Reactive sensing of gold (III) by coumarin tethered fluorescent probe through alkyne activation

A novel strategy, involving anchoring and un-anchoring of coumarin based fluorophore, has been established for the selective detection of Au³⁺ species. Selective sensing of Gold (Au³⁺) was triggered due to alkynophilicity of gold ions to create lateral fluorescence of a latent fluorophore. The 4-methyl-2-oxo-2H-chromen-7-yl 2-(2-phenylethynyl) benzoate (CEB) probe was synthesized by reacting 7-hydroxy-4-methylcoumarin with iodo-benzoic acid. CEB probe has an absorption at 300 nm and 335 nm which decreases gradually and new absorption appeared at 406 nm due to Au³⁺ promoted ester hydrolysis selectively over other metal ions with great sensitivity, which accompanies a turn on fluorescence change produced by 7-hydroxy coumarin. The principle behind this sensing strategy is activation of triple bond induced uniquely by Au⁺³ ions leading to cascade and delivers active fluorophore. The sensing mechanism was proposed and supported by ¹H NMR, MS and TD-DFT experiments. The density functional theory (DFT) and time dependent density functional theory (TD-DFT) theoretical results of the CEB-probe and Au³⁺ reaction is in good agreement with the experimental results. Additionally, probe could be well incorporated onto the test strips for effective detection of Au^3+.     

A ratiometric fluorescent probe for iron(III) and its application for detection of iron(III) in human blood serum

A simple and versatile ratiometric fluorescent Fe³⁺ detecting system, probe 1, was rationally developed based on the Fe³⁺-mediated deprotection of acetal reaction. Notably, this reaction was firstly employed to design fluorescent Fe³⁺ probe. Upon treatment with Fe³⁺, probe 1 showed ratiometric response, with the fluorescence spectra displaying significant red shift (up to 132 nm) and the emission ratio value (I₅₂₂/I₃₉₀) exhibiting approximately 2362-fold enhancement. In addition, the probe is highly sensitive (with the detection limit of 0.12 μM) and highly selective to Fe³⁺ over other biologically relevant metal ions. The sensing reaction product of the probe with Fe³⁺ was confirmed by NMR spectra and mass spectrometry. TD-DFT calculation has demonstrated that the ratiometric response of probe 1 to Fe³⁺ is due to the regulation of intramolecular charge transfer (ICT) efficiency. Moreover, the practical utility in fluorescence detection of Fe³⁺ in human blood serum was also conducted, and probe 1 represents the first ratiometric fluorescent probe that can be used to monitor Fe³⁺ level in human blood serum. Finally, probe 1 was further employed in living cell imaging with pancreatic cancer cells, in which it displayed low cytotoxicity, satisfactory cell permeability, and selective ratiometric response to Fe³⁺.     

A novel HPQ-based turn-on fluorescent probe for detection of fluoride ions in living cells

2-(2′-Hydroxyphenyl)-4(3H)-quinazolinone (HPQ) has been reported as a precipitating fluorescent molecule with excellent optical properties, such as large Stokes shift and strong fluorescence intensity. HPQF, a novel HPQ-based turn-on probe for localizable detection of fluoride ions, was designed, synthesized and fully characterized by ¹H NMR, ¹³C NMR and HRMS. As a chemogenic fluoride probe, the tert-butyldiphenylsilane moiety of HPQF can be easily cleaved by fluoride. After spontaneous 1,6-elimination, HPQ molecule was generated to emit fluorescence under the excitation light. Further study shows that HPQF exhibited high selectivity and sensitivity for detection of fluoride. In addition, HPQF was utilized for the detection of fluoride in living cells.     

Phenoxazine‐based Near‐infrared Fluorescent Probes for the Specific Detection of Copper (II) Ions in Living Cells

Abstract : It is well known that copper ions play a critical role in various physiological processes. However, a variety of human diseases are tightly correlated with copper overload. Although there are numerous fluorescent probes capable of detecting copper ions, most of them are “turn‐off” probes owing to copper (II) ions fluorescence quenching effect, resulting in poor sensitivity. Herein, a novel “turn‐on” near‐infrared (NIR) fluorescent probe PZ‐N based on phenoxazine was designed and synthesized for the selective detection of copper (II) ions (Cu²⁺). Upon the addition of Cu²⁺, the probe could quickly react with Cu²⁺ and emit strong fluorescence, along with colour change from colourless to obvious blue. Moreover, the probe PZ‐N showed good water solubility, high selectivity, and excellent sensitivity with low limit of detection (1.93 nM) towards copper (II) ions. More importantly, PZ‐N was capable of effectively detecting Cu²⁺ in living cells.     

A New Fluorescence Turn-On Probe for Aluminum(III) with High Selectivity and Sensitivity,and its Application to Bioimaging

The development of novel selective probes with high sensitivity for the detection of Al³⁺ is widely considered an important research goal due to the importance of such probes in medicine, living systems and the environment. Here, we describe a new fluorescent probe, N′-(4-diethylamino-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (1), for Al³⁺. Probe 1 was evaluated in a solution of acetonitrile/water (1:1 v/v). Compared with previously reported probes for Al³⁺, probe 1 can be synthesized easily and in high yield. A Job plot confirmed that probe 1 is able to complex Al³⁺ in a 1:1 ratio, and the binding constant was determined to be 4.25×10⁸ m⁻¹. Moreover, the detection limit was as low as 6.7×10⁻⁹ m, suggesting that probe 1 has a high sensitivity. Common coexistent metal ions, such as K⁺, Co²⁺, Ca²⁺, Ba²⁺, Ni²⁺, Pb²⁺, Hg²⁺, Ce²⁺, Zn²⁺, Cd²⁺, Fe³⁺, showed little or no interference in the detection of Al³⁺ in solution, demonstrating the high selectivity of the probe. Finally, the ability of probe 1 to act as a fluorescent probe for Al³⁺ in living systems was evaluated in Gram-negative bacteria, Escherichia coli, and confocal laser scanning microscopy confirmed its utility. The results of this study suggest that 1 has appropriate properties to be developed for application as a fluorescent probe of Al³⁺ for use in biological studies.     

A colorimetric and fluorescent turn-on chemosensor for Al and its application in bioimaging

The sensing properties of a boron dipyrromethene derivative 1 containing a N,N-(dimethylamino)styryl group at its α-position and an aniline moiety at meso-position were investigated by steady-state UV-vis absorption and fluorescence spectroscopy, which were found to exhibit wavelength ratiometric and large fluorescence enhancement in the presence of Al³⁺ with specific selectivity over other metal ions in aqueous media. Furthermore, confocal fluorescence microscopy experiments demonstrated that 1 could be used as a fluorescent probe for Al³⁺ in living cells.     

An Aurone‐derived Low‐molecular‐weight Fluorescence Probe for the Detection of Hg2+ in Aqueous Solution and Living Cells

A low‐molecular‐weight fluorescent probe 1 (M.W. = 238.24) based on aurone was synthesized, and its application in fluorescent detection of Hg²⁺ in aqueous solution and living cells was reported. It exhibited an “on–off” fluorescent response toward Hg²⁺ in aqueous solution. Both the color and fluorescence changes of the probe were remarkably specific for Hg²⁺ in the presence of other common metal ions, satisfying the selective requirements for biomedical and environmental monitoring application. The probe has been applied in direct measurement of Hg²⁺ content in river water samples and imaging of Hg²⁺ in living cells, which further indicates the potential application values in environmental and biological systems.     

A fluorescent probe based on N-butylbenzene-1,2-diamine for Cu(II) and its imaging in living cells

A fluorescent probe LZ-N with naphthalimide as fluorophore and N-butylbenzene-1,2-diamine as a new recognition moiety for copper ion was designed and synthesized. The probe LZ-N exhibits high selectivity for Cu²⁺ ion in aqueous media (CH₃CN:H₂O = 1:1) over all the other metal ions in our study, more than 20-fold fluorescence enhancement by coordinating with Cu²⁺, and the maximum emission intensity independence in the range of pH 2.06–9.25. The results of ¹H-NMR titration, time-resolved fluorescence decay measurement, and computational optimization illuminate the mechanisms of Cu²⁺ and probe LZ-N. Confocal fluorescence images and cell viability values test show the high fluorescence enhancement of probe LZ-N for exogenous Cu²⁺ in living cells.     

A novel rhodamine-based turn-on probe for fluorescent detection of Au3+ and colorimetric detection of Cu2+

In this work, we design and synthesize the novel probe RC through introduction the 1-aza-4,13-dithia-15-crown-5 ring into the structure of rhodamine 6G hydrazide, where the N atom of crown ring is responsible for quenching of rhodamine fluorescence. The compound obtained behaves as multifunctional cation sensor providing selective fluorescent response to Au³⁺ and selective colorimetric response to Cu²⁺ ions in aqueous acetonitrile (1/1, v/v) at pH 7.0. The use of 10^?5?M RC solution allowed reliable determination of target cations in the presence of a wide range of environmentally relevant ions with detection limits of 2?×?10^?6?M and 5?×?10^?7?M for gold and copper, respectively.     

Highly selective chromogenic and fluorogenic probe based on benzothiazole-thiosemicarbazone Schiff base for detection of copper (II) in real samples

Copper is the third most abundant essential transition metal ion in the human body. It's responsible for important activities in many living things, but excessive intake of Cu²⁺ can lead to a range of diseases. A colorimetric and turn-off fluorescent probe (E)-2-(5-(benzothiazol-2-yl)-2-(diethylamino)-4-hydroxybenzylidene)-N-phenylhydrazine-1-carbothioamide ( ZTR ) was designed and synthesized by thiosemicarbazone Schiff base as a specific complexes site strategy to achieve highly specific Cu²⁺ detection. The fluorescence of the probe ZTR solution fell dramatically when Cu²⁺ was added, and its appearance changed from dazzling blue to nearly colorless. The simple structure and readily available fluorescent probe provide a novel approach for the quantitative detection of Cu²⁺ in the linear range from 0 to 0.12 μM, with a detection limit down to 16 nM, and with high selectivity for Cu²⁺ over 15 other metal ions. Job’s plot analysis showed that probe ZTR and Cu²⁺ formed a 1:1 coordination complex. In addition, because of its low detection limits and fast response time, the created fluorescent molecule was effectively used to study the target ions on test paper strips and in water samples.))     

A highly sensitive and selective fluorescent probe for trivalent aluminum ion based on rhodamine derivative in living cells

A rhodamine spirolactam derivative (1) is developed as a colormetric and fluorescent probe for trivalent aluminum ions (Al³⁺). It exhibits a highly sensitive “turn-on” fluorescent response toward Al³⁺ with a 70-fold fluorescence intensity enhancement under 2 equiv. of Al³⁺ added. The probe can be applied to the quantification of Al³⁺ with a linear range covering from 5.0 × 10⁻⁷ to 2.0 × 10⁻⁵ M and a detection limit of 4.0 × 10⁻⁸ M. Most importantly, the fluorescence changes of the probe are remarkably specific for Al³⁺ in the presence of other metal ions, which meet the selective requirements for practical application. Moreover, the experiment results show that the response behavior of 1 towards Al³⁺ is pH independent in neutral condition (pH 6.0–8.0) and the response of the probe is fast (response time less than 3 min). In addition, the proposed probe has been used to detect Al³⁺ in water samples and image Al³⁺ in living cells with satisfying results.     

A fluorescent sensor based on quinazoline ketone derivatives for selectivity of Fe3+

In this work, we provided a fluorescent sensor based on a compound containing fluorophore quinazoline ketone for detecting metal ions. 2-Methyl-4(3 H)-quinazoline thione was synthesised as a fluorescent probe for tervalent ferric ion (Fe³⁺) detection. Fluorescent determination of 2-methyl-4(3 H)-quinazoline thione indicated its maximum emission wavelength of 306.5 nm. The fluorescence interference and titration experiments have shown that the compound has a high selective fluorescence response to Fe³⁺. With an increase in the Fe³⁺ ion concentration, the fluorescence emission strength gradually weakened, and a slight red shift appeared. With Job’s method, 2-methyl-4(3 H)-quinazoline thione was proved to form a 1:2 complex with Fe³⁺. The results revealed that 2-methyl-4(3 H)-quinazoline thione could be used as a fluorescent probe for the recognition of Fe³⁺ with high selectivity.     

Imaging mass spectrometry of gold nanoparticles in a tissue section as an immunohistochemical staining mass probe

For analysis of low abundance peptides in a tissue section, immunohistochemical staining through antibody‐antigen interaction is a usual technique. The antibody is conjugated with a probe moiety that aids in highly sensitive detection. Gold nanoparticles, which show excellent chemical stability and variation of surface modifications, are expected to act as a sensitive mass probe to desorb gold ions (Au⁺, Au₂⁺, Au₃⁺) that are distinguishable from fragment ions from organic molecules. Here, green fluorescent proteins (GFP) in a tissue section of a transgenic zebrafish were detected by the gold mass probe conjugated with antibodies. Due to the efficient ionization and desorption of gold ions, imaging mass spectrometry of Au₂⁺ ions indicated the distribution of gold nanoparticles stained in a tissue section, and the mass signal distribution was consistent with the area where the GFP‐expressing cells were distributed. Conventional immunofluorescence techniques showed intense autofluorescence that come from intrinsic fluorophores in the tissue section. In contrast, the gold nanoparticles acted as an immunostaining mass probe that displayed significantly lower background signals.     

Aminoquinoline based highly sensitive fluorescent sensor for lead(II) and aluminum(III) and its application in live cell imaging

We have synthesized a new probe 5-((anthracen-9-ylmethylene) amino)quinolin-10-ol (ANQ) based on anthracene platform. The probe was tested for its sensing behavior toward heavy metal ions Hg²⁺, Pb²⁺, light metal Al³⁺ ion, alkali, alkaline earth, and transition metal ions by UV–visible and fluorescent techniques in ACN/H₂O mixture buffered with HEPES (pH 7.4). It shows high selectivity toward sensing Pb²⁺/Al³⁺ metal ions. Importantly, 10-fold and 5- fold fluorescence enhancement at 429 nm was observed for probe upon complexation with Pb²⁺ and Al³⁺ ions, respectively. This fluorescence enhancement is attributable to the prevention of photoinduced electron transfer. The photonic studies indicate that the probe can be adopted as a sensitive fluorescent chemosensor for Pb²⁺ and Al³⁺ ions.     

A highly selective fluorescent probe for nanomolar detection of ferric ions in the living cells and aqueous media

A dipodal fluorescent probe 3, with imine and hydroxyl moieties as binding sites, has been synthesized and characterized with spectroscopic methods, single-crystal X-ray techniques, and DFT. The synthesized probe 3 (φ = 0.0028) showed highly sensitive and highly specific fluorescent ‘turn-on’ effect (λ_em = 453 nm) for the 1:1 binding with Fe³⁺ ions to form probe 3.Fe³⁺ complex (φ = 0.203) in semi-aqueous medium (acetonitrile:water (50:50; v/v)) and live cells. The 1:1 binding stoichiometry of probe 3 and Fe³⁺ ions was proposed by DFT calculations and confirmed by the NMR spectroscopy, crystal structures of probe 3 and 3.Fe³⁺ complex, and mass spectrum of probe 3.Fe³⁺ complex. The stability of probe 3.Fe³⁺ complex in a wide pH range (pH 2–12) and reversibility for binding with Fe³⁺ ions in the presence of EDTA indicates that it can be an effective chemosensor for the detection of Fe³⁺ ions in various samples, including living cells. Importantly, with the LOD of 21.5 nM for the detection of Fe³⁺ ions, probe 3 did not show any interference from potentially competing ions even at a 1:3 ratio, indicates its biocompatibility. The nanomolar limit of detection (21.5 nM), cell permeability, and low cytotoxicity allows the probe 3 to be an excellent tool for the live-cell imaging and detection of ferric ions in live cells.     

2-(2′-Hydroxyphenyl)-4(3H)-quinazolinone derivatives based fluorescent probes for mercury(II) via an intramolecular proton transfer mechanism

2-(2′,5′-Dihydroxy-phenyl)-4(3H)-quinazolinone (DHPQ), a new fluorescent dye that exhibits excited state intramolecular proton transfer (ESIPT) reaction and possesses good photophysical properties, is synthesised and used as fluorescent probe for detection of Hg²⁺. Mercuric ions can be detected and quantitated by measuring the fluorescent intensity decrease of the probe. The decrease of fluorescence intensity of DHPQ upon the addition of Hg²⁺ was attributed to the blocking of ESIPT reactions of DHPQ and quenching its fluorescence. The analytical performance characteristics of the proposed Hg²⁺ probe were investigated. The probe can be applied to the quantification of Hg²⁺ with a concentration range covering from 8.0?×?10^?7 to 2.0?×?10^?4?mol?L^?1, with a working pH range of 5.5–6.5. It shows excellent selectivity for Hg²⁺ over other transition metal cations. The proposed method was testified for the Hg²⁺ assay in river water samples with satisfying recoveries.     

A highly sensitive naphthalimide-based fluorescent probe for detection of Cu2+ via selective hydrolysis reaction and its application in practical samples

A novel fluorescent probe CN3, containing 1,8-naphthalimide and picolinate units, was synthesized, and its structure was characterized by ¹H nuclear magnetic resonance spectroscopy (H NMR), ¹³C nuclear magnetic resonance spectroscopy (C NMR), and mass spectroscopy techniques. The detection property of CN3 toward copper ions (Cu²⁺) has been investigated in ethanol–HEPES buffer (v/v = 1/1, pH = 7.40) solution by UV–Vis absorption and fluorescence emission spectra. The results showed that CN3 had a highly selective and sensitive fluorescence quenching response to Cu²⁺, which was attributed to the generation of weak fluorescent N-ethyl-4-hydroxyphenyl-1,8- naphthalimide (compound 2) in polar ethanol–HEPES buffer (v/v = 1/1, pH = 7.40) via selective hydrolysis reaction. The detection of CN3 for Cu²⁺ was not influenced in the presence of other competing metal ions, and the limit of detection was as low as 50.0 nM. Therefore, the color of CN3 changed from colorless to yellowish when the Cu²⁺ was added. Furthermore, the fluorescent probe CN3 was utilized to detect Cu²⁺ in real water samples with fine performance.     

A Naphthalimide-Based Fluorescent Probe for the Detection and Imaging of Mercury Ions in Living Cells

The selective and efficient monitoring of mercury (Hg²⁺) contamination found in the environment and ecosystem has been carried out. Thus, a new 1,8-naphthalimide-based fluorescent probe NADP for the detection of Hg²⁺ based on a fluorescence enhancement strategy has been designed and synthesized. The NADP probe can detect Hg²⁺ with high selectivity and sensitivity and a low detection limit of 13 nm . The detection mechanism was based on a Hg²⁺-triggered deprotection reaction, resulting in a dramatic change in fluorescence from colorless to green at physiological pH. Most importantly, biological investigation has shown that the NADP probe can be successfully applied to the monitoring of Hg²⁺ in living cells and zebrafish with low cytotoxicity.     

Carbazole-based Schiff base: A sensitive fluorescent ‘turn-on’ chemosensor for recognition of Al(III) ions in aqueous-alcohol media

Carbazole-based Schiff base chemosensor was synthesized in one-pot synthesis using 2-hydroxy-1-naphtaldehyde for fluorescent sensing of Al³⁺ ions. Characterization of the ligand (L) was revealed through spectroscopic and physicochemical techniques. The fluorescence emission responses of L to various metal ions and anions were investigated. The chelation was studied by UV–vis, ¹H NMR, LC-MS/MS, fluorescence titration and Job’s plot analysis. Bathochromic shift resulted from charge transfer from L to electrophilic Al³⁺ ion was observed in the chelation of L with Al³⁺. The potentiality of L to be a distinguished probe to detect Al³⁺ ions was due to a chelation enhanced fluorescence (CHEF) effect, concomitant with noticeable fluorescent enhancement. A significant fluorescence enhancement at 533 nm was observed in ethanol–water (1:1, v/v) solution upon addition of Al³⁺ along with a distinct color change from yellow to white. Non-fluorescent ligand exposed highly sensitive turn-on fluorescent sensor behavior for selectively sensing Al³⁺ ions via 1:1 (ligand:metal) stoichiometry. The ligand’s specificity in the existence of other tested metal ions and anions indicated no observation in color change. The ligand-Al³⁺ complex formation was reversible upon addition of chelating agent EDTA. The ligand interacted with Al³⁺ ions with an association constant of K_a = 5 × 10⁴ M^?1. The limit of detection (LOD) was found to be 2.59 × 10^-7 M. The synthesized Schiff base could efficiently detect Al³⁺ ions as a fluorescent sensor.