating, must undergo an aryl O→C(3) migration leading to a reactive intermediate, which attacks a second molecule of 3 , finally under formation of (Z)‐ 11 or 12 . Formation of the diaryl dicarboxylates 13 , on the other hand, are the result of the well‐known thermal Diels‐Alder‐type dimerization of 3 without rearrangement (cf. Scheme 7). At low concentration of 3 in decalin, the decrease of 3 follows up to ca. 20% conversion first‐order kinetics (cf. Table 5), which is in agreement with a monomolecular rearrangement of 3 . Moreover, heating the highly reactive 2,4,6‐trimethylphenyl 3‐(4‐nitrophenyl)prop‐2‐ynonate ( 3f ) in the presence of a twofold molar amount of the much less reactive phenyl 3‐(4‐nitrophenyl)prop‐2‐ynonate ( 3g ) led, beside (Z)‐ 11f , to the cross products (Z)‐ 11fg , and, due to subsequent thermal isomerization, (E)‐ 11fg (cf. Scheme 10), the structures of which indicated that they were composed, as expected, of rearranged 3f and structurally unaltered 3g . Finally, thermal transposition of [¹⁷O]‐ 3i with the ¹⁷O‐label at the aryloxy group gave (Z)‐ and (E)‐[¹⁷O₂]‐ 11i with the ¹⁷O‐label of rearranged [¹⁷O]‐ 3i specifically at the oxo group of the two isomeric dihydrofuranones (cf. Scheme 8), indicating a highly ordered cyclic transition state of the aryl O→C(3) migration (cf. Scheme 9).     

1,1′‐Dimethoxy‐3,3′‐dimethyl‐3,3′‐(hexane‐1,6‐diyl)bis(triazen‐2‐ium‐2‐olate): a nitric oxide donor

The title compound, C₁₀H₂₄N₆O₄, is the most stable type of nitric oxide (NO) donor among the broad category of discrete N‐diazeniumdiolates (NO adducts of nucleophilic small molecule amines). Sitting astride a crystallographic inversion center, the molecule contains a symmetric dimethylhexane‐1,6‐diamine structure bearing two planar O²‐methylated N‐diazeniumdiolate functional groups [N(O)=NOMe]. These two groups are parallel to each other and have the potential to release four molecules of NO. The methylated diazeniumdiolate substituent removes the negative charge from the typical N(O)=NO⁻ group, thereby increasing the stability of the diazeniumdiolate structure. The crystal was nonmerohedrally twinned by a 180° rotation about the real [101] axis. This is the first N‐based bis‐diazeniumdiolate compound with a flexible aliphatic main unit to have its structure analyzed and this work demonstrates the utility of stabilizing the N‐diazeniumdiolate functional group by methylation.     

Crystal structure,thermal properties and detonation characterization of bis(5‐amino‐1,2,4‐triazol‐4‐ium‐3‐yl)methane dichloride

Bis(5‐amino‐1,2,4‐triazol‐4‐ium‐3‐yl)methane dichloride (BATZM·Cl₂ or C₅H₁₀N₈²⁺·2Cl^?) was synthesized and crystallized, and the crystal structure was characterized by single‐crystal X‐ray diffraction; it belongs to the space group C2/c (monoclinic) with Z = 4. The structure of BATZM·Cl₂ can be described as a V‐shaped molecule with reasonable chemical geometry and no disorder, and its one‐dimensional structure can be described as a rhombic helix. The specific molar heat capacity (C_p,m) of BATZM·Cl₂ was determined using the continuous C_p mode of a microcalorimeter and theoretical calculations, and the C_p,m value is 276.18 J K^?1 mol^?1 at 298.15 K. The relative deviations between the theoretical and experimental values of C_p,m, H_T – H_298.15K and S_T – S_298.15K of BATZM·Cl₂ are almost equivalent at each temperature. The detonation velocity (D) and detonation pressure (P) of BATZM·Cl₂ were estimated using the nitrogen equivalent equation according to the experimental density; BATZM·Cl₂ has a higher detonation velocity (7143.60 ± 3.66 m s^?1) and detonation pressure (21.49 ± 0.03 GPa) than TNT. The above results for BATZM·Cl₂ are compared with those of bis(5‐amino‐1,2,4‐triazol‐3‐yl)methane (BATZM) and the effect of salt formation on them is discussed.     

1,N6‐Etheno‐2′‐deoxytubercidin hemihydrate

The title compound [systematic name: 7‐(2‐deoxy‐β‐d ‐erythro‐pentofuranosyl)‐7H‐imidazo[1,2‐c]pyrrolo[2,3‐d]pyrimidine hemihydrate], 2C₁₃H₁₄N₄O₃·H₂O or (I)·0.5H₂O, shows two similar conformations in the asymmetric unit. These two conformers are connected through one water molecule by hydrogen bonds. The N‐glycosylic bonds of both conformers show an almost identical anti conformation with χ = −107.7 (2)° for conformer (I‐1) and −107.0 (2)° for conformer (I‐2). The sugar moiety adopts an unusual N‐type (C3′‐endo) sugar pucker for 2′‐deoxyribonucleosides, with P = 36.8 (2)° and τ_m = 40.6 (1)° for conformer (I‐1), and P = 34.5 (2)° and τ_m = 41.4 (1)° for conformer (I‐2). Both conformers and the solvent molecule participate in the formation of a three‐dimensional pattern with a `chain'‐like arrangement of the conformers. The structure is stabilized by intermolecular O—H...O and O—H...N hydrogen bonds, together with weak C—H...O contacts.     

2,3‐Dihydro‐3‐methyl‐2‐nitrimino‐1,3‐thiazole

The title compound {alternatively, 3‐methyl‐2‐[oxido(oxo)hydrazono]‐2,3‐dihydro‐1,3‐thiazole}, C₄H₅N₃O₂S, was obtained by methyl­ation of N‐(2‐thia­zolyl)­nitr­amine. The molecule lies on a mirror plane and the thia­zole ring is planar, regular in shape and aromatic. The S atom participates in the aromatic sextet via an electron pair on the 3p_z orbital. In the crystal, the mol­ecules are arranged in parallel layers, bound to each other by weak C—H?O and C—H?N hydrogen bonds and by S?O dipolar interactions, with an interlayer separation of 3.23 Å.     

Interaction of 3‐(2‐Aminophenyl)‐6‐R1‐1,2,4‐triazin‐5‐ones with Acylating Reagents: An Efficient Method for Preparation of 6‐Substituted 3‐R1‐2H‐[1,2,4]triazino[2,3‐c]quinazolin‐2‐ones

The series of 6‐substituted 3‐R¹‐2H‐[1,2,4]triazino[2,3‐c]quinazolin‐2‐one was prepared via condensation of 3‐(2‐aminophenyl)‐6‐R¹‐1,2,4‐triazin‐5‐ones with acylating reagents. Particularities of ¹H NMR spectra have been also discussed based on the comparison of experimental and theoretical results for 3‐methyl‐6‐phenyl‐2H‐[1,2,4]triazino[2,3‐c]quinazolin‐2‐one and its 4,3‐isomer.     

3‐Benzyl‐2‐(4‐fluorophenyl)‐1,3‐thiazolidin‐4‐one

The title compound, C₁₆H₁₄FNOS, crystallizes with Z′ = 2 in the space group P2₁/c. In one of the two independent molecules, the heterocyclic ring is effectively planar, but in the other molecule this ring adopts an envelope conformation. The molecules are weakly linked by two C—H...O hydrogen bonds to form C₂²(14) chains. Comparisons are made with some symmetrically substituted 2‐aryl‐3‐benzyl‐1,3‐thiazolidin‐4‐ones.     

(6‐Oxido‐2‐oxo‐1,2‐dihydropyrimidine‐5‐carboxylato‐κ2O5,O6)bis[2‐(2‐pyridyl)‐1H‐benzimidazole‐κ2N2,N3]manganese(II) monohydrate

In the title compound, [Mn(C₅H₂N₂O₄)(C₁₂H₉N₃)₂]·H₂O, the Mn^II centre is surrounded by three bidentate chelating ligands, namely, one 6‐oxido‐2‐oxo‐1,2‐dihydropyrimidine‐5‐carboxylate (or uracil‐5‐carboxylate, Huca²⁻) ligand [Mn—O = 2.136 (2) and 2.156 (3) Å] and two 2‐(2‐pyridyl)‐1H‐benzimidazole (Hpybim) ligands [Mn—N = 2.213 (3)–2.331 (3) Å], and it displays a severely distorted octahedral geometry, with cis angles ranging from 73.05 (10) to 105.77 (10)°. Intermolecular N—H...O hydrogen bonds both between the Hpybim and the Huca²⁻ ligands and between the Huca²⁻ ligands link the molecules into infinite chains. The lattice water molecule acts as a hydrogen‐bond donor to form double O...H—O—H...O hydrogen bonds with the Huca²⁻ O atoms, crosslinking the chains to afford an infinite two‐dimensional sheet; a third hydrogen bond (N—H...O) formed by the water molecule as a hydrogen‐bond acceptor and a Hpybim N atom further links these sheets to yield a three‐dimensional supramolecular framework. Possible partial π–π stacking interactions involving the Hpybim rings are also observed in the crystal structure.     

3,4,6‐Tri‐O‐acetyl‐1,2‐O‐[1‐(exo‐ethoxy)ethylidene]‐β‐d‐mannopyranose 0.11‐hydrate

The title compound, C₁₆H₂₄O₁₀·0.11H₂O, is a key intermediate in the synthesis of 2‐deoxy‐2‐[¹⁸F]fluoro‐d ‐glucose (¹⁸F‐FDG), which is the most widely used molecular‐imaging probe for positron emission tomography (PET). The crystal structure has two independent molecules (A and B) in the asymmetric unit, with closely comparable geometries. The pyranose ring adopts a ⁴C₁ conformation [Cremer–Pople puckering parameters: Q = 0.553 (2) Å, θ = 16.2 (2)° and ϕ = 290.4 (8)° for molecule A, and Q = 0.529 (2) Å, θ =15.3 (3)° and ϕ = 268.2 (9)° for molecule B], and the dioxolane ring adopts an envelope conformation. The chiral centre in the dioxolane ring, introduced during the synthesis of the compound, has an R configuration, with the ethoxy group exo to the mannopyranose ring. The asymmetric unit also contains one water molecule with a refined site‐occupancy factor of 0.222 (8), which bridges between molecules A and B via O—H...O hydrogen bonds.     

N‐(X‐Methylphenyl)‐2‐{(Z)‐[(2,3,4‐trimethoxyphenyl)methylidene]amino}‐4,5,6,7‐tetrahydro‐1‐benzothiophene‐3‐carboxamide,where X = 2 and 3

The title isomers, viz. the N‐(3‐methylphenyl)‐, (I), and N‐(2‐methylphenyl)‐, (II), derivatives, both C₂₆H₂₈N₂O₄S, adopt an E configuration that places the thiophene and trimethoxyphenyl groups on opposite sides of the C=N double bond, providing a suitable orientation for formation of an intramolecular N—H...N hydrogen bond. However, while the molecule in (I) is close to being planar, the N‐methylphenyl group in (II) is twisted significantly from the plane of the remainder of the molecule. Both crystal structures are essentially layered and there are no intermolecular N—H...O hydrogen bonds. Compound (I) has a significantly higher calculated density than (II) (1.340 cf 1.305 Mg m⁻³), indicating that the molecular packing in the meta isomer is overall more efficient than that in the ortho isomer.     

4‐Aminopyridinium 2‐(anthracen‐9‐yl)‐3‐oxo‐3H‐inden‐1‐olate monohydrate

The title compound, 2C₅H₇N₂⁺·2C₂₃H₁₃O₂⁻·H₂O, formed as a by‐product in the attempted synthesis of a nonlinear optical candidate molecule, contains two independent 4‐aminopyridinium cations and 2‐(anthracen‐9‐yl)‐3‐oxo‐3H‐inden‐1‐olate anions with one solvent water molecule. This is the first reported structure containing these anions. The two anions are not planar, having different interplanar angles between the anthracenyl and inden‐1‐olate moieties of 59.07 (5) and 83.92 (5)°. The crystal packing, which involves strong classical hydrogen bonds and one C—H...π interaction, appears to account for both the nonplanarity and this difference.