Self-assembled monolayers of decanethiol on Au(111)/mica

We report here a preparation for thin gold films on mica substrates. We have investigated the influence of the substrate temperature and the evaporation rate on the morphology of the films. After careful outgasing of the substrate, 100 nm of Au is evaporated onto the mica surface maintained at high temperature. After slow cooling, ex situ characterizations are performed using AFM and STM. For our purposes, the best compromise between roughness and grain size is found to occur for an evaporation rate of 2 ?s^-1 onto a mica substrate maintained at 460 C. We have used these substrates for STM and AFM study of decanethiol self-assembled monolayers (SAMs). We present results for gold samples immersed for a few seconds in decanethiol solutions, revealing an incomplete organization of the films. The organization process is discussed through comparison between AFM and STM data recorded on the SAMs. Then we present molecular resolution STM pictures of ordered SAMs for longer immersion times. Received 25 May 1999     

Deposition and fabrication of alkanethiolate gold nanocluster films on TiO2(1 1 0) and the effects of plasma etching

Deposition and fabrication of films of Au nanoclusters protected by alkanethiolate ligands are attempted on a TiO₂(1 1 0) surface and the structures of films are observed by a scanning tunneling microscope (STM). Effects of oxygen and hydrogen-plasma etching in addition to UV irradiation on the structure and chemical composition of the films are also investigated by using STM and X-ray photoelectron spectroscopy. Alkanethiolate Au nanoclusters are produced using a modified Brust synthesis method and their LB films are dip-coated on TiO₂(1 1 0). Alkanethiolate Au nanoclusters are weakly bound to the substrate and can be manipulated with an STM tip. Net-like structures of alkanethiolate Au nanoclusters are formed by a strong blast of air. Oxygen-plasma etching removes alkanethiolate ligands and simultaneously oxidizes Au clusters. At room temperature, prolonged oxygen-plasma etching causes agglomeration of Au nanoclusters. UV irradiation removes ligands partly, which makes Au nanoclusters less mobile. The net-like structure of alkanethiolate Au clusters produced by a blast of air is retained after oxygen and hydrogen-plasma etching.     

Scanning tunneling microscopy of adsorbates on insulating films. From the imaging of individual molecular orbitals to the manipulation of the charge state

Ultrathin insulating films on metal substrates are unique systems for using a scanning tunneling microscope to study the electronic properties of single atoms and molecules that are electronically decoupled from the metallic substrate. Individual gold atoms on an ultrathin insulating sodium chloride film supported by a copper surface exhibit two different charge states, which are stabilized by the large ionic polarizability of the film. The charge state and associated physical and chemical properties such as diffusion can be controlled by adding or removing a single electron to or from the adatom with a scanning tunneling microscope tip. The simple physical mechanism behind the charge bistability in this case suggests that this is a common phenomenon for adsorbates on polar insulating films. In the case of molecules on ultrathin NaCl films, the electronic decoupling allows the direct imaging of the unperturbed molecular orbitals, as will be shown in the case of individual pentacene molecules. PACS 68.37.Ef; 73.61.Ng; 73.20.Hb     

STM study of Au(111) growth on mica

Gold films were thermally evaporated in vacuum on heated cleaved mica substrates. The substrate temperature was immediately decreased after finishing the growth. Samples prepared at various temperatures from 580 K to 890 K and evaporation rates smaller than 1 nm/s were studied by a scanning tunneling microscope (STM) under ambient conditions. Structure and defects of Au(111) surfaces were investigated and discussed with respect to growth conditions.     

Mechanical properties of H2Pc self-assembled monolayers at the single molecule level by noncontact atomic force microscopy

The mechanical properties of molecular self-assembled monolayers (SAMs) play an important role in understanding the interactions between molecules in the self-assembly, the interactions between molecules and substrate, and thus the formation mechanism of SAMs. Using a high-resolution noncontact atomic force microscope (NC-AFM) combined with a scanning tunneling microscope (STM), we have successfully obtained the sub-molecular resolution of a H(2)Pc self-assembled monolayer grown on a Pb(111) surface. A 2 × 2 superstructure was observed in both AFM and STM topographic images. The lateral critical force of removing a H(2)Pcmolecule from its SAM and moving a single H(2)Pc molecule on Pb(111) were measured. An oscillation of the critical force along the edge of the H(2)Pc SAM with a period of two molecular sites was observed, which can be attributed to the 2 × 2 superstructure. The lateral critical force caused by intermolecular interaction was found to be 25 pN on average and is typically two times larger than the molecule-substrate interaction.     

STM manipulation of a subphthalocyanine double-wheel molecule on Au(111)

A new class of double-wheel molecules is manipulated on a Au(111) surface by the tip of a scanning tunneling microscope (STM) at low temperature. The double-wheel molecule consists of two subphthalocyanine wheels connected by a central rotation carbon axis. Each of the subphthalocyanine wheels has a nitrogen tag to monitor its intramolecular rolling during an STM manipulation sequence. The position of the tag can be followed by STM, allowing us to distinguish between the different lateral movements of the molecule on the surface when manipulated by the STM tip.     

Phase transition-induced superstructures of β-Sn films with atomic-scale thickness

The ultrathin β-Sn(001) films have attracted tremendous attention owing to its topological superconductivity(TSC),which hosts Majorana bound state(MBSs) for quantum computation.Recently,β-Sn(001) thin films have been successfully fabricated via phase transition engineering.However,the understanding of structural phase transition of β-Sn(001)thin films is still elusive.Here,we report the direct growth of ultrathin β-Sn(001) films epitaxially on the highly oriented pyrolytic graphite(HOPG) substrate and the characterization of intricate structural-transition-induced superstructures.The morphology was obtained by using atomic force microscopy(AFM) and low-temperature scanning tunneling microscopy(STM),indicating a structure-related bilayer-by-bilayer growth mode.The ultrathin β-Sn film was made of multiple domains with various superstructures.Both high-symmetric and distorted superstructures were observed in the atomic-resolution STM images of these domains.The formation mechanism of these superstructures was further discussed based on the structural phase transition of β to α-Sn at the atomic-scale thickness.Our work not only brings a deep understanding of the structural phase transition of Sn film at the two-dimensional limit,but also paves a way to investigate their structure-sensitive topological properties.     

Imaging of ferroelectric vinylidene fluoride and trifluoroethylene copolymer films by scanning tunneling microscopy

In this paper, we reported the possibility to image non-conducting P(VDF-TrFE) copolymer films by STM. The films had the thickness of ∼25.0 nm and were spin-coated onto Au or graphite substrates. For films deposited on Au substrates, STM images showed grain structures of ∼100 nm, much larger than the grains of bare Au substrate. With increased scan rate, the film surface was damaged by STM tip and extreme protrusions and holes were observed. For films deposited on graphite substrates, we only obtained an image of very flat plane and could not observe the topography of the film surface. It seemed that the tip had pierced through the uppermost P(VDF-TrFE) layers and only imaged the layers nearest to the substrate. Asymmetrical current-voltage curves were observed from copolymer films deposited on HOPG. Experimental results were discussed.     

A scanning tunnelling microscopy investigation of gold island formation from an octanethiol self-assembled monolayer on Au(1 1 1)

The release of gold atoms from an octanethiol monolayer on Au(1 1 1) and the subsequent formation of single-layer-high gold islands have been investigated using a scanning tunnelling microscope (STM) in air. When the bias voltage between the STM tip and the sample is above the threshold for water electrolysis, reactive desorption of the thiol molecules takes place leading to the release of gold adatoms. The number of released atoms has been evaluated as a function of exposure to the tip current under both positive and negative bias voltages. Tip-induced ripening of the gold islands, and more interestingly, tip-induced disintegration of small islands are observed.     

Silver ions adsorbed to self-assembled monolayers of alkanedithiols on gold surfaces form Ag–dithiol–Au multilayer structures

Double-ended alkanedithiols, 1,9-nonanedithiol and 1,5-pentanedithiol, formed self-assembled monolayers (SAMs) on Au(l11) substrates and were used to adsorb silver ions from an ethanolic solution of silver nitrate and formed Ag–dithiol–Au multilayer structures. Ellipsometry, contact angle measurement and X-ray photoelectron spectroscopy (XPS) confirmed that the alkanedithiol molecules formed SAMs with only one-ended thiol groups attached to the Au substrates, which was supported by molecular mechanics calculation. XPS and X-ray Auger electron spectroscopy (XAES) indicated that silver ions were deposited onto the SAMs from the solution by the chemical reaction of silver nitrate with another-ended thiol groups of the SAMs. Atomic force microscopy (AFM) was used to observe SAMs and multilayer structures. Received: 20 January 2000 / Accepted: 18 April 2000 / Published online: 9 August 2000     

Manipulation and control of a single molecular rotor on Au (111) surface

Three different methods are used to manipulate and control phthalocyanine based single molecular rotors on Au (111) surface: (1) changing the molecular structure to alter the rotation potential; (2) using the tunnelling current of the scanning tunnelling microscope (STM) to change the thermal equilibrium of the molecular rotor; (3) artificial manipulation of the molecular rotor to switch the rotation on or off by an STM tip. Furthermore, a molecular `gear wheel' is successfully achieved with two neighbouring molecules.     

Single quantum dots as scanning tunneling microscope tips

We report the use of single quantum dot structures as tips on a scanning tunneling microscope (STM). A single quantum dot structure with a diameter of less than 200 nm and a height of 2 μm was fabricated by reactive ion etching. This dot was placed on a 40 μm-high mesa and mounted on the tip of a STM. The topography of large structures such as quantum wires or gold test substrates is clearly resolved with such a tip. To check the transport properties of the tip, quantum dot arrays were fabricated on resonant tunneling double barrier structures using the same process parameters. Conventional tunneling spectroscopy clearly resolved the 0D states in our samples. Using a metal substrate as second electrode such STM tips can be used to perform high resolution energy spectroscopy on single dots and free standing wire structures.     

Creation of high resolution pattern by nanoscratching

The lithography is a basic microelectronic process which determines properties of fabricated device. The resolution of optical lithography applied nowadays is insufficient for creating high resolution patterns such as gate electrode in transistors. The scaling ability is the major motivation for undertaking experiments to elaborate high resolution lithography techniques. The atomic force microscope (AFM) is commonly used as tool for creation patterns in sub-micrometers resolution. In this paper, the results of simulations of electromagnetic field behavior during passing the gap with a size smaller than the wavelength of the optical lithography light source are presented. Also results of the nanoscratching lithography prepared for various parameters of force that are applied to the tip are summarized.     

Molecular resolution of Langmuir-Blodgett monolayers on tungsten diselenide by scanning tunneling microscopy

Langmuir-Blodgett (LB) monolayers of 22-tricosenoic acid deposited on layered tungsten diselenide (WSe₂) have been investigated by Scanning Tunneling Microscopy (STM) in air. Reproducible molecular scale imaging of extended areas (16×16 nm) of the films was possible over more than two months after preparation. This indicates a high stability of the films on this type of polar substrates. The two-dimensional lattice of the organic film is incommensurate to the lattice of the WSe₂ substrates. The STM experiments also indicate that the tip partially penetrates the organic film without destroying the film structure.     

Photon emission from adsorbed C60 molecules with sub-nanometer lateral resolution

We present the first experimental demonstration of spatially resolved photon emission of individual molecules on a surface. A scanning tunneling microscope (STM) was used as a local electron source to excite photon emission from hexagonal arrays of C₆₀ molecules on Au(110) surfaces. Specifically, we show that in maps of photon emission intensities, C₆₀ fullerenes appear as arrays of individual light emitters 4 Å in diameter and separated by 10 Å. Comparison with simultaneously recorded STM images reveals, that most intense emission is detected when the STM tip is centered above a molecule. The results demonstrate the highest spatial resolution of light emission to date using a scanning probe technique.     

INVESTIGATION ON THE STRUCTURE AND ELECTRIC PROPERTIES OF BUCKY ONIONS

Bucky onions were fabricated by the DC discharge method and their behaviors and electric properties on Highly Oriented Pyrolytic Graphite (HOPG) were studied by using an atomic force microscope (AFM), a scanning tunneling microscope (STM) and a transmission electron microscope (TEM). Small-sized Bucky onions demonstrated the properties of semiconductors and as the size increased their metallicity became stronger. AFM and STM images revealed the tendency of Bucky onions to form dimers.     

Determination of C60/C70 ratios in fullerene mixtures and film characterization by scanning tunneling microscopy

Fullerene powder mixtures with different C₆₀/C₇₀ ratios have been analyzed by a variety of techniques, and results have been compared. The fullerence mixtures have been characterized as solutions in n-hexane by high-pressure liquid chromatography (HPLC) and UV-VIS spectroscopy. Thin films of fullerenes on Au(111) have been prepared from the mixtures by sublimation. The sublimation process has been studied by simultaneous thermogravimetric and differential thermal analyses. Thin fullerene films on Au(111) have been investigated by scanning tunneling microscopy (STM). The STM images show primarily two types of ballshaped molecules arranged in a lattice with hexagonal symmetry (fcc(111) face, nearest neighbour distance: 1 nm). The two species differ in diameter. STM images of films made of mixtures of different C₆₀/C₇₀ ratios show that C₇₀ molecules display a larger apparent diameter (0.8 nm) and corrugation than C₆₀ molecules (0.7 nm). The C₆₀/C₇₀ ratios obtained by counting the corresponding molecular species in the STM images of the thin films are compared to the C₆₀/C₇₀ ratios determined by HPLC on hexane solutions of the mixtures. The observed differences might be explained by different rates of sublimation for the two species. The STM images reveal film defects (vacancies and boundaries) and dynamic processes (displacement of C₇₀ molecules and vacancies). In films prepared to have a C₆₀ coverage of less than one monolayer, stable structural units of the C₆₀(111) surface consisting of three or seven C₆₀ molecules are revealed by STM. Occasionally, substructure within individual fullerene molecules is observed.     

Study of resonant tunneling in Au nanoclusters on the surface of SiO2/Si thin films using the combined scanning tunneling microscopy and atomic-force microscopy technique

The morphology and electronic properties of Au nanoclusters on the surface of SiO₂ thin films on n ⁺-Si substrates are studied using the combined scanning tunneling microscopy (STM) and atomic-force microscopy (AFM) technique. The peaks associated with the resonant tunneling of electrons from the states of the valence band of the probe material to the states of the conduction band of the substrate material through Au nanoclusters are observed on the current-voltage characteristics for the contact of a p ⁺-Si AFM probe with Au nanoclusters. Experimental results are interpreted by calculating the tunnel transparency of the SiO₂/Au/SiO₂ double barrier structure in a strong electric field.     

5,10,15,20-四-(4-十六烷基吡啶基)卟啉LB膜结构的研究

研究了两亲性卟啉５,１０,１５,２０－四－（４－十六烷基吡啶基）卟啉溴化物在气－液界面上的成膜性能,制备了其ＬＢ膜。用扫描隧道显微镜和ＵＶ－Ｖｉｓ光谱,荧光光谱,小角Ｘ射线衍射等实验方法研究了ＬＢ膜的形貌和卟啉大环分子在ＬＢ膜中的排列、取向和分子间的相互作用。结果表明,制备的ＬＢ膜结构均匀,性能稳定,在ＬＢ膜内,脂肪链并不是直立的,卟啉分子大环几乎平躺在基片上。     

The formation of sub-10 nm nanohole array on block copolymer thin films on gold surface using surface neutralization based on O2 plasma treatment and self-assembled monolayer

Blockcopolymer (BCP) lithography is an emerging nanolithography technique for fabrications of various nanoscale devices and materials. In this study, self-assembled BCP thin films having cylindrical nanoholes were prepared on gold by surface neutralization using self-assembled monolayer (SAM). Oxygen plasma treatment was investigated as a way to enhance the functionality of Au surface toward SAM formation. After surface neutralization, well-ordered nanoholes with 9 to 20 nm diameters were formed inside BCP thin films on Au surfaces through microphase separation. The effects of oxygen plasma treatment on the formation of BCP nanopattern were investigated using surface analysis techniques including X-ray photoelectron spectroscopy (XPS) and water contact angle measurement. Au nanodot arrays were fabricated on gold film by utilizing the BCP nanotemplate and investigated by atomic force microscopy (AFM).