利用酸敏感超支化聚缩醛制备聚乳酸多孔微球

通过缩醛转移聚合合成了一种具有酸敏感特性的超支化聚缩醛(HBPAs),对该聚合物降解行为的研究表明,该聚合物具有很强的酸敏感特性,在pH为5.0时,短时间内可发生迅速的降解,而在pH为7.4时,该聚合物基本不发生降解.利用该聚合物的酸敏感特性,其在弱酸性条件下降解速率远远超过PLA的降解速率,制备了多孔PLA微球.进一步研究发现,通过调控超支化聚缩醛(HBPAs)与PLA的投料比,可以线性调控PLA多孔微球的孔径尺寸,并拟合得到了线性方程.DSC结果以及对微球降解过程的观察表明,在共混微球内部,HBPAs与PLA会发生一定的相分离,使得在酸降解的过程中,更有利于微球内部的HBPAs组分发生降解.     

单体慢加入技术对超支化聚合物分子参数的影响

详细分析了单体慢加入到多官能度核分子中制备超支化聚合物的动力学过程,以单体转化率为参数导出了产物的聚合度分布函数、平均聚合度、多分散性指标和支化度等分子参数的解析式,计算结果与文献报道的实验数据十分一致.分子参数依赖于核的官能度(f)、核分数(α)和单体转化率(x),这为通过聚合反应条件来进行分子结构的设计提供了理论依据.与一步聚合方法的产物相比,单体慢加入技术能够改进产物的分子量分布,提高其支化度.     

超支化聚合反应的多尺度模拟

超支化聚合物具有与树枝状大分子相似的物理和化学性质,其具有合成简单、分子量分布宽等突出特点,超支化聚合物分子的结构形成取决于聚合反应过程,本文介绍了超支化聚合反应模拟研究的最新进展.首先介绍了八位置键涨落粗粒化格子模型在超支化聚合反应模拟中的应用,该方法考虑了聚合物分子空间位阻效应、分子内成环和反应点活性等影响因素,从而可以模拟不同类型的超支化聚合反应;为了定量描述单体和聚合物分子结构,研究者进一步发展了杂化多尺度超支化聚合反应模拟方法,该方法通过玻尔兹曼反演迭代方法获取单体和聚合物特异性粗粒化力场,然后通过粗粒化分子动力学方法结合反应性Monte Carlo方法对特异性超支化聚合反应进行定量模拟.多尺度聚合反应模拟不仅可以精确计算超支化聚合物分子量、多分散性指数和支化度等一般性聚合物参数,还可以获取分子成环率、超支化大分子构象等重要分子结构信息,在超支化聚合反应基础研究与预测方面具有重要应用价值.     

AB2型β-环糊精功能单体及其水溶性超支化聚合物的合成与表征

为了得到结构确定的β-环糊精大单体并用于超支化聚合,通过对β-环糊精上6位伯羟基和2位仲羟基的多步功能化改性得到了同时含有Si—H和—CH CH2基团的AB2型β-环糊精大单体,并利用硅氢加成反应一步法合成了一种新型的水溶性超支化聚合物,其具有β-环糊精空腔和超支化空穴两种疏水单元,从而可构建出一种新颖的超分子体系.采用1H-NMR、13C-NMR、飞行时间质谱和元素分析对AB2单体及其聚合物的结构进行了表征.结果表明,单体和聚合物的结构与所设计的分子结构相符合.凝胶渗透色谱/多角度激光光散射(SEC/MALLS)联用仪测得该聚合物的数均分子量、分子量分布及特性黏数分别为36690、1.887和15.8mL/g.     

超支化聚(胺酯)的分子设计及其制备

以丙烯酸甲酯和二乙醇胺为原料由Michael加成反应制得N ,N 二羟乙基 3 胺基丙酸甲酯单体 ,再用“准一步法”和“发散法”使之与 1 ,1 ,1 三羟甲基丙烷 (核 )反应合成一种新型超支化聚 (胺 酯 ) .以核磁共振和元素分析方法对N ,N 二羟乙基 3 胺基丙酸甲酯单体的分子结构进行了表征 .GPC测定表明合成的超支化聚 (胺 酯 )分子量分布窄 ,具有单分散性 ;粘度小于同分子量的线形分子 ;耐热性能较好 ,失重温度高于2 0 0℃ .     

含香豆素基团超支化星形聚合物的合成与表征

设计并合成了含有香豆素基团的自引发单体, 与2-(2-甲氧基乙氧基)乙基甲基丙烯酸酯(MEO₂MA)进行自缩合乙烯基共聚合后得到超支化聚合物H-PMEO₂MA. 以其作为大分子引发剂, 进行二甲氨基乙基甲基丙烯酸酯(DMAEMA)的原子转移自由基聚合, 合成了具有温度响应性的超支化星形聚合物H-PMEO₂MA-star-PDMAEMA. 将此超支化星形聚合物在水中自组装成胶束后, 利用支化点处香豆素基团的光二聚性能, 在λ=320 nm的紫外光照射下进行香豆素间的光交联反应, 形成核交联胶束. 此核交联胶束在254 nm紫外光照射下则会发生解交联反应. 采用尼罗红作为模型药物, 将其装载到超支化星形聚合物胶束中, 研究了不同条件下的药物释放行为.     

分批投料模式下加核自缩合乙烯基体系的Monte Carlo模拟

通过Monte Carlo 模拟方法对加核自缩合乙烯基体系在分批投料模式下的聚合行为进行研究, 考察了引发核的加入时间及分批投料方式对超支化高分子的重均分子量及多分散指数的影响. 研究结果表明, 不同的分批投料方式对超支化高分子的重均分子量和多分散性具有显著的调控作用. 通过调整投料方式、 投料次数、 引发核官能度和转化率等因素, 可以得到分子量较高且多分散性较好的超支化高分子.     

新型双功能性超支化聚合物的制备及表征

首先以烯丙基缩水甘油醚与N-氨乙基哌嗪反应合成新型B3单体,然后分别以六亚甲基二异氰酸酯和1,6-己二硫醇为A2单体与上述B3单体反应,利用异氰酸-羟基以及巯基-烯的反应,合成了同时含有羟基和烯丙基的双功能性超支化聚(氨酯-胺)和聚(硫醚-胺)。研究了单体种类及投料比与合成的超支化聚合物的化学与拓扑结构的关系。通过红外吸收光谱、核磁共振氢谱和凝胶渗透色谱表征了超支化聚合物的分子结构和化学组成。结果表明:该B3单体同时带有3个羟基与3个烯丙基,当A2和B3单体投料比(物质的量之比)为0.825∶1时,可以成功制备较高分子量的双功能性超支化聚合物。     

AB_g型单体超支化聚合反应的理论模型

超支化聚合物的可控制备与分子设计对其工业化应用是十分重要的,这有待于弄清超支化聚合物的形成机理.本文回顾了早期关于超支化聚合物的Flory-Stockmayer理论,重点介绍与ABg型单体相关的超支化聚合反应的动力学原理,这是我国科学家在这一领域的工作亮点,在国际上受到了广泛的关注.相比其它一些理论方法,聚合反应动力学理论原理清晰,可通过解动力学微分方程导出反应产物的平均支化度和聚合度分布函数的解析式,由此可以计算各种分子参数,为超支化聚合物的分子设计和可控制备提供了理论基础.     

含光敏剂184结构的超支化碱溶性感光聚合物的合成及性能

以季戊四醇为“中心核”,通过与偏苯三酸酐,环氧氯丙烷反应合成超支化聚酯,利用合成聚合物分子外围的羧基与含环氧基的1-羟基环己基苯基酮、甲基丙烯酸缩水甘油酯反应合成分子末端含光敏剂结构的超支化碱溶性感光聚合物。聚合反应转化率在1 h内可达80%以上;合成聚合物的玻璃化转变温度为200℃,200℃以内无失重,200~300℃之间有轻微失重,其粘度表现为超支化聚合物的粘度特性,并且在碱性水溶液中溶解性好,无需外加光敏剂,在紫外光照射下便可固化、交联,具有较小的凝胶曝光能量E0(1×10-3~1×10-2J/cm2)和较好的光敏性。     

SYNTHESIS OF POLY(METHYL METHACRYLATE)-graft-POLYSTYRENE BY ATOM TRANSFER RADICAL POLYMERIZATION

The radical copolymerization of methyl methacrylate and 2-hydroxyethyl methacrylate was carried out via atomtransfer radical polymerization (ATRP) initiated by ethyl 2-bromoisobutyrate and catalyzed by CuBr/2,2'-bipyridinecomplex. This polymerization proceeds in a living fashion with controlled molecular weight and low polydispersity. Theobtained copolymer was esterified with 2-bromoisobutylryl bromide yielding a macroinitiator, poly(methyl methacrylate-co-2-hydroxyethyl methacrylate-co-2-(2-bromoisobutyryloxy)ethyl methacrylate), and its structure was characterized by ~1H-NMR. This macroinitiator was used for ATRP of styrene to synthesize poly(methyl methacrylate)-graft-polystyrene. Themolecular weight of graft copolymer increased with the monomer conversion, and the polydispersity remained relatively low.The individual grafted polystyrene chains were cleaved from the macroinitiator backbone by hydrolysis and the hydrolyzed product was characterized by ~1H-NMR and GPC.     

多重响应性超支化星形聚合物的合成与组装以及控制释放研究

含二硫键的自引发单体与2-(2-甲氧基乙氧基)乙基甲基丙烯酸酯(MEO₂MA)进行自缩合乙烯基共聚合得到超支化PMEO₂MA(H-PMEO₂MA). 以它作大分子引发剂, 引发二甲氨基乙基甲基丙烯酸酯(DMAEMA)进行原子转移自由基聚合, 合成了具有温度、pH以及氧化还原多重响应性的超支化星形聚合物H-PMEO₂MA-star-PDMAEMA. 证明了H-PMEO₂MA有低临界溶液温度(LCST); 研究了PDMAEMA 链段的长度和溶液的pH值对超支化星形聚合物的LCST的影响. 当H-PMEO₂MA-star-PDMAEMA水溶液温度从2 ℃升高至室温, H-PMEO₂MA变成疏水性而发生聚集, 形成以H-PMEO₂MA为核, PDMAEMA为壳的胶束. 在胶束形成过程中, 将尼罗红装载到这种聚合物胶束中, 形成释药系统, 研究了pH、氧化还原响应性释药性能.     

Polysiloxanes polymers with hyperbranched structure and multivinyl functionality

Hyperbranched polysiloxane polymers with multivinyl functionality were designed and synthesized through a “one‐step and one‐pot” deactivation enhanced atom transfer polymerization (DE‐ATRP) approach from the copolymerization of polydimethylsiloxane (PDMS) macromonomers and divinylbenzene (DVB). Various feed ratios of siloxane‐based monomer and divinyl monomers were investigated. We showed that even at DVB concentrations as high as 80 mol % in the feed, 65% yield of hyperbranched polymer could be obtained without gelation because the DE‐ATRP suppressed the rapid formation of macronetwork structures. The molecular weight, polydispersity, macromolecular structure of hyperbranched poly(DVB‐co‐PDMS) as well as its viscosity in silicone oil were characterized by GPC‐MALLS, ¹H NMR and rheometer. By tracking the relationship between the radius of gyration, elution volume and molecular weight from MALLS analysis, solid evidences of the highly branched and condensed structure of the polymers were obtained. Furthermore, the oil thickening experiments demonstrate that this hyperbranched polymer can act as a well‐controlled viscosity‐modifier for Silicone oils, which potentially will have important application in coating, cosmetic and pharmaceutical products. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Investigation of specific AB2 type hyperbranched polyesterification reaction with Monte Carlo simulation

The AB₂ type bulk polymerization of 3,5-bis(trimethylsiloxy)benzoyl chloride is studied by the reactive 3d bond fluctuation lattice model (3d-BFLM). Through tuning the reactivity parameters, the experimental data are fitted well via an iterative dichotomy method. By using the optimized reactivity parameters, the number-average degree of polymerization and degree of branching obtained in simulation are very close to experimental data. Meanwhile, the information about the weightaverage degree of polymerization and the polydispersity index is provided, and the internal structural properties of hyperbranched polyesters are investigated. Simulation results demonstrate that the 3d-BFLM can be used to study specific hyperbranched polymerizations semi-quantitatively which is helpful to deep understand the kinetics of reactions and make predictions for specific polymerization systems.     

由聚丙二醇二缩水甘油醚和甘油制备温敏性超支化聚合物

由聚丙二醇二缩水甘油醚和甘油通过质子转移聚合(proton transfer polymerization)一步法制备了端羟基的温敏性超支化聚醚.聚合产物的分子量(Mn)在1.76×104~2.43×104之间,玻璃化转变温度(Tg)在-31.5~-26.7℃之间,热分解温度(Td)在367~376℃之间.通过控制聚丙二醇二缩水甘油醚和甘油的投料比,实现了对温敏性超支化聚醚最低临界溶解温度(LCST)的调节,LCST可控制在28.3~39.6℃之间.     

多官能团单体对超支化聚酰胺酯光固动力学及其固化膜热性能的影响

以1,1,1-三羟甲基丙烷为核,4-N,N-（2-羟乙基）-4-酮丁酸为单体,按照 一定比例,合成理论上第二代羟端基超支化聚酰胺酯,再与丙烯酰氯反应获得丙烯 酸化超支化聚酰胺酯预聚物（HAPAE-2-A）,它在光引发剂存在下经紫外光辐照可 以快速固化成膜。根据~1H NMR 谱测定所得产物的反应程度为85%。采用凝胶渗透 色谱和气相渗透法测定所得产物的分子量分布和数均分子量分别为2.16和1620 g/mol,与其理论分子量相比,其反应程度为89%,从而估算产物实际端基丙烯酸 酯双键数为10左右。采用光-差热分析仪研究HAPAE-2-A的反应动力学,发现当体系 中加入多官能团单体,如三羟甲基丙烷三丙烯酸酯、己二醇二丙烯酸酯和乙氧基一 缩二乙二醇丙烯酸酯时,多官能团单体的官能度及含量会对体系的最大光聚合反应 速率和不饱和双键的反应程度产生较大的影响。通过动态力学热性能测试发现 HAPAE-2-A光固化膜的玻璃态转化温度随多官能团单体的加入而提高。     

Comparative study of amphiphilic hyperbranched and linear polymer stabilized organo‐soluble gold nanoparticles as efficient recyclable catalysts in the biphasic reduction of 4‐nitrophenol

A series of organo‐soluble spherical gold nanoparticles (AuNPs) were prepared through the reduction of HAuCl₄ by NaBH₄ in the presence of amphiphilic hyperbranched polymers that had a hydrophilic hyperbranched polyethylenimine core and a hydrophobic shell formed by many palmitamide (C16) chains. For comparison, the corresponding linear polymeric analog derived from linear polyethylenimine was also used to prepare the organo‐soluble AuNPs. The obtained AuNPs were characterized by transmission electron microscopy. It was found that higher feed ratio of polymer to HAuCl₄ and utilization of polymers with higher C16 density usually resulted in smaller AuNPs with relatively lower polydispersity. Except of the polymer having the pronounced low molecular weight, the molecular weight and the morphology of the amphiphilic polymers had almost no obvious effect on the size of the formed AuNPs. These organo‐soluble AuNPs could be used as efficient catalysts for the biphasic catalytic reduction of 4‐nitrophenol by NaBH₄. Their apparent rate coefficients had correlation with the molecular weight of the used amphiphilic polymers, but were less relevant to the morphology of these polymers. These organo‐soluble AuNPs could be conveniently recovered and reused many times. The morphology of the capping polymers had obvious effect on the lifetime of the AuNPs catalysts in the catalytic reduction of 4‐nitrophenol. Except of the pronounced low molecular weight hyperbranched polymer, the other hyperbranched ones with relatively high molecular weight rendered the AuNPs to have bigger turnover number values than their linear analog. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

可控降解超支化聚碳硅氮烷的合成与表征

通过锂化四甲基二乙烯基二硅氮烷分别与甲基氢二氯硅烷和二甲基氢氯硅烷的亲核取代反应合成了AB4和AB2型单体AB4M和AB2M,两种单体通过Karstedt催化剂催化的硅氢加成反应分别生成聚碳硅氮烷PAB4M和PAB2M.单体和聚合物的结构通过FT-IR、1H-NMR、13C-NMR、29Si-NMR和体积排除色谱-多角度激光光散射联用(SEC-MALLS)技术进行了表征,结果表明,单体的结构与设计结构相符合;单体聚合时主要以α-硅氢加成方式为主;聚合物具有超支化结构并由N(Si—C)3链节和大量端基双键组成.PAB4M和PAB2M的重均分子量分别为7800和5860g/mol,分子量分布系数分别为2·54和2·31·对PAB4M稳定性的初步研究表明,该聚合物对氯硅烷和在中性条件下对水稳定,但在HCl水溶液中可以降解,且通过控制HCl浓度可以调节其降解速度,从而实现对其控制降解.     

Functional,hyperbranched polyesters via baylis–hillman polymerization

Hyperbranched polyesters are among the most common hyperbranched polymers. One of the interesting features of hyperbranched polyesters is that they contain unreacted hydroxyl and carboxylic acid groups at the linear and terminal structural units, which can be postmodified to adjust thermal, solubility, or mechanical properties, or to prepare core–shell type architectures. This article reports on the synthesis of a novel class of hyperbranched polyesters via an A₂ + B₃ type Baylis–Hillman polymerization of 2,6‐pyridinedicarboxaldehyde and trimethylolpropane triacrylate. Baylis–Hillman polymerization generates highly functional polyesters that contain not only unreacted aldehyde and/or acrylate groups at the linear and terminal structural units but also chemically orthogonal vinyl and hydroxyl groups along the polymer backbone. Using 3‐hydroxyquinuclidine as the catalyst, hyperbranched polymers with number‐average molecular weights up to 7500 g/mol and degrees of branching up to 0.81 were obtained. To demonstrate the versatility of these hyperbranched polyesters to act as platforms for further derivatization, the orthogonal postpolymerization modification of the hydroxyl, vinyl, and pyridine functional moieties with phenyl isocyanate, methyl‐3‐mercaptopropionate, and methyl iodide is presented. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012.     

Kinetics of nonideal hyperbranched A2 + B3 polycondensation: Simulation and comparison with experiments

To overcome the deficiency of mean field method in introducing the intramolecular cyclization and the steric effects, the reactive bond fluctuation model was applied to study nonideal hyperbranched A₂ + B₃ polycondensation, which has high sensitivity of gelation to the concentration of monomers, the feed ratio and the reactivity of functional groups. Simulation demonstrated that the mean field theory overestimated hyperbranched polymerization especially at high reaction conversion in the system with low monomer concentration where the intramolecular cyclization and the steric hindrance play crucial influences on molecular weight, molecular weight distribution and gel point (GP). The dependences of GP on the monomer concentration, feed ratio, and the reactivity of groups are clearly shown. We further simulated a specific polycondensation system with aromatic terephthaloyl chloride (TCl, A₂) and 1,1,1‐tris(4‐trimethylsiloxyphenyl)ethane (TMS‐THPE, B₃) (Macromolecules 2007, 40, 6846) using fitting technology, and estimated molecular weight, molecular weight distribution, GPs, and the conformation of hyperbanched polymer. It provides a feasible way to quantitatively understand hyperbranched polymerization with the reaction specificity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010