Growth mechanism and optical property of CdS nanoparticles synthesized using amino-acid histidine as chelating agent under sonochemical process

Using amino-acid histidine as chelating agent, CdS nanoparticles have been synthesized by sonochemical method. It is found that by varying the ultrasonic irradiation time, we can tune the band gap and particle size of CdS nanoparticles. The imidazole ring of histidine captures the Cd ions from the solution, and prevents the growth of the CdS nanoparticles. The deviation in the linear relation in between cube of radius of nanoparticles and ultrasonic irradiation time confirms the growth of CdS nanoparticles occur via two process; one is the diffusion process of the reactants as well as reaction at the surface of the crystallite. CdS nanoparticles synthesized using histidine as organic chelating agent have band edge emission at 481 nm and have greater photoluminescence intensity with blue-shift to higher energy due to typical quantum confinement effect.     

Room temperature synthesis of needle-shaped ZnO nanorods via sonochemical method

Single crystalline needle-shaped zinc oxide nanorods were synthesized via sonochemical methods using zinc acetate dihydrate and sodium hydroxide at room temperature. Morphological investigation revealed that the nanoneedles are of hexagonal surfaces along the length. The typical diameter and length vary from 120 to 160 nm and 3 to 5 μm, respectively. Sonication time appears to be a critical parameter for the shape determination. Detailed structural characterization confirmed that the nanorods are single crystalline with wurtzite hexagonal phase. A standard peak of zinc oxide was observed at 520 cm⁻¹ from the Fourier transform infrared spectroscopy. The ultra-violet visible and room temperature photoluminescence (PL) spectroscopic results demonstrate that the synthesized material has good optical properties.     

Growth mechanism and photoluminescence property of flower-like ZnO nanostructures synthesized by starch-assisted sonochemical method

Flower-like ZnO nanostructures have been synthesized by starch-assisted sonochemical method and the effect of starch and ultrasound on the formation of ZnO nanostructure has been investigated. It is observed that starch and ultrasonic wave both plays a vital role on the growth of ZnO nanostructure. X-ray diffraction (XRD) pattern indicated that the synthesized flower-like ZnO nanostructures were hexagonal. FTIR spectrum confirms the presence of starch on the surface of flower-like ZnO nanostructure. The photoluminescence spectrum of flower-like ZnO nanostructure consists of band-edge emission at 393 nm as well as emission peaks due to defects. On the basis of structural information provided by X-ray diffraction (XRD) and morphological information by Scanning Electron Microscopy (SEM), a growth mechanism is proposed for formation of flower-like ZnO nanostructures. Differential Scanning Calorimetry (DSC) of starch in liquid medium confirms that gelatinization is a two step process involving two phases.     

Template-free sonochemical synthesis of flower-like ZnO nanostructures

Flower-like ZnO nanostructures have been successfully synthesized via a facile and template-free sonochemical method, using zinc acetate and potassium hydroxide as reactants only. The as-synthesized flower-like ZnO nanostructures were composed of nanorods with the width of ∼300–400 nm$\sim 300\text{–}400\text{nm}$ and the length of ∼2–3 μm$\sim 2\text{–}3\text{μm}$. The structures, morphologies and optical properties of the as-prepared products were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscopy, UV-Vis spectrophotometry and Raman-scattering spectroscopy. A plausible formation mechanism of flower-like ZnO nanostructures was studied by SEM which monitors an intermediate morphology transformation of the product at the different ultrasonic time (t=80,90,95,105, and 120 min$t=80,90,95,105\text{, and}120\text{min}$).     

Structural and optical properties of the S-doped ZnO particles synthesized by hydrothermal method

Sulfur-doped ZnO particles have been synthesized by hydrothermal method. The structural and optical properties were studied systematically by XRD, scanning electron microscopy (SEM), and photoluminescence. SEM results show that the particle is hexagonal and the average size decreases with increasing sulfur doping, which means a retardant effect of sulfur on the growth of S-doped ZnO. XRD results show that the lattice parameters increase with more sulfur, which means an effective sulfur doping and increasing strain. Optical characterization also shows that the effective sulfur doping will enhance the green emission and suppress the near bandgap emissions.     

Sonochemical synthesis, photocatalytic activity and optical properties of silica coated ZnO nanoparticles

In this paper, we report the synthesis of silica coated ZnO nanoparticles by ultrasound irradiation of a mixture of dispersion of ZnO, tetraethoxysilane (TEOS), and ammonia in an ethanol-water solution medium. The silica coating layer formed at the initial TEOS/ZnO loading of 0.8 for 60 min ultrasonic irradiation was uniform and extended up to 3 nm from the ZnO surface as revealed from HR-TEM images. Silica coated ZnO nanoparticles demonstrated a significant inhibition of photocatalytic activity against photodegradation of methylene blue dye in aqueous solution. The effects of silica coating on the UV blocking property of ZnO nanoparticles were also studied.     

Characterization and optical property of ZnO nano-, submicro- and microrods synthesized by hydrothermal method on a large-scale

In the present paper, well-dispersed ZnO nano-, submicro- and microrods with hexagonal structure were synthesized by a simple low temperature hydrothermal process from zinc nitrate hexahydrate without using any additional surfactant, organic solvent or catalytic agent. The phase and structural analysis were carried out by X-ray diffraction (XRD), the morphological analysis was carried out by field emission scanning electron microscopy (FESEM) and the optical property was characterized by room-temperature photoluminescence (PL) spectroscopy. The results revealed the high crystal quality of ZnO powder with hexagonal (wurtzite-type) crystal structure and the formation of well-dispersed ZnO nano-, submicro- and microrods with diameters of about 50, 200 and 500 nm, and lengths of 300 nm, 1 μm and 2 μm, respectively, on a large-scale just using the different temperatures. Room-temperature PL spectrum from the ZnO nanorods reveals a strong UV emission peak at about 360 nm and no green emission band at ∼530 nm. The strong UV photoluminescence indicates the good crystallization quality of the ZnO nanorods. Room-temperature PL spectra from the ZnO submicro- and microrods reveal a weak UV emission peak at ∼400 nm and a very strong visible green emission at 530 nm, that is ascribed to the transition between V_oZn_i and valence band.     

Quantum confinement effect in ZnO nanoparticles synthesized by co-precipitate method

Quantum mechanical effects such as an increased bandgap of semiconductors with reduction of size are viewed as having strong potential for future applications. In the present work, zinc oxide (ZnO) nanoparticles (NPs) were synthesized via the co-precipitate method. Very narrow particle size distribution of the ZnO nanoparticles was achieved through careful control of the synthesis conditions. The structural, morphological, and optical characterization was carried out using X-ray diffraction, atomic force microscopy, and UV–vis reflectance techniques, respectively. The results indicated that increasing the temperature from 60 to 65 °C caused a subsequent increase in particle size from 4 to 12 nm. An associated increase in bandgap with decrease in particle size was also noticed which is a strong indication of the quantum confinement effect.     

Sonocatalytic degradation of a textile dye over Gd-doped ZnO nanoparticles synthesized through sonochemical process

The present study was performed to sonochemically synthesize Gd_xZn_1 − xO (x = 0–0.1) nanoparticles for sonocatalysis of Acid Orange 7 (AO7) in an aqueous medium. The results of X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) analysis confirmed proper synthesis of Gd-doped sonocatalyst. 5% Gd-doped ZnO nanoparticles with band gap of 2.8 eV exhibited the highest sonocatalytic decolorization efficiency of 90% at reaction time of 90 min. The effects of initial dye concentration and sonocatalyst dosage on decolorization efficiency were evaluated. In the presence of sodium sulfate, sodium carbonate and sodium chloride the decolorization efficiency decreased from 90 to 78, 65 and 56%, respectively. Among various enhancers, the addition of potassium periodate improved the decolorization efficiency from 90 to 100%. The highest decolorization efficiency was obtained at pH value of 6.34 (90%). The decolorization efficiency decreased only 6% after 4 repeated runs. Therefore, Gd-doped ZnO nanoparticles can be used as a promising catalyst for degradation of organic pollutants with great reusability potential.     

Microstructure and optical properties of ZnO nanoparticles prepared by a simple method

In this investigation, ZnO nanoparticles were prepared by a simple and rapid method. This method is based on the short time solid state milling and calcinations of zinc acetate and citric acid powders. The samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, photoluminescence and UV-vis spectroscopy. It was shown that the calcination temperature significantly affected the particle size and optical properties of the synthesized ZnO nanoparticles. Calculation based on the XRD data shows that the average sizes of ZnO particles are in agreement with those from TEM images and the size of the particles increases on increasing the calcination temperature. Also the band gap of samples decreased from 3.29 to 3.23 eV on increasing the calcination temperature from 350 to 600 °C. Photoluminescence analyses show that many defects such as interstitial zinc, zinc vacancy and oxygen vacancy are responsible for the observed optical properties.     

Ag-doped ZnO nanorods synthesized by two-step method

A two-step method is adopted to synthesize Ag-doped ZnO nanorods.A ZnO seed layer is first prepared on a glass substrate by thermal decomposition of zinc acetate.Ag-doped ZnO nanorods are then assembled on the ZnO seed layer using the hydrothermal method.The influences of the molar percentage of Ag ions to Zn ions(RAg/Zn) on the structural and optical properties of the ZnO nanorods obtained are carefully studied using X-ray diffractometry,scanning electron microscopy and spectrophotometry.Results indicate that Ag ions enter into the crystal lattice through the substitution of Zn ions.The<002>c-axis-preferred orientation of the ZnO nanorods decreases as RAg/Zn increases.At RAg/Zn >1.0%,ZnO nanorods lose their c-axis-preferred orientation and generate Ag precipitates from the ZnO crystal lattice.The average transmissivity in the visible region first increases and then decreases as R Ag/Zn increases.The absorption edge is first blue shifted and then red shifted.The influence of Ag doping on the average head face,and axial dimensions of the ZnO nanorods may be optimized to improve the average transmissivity at RAg/Zn <1.0%.     

Growth and optical properties of ZnO microwells by chemical vapor deposition method

The well-like ZnO nanostructures were obtained by chemical vapor deposition method. The uniform and dense ZnO slim nano-columns were grown along the circle to form a microwell. The growth mechanisms, such as 1D linear, 2D screw dislocation and step growth are discussed. These observations provide some insight into the growth kinetics in vapor-solid growth process. The fabrication of ZnO microwell morphology provided a direct experimental evidence for explaining the 1D growth mechanism based on the axial screw dislocation. Photoluminescence (PL) microscopy showed the surface-related optical properties. The green light emission enhancement revealed that the ZnO microwells have waveguide properties. The abnormal enhancement of integrated PL intensity of deep-level emission with temperature increase showed abundant surface state existence.     

掺Ti对ZnO纳米颗粒的微观结构与光学特性的影响

本研究利用溶胶凝胶法制备了Ti_xZn_(1-x)O纳米粒子,并且分析了Ti掺杂对ZnO纳米粒子晶体结构与光学特性的影响.微观结构分析得知Ti掺杂会使ZnO结晶较差,晶格常数与压缩应力增大,但可使晶粒缩小至5 nm左右.光致发光(PL)光谱分析得出Ti掺杂会造成氧空位缺陷减少,近带边发光(NBE)峰值蓝移,但NBE峰值强度增幅变化却不大.拉曼光谱分析表明Ti_xZn_(1-x)O的结晶品质不佳且NBE峰值强度的增幅未完全依循多声子模态信号减弱而增强的规律,其原因是NBE峰值强度除受多声子模态信号影响外还受其它因素的影响.TC(002)值越高时样品的多声子模态信号会越弱,而NBE峰值强度增幅越大.     

固相反应法制备Co掺杂ZnO的磁性和光学性能研究

研究了以固相反应法制备Co掺杂ZnO粉体的磁性和光学性能，测试结果表明对于均匀掺杂的Zn_0.95Co_0.05O粉体，Co²⁺随机取代Zn²⁺的位置进入ZnO晶格.Co²⁺之间的3d自旋电子耦合交换作用使得近邻的Co²⁺自旋反平行，Zn_0.95Co_0.05O粉体在3—300K表现为顺磁性，而非铁磁性. 关键词： ZnO 固相反应 稀磁半导体 顺磁性     

Characterization of undoped and Co doped ZnO nanoparticles synthesized by DC thermal plasma method

ZnO nanopowders doped with 5 and 10 at% cobalt were synthesized and their antibacterial activity was studied. Cobalt doped ZnO powders were prepared using dc thermal plasma method. Crystal structure and grain size of the particles were characterized by X-ray diffractometry and optical properties were studied using UV-vis spectroscopy. The particle size and morphology was observed by SEM and HRTEM, revealing rod like morphology. The antibacterial activity of undoped ZnO and cobalt doped ZnO nanoparticles against a Gram-negative bacterium Escherichia coli and a Gram-positive bacterium Bacillus atrophaeus was investigated. Undoped ZnO and cobalt doped ZnO exhibited antibacterial activity against both E. coli and Staphylococcus aureus but it was considerably more effective in the cobalt doped ZnO.     

Electrical and optical properties of Sb-doped ZnO thin films synthesized by sol–gel method

Sb-doped ZnO thin films with different values of Sb content （from 0 to 1.1 at.%） are deposited by the sol-gel dip- coating method under different sol concentrations. The effects of Sb-doping content, sol concentration, and annealing ambient on the structural, optical, and electrical properties of ZnO films are investigated. The results of the X-ray diffraction and ultraviolet-visible spectroscopy （UV-VIS） spectrophotometer indicate that each of all the films retains the wurtzite ZnO structure and possesses a preferred orientation along the c axis, with high transmittance （〉 90%） in the visible range. The Hall effect measurements show that the vacuum annealed thin films synthesized in the sol concentration of 0.75 mol/L each have an adjustable n-type electrical conductivity by varying Sb-doping density, and the photoluminescence （PL） spectra revealed that the defect emission （around 450 nm） is predominant. However, the thin films prepared by the sol with a concentration of 0.25 mol/L, despite their poor conductivity, have priority in ultraviolet emission, and the PL peak position shows first a blue-shift and then a red-shift with the increase of the Sb doping content.     

Eu-doped ZnO nanoparticles: Sonochemical synthesis,characterization, and sonocatalytic application

Undoped and europium (III)-doped ZnO nanoparticles were prepared by a sonochemical method. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) analysis. The crystalline sizes of undoped and 3% Eu-doped ZnO were found to be 16.04 and 8.22 nm, respectively. The particle size of Eu-doped ZnO nanoparticles was much smaller than that of pure ZnO. The synthesized nanocatalysts were used for the sonocatalytic degradation of Acid Red 17. Among the Eu-doped ZnO catalysts, 3% Eu-doped ZnO nanoparticles showed the highest sonocatalytic activity. The effects of various parameters such as catalyst loading, initial dye concentration, pH, ultrasonic power, the effect of oxidizing agents, and the presence of anions were investigated. The produced intermediates of the sonocatalytic process were monitored by GC–Mass (GC–MS) spectrometry.     

Optimization of sonochemical method of functionalizing Amino-Silane on superparamagnetic iron oxide nanoparticles using Central Composite Design

Optimization of sonochemical method of functionalizing a Silane coupling agent, Amino-Silane on Superparamagnetic Iron Oxide Nanoparticles (SPION) using Central Composite Design is reported. The Amino-Silane is grafted on the SPION in an iced bath environment using a Vibra-Cell 20 kHz ultrasonic irradiator with 13 mm diameter horn. Throughout the experiment amplitude of the ultrasonic device is maintained at 47%. The percentage atomic compositions of various APTES elements which bind to the SPION due to the ultrasonic irradiation were determined using X-ray photoelectron spectrometer (XPS). The influence of ultrasonic irradiation time and amount of APTES required for facile, rapid and effective functionalization of Organo-metallic compound on SPION are optimized. The optimized sonication time and amount of APTES are 8.49 min and 3.40 ml, respectively. The predicted results were validated with experimental data. Using the optimized values APTES were functionalized on the SPION experimentally and the results were compared. The experimental results validate the predicted data. Results show that very minimum sonication time is required for effective grafting of APTES on SPION.     

Research on the removal of near-well blockage caused by asphaltene deposition using sonochemical method

Near-well blockage caused by asphaltene deposition often occurs during the process of crude oil exploitation. It can reduce the porosity and permeability of reservoirs and seriously affects the migration and exploitation of oil and gas. In this paper, removing near-well blockage caused by asphaltene deposition using sonochemical method is investigated. Six PTZ transducers with different parameters are used to study the deplugging effect. Results show that the optimal ultrasonic frequency and power for plugging removal are 20 kHz and 1000 W respectively. it is found that lower ultrasonic frequency is good for asphaltene deposition plug removal when ultrasonic power is constant; as the power of the sensor increases, the effect of removing the asphaltene deposition plug gets better, ultrasonic power can well make up for the attenuation of ultrasonic energy caused as frequency increases; the effects of removing asphaltene deposition plug for the three cores with different initial gas logging permeability all get worse no matter what type of transducer is used; the effect of asphaltene deposition plug removal for the three cores samples all become better and then tend to be stable as ultrasonic treatment time increases further; considering of reducing construction cost and oil reservoir protection, ultrasonic processing has a lot of unexampled advantages compared with chemical injection, such as good adaptability, low cost, simple operation, non-pollution and benefit for the sustainable development of oil field; affected by the synergistic effect of ultrasonic and chemical agents, the combined treatment effect of ultrasound and chemical agents is significantly better than using ultrasound or chemical agents alone.     

ZnO nanoparticles obtained by mechanochemical technique and the optical properties

Crystalline ZnO nanoparticles were synthesized by mechanochemical method. Mechanochemical processing involves the mechanical activation of solid-state displacement reactions at low temperatures in a ball mill. Statistical design was used to investigate the effect of main parameters (i.e. time, milling rate and calcination temperature) on ZnO crystallite size and morphology. After annealing at 400 °C in air, zinc oxide (ZnO) nanoparticles were obtained. The milled powders are analyzed by X-ray diffraction (XRD), TG/DTA and transmission electron microscope (TEM).The crystallite size of ZnO samples calculated from XRD is consistent with the TEM images and estimated to be less than 20 nm. The optical properties of the samples were studied by UV-vis spectrophotometer.