乡村绿色生态旅游适宜等级VIKOR评估方法

针对乡村绿色生态旅游特征,并考虑旅游者个体感受与群体效益,本文从乡村绿色生态旅游开发与适宜评级概念出发,提出乡村绿色生态旅游适宜等级VIKOR评估模型与方法。首先,从等级评估的概念与内涵出发,刻画乡村绿色生态旅游适宜评级问题,避免混淆旅游适宜评级和排序两个本质不同的问题。然后,构建乡村绿色生态旅游适宜等级评估指标及隶属函数,提出评估指标的熵权确定方法。其次,提出乡村绿色生态旅游适宜等级VIKOR评估模型与二元语义等级评估方法。最后,通过案例研究和比较分析,说明本文所提模型与方法的合理性、可行性与实用性。     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

Interpreting linear systems of equalities and inequalities. Application to the water supply problem

This paper shows how the mathematical and the engineering points of view are complementary and help to model real problems that can be stated as systems of linear equations and inequalities. The paper is devoted to point out these relations and making them explicit for the readers to realize about the new possibilities that arise when contemplating the compatibility conditions or the set of general solutions from the dual perspective. After reviewing an orthogonally based powerful algorithm to analyse the compatibility of linear systems of equations and solving them, a water supply problem is used to illustrate its mathematical and engineering multiple aspects, including the optimal statement of the problem in terms of an adequate selection and numbering of equations and unknowns, an analysis of the compatibility conditions and a physical interpretation of the general solution, together with that of each individual generators of the affine space. The possibilities of removing unknowns without altering the compatibility of the problem is also analysed. Next, the Γ‐algorithm to analyse the compatibility of linear systems of inequalities and solving them is described and then, the water supply problem is revisited adding some constraints, such as capacity limits for the pipes and retention valves, and discussed as to how they affect the resulting general solution and other aspects. Finally, some conclusions are derived. Copyright © 2005 John Wiley & Sons, Ltd.     

On the use of history of mathematics: an introduction to Galileo's study of free fall motion

In this paper, we report on an experimental activity for discussing the concepts of speed, instantaneous speed and acceleration, generally introduced in first year university courses of calculus or physics. Rather than developing the ideas of calculus and using them to explain these basic concepts for the study of motion, we led 82 first year university students through Galileo's experiments designed to investigate the motion of falling bodies, and his geometrical explanation of his results, via simple dynamic geometric applets designed with GeoGebra. Our goal was to enhance the students’ development of mathematical thinking. Through a scholarship of teaching and learning study design, we captured data from students before, during and after the activity. Findings suggest that the historical development presented to the students helped to show the growth and evolution of the ideas and made visible authentic ways of thinking mathematically. Importantly, the activity prompted students to question and rethink what they knew about speed and acceleration, and also to appreciate the novel concepts of instantaneous speed and acceleration at which Galileo arrived.     

激光辐照下圆薄板的动态屈曲研究

对强激光辐照下薄板（铜片）的动态热失稳过程进行了分析，得出了简支圆薄板在热冲击下发生的屈曲及后屈曲过程，并给出了临界激光功率密度与薄板厚径比的关系曲线，方法计入了温度分布、惯性项和缺陷大小对于失稳过程的影响。这一工作有利于人们对强激光引起的硬目标破坏机理的认识。     

基于系统动力学的政府和废旧电子产品处理商演化博弈分析

文章为探究政府管制在废旧电子产品处理商实施生态拆解的作用,运用系统动力学方法构建了废旧电子产品处理问题中政府和处理商之间的一个混合策略演化博弈模型,并对政府管制策略选择与处理商实施生态拆解策略选择的互动机制进行了分析。演化博弈和系统仿真结果表明:处理商实施生态拆解和非生态拆解的收益、政府管制的有效性以及处理商实施非生态拆解受到惩罚等都直接影响系统的演化结果;政府和处理商两群体在3种情形下存在演化稳定策略;在一定的条件下,系统演化呈现周期性特征。最后从政府管制的角度出发,动态策略的演化博弈模型存在演化稳定的均衡点。     

房地产业对中国经济真的那么重要吗？

为恰当评估房地产业对中国经济的重要性,通过编制2002、2007和2012年中国社会核算矩阵,进行乘数分解和结构化路径分析的结果表明:房地产业对行业总产出、劳动力和资本报酬、居民和企业收入的拉动作用极低。房地产业主要对金融业、租赁和商务服务业、建筑业以及金属冶炼与压延加工业四个行业的产出影响比较显著,对前三个行业主要是直接的一步式影响,与房地产业紧密相关的产业链条并不长。房地产业对要素报酬和机构收入的拉动总效应极小,且主要是开环效应,与此同时,房地产业主要通过自身和金融业影响要素报酬进而影响机构收入,特别是对资本报酬和企业收入的影响简单、直接,高度依赖这两条基础路径。土地出让金和房地产有关税收已成为地方政府的主要收入来源。房地产开发和运营商、金融机构和地方政府已成为房地产业发展过程中最主要的利益相关方。     

The generalized hierarchical product of graphs

A generalization of both the hierarchical product and the Cartesian product of graphs is introduced and some of its properties are studied. We call it the generalized hierarchical product. In fact, the obtained graphs turn out to be subgraphs of the Cartesian product of the corresponding factors. Thus, some well-known properties of this product, such as a good connectivity, reduced mean distance, radius and diameter, simple routing algorithms and some optimal communication protocols, are inherited by the generalized hierarchical product. Besides some of these properties, in this paper we study the spectrum, the existence of Hamiltonian cycles, the chromatic number and index, and the connectivity of the generalized hierarchical product.     

应急管理中车辆受限的生产_库存及配送整合模型

针对突发事件发生后,救灾物资不足、车辆数量及容量有限的情况,本文考虑了制造商生产、包装新的救灾物资,构造了车辆返回制造商需要等待订单完成生产的时间函数,建立了一个生产、库存及配送整合的混合整数规划模型。该模型由原材料供应商、制造商、配送中心及客户需求点四部分构成,以完成原材料的运输、制造商中的订单生产并运送到需求点及配送中心的库存订单运送到需求点的总花费时间最短为目标。本文将模型分为两层子模型进行求解:第一层模型采用改进的遗传算法求解;第二层模型采用隐枚举法求解。最后给出一个具体的案例以验证模型的合理性及算法的有效性。     

不确定环境下再制造生产调度研究

针对再制造过程中存在的再制造件质量状况和加工时间不确定性调度问题,分别采用随机数和三角模糊数表示质量状况和加工时间的不确定性。在满足工序顺序、机器等限制下,将各自带有权重系数的最大完工时间和总成本之和最小值当做目标函数,构造不确定环境下再制造生产调度模糊模型且转换成确定的单目标非线性规划模型。应用多层编码遗传算法求解某个再制造子系统算例得到,决策者对于最大完工时间和总成本的重视程度不同,调度方案不同,其需要根据自身关注的重点做出决策,选择合适的调度方案。并且调度结果会受到决策者消极或积极态度的影响,态度越积极,结果越好,反之,态度越消极,结果越差,从而检验了再制造生产调度模型的正确性。希望为再制造实现产业化,规模化提供相关参考意见。     

Boundary-Value Problems of the Theory of Thin and Nonthin Orthotropic Shells with Account of Nonlinearly Elastic Properties and Low Shear Rigidity of Composite Materials

The basic geometric and physical relations and resolving equations of the theory of thin and nonthin orthotropic composite shells with account of nonlinear properties and low shear rigidity of their materials are presented. They are derived based on two theories, namely the theory of anisotropic shells employing the Timoshenko or Kirchhoff-Love hypothesis and the nonlinear theory of elasticity and plasticity of anisotropic media in combination with the Lagrange variational principle. The procedure and algorithm for the numerical solution of nonlinear (linear) problems are based on the method of successive approximations, the difference-variational method, and the Lagrange multiplier method. Calculations of the stress-strain state for a spherical shell with a circular opening loaded with internal pressure are presented. The effect of transverse shear strains and physical nonlinearity of the material on the distribution of maximum deflections and circumferential stresses in the shell, obtained according to two variants of the shell theories, is studied. A comparison of the results of the problem solution in linear and nonlinear statements with and without account of the shell shear strains is given. The numerical data obtained for thin and nonthin (medium thick) composite shells are analyzed.     

利益相关者视角下公路货运超限超载的对策研究——基于演化博弈模型和仿真分析

为有效遏制公路货运超限超载现象,深化交通执法领域的“放管服”改革,本研究针对运输者、稽查人员和交管部门等利益相关者,建立三方演化博弈模型,研究超限超载运输中各利益主体的决策演化过程,并对稳定策略的演化路径进行仿真分析,比较不同参数组合下不同政策力度的治理效果。研究发现,提高超限超载运输的处罚系数可以明显规范运输者的行为;管理成本越低,监管部门的策略越可能向积极监管的方向演化;三方博弈系统存在两种可能的演化稳定策略,加重对稽查人员消极执法行为的处罚、加大资金设备投入能够提高系统向最优状态演化的概率。     

Organizational implications of systems thinking: Multidimensional modular design

Despite a well recognized systemic principle that parts of an organization are interdependent and the nature of their interaction defines the behavior of the whole, we have stubbornly held to the illusion that each function is more or less self-contained and can be treated independently. For a majority of managers the unidimensional mode of organization based on structurally defined tasks, segmentation and hierarchical coordination of functions seems to be the only acceptable way of organizing the work. A predominant management culture continues to value narrow specialization very dearly and considers any forms of redundancy in the organizational structure as wasteful and inefficient. However, the ability to adapt requires some forms of flexibility and responsiveness, which in turn demands that some degree of redundancy be built into the system.The required level of interaction and flexibility in an organization can be achieved by creating a modular structure embedded in a multidimensional scheme. The resulting mode of organization is capable of redesigning its structure and redefining its functions, so that it can exhibit different behaviors and produce different outcomes in the same or different environments.     

Influence of Multiple Micro Cracks on the Damage Behavior of a Macro-Crack Tip北大核心CSCD

The solution of an infinite plane containing a macro crack and a cluster of micro cracks under uniaxial tensile load was presented based on Muskhelishvili’s complex function method and the stepwise recursive method. The stress field and stress intensity factor K were obtained. Combined with the damage mechanics, damage parameter D of the macro-crack tip and the micro-crack tip under uniaxial tension was redefined, and the influence of different damage zone forms on the damage of the crack tip was analyzed. The results show that, both the chain-distribution and the reverse-chain-distribution micro cracks have an amplifying effect on the macro crack growth, and the damage parameter increases with the decrease of the inclination angle of the micro crack and the reduction of the distance between the macro crack and the micro cracks. For a relatively small inclination angle of the micro crack, the damage parameters of the macro crack and the micro crack heightens, and the damage parameter of the macro crack increases with the micro-crack length. For evenly distributed micro cracks in the continuous damage zone, the micro cracks have an amplifying effect on the macro-crack growth, and the damage parameter of the macro crack increases with the micro-crack number. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

Optimal enlistment age: A cost–benefit analysis and some simulations

Enlistment at the earliest viable age maximizes the country’s wartime army size and thereby the country’s attack-deterrence capacity. Injuries and death generate a loss of quantity and quality of life that reduces the benefit from early-age enlistment. The benefit from any age of recruitment is also affected by the rise and decline of the individual’s military performance and civilian productivity and by the changes in the individual’s adjustment costs over his lifecycle. The simulations of an optimization model incorporating these cost and benefit elements suggest that if the intensity of the rise and decline of the individual’s military performance is sufficiently larger than the intensity of the rise and decline of his civilian productivity, there exists an interior optimal enlistment age that is greater than the commonly practiced 18. In such a case, most of the simulation results are closely scattered around 21 despite large parameter changes.     

Dispersed failure of an anisotropic flywheel

Based on a hereditary damage model of solids, the strength of a cylindrically anisotropic flywheel is calculated. By using a failure criterion, the location and time of initial failure is determined in relation to an anisotropy parameter, for which the ratio of rigidities in the tangential and radial directions is taken. The process of dispersed failure depends on the expansion intensity of the damaged zone. The boundary of the zone is the failure front, whose equations of motion are obtained in the cases of absence and presence of a residual strength for the material behind the failure front. In the second case, the damaged material is modeled by an isotropic elastic medium with considerably reduced values of strength and rigidity characteristics, and variations in the pressure on the failure front are also determined. Graphs of the radial coordinate of failure front as a function of time are constructed and analyzed for different values of the anisotropy parameter, the degree of residual strength and density behind the failure front, and proportions of geometrical sizes of the flywheel. The critical failure times are found. A system of restrictions on the values of mechanical and geometrical parameters is revealed which makes possible the realization of the process of dispersed failure investigated.Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 1, pp. 93–108, January–February, 2005.     

含液体非弹性多孔介质中波传播过程的失稳与逸散性

在基于Biot理论的饱和-非饱和多孔介质的动力-渗流模型中计及流固惯性耦合效应。对单轴应变的一维情况讨论了饱和和非饱和多孔介质中波传播过程的驻值失稳和逸散性,分析了流固粘性耦合,流固惯性耦合,流固混合体的压缩性,孔隙水饱和度,及固体骨架在高应变速率下材料粘弹塑性本构行为等因素的影响。该工作将对克服饱和与非饱和多孔介质在强动荷载下波传播过程的数值求解困难提供理论上的依据和启示。     

企业及市场经营效用函数形式研究

鉴于经营效用是企业制订战略决策和发展策略的重要影响因素,研究其基本效用类型,提出对应的函数形式,并在此基础上提出市场总体的综合经营效用测度方法。企业经营效用由自身经营效用和同业比较效用两部分线性合成,效用变量分别为企业单位盈利指标加权合成值及单位盈利水平与行业平均值的差,效用函数通过原点且单调,因此需将效用理论中对应于各种效用类型的对数函数、指数函数等进行坐标变换、旋转或对称。保守型和冒险型效用在定义域内分别为凹函数和凸函数,共组合为9种效用类型含81种基本函数形式,并给出各效用类型含义、经营特征和定价倾向。以市场份额作为各企业经营效用权重,构建幂平均效用合成模型作为市场总体综合经营效用测度。     

竞争环境下基于双重微分博弈的低碳供应链动态优化与协调

在节能减排背景下考虑制造商低碳生产、零售商宣传竞争的情形,将碳减排量以及商誉作为状态变量,借助微分博弈研究供应链动态优化与协调问题。针对双重边际化效应,通过引入成本共担契约对供应链进行协调。研究表明,引入契约后零售商处的低碳宣传努力水平提高、低碳商誉提升、需求量增加,供应链利润基本达到集中决策水平;随着竞争程度的增加,市场需求量提高,制造商利润增加,供应链整体利润提高,启发供应链企业在决策过程中创造良性竞争环境、形成良性竞争机制。     

环境治理政策的减排、增效与结构优化效果动态评价

为测度环境治理政策波动对产出、减排、要素配置、消费与产业结构的影响及其传导机制,将异质性消费偏好、产出差异性、环境效用和环境损失函数引入E-DSGE模型。政策强度分析发现,技术进步、排污税和消费税政策效果较强,环境控制和治污支出冲击效果较弱。政策效应分析发现,技术进步政策效应最优,能实现增产和减排双重目标,促进要素配置和居民消费、产出与消费结构改进;排污税和政府治污支出政策次优,能实现增产和减排的双赢目标,促进要素供给和产出结构清洁化,不利于消费提升和消费结构优化;环境控制与消费税政策效果最差,以牺牲产出实现减排,不利于要素配置,产出与消费结构改进效果较弱,消费税会抑制居民消费,但消费税政策效果随环境友好型家庭比例提升而加强。