四臂星形聚苯乙烯在良溶剂和0溶剂中分子扩散的光子相关光谱的研究

用光子相关光谱研究了四臂星形聚苯乙烯在良溶剂(四氢呋喃THF)和θ溶剂(环己烷CH)中扩散系数与溶剂的浓度和温度的依赖关系。用累积量方法分析光子相关数据给出了多分散样品的Z均扩散系数。在θ溶剂中,高于或低于θ温度时,聚合物在溶液中的分子扩散分别表现出具有在良溶剂与不良溶剂中的行为。外推浓度至零,得到无限稀时不同温度的分子扩散系数,借助Stokes-Einstein方程,给出了聚合物的流体力学半径。通过InD对I/T作图,得到了星形聚苯乙烯在THF与CH中的扩散活化能。     

两性星形嵌段共聚物的结晶及络合性质

研究了聚苯乙烯(S)-聚环氧乙烷(E)星形嵌段共聚物的结晶及络合性质.结果表明,结晶度随E含量及分子量增大而增大.共聚物熔融后在20℃淬火比0℃淬火的结晶规整,氯仿溶液浇铸的样品比乙苯浇铸的规整.共聚物在甲苯溶液中呈现特殊的介晶现象.紫外吸收光谱表明,它能与苦味酸碱金属盐络合,使不溶于氯仿及甲苯的钾盐或钠盐进入溶液.     

聚甲基丙烯酸甲酯/星形聚乙二醇半互穿聚合物网络的形状记忆性能和分子机理

采用非共价复合方法,设计并合成了具有星形结构的聚甲基丙烯酸甲酯/星形聚乙二醇半互穿聚合物网络(PMMA/SPEG)和聚甲基丙烯酸甲酯/线性聚乙二醇半互穿聚合物网络(PMMA/LPEG).研究了PEG分子量对PMMA/SPEG和PMMA/LPEG的热性能、机械性能、动态机械性能和形状记忆性能的影响.结果表明,与PMMA/LPEG相比,星形结构的嵌入显著提高了PMMA/SPEG复合物的机械性能、形状回复率和回复速度.采用Edwards管道模型理论对其形状记忆效应的分子机理进行了阐释,利用材料的应力松弛特性对机理分析进行了验证.     

嵌入花生酸镉单层中的卟啉-紫精分子聚集行为的研究

本文制备了卟啉-紫精与花生酸镉混合LB膜, 用紫外可见光谱研究了膜中卟啉基团的聚集及取向, X射线衍射说明混合LB膜具有层状有序的周期结构。扫描电镜结果表明: 通过调节膜的表面压可使聚集成"微畴"的卟啉-紫精均匀分布在花生酸镉单分子层中, 随膜表面压的增大, 小的"微畴"相互连接形成更大的"微畴"。电子衍射说明混合膜中两组份分相存在, 且都为六角对称的有序结构。     

聚环氧乙烷的双层片晶

聚环氧乙烷(M_n=7000)的双层片晶形态用透射电镜和差示扫描量热计进行了研究。在结晶温区54—56℃,现察到双层片晶,高于这个温区,同时看到双层片晶及单层片晶,低于这个温区,只看到单层片晶。双层片晶的熔点稍高于单层片晶。根据非整数次折迭链晶向整数次折迭链晶的转变,讨论了双层片晶和单层片晶的生长过程。在双层片晶界面上的H键降低了表面自由能,这是形成双层片晶的主要原因。     

Molecular weight dependence of crystal pattern transitions of poly(ethylene oxide)

Crystal patterns in ultrathin films of six poly(ethylene oxide) fractions with molecular weights from 25000 to 932000 g/mol were characterized within crystallization temperature range from 20 ℃ to 60 ℃.Labyrinthine,dendritic and faceted crystal patterns were observed in different temperature ranges,and then labyrinthine-to-dendritic and dendritic-tofaceted transition temperatures T L-D and T D-F were quantitatively identified.Their molecular weight dependences are T L-D(M w) = T L-D(∞) K L-D /M w,where T L-D(∞) = 38.2 ℃ and K L-D = 253000 ℃.g/mol and T D-F(M w) = T D-F(∞) K D-F /M w,where T D-F(∞) = 54.7 ℃ and K D-F = 27000 ℃.g/mol.Quasi two-dimensional blob models were proposed to provide empirical explanations of the molecular weight dependences.The labyrinthine-to-dendritic transition is attributed to a molecular diffusion process change from a local-diffusion to diffusion-limited-aggregation(DLA) and a polymer chain with M w ≈ 253000 g/mol within a blob can join crystals independently.The dendritic-to-faceted transition is attributed to a turnover of the pattern formation mechanism from DLA to crystallization control,and a polymer chain with a M w ≈ 27000 g/mol as an independent blob crosses to a depletion zone to join crystals.These molecular weight dependences reveal a macromolecular effect on the crystal pattern formation and selection of crystalline polymers.     

PEO分子量对POM/PEO晶/晶共混物溶液结晶的影响

以六氟异丙醇(HFIP)为聚甲醛(POM)与聚氧化乙烯(PEO)的共溶剂,通过溶液结晶研究了PEO分子量对POM/PEO 50/50晶/晶共混物结晶行为及结晶形态的影响。结果表明,PEO分子量越小,POM与PEO在结晶过程中相互干扰越大。当PEO分子量为4×103时,共混物中POM形成部分不完善晶体,出现明显的熔融双峰。SEM结果表明:含不同分子量PEO的共混晶体均无明显相分离,且低分子量PEO的共混物更易形成规整球晶,认为通过溶液结晶,POM/PEO 50/50共混物中POM与PEO形成了晶体相互穿插的结晶结构。     

PEO／PVP共混体系结晶行为

本文用WAXD、PLM、DSC方法研究了聚氧化乙烯(PEO)/聚乙烯基吡咯烷酮(PVP)共混体系的结晶行为,探索了两组分聚合物间相互作用及体系结晶度与非晶组分含量的关系。DSC研究表明PEO/PVP共混体系具有两个玻璃化转变温度,分别是纯组分的T_g,无相容性。应用Avrami和LH方程对其动力学参数进行了研究。偏光显微镜观察了共混物结构形态。     

聚氧化乙烯(PEO)/聚双酚A羟基醚(PBHE)共混体系的非等温结晶动力学

本文联系Avrami方程和Ozawa方程,得出一个适合于非等温结晶动力学过程的新的基本方程,由这个方程可获得描述非等温结晶动力学过程的某些参数,并用DSC方法,对PEO/PBHE共混体系的非等温结晶动力学进行了研究,对实验结果进行了讨论.     

Controlled synthesis of AB2 amphiphilic triarm star-shaped block copolymers by ring-opening polymerization

This paper describes the synthesis of a novel amphiphilic AB₂ triarm star-shaped copolymer with A = non-toxic and biocompatible hydrophilic poly(ethylene oxide) (PEO) and B = biodegradable and hydrophobic poly(ε-caprolactone) (PCL). A series of AB₂ triarm star-shaped copolymers with different molecular-weights for the PCL block were successfully synthesized by a three-step procedure. α-Methoxy-ω-epoxy-poly(ethylene oxide) (PEO-epoxide) was first synthesized by the nucleophilic substitution of α-methoxy-ω-hydroxy-poly(ethylene oxide) (MPEO) on epichlorohydrin. In a second step, the α-methoxy-ω,ω′-dihydroxy-poly(ethylene oxide) (PEO(OH)₂) macroinitiator was prepared by the selective hydrolysis of the ω-epoxy end-group of the PEO-epoxide chain. Finally, PEO(OH)₂ was used as a macroinitiator for the ring-opening polymerization (ROP) of ε-caprolactone (εCL) catalyzed by tin octoaote (Sn(Oct)₂). PEO-epoxide, PEO(OH)₂ and the AB₂ triarm star-shaped copolymers were assessed by ¹H NMR spectroscopy, size exclusion chromatography (SEC) and MALDI-TOF. The behavior of the AB₂ triarm star-shaped copolymer in aqueous solution was studied by dynamic light scattering (DLS) and transmission electron microscopy (TEM).     

P（MMA—MAA）／PEO氢键复合物的增容效应

本文研究了P(MMA-MAA)/PEO氢键复合物对一些聚合物共混体系的增容效应。首次用机械共混方法制备了P(MMA-MAA)/PEO氢键复合物。该复合物不能被甲醇革取,其热失重行为不是其组分聚合物的加和,表明此复合物不是简单的共混物。实验结果证实,该复合物可以改进PMMA/PEO体系的相容性,改善PVC共混体系的力学性能和加工性能。     

Conformation and electrochemical reduction of myoglobin in PEO oligomers

Horse-heart myoglobin (Mb) was modified with poly(ethylene oxide) (PEO) to solubilize it in PEO oligomers. PEO-modified Mb (PEO–Mb) showed a quasi-reversible electrochemical redox reaction in PEO₂₀₀ (molar mass of 200 g). PEO–Mbs, modified with lower molecular weight of PEO chains, were soluble in PEO oligomers with wider range of molecular weight. A conformation of PEO–Mb was studied with circular dichroism spectroscopy in phosphate buffer solution (PBS) or PEO oligomers. The α-helix content of PEO–Mb, determined by the molar ellipticity at 222 nm, decreased from 71% to about 58% after PEO modification. However, the degree of PEO modification did not affect the α-helix content of PEO–Mbs. On the other hand, the α-helix content of PEO–Mbs was reduced by lowering the molecular weight of the modified PEO chains. Since the α-helix content of PEO–Mb in PBS and that in the PEO oligomers were almost identical, the conformation of PEO–Mb in PBS was considered to be maintained even in PEO oligomers. Although the reduction rate constant of PEO–Mb in PEO oligomers depended on the total molecular weight of the PEO–Mbs, their relation did not obey the Stokes–Einstein equation. The reduction of the PEO–Mb was probably affected by the interfacial electron transfer process at the electrode surface rather than by diffusion in the PEO oligomer.     

聚己内酯和聚氧化乙烯共混体系中的两类片晶相间堆砌

对聚(ε-己内酯)(PCL)/聚氧化乙烯(PEO)共混物的相差显微镜、广角X-射线衍射(WAXD)、小角X-射线散射(SAXS)及示差扫描量热计(DSC)等的研究表明,只有当共混物中PCL(或PEO)的含量低于20％时,两组份是相容的.当PCL含量低于20％时,在共混物中形成了PEO片晶和PCL片晶相间堆砌的结晶形态,当PEO含量不超过20％时,PEO则完全以非晶形式混入PCL的非晶区,同时阻碍了PCL的结晶.可见在结晶过程中,相容的两组份对共混体系形态结构的影响却不尽相同.     

Ionic transport studies on (PEO)6:NaPO3 polymer electrolyte plasticized with PEG400

Conduction characteristics of the poly(ethylene oxide) based new polymer electrolyte (PEO)₆:NaPO₃, plasticized with poly(ethylene glycol) are investigated. Free standing flexible electrolyte films of composition (PEO)₆:NaPO₃ + x wt.% PEG₄₀₀ (30 ? x ? 70) are prepared by solution casting method. A combination of X-ray diffraction (XRD), optical microscopy and differential scanning calorimetry (DSC) studies have indicated enhancement in the amorphous phase of polymer due to the addition of plasticizer. Further, a reduction in the glass transition temperature observed from the DSC result has inferred increase in the flexibility of the polymer chains. The cationic transport number (t_Na⁺) of 0.42 determined through combined ac-dc technique has confirmed ionic nature of conducting species. Ionic conductivity studies are carried out as a function of composition and temperature using complex impedance spectroscopy. The electrolyte with maximum PEG₄₀₀ content has exhibited an enhancement in the conductivity of about two orders of magnitude compared to the host polymer electrolyte. The complex impedance data is analyzed in conductivity, permittivity and electric modulus formalism in order to throw light on transport mechanism. A solid state electrochemical cell based on the above polymer electrolyte with a configuration Na|SPE|(I₂ + acetylene black + PEO) has exhibited an open circuit voltage of 2.94 V. The discharge characteristics are found to be satisfactory as a laboratory cell.