Réactivité du bromure de 5-thioxylopyranosyle et du 1,5-dithioxylopyranoside vis-à-vis d’anions thiolate

Reactivity of 5-thioxylopyranosyl bromide and 1,5-dithioxylopyranoside towards thiolate anions. Reactivity of thiolate anion RS^– 2′ (C₆H₅–S^–) and 3′ (p-CH₃–C₆H₄–S^–) towards 5-thioxylopyranosyl bromide Xyl–Br yields to the corresponding 1,5-dithioxylopyranoside Xyl–SR 7 R = C₆H₅– and 8 R = p-CH₃–C₆H₄, respectively. In the presence of 4′ (C₆H₅–CH₂–S^–) or 5′ (CH₃–S^–), the reaction gives the 5-thioxylopyranose 9. Anions 5′ and 4′ react with 1,5-dithioxylopyranoside 10 Xyl–SR′ (R′ = –C₆H₄–CO–C₆H₄–CN) to give sulphide derivative 11 (CH₃–S–C₆H₄–CO–C₆H₄– CN) and 13 (C₆H₅–CH₂–S–C₆H₄–CO–C₆H₄–CN), respectively, and the 1,5–dithioxylose 12. These differences in terms of reactivity could be explained by the nucleophilic behaviour of the formed thiolate anion. To cite this article: D. Brevet et al., C. R. Chimie 6 (2003).     

Co‐catalyst effects on the thermal stability/activity of N,N,N‐Co ethylene polymerization Catalysts Bearing Fluoro‐Substituted N‐2,6‐dibenzhydrylphenyl groups

The unsymmetrical bis (arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐t‐BuC₆H₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N‐aryl group bedecked with ortho‐substituted fluorobenzhydryl groups, have been employed in the preparation of the corresponding five‐coordinate cobalt (II) chelates, LCoCl₂ ( Co1 – Co5 ); the symmetrical comparator [2,6‐{CMeN(2,6‐(4‐FC₆H₄)₂CH)₂–4‐t‐BuC₆H₂}₂C₅H₃N]CoCl₂ (Co6) is also reported. All cobaltous complexes are paramagnetic and have been characterized by ¹H/¹⁹F NMR spectroscopy, FT‐IR spectroscopy and elemental analysis. The molecular structures of Co3 and Co6 highlight the different degrees of steric protection given to the metal center by the particular N‐aryl group combination. Depending on the aluminoxane co‐catalyst employed to activate the cobalt precatalyst, distinct variations in thermal stability and activity of the catalyst towards ethylene polymerization were exhibited. In particular with MAO, the resultant catalysts reached their optimal performance at 70 °C delivering high activities of up to 10.1 × 10⁶ g PE (mol of Co)^?1 h^?1 with Co1  >  Co4  >  Co2  >  Co5  >  Co3 >>  Co6 . On the other hand, using MMAO, the catalysts operate most effectively at 30 °C but are by comparison less productive. In general, the polyethylenes were highly linear, narrowly disperse and displayed a wide range of molecular weights [M_w range: 18.5–58.7 kg mol^?1 (MAO); 206.1–352.5 kg mol^?1 (MMAO)].     

Quaternary phosphonium-based ionic liquids: Thermal stability and heat capacity of the liquid phase

In spite of the great importance of calorimetric data on phosphonium-based ionic liquids (PBILs), the information available in the literature is quite limited. This work reports the study of the thermal stability and the determination of heat capacity of the following (PBILs): tributyl(methyl)phosphonium methyl sulfate, [(C₄)₃PC₁][MeSO₄], trihexyl-tetradecylphosphonium chloride, [(C₆)₃PC₁₄][Cl], trihexyl-tetradecyl-phosphonium dicyanamide, [(C₆)₃ PC₁₄][DCA], trihexyl-tetradecylphosphonium bis((trifluoromethyl)sulfonyl) imide, [(C₆)₃ PC₁₄][NTf₂], and trihexyl-tetradecylphosphonium tris(pentafluoroethyl)trifluorophosphate, [(C₆)₃ PC₁₄][FAP]. Measurements on the well-known IL 1-ethyl-3-methylimidazoliumbis((trifluoromethyl)sulfonyl)imide, [EMIM][NTf₂], were also performed for comparative purposes. The thermal stability was assessed by conventional and high resolution modulated thermogravimetric analysis within the interval (303 to 873) K. The heat capacity was measured by modulated differential scanning calorimetry within the range (310 to 515) K with an uncertainty in the range (1 to 5) J · K^?1 · mol^?1. The experimental results were correlated using polynomial expressions. The Joback method for predicting ideal gas heat capacities was used in conjunction with the principle of corresponding states and the modified Lydersen–Joback–Reid method to predict the heat capacity of the ILs. The methods due to Valderrama et al. were also used with the same purpose.     

Synthesis,crystal structures and properties of three glutarato and adipato bridged manganese(II) coordination polymers under ambient conditions

Three Mn(II) polymers Mn(H₂O)₄(C₅H₆O₄) 1, [Mn(H₂O)₂(C₅H₆O₄)]·H₂O 2 and Mn(H₂O)(C₆H₈O₄) 3 were synthesized (H₂(C₅H₆O₄) = glutaric acid, H₂(C₆H₈O₄) = adipic acid) under mild ambient conditions. The [Mn(H₂O)₂]²⁺ units in 2 are interlinked by the glutarate anions with a η⁴μ₃ bridging mode to form 2D (4·8²) topological networks, which are stacked via interlayer hydrogen bonds into a 3D (4³·6⁵·8²)(4⁷·6³) topological net. Compound 3 crystallizes in the acentric space group P2₁ and exhibits significant ferroelectricity (remnant polarization Pr = 0.371 nC cm⁻², coercive field Ec = 0.028 kV cm⁻¹, saturation of the spontaneous polarization Ps = 0.972 nC cm⁻²). The adjacent MnO₆ octahedrons in 3 are one atom-shared to generate the Mn₂O₁₁ bi-octahedron, leading into 1D metal oxide chains. The resulting chains are interconnected by the η⁵μ₅ adipate anions to form new 2D (4⁸·6²) networks, which are held together via strong interlayer hydrogen bonds into 3D α-Po topological supra-molecular architecture. The temperature-dependent magnetic susceptibility data of 1–3 shows overall anti-ferromagnetic interactions between the metal ions bridged by the carboxylate groups.     

Group 4 metallocene complexes with pendant nitrile groups

The preparation of a new functionalized cyclopentadienyl ligand bearing a nitrile pendant substituent, (C₅H₄CMe₂CH₂CN)^? is reported. The corresponding lithium salt of this ligand (1) was prepared by the reaction of in situ lithiated acetonitrile with 6,6-dimethylfulvene. The ligand was subsequently utilized for the synthesis of group 4 metal complexes [(η⁵–C₅H₄CMe₂CH₂CN)₂MCl₂] (M = Ti, 2; M = Zr, 3; M = Hf, 4), [(η⁵–C₅H₅) (η⁵–C₅H₄CMe₂CH₂CN)MCl₂] (M = Ti, 7; M = Zr, 8), and [(η⁵-C₅Me₅) (η⁵ C₅H₄CMe₂CH₂CN)₂ZrCl₂] (9). Alternative route to 2 comprised the preparation of half-sandwich complex [(η⁵–C₅H₄CMe₂CH₂CN)TiCl₃] (6). The prepared compounds were characterized by common spectroscopic methods and the solid state structures of complexes 2, 3, 4, 7, and 9 were determined by the single-crystal X-ray diffraction analysis. In addition, compound 7 was converted to the corresponding dimethyl derivative [(η⁵–C₅H₅) (η⁵–C₅H₄CMe₂CH₂CN)TiMe₂] (10) and also treated with the chloride anion abstractor Li[B(C₆F₅)₄] to generate the cationic complex with the coordinated nitrile group, as suggested by the NMR spectroscopy. A formation of yet another cationic complex was observed upon treating compound 10 with (Ph₃C)[B(C₆F₅)₄].     

Metal (Co,Fe) tribenzotetraazachlorin–fullerene conjugates: Impact of direct π-bonding on the redox behaviour and oxygen reduction reaction

Novel hexabutylsulphonyltribenzotetraazachlorin–fullerene (C₆₀) complexes of iron (FeHBSTBTAC–C₆₀) and cobalt (CoHBSTBTAC–C₆₀) have been synthesized and their electrochemistry and oxygen reduction reaction (ORR) compared with their octabutylsulphonylphthalocyanine analogues (FeOBSPc and CoOBSPc). It is proved that electron-withdrawing substituents (–SO₂Bu and C₆₀) on phthalocyanine macrocycle exhibit distinct impact on the solution electrochemistry of these metallophthalocyanine (MPc) complexes. The more electron-withdrawing C₆₀ substituent suppressed ORR compared to the –SO₂Bu in alkaline medium. FeOBSPc showed the best ORR activity involving a direct 4-electron mechanism, a rate constant of ～1 × 10⁸ cm³ mol^?1 s^?1 and a Tafel slope of ?171 mV dec^?1.     

New α,ω-dicarboxylate coordination polymers with 4,4′-bipyridine: Cu(bpy)(C5H6O4), Zn(bpy)(C5H6O4), Zn(bpy)(C6H8O4) and Mn(bpy)(C8H12O4) · H2O

Four 4,4′-bipyridine α,ω-dicarboxylate coordination polymers Cu(bpy)(C₅H₆O₄) (1), Zn(bpy)(C₅H₆O₄) (2), Zn(bpy)(C₆H₈O₄) (3) and Mn(bpy)(C₈H₁₂O₄) · H₂O (4) have been synthesized and structurally characterized by single crystal X-ray diffraction methods (bpy = 4,4-bipyridine, (C₅H₆O₄)²⁻ = glutarate anion, (C₆H₈O₄)²⁻ = adipate anion, (C₈H₁₂O₄)²⁻ = suberate anion). Their crystal structures are featured by dimeric metal units, which are co-bridged by 4,4′-bipyridine ligands and dicarboxylate anions such as glutarate, adipate and suberate anions to generate 2D layers with a (4,4) topology in 1, 2 and 4 as well as to form 3D frameworks in 3. Two 3D frameworks in 3 interpenetrate with each other to form a topology identical to the well-known Nb₆F₁₅ cluster compound. Over 5–300 K, the paramagnetic behavior of 4 follows the Curie–Weiss law χ_m(T − Θ) = 4.265(5) cm³ mol⁻¹ with the Weiss constant Θ = −6.3(2) K. Furthermore, the thermal behavior of 3 and 4 is also discussed.     

On the kinetics of thermal electron attachment to perfluoroethers

In this Letter we report the results of the measurements of the rate coefficients for thermal attachment to several perfluoroethers namely perfluorodiglyme (C₆F₁₄O₃), perfluorotriglyme (C₈F₁₈O₄), perfluoropolyether (CF₃–(OCF(CF₃)CF₂)_n–(OCF₂)_m–OCF₃) and perfluorocrownether ((C₂F₄O)₅). Rate coefficients were obtained under thermal conditions in the temperature range 298–378 K. The increase of the rates with temperature follows the Arrhenius law and the activation energies have been obtained from the slope of the ln(k) vs. 1/T. The respective values of the rate coefficients (at 298 K) and activation energies are as follows: 7.7 ± 1.2 × 10^?11 cm³ s^?1 (0.18 ± 0.005 eV), 6.7 ± 2.1 × 10^?11 cm³ s^?1 (0.25 ± 0.004 eV), 2.1 ± 0.2 × 10^?10 cm³ s^?1 (0.16 ± 0.010 eV), 3.1 × 10^?11 cm³ s^?1 (0.27 ± 0.003 eV) for C₆F₁₄O₃, C₈F₁₈O₄, CF₃–(OCF(CF₃)CF₂)_n–(OCF₂)_m–OCF₃ and (C₂F₄O)₅.     

An experimental and theoretical investigation on hypervalent organoselenium(II) halides: Case study of [2-(Et2NCH2)C6H4]SeX (X = Cl,Br, I)

Cleavage of the Se–Se bond in [2-(Et₂NCH₂)C₆H₄]₂Se₂ (1) with SO₂Cl₂ (1:1 molar ratio) yielded the organoselenium(II) chloride [2-(Et₂NCH₂)C₆H₄]SeCl (2). Treatment of 2 with excess of KX yielded the organoselenium(II) halides [2-(Et₂NCH₂)C₆H₄]SeX [X = Br (3), I (4)]. The new compounds 2–4 were characterized by solution NMR spectroscopy (¹H, ¹³C, ⁷⁷Se, 2D experiments). The solid-state molecular structures of 2, 2·HCl and 3 were established by single crystal X-ray diffraction. Distorted T-shaped coordination geometries of type (C,N)SeX (X = Cl, Br) and CSeCl₂ were found for the neutral halides 2 and 3, and the zwitterionic species [2-{Et₂N⁺(H)CH₂}C₆H₄]SeCl₂￣ (2·HCl), respectively. DFT calculations were performed on 2–4 and the related tellurium compounds [2-(Et₂NCH₂)C₆H₄]TeX [X = Cl (5), Br (6) and I (7)] in order to elucidate the bond nature and FT-Raman features of this class of organochalcogen(II) derivatives.     

Effects of Cl/Br substitution of antimony octahedra on photoluminescence and a new engineering strategy for performance optimization

Organic-inorganic metal halides have garnered extensive attention due to their versatile structures as well as fascinating optical properties, among which especially antimony halides are the focus of recent research. Herein, we design a series of novel zero-dimensional (0D) antimony halides of (C₁₃H₁₄N₃)₃SbCl_6–xBr_x (x = 0, 3, 6) with bright and tunable broadband emissions from yellow (576 nm) to orange (600 nm), which are attributed to the triplet self-trapped excitons (STEs) of the six-coordinated [SbX₆]^3– (X = Cl^? or Br^?) units. The role of halogens on their specific ³P₁→¹S₀ transition is determined, wherein Cl/Br transmutation reveals a common law modulating photoluminescence behaviors. Furthermore, a new two-step compound technology is innovatively developed for performance optimization, enabling by incorporating the pristine antimony halides into polymethyl methacrylate (PMMA) with high transparency and strong moisture resistance. The composites (C₁₃H₁₄N₃)₃SbCl_6–xBr_x/PMMA (x = 0, 3, 6) were fabricated through a demanding technology that significantly improve the processability and water stability of antimony halides while maintaining high photoluminescence quantum yields. This work not only proposes a method for halogen substitutions to tune emission, but also opens up a feasible research avenue for performance optimization in the multifunctional luminescence materials.     

Formation of p-terphenyl excited states in the ionic liquid methyltributylammonium bis[(trifluoromethyl)sulfonyl]imide: pulse radiolysis study

Solutions of 80 mM benzophenone (BP) and up to 14 mM p-terphenyl (TP) in the ionic liquid methyltributylammonium bis[(trifluoromethyl)sulfonyl]imide (R₄NNTf₂) have been investigated by nanosecond pulse radiolysis. The resulting transient absorption spectra of pulse-irradiated argon saturated solutions correspond to the formation of several intermediates derived from BP and TP: benzophenone radical anion [(C₆H₅)₂CO]^•− (BP^•−) converted after ~20 μs into ketyl radicals (C₆H₅)₂C^•OH (BP^•H), a hydrogen adduct to the phenyl ring of benzophenone C₆H₅COC₆H₆^•, p-terphenyl triplet excited state ³TP*, and traces of TP radical ions. ³TP* was formed in two steps, the first immediately during the pulse and the second in pseudo-first order process with a second order reaction rate constant calculated from TP concentration dependence: k = ~2 × 10⁸ dm³ mol⁻¹ s⁻¹.     

Syntheses,characterization, powder X‐ray diffraction analysis and antibacterial and antioxidant activities of triphenylantimony(V) heteroleptic derivatives containing substituted oximes and morpholine dithiocarbamate

Triphenylantimony(V) heteroleptic derivatives containing substituted oximes and morpholine dithiocarbamate of the type Ph₃Sb[R(R′)C:NO]₂[S₂CN(CH₂CH₂)₂O] (where R = ─C₆H₅, R′ = ─CH₃ (I); R = ─C₆H₄CH₃, R′ = ─CH₃ (II); R = ─C₆H₄Cl, R′ = ─CH₃ (III); R = ─C₆H₄Br, R′ = ─CH₃ (IV); R = ─C₆H₄OH, R′ = ─H (V); R(R′)C = CCH₂(CH₂)₃CH₂ (VI)) were synthesized by successive substitution reactions of triphenylantimony(V) dibromide with the sodium salt of substituted oximes and morpholine dithiocarbamate in unimolar ratio. All these newly synthesized derivatives were characterized using physicochemical and elemental analyses and tentative structures have been proposed on the basis of infrared, (¹H, ¹³C) NMR and liquid chromatography–mass spectra. Spectral data revealed that the oxime behaves in a monodentate manner whereas morpholine dithiocarbamate behaves in an anisobidentate manner and thus distorted octahedral geometry has been proposed for these derivatives. Nanometric particle size (ca 25 nm) and monoclinic crystal system have been determined using power X‐ray diffraction data of two representative derivatives. Furthermore, these newly synthesized derivatives were screened against two bacteria, Bacillus subtilis (Gram‐positive) and Escherichia coli (Gram‐negative), to evaluate their antibacterial potential. Derivative VI exhibited maximum zone of inhibition (30 mm) against E. coli. Additionally two derivatives (I and II) were tested for their antioxidant potential, with derivative II exhibiting higher antioxidant potential (233 μM g^?1). Structure–activity relationships were also investigated.     

Pressure–volume–temperature measurements of phosphonium-based ionic liquids and analysis with simple equations of state

In spite of the great importance of the (P, V, T) data of phosphonium–based ionic liquids, only limited information on these data seems to be available in the open literature. In this work, we present the results for the density measurements of the trihexyltetradecylphosphonium chloride, [(C₆H₁₃)₃P(C₁₄H₂₉)][Cl] and trihexyltetradecylphosphonium dicyanamide, [(C₆H₁₃)₃P(C₁₄H₂₉)][N(CN₂)] with an estimated uncertainty of ±0.5 kg · m^?3. The ranges of temperature and pressure are T = (273.15 to 318.15) K and p = (0.1 to 25) MPa for [(C₆H₁₃)₃P(C₁₄H₂₉)][Cl] and T = (273.15 to 318.15) K and p = (0.1 to 35) MPa for [(C₆H₁₃)₃P(C₁₄H₂₉)][N(CN₂)]. The high consistency of our data for [(C₆H₁₃)₃P(C₁₄H₂₉)][Cl] compared with those measured by other authors allowed all the experimental data for this IL to be combined and correlated using the Goharshadi–Morsali–Abbaspour equation of state over a wide range of temperature and pressure. From this equation, thermomechanical coefficients as the isothermal compressibility, thermal expansivity, thermal pressure, and internal pressure were calculated for the two ILs. The Sanchez–Lacombe equation of state was used also for (P, V, T) correlation and the estimation of the free volume in these phosphonium ionic liquids. Finally ionic volumes for trihexyltetradecylphosphonium cation and several anions available in the literature made possible the calculation of the free (hole) volume.     

C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands prepared by different in situ bonding mechanisms and their use in catalytic (co)polymerization of norbornene and styrene

Two C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands with electron‐withdrawing groups (─CF₃), Ni{PhC(O)CHC[N(9‐fluorenyl)]CF₂}₂ (Ni 1 ) and Ni{CF₃C(O)CHC[N(9‐fluorenyl)]Ph}₂ (Ni 2 ), were synthesized by metal coordination reaction and different in situ bonding mechanisms. The C–C bridged bonds of Ni 1 were formed by in situ intramolecular trifluoromethyl and 9‐fluorenyl carbon–carbon cross‐coupling reaction and those of Ni 2 were formed by in situ intramolecular 9‐fluorenyl carbon–carbon radical coupling reaction mechanism. The obtained complexes were characterized using ¹H NMR spectroscopy and elemental analyses. The crystal and molecular structures of Ni 1 and Ni 2 with C–C bridged configuration were determined using X‐ray diffraction. Ni 1 and Ni 2 were used as catalysts for norbornene (NB) polymerization after activation with B(C₆F₅)₃ and the catalytic activities reached 10⁶ g_polymer mol_Ni^?1 h^?1. The copolymerization of NB and styrene catalyzed by the Ni 1 /B(C₆F₅)₃ system showed high activity (10⁵ g_polymer mol_Ni^?1 h^?1) and the catalytic activities decreased with increasing feed content of styrene. All vinyl‐type copolymers exhibited high molecular weight (10⁴ g mol^?1), narrow molecular weight distribution (M_w/M_n = 1.71–2.80), high styrene insertion ratios (11.13–50.81%) and high thermal stability (T_d > 380°C) and could be made into thin films with high transparency in the visible region (400–800 nm).     

New series of platinum group metal complexes bearing η- and η-cyclichydrocarbons and Schiff base derived from 2-acetylthiazole: Syntheses and structural studies

The mononuclear complexes [(η⁶-arene)Ru(ata)Cl]PF₆ {ata = 2-acetylthiazole azine; arene = C₆H₆ [(1)PF₆]; p-ⁱPrC₆H₄Me [(2)PF₆]; C₆Me₆ [(3)PF₆]}, [(η⁵-C₅Me₅)M(ata)]PF₆ {M = Rh [(4)PF₆]; Ir [(5)PF₆]} and [(η⁵-Cp)Ru(PPh₃)₂Cl] {η⁵-Cp = η⁵-C₅H₅ [(6)PF₆]; η⁵-C₅Me₅ (Cp^*) [(7)PF₆]; η⁵-C₉H₇ (indenyl); [(8)PF₆]} have been synthesised from the reaction of 2-acetylthiazole azine (ata) and the corresponding dimers [(η⁶-arene)Ru(μ-Cl)Cl]₂, [(η⁵-C₅Me₅)M(μ-Cl)Cl]₂, and [(η⁵-Cp)Ru(PPh₃)₂Cl], respectively. In addition to these complexes a hydrolysed product (9)PF₆, was isolated from complex (4)PF₆ in the process of crystallization. All these complexes are isolated as hexafluorophosphate salts and characterized by IR, NMR, mass spectrometry and UV–Vis spectroscopy. The molecular structures of [2]PF₆ and [9]PF₆ have been established by single-crystal X-ray structure analyses.     

Effects of bulky substituent groups on the Si–Si triple bonding in RSiSiR and the short Ga–Ga distance in Na2[RGaGaR]: A theoretical study

The steric and electronic effects of bulky aryl and silyl groups on the Si–Si triple bonding in RSiSiR and the short Ga–Ga distance in Na₂[RGaGaR] are investigated by density functional calculations. As typical bulky groups, Tbt = C₆H₂-2,4,6-{CH(SiMe₃)₂}₃, Ar′ = C₆H₃-2,6-(C₆H₃-2,6-iPr₂)₂, Ar¹ = C₆H₃-2,6-(C₆H₂-2,4,6-iPr₃)₂, SiMe(SitBu₃)₂, and SiiPrDis₂ (Dis = CH(SiMe₃)₂) are investigated and characterized. The importance of large basis sets is emphasized for density functional calculations.     

Synthesis,crystal structure,vibrational spectra,optical properties and theoretical investigation of a two-dimensional self-assembled organic-inorganic hybrid material

Organic–inorganic hybrid material of formula (C₄H₃SC₂H₄NH₃)₂[PbI₄] was synthesized and studied by X-ray diffraction, Infrared absorption, Raman scattering, UV–Visible absorption and photoluminescence measurements. The molecule crystallizes as an organic–inorganic two-dimensional (2D) structure built up from infinite PbI₆ octahedra surrounded by organic cations. Such a structure may be regarded as quantum wells system in which the inorganic layers act as semiconductor wells and the organic cations act as insulator barriers. Room temperature IR and Raman spectra were recorded in the 520–3500 and 10–3500 cm⁻¹ frequency range, respectively. Optical absorption measurements performed on thin films of (C₄H₃SC₂H₄NH₃)₂[PbI₄] revealed three distinct bands at 2.4, 2.66 and 3.25 eV. We also report DFT calculations of the electric dipole moments (μ), polarizability (α), the static first hyperpolarizability (β) and HOMO–LUMO analysis of the title compound investigated by GAUSSIAN 09 package. The calculated static first Hyperpolarizability is equal to 11.46 × 10⁻³¹ esu.     

Fluorinated sulfonate surfactants

New classes of fluorinated sulfonate surfactants were synthesized in which a perfluoroalkyl chain is interrupted either by an ether oxygen (–O–), or by methylene (–CH₂–) units. Both classes of molecules involve multi-step syntheses. The fluoroether sulfonates (RfOCF₂CF₂CH₂CH₂SO₃H, Rf = C₂F₅, C₃F₇) were achieved in four steps including fluoroiodonation of perfluorovinyl ethers (RfCF = CF₂), ethylation, chlorination and hydrolysis. The methylene interrupted fluorosulfonates (RfCH₂CF₂CH₂CH₂SO₃H, Rf = C₄F₉, C₆F₁₃) were also prepared in four steps involving vinylidene fluoride insertion of fluoroalkyl iodides, ethylene insertion, chlorination and hydrolysis. All intermediates and final products were well characterized by ¹H and ¹⁹F NMR. These new fluorinated surfactants were compared to a commercially available fluorosulfonate (C₆F₁₃CH₂CH₂SO₃H) for surface activity. These materials match the surface tensions of commercial fluorosurfactant yet are more efficient because they have lower fluorine content.     

Synthesis,structure, spectroscopy and redox energetics of a series of uranium(IV) mixed-ligand metallocene complexes

A series of uranium(IV) mixed-ligand amide–halide/pseudohalide complexes (C₅Me₅)₂U[N(SiMe₃)₂](X) (X = F (1), Cl (2), Br (3), I (4), N₃ (5), NCO (6)), (C₅Me₅)₂U(NPh₂)(X) (X = Cl (7), N₃ (8)), and (C₅Me₅)₂U[N(Ph)(SiMe₃)](X) (X = Cl (9), N₃ (10)) have been prepared by one electron oxidation of the corresponding uranium(III) amide precursors using either copper halides, silver isocyanate, or triphenylphosphine gold(I)azide. Agostic U?H–C interactions and η³-(N,C,C′) coordination are observed for these complexes in both the solid-state and solution. There is a linear correlation between the chemical shift values of the C₅Me₅ ligand protons in the ¹H NMR spectra and the U^IV/U^III reduction potentials of the (C₅Me₅)₂U[N(SiMe₃)₂](X) complexes, suggesting that there is a common origin, that is overall σ-/π-donation from the ancillary (X) ligand to the metal, contributing to both observables. Optical spectroscopy of the series of complexes 1–6 is dominated by the (C₅Me₅)₂U[N(SiMe₃)₂] core, with small variations derived from the identity of the halide/pseudohalide. The considerable π-donating ability of the fluoride ligand is reflected in both the electrochemistry and UV-visible-NIR spectroscopic behavior of the fluoride complex (C₅Me₅)₂U[N(SiMe₃)₂](F) (1). The syntheses of the new trivalent uranium amide complex, (C₅Me₅)₂U[N(Ph)(SiMe₃)](THF), and the two new weakly-coordinating electrolytes, [Pr₄N][B{3,5-(CF₃)₂C₆H₃}₄] and [Pr₄N][B(C₆F₅)₄], are also reported.     

Exceptionally high molecular weight linear polyethylene by using N,N,N′‐Co catalysts appended with a N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group

The bis(arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐NO₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group, have been synthesized by two successive condensation reactions from 2,6‐diacetylpyridine. Their subsequent treatment with anhydrous cobalt (II) chloride gave the corresponding N,N,N′‐CoCl₂ chelates, Co1 – Co5 , in excellent yield. All five complexes have been characterized by ¹H/¹⁹F NMR and IR spectroscopy as well as by elemental analysis. In addition, the molecular structures of Co1 and Co3 have been determined and help to emphasize the differences in steric properties imposed by the inequivalent N‐aryl groups; distorted square pyramidal geometries are adopted by each complex. Upon activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), precatalyts Co1 – Co5 collectively exhibited very high activities for ethylene polymerization with 2,6‐dimethyl‐substituted Co1 the most active (up to 1.1 × 10⁷ g (PE) mol^?1 (Co) h^?1); the MAO systems were generally more productive. Linear polyethylenes of exceptionally high molecular weight (M_w up to 1.3 × 10⁶ g mol^?1) were obtained in all cases with the range in dispersities exhibited using MAO as co‐catalyst noticeably narrower than with MMAO [M_w/M_n: 3.55–4.77 ( Co1 – Co5 /MAO) vs. 2.85–12.85 ( Co1 – Co5 /MMAO)]. Significantly, the molecular weights of the polymers generated using this class of cobalt catalyst are higher than any literature values reported to date using related N,N,N‐bis (arylimino)pyridine‐cobalt catalysts.