Open‐access microcavities are emerging as a new approach to confine and engineer light at mode volumes down to the λ3 regime. They offer direct access to a highly confined electromagnetic field while maintaining tunability of the system and flexibility for coupling to a range of matter systems. This article presents a study of coupled cavities, for which the substrates are produced using Focused Ion Beam milling. Based on experimental and theoretical investigation the engineering of the coupling between two microcavities with radius of curvature of 6 m is demonstrated. Details are provided by studying the evolution of spectral, spatial and polarisation properties through the transition from isolated to coupled cavities. Normal mode splittings up to 20 meV are observed for total mode volumes around . This work is of importance for future development of lab‐on‐a‐chip sensors and photonic open‐access devices ranging from polariton systems to quantum simulators.
Two hundred years after Malus' discovery of optical anisotropy, the study of polarization‐driven optical effects is as active as ever, generating interest in new phenomena and potential applications. However, in ultrafast optics, the influence of polarization is frequently overlooked being considered as either detrimental or negligible. Here we demonstrate that spatio‐temporal couplings, which are inherent for ultrafast laser systems with chirped‐pulse amplification, accumulate in multi‐pulse irradiation and lead to a strongly anisotropic light‐matter interaction. Our results identify angular dispersion in the focus as the origin for the polarization dependence in modification, yielding an increase in modification strength. With tight focusing (NA ≥ ∼0.4), this non‐paraxial effect leads to a manifestation of spatio‐temporal couplings in photo‐induced modification. We devise a practical way to control the polarization dependence and exploit it as a new degree of freedom in tailoring laser‐induced modification in transparent material. A near‐focus, non‐paraxial field structure analysis of an optical beam provides insight on the origin of the polarization dependent modification. However, single pulse non‐paraxial corrected calculations are not sufficient to explain the phenomena confirming the experimental observations and exemplifying the need for multi‐pulse analysis.
We demonstrate a high optoelectronic performance and application potential of our random network, with subwavelength diameter, ultralong, and high‐quality silver nanowires, stabilized on a substrate with a UV binder. Our networks show very good optoelectronic properties, with the single best figure of merit of ∼1686, and excellent stability under harsh mechanical strain, as well as thermal, and chemical challenge. Our network transparency strongly exceeds the simple shading limit. We show that this transmission enhancement is due to plasmonic refraction, which in an effective medium picture involves localized plasmons, and identify the inhomogeneous broadening as the key factor in promoting this mechanism. Such networks could become a basis for a next generation of ultrahigh‐performance transparent conductors.
The fundamental formation process of nanogratings induced by focused ultrashort laser pulses inside the bulk of transparent materials is still object of intense debate. In particular the initial evolutionary steps, including the formation of anisotropic pores, alignment and arrangement in highly periodic grating planes could not been clarified up to now. To this end we have performed a comprehensive investigation of this process by optical retardance measurements, small‐angle X‐ray scattering, and focused ion beam milling in combination with scanning electron microscopy. The results show that the formation of nanogratings starts with isotropic, deterministic voids after the first incident laser pulse which start to elongate perpendicular to the laser scan direction with further illumination and the appearance of cracks along the scan direction. For increasing pulse overlap these cracks as well as randomly aligned voids build the template for the subsequent pore growth perpendicular to the laser polarization. The process of grating formation and subsequent period reduction occurs via increasing number of sheets and mutual realignment forming a more porous glass matrix.
This article presents a novel III‐V on silicon laser. This work exploits the phenomenon that a passive silicon cavity, side‐coupled to a III‐V waveguide, will provide high and narrow‐band reflectivity into the III‐V waveguide: the resonant mirror. This results in an electrically pumped laser with a threshold current of 4 mA and a side‐mode suppression ratio up to 48 dB.
Plasmonic waveguides are promising in many applications because of their subwavelength field confinement, which can strongly enhance light‐matter interactions. Nevertheless, how to efficiently evaluate their Kerr nonlinear performance is still an open question because of the presence of relatively large linear losses. Here a simple and versatile figure of merit (FOM) is proposed for Kerr nonlinear waveguides with linear losses. To derive the FOM, a generalized full‐vectorial nonlinear Schrödinger equation governing nonlinear pulse propagation in a lossy waveguide is developed, and an approximate analytic solution of the degenerate four wave mixing conversion efficiency is derived and validated. The effectiveness of the FOM is verified with an all‐plasmonic and a hybrid‐plasmonic waveguide configuration. Rigorous results show that the optimal waveguide length for the highest conversion efficiency is ln 3 times the attenuation length. At this length, the upper limits of the conversion efficiency and the nonlinear phase shift are determined by the FOM. These results provide fundamental theory and useful guidance in exploring plasmonic waveguides for nonlinear optical applications.
The broadband enhancement of single‑photon emission from nitrogen‐vacancy centers in nanodiamonds coupled to a planar multilayer metamaterial with hyperbolic dispersion is studied experimentally. The metamaterial is fabricated as an epitaxial metal/dielectric superlattice consisting of CMOS‐compatible ceramics: titanium nitride (TiN) and aluminum scandium nitride (AlxSc1‐xN). It is demonstrated that employing the metamaterial results in significant enhancement of collected single‑photon emission and reduction of the excited‐state lifetime. Our results could have an impact on future CMOS‐compatible integrated quantum sources.
This paper investigates the singular optics of nonparaxial light beams in the near field when the light behaves as a tractor beam. New insights into the optical pulling force, which is usually represented by integrating the stress tensor at a black box enclosing the object, are interpreted by the optical singularity of the Poynting vector. The negative nonconservative pulling force originates from the transfer of the azimuthal Poynting vector to the longitudinal component partly owing to the presence of a scatterer. The separatrice pattern and singularity shifts of the Poynting vector unanimously exhibit a differentiable near‐field distribution in the presence of optical pulling force. A new method is established to calculate the near‐field optical force using the differential Poynting vector in the far field. The results obtained provide a clear physical interpretation of the light–matter interaction and manifest the significance of singular optics in manipulating objects.
A mid‐infrared (MIR) supercontinuum (SC) has been demonstrated in a low‐loss telluride glass fiber. The double‐cladding fiber, fabricated using a novel extrusion method, exhibits excellent transmission at 8–14 μm: < 10 dB/m in the range of 8–13.5 μm and 6 dB/m at 11 μm. Launched intense ultrashort pulsed with a central wavelength of 7 μm, the step‐index fiber generates a MIR SC spanning from ∼2.0 μm to 16 μm, for a 40‐dB spectral flatness. This is a fresh experimental demonstration to reveal that telluride glass fiber can emit across the all MIR molecular fingerprint region, which is of key importance for applications such as diagnostics, gas sensing, and greenhouse CO2 detection.
High performance semiconductor lasers on silicon are critical elements of next generation photonic integrated circuits. Transfer printing methods provide promising paths to achieve hybrid integration of III‐V devices on Si platforms. This paper presents materials and procedures for epitaxially releasing thin‐film microscale GaAs based lasers after their full fabrication on GaAs native substrates, and for subsequently transfer printing arrays of them onto Si wafers. An indium‐silver based alloy serves as a thermally conductive bonding interface between the lasers and the Si, for enhanced performance. Numerical calculations provide comparative insights into thermal properties for devices with metallic, organic and semiconductor interfaces. Under current injection, the first of these three interfaces provides, by far, the lowest operating temperatures. Such devices exhibit continuous‐wave lasing in the near‐infrared range under electrical pumping, with performance comparable to unreleased devices on their native substrates.
We present a general theory of circular dichroism in planar chiral nanostructures with rotational symmetry. It is demonstrated, analytically, that the handedness of the incident field's polarization can control whether a nanostructure induces either absorption or scattering losses, even when the total optical loss (extinction) is polarization‐independent. We show that this effect is a consequence of modal interference so that strong circular dichroism in absorption and scattering can be engineered by combining Fano resonances with planar chiral nanoparticle clusters.
Nonlinear dynamics of continuous‐wave pumped regenerative amplifiers operating at 2 μm are investigated. At repetition rates near 1 kHz, three different operation regimes are observed, including stable regular, chaotic, and subharmonic dynamics. Numerical simulations reproduce this behavior in a quantitative way. In particular, we find stable periodic doubling regimes in which every other seed pulse experiences high gain. Exploiting a narrow parameter window beyond the onset of chaos enables operation of a high‐gain picosecond Ho:YLF regenerative amplifier which delivers up to 16 mJ picosecond pulses at 2050 nm. Energy fluctuations of the 700 Hz pulse train are as low as 0.9% rms.
A novel scheme to multiply the repetition rate of a monolithic self‐mode‐locked laser for generating sub‐terahertz pulse sources is successfully demonstrated. A coated Yb:KGW crystal is designed to achieve a self‐mode‐locked operation at a repetition rate of 24 GHz with an average output power exceeding 1.0 W at a pump power of 4.8 W. A partially reflective mirror is utilized to combine with the output surface of the gain medium to constitute an external Fabry‐Perot cavity. It is theoretically and experimentally verified that adjusting the external cavity length to satisfy the commensurate condition can lead to the frequency spacing to be various order harmonics of the mode spacing of the monolithic cavity. The maximum pulse repetition rate of the laser output can be up to 216 GHz and the pulse duration is as short as 330 fs. More importantly, the overall characteristics of the first‐order temporal autocorrelation traces obtained by sequentially scanning the external cavity.length display an intriguing phenomenon of temporally fractional revivals, similar to the feature of spatial Talbot revivals.
A compact 64‐channel hybrid demultiplexer based on silicon‐on‐insulator nanowires is proposed and demonstrated experimentally to enable wavelength‐division‐multiplexing and mode‐division‐multiplexing simultaneously in order to realize an ultra‐large capacity on‐chip optical‐interconnect link. The present hybrid demultiplexer consists of a 4‐channel mode multiplexer constructed with cascaded asymmetrical directional‐couplers and two bi‐directional 17 × 17 arrayed‐waveguide gratings (AWGs) with 16 channels. Here each bi‐directional AWG is equivalent as two identical 1 × 16 AWGs. The measured excess loss and the crosstalk for the monolithically integrated 64‐channel hybrid demultiplexer are about ‐5 dB and ‐14 dB, respectively. Better performance can be achieved by minimizing the imperfections (particularly in AWGs) during the fabrication processes.
In this work, we report optomechanical coupling, resolved sidebands and phonon lasing in a solid‐core microbottle resonator fabricated on a single mode optical fiber. Mechanical modes with quality factors (Qm) as high as 1.57 × 104 and 1.45 × 104 were observed, respectively, at the mechanical frequencies and . The maximum Hz is close to the theoretical lower bound of 6 × 1012 Hz needed to overcome thermal decoherence for resolved‐sideband cooling of mechanical motion at room temperature, suggesting microbottle resonators as a possible platform for this endeavor. In addition to optomechanical effects, scatter‐induced mode splitting and ringing phenomena, which are typical for high‐quality optical resonances, were also observed in a microbottle resonator.
Following Mie theory, nanoparticles made of a high‐refractive‐index dielectric, such as silicon, exhibit a resonator‐like behavior and very rich resonance spectra. Which electric or magnetic particle mode is excited depends on the wavelength, the refractive‐index contrast relative to the environment, and the geometry of the nanoparticle itself. In addition, the spatial structure of the impinging light field plays a major role in the excitation of the nanoparticle resonances. Here, it is shown that, by tailoring the excitation field, individual multipole resonances can be selectively addressed while suppressing the excitation of other particle modes. This enables a detailed study of selected individual resonances without interference by the other modes.
A necessary condition for generation of bright soliton Kerr frequency combs in microresonators is to achieve anomalous group velocity dispersion (GVD) for the resonator modes. This condition is hard to implement in the visible as well as ultraviolet since the majority of optical materials are characterized with large normal GVD in these wavelength regions. We overcome this challenge by borrowing ideas from strongly dispersive coupled systems in solid state physics and optics. We show that photonic compound ring resonators can possess large anomalous GVD at any desirable wavelength, even if each individual resonator is characterized with normal GVD. Based on this concept, we design a mode‐locked frequency comb with thin‐film silicon nitride compound ring resonators in the vicinity of the rubidium D1 line (794.6 nm) and propose to use this optical comb as a flywheel for chip‐scale optical clocks.
Quantitative phase imaging (QPI), a method that precisely recovers the wavefront of an electromagnetic field scattered by a transparent, weakly scattering object, is a rapidly growing field of study. By solving the inverse scattering problem, the structure of the scattering object can be reconstructed from QPI data. In the past decade, 3D optical tomographic reconstruction methods based on QPI techniques to solve inverse scattering problems have made significant progress. In this review, we highlight a number of these advances and developments. In particular, we cover in depth Fourier transform light scattering (FTLS), optical diffraction tomography (ODT), and white‐light diffraction tomography (WDT).
Microresonator‐based Kerr frequency comb (microcomb) generation can potentially revolutionize a variety of applications ranging from telecommunications to optical frequency synthesis. However, phase‐locked microcombs have generally had low conversion efficiency limited to a few percent. Here we report experimental results that achieve conversion efficiency ( on‐chip comb power excluding the pump) in the fiber telecommunication band with broadband mode‐locked dark‐pulse combs. We present a general analysis on the efficiency which is applicable to any phase‐locked microcomb state. The effective coupling condition for the pump as well as the duty cycle of localized time‐domain structures play a key role in determining the conversion efficiency. Our observation of high efficiency comb states is relevant for applications such as optical communications which require high power per comb line.
An ultrathin Huygens metasurface is proposed to manipulate orthogonally polarized transmitted waves independently. The Huygens metasurface consists of two layers of dielectric substrates and three layers of artificial metallic structures with ultrathin electric thickness. In physics, two orthogonal electric dipoles and two orthogonal magnetic dipoles are supported by each unit cell of the metasurface, which enable the complete control of phase distributions in both vertical and horizontal directions. Based on this feature, a polarization beam splitter with large splitting angle is designed and fabricated to demonstrate the capability and flexibility of the proposed Huygens metasurface. The numerical simulations and measurement results have a good match, indicating the good performance on independent controls of orthogonally polarized transmitted waves.
