Thermodynamic properties of carbynoid structures in the 0—340 K range

The temperature dependences of the heat capacity (C _p°) of carbynoid structures prepared by alkaline dehydrochlorination of poly(vinylidene chloride) and 1,1,2- and 1,2,3-polytrichlorobutadienes were studied by adiabatic vacuum calorimetry between 5 and 340 K with an accuracy of 0.2%. The low-temperature relaxation transitions and abnormal patterns of the C _p° vs. T dependences were identified and characterized. The experimental results were used to calculate the thermodynamic functions C _p°(T), H°(T) – H°(0), S°(T) – S°(0), and G°(T) – H°(0) for 0—340 K. These data were compared with the corresponding data for carbyne produced by oxidative dehydropolycondensation of acetylene, which is a mixture of amorphous - and -forms with a minor impurity of crystals of both forms.     

Relative permittivity increments for {xCH3OH + (1 − x)CH3OCH2(CH2OCH2)3CH2OCH3} fromT = 283.15 K toT = 323.15 K

Relative permittivities of { CH₃OH  +  CH₃OCH₂(CH₂OCH₂)₃CH₂OCH₃(2,5,8,11,14-pentaoxapentadecane, tegdme)} at temperatures from 283.15 K to 323.15 K and atmospheric pressure, were measured over the whole composition range. Experimental relative permittivities were fitted by a polynomial function in mole fraction. Values of relative permittivity were measured using a HP4284A precision LCR Meter together with the measuring cell HP16452A at 1 MHz. Relative permittivity increments were determined from experimental data and fitted to a variable-degree polynomial function. Different theoretical models were used to predict the permittivity of this mixture. The predictions are better when the volume change on mixing is considered.     

Phosphasilaallenes >Si = C = P− and phosphagermaallenes >Ge = C = P−

Phosphasilaallene Tip(Ph)Si = C = PMes* (Tip = 2,4,6-triisopropylphenyl, Mes* = 2,4,6-tri-tert-butylphenyl) and phosphagermaallene Mes₂Ge = C = PMes* (Mes = 2,4,6-trimethylphenyl) have been obtained by dehalogenation of their corresponding dihalophosphametallapropenes > E(X)-C(X′) = P? by tert-butyllithium. They dimerize above ?40 °C by a cycloaddition involving two E = C double bonds or the E = C and the P = C double bonds but can be characterized at low temperature by trapping reactions and by low field shifts in ³¹P, ²⁹Si and particularly ¹³C NMR for the sp carbon atom. Owing to a small increase in the steric hindrance, phosphagermaallene Tip(t-Bu)Ge = C = PMes* can be stabilized and isolated. The Ge = C double bond undergoes nearly quantitative [2 + 1] cycloadditions with chalcogens and [2 + 2] cycloadditions with aldehydes or ketones. The surprisingly stable lithiochlorosilane R(Cl₂)Si-C(Li) = PMes* (R = 9-methylfluorenyl) behaves as a synthetic equivalent of the phosphasilaallene R(Cl)Si = C = PMes*. With two alkyl groups (t-Bu) on the germanium atom, the phosphagermaallene t-Bu₂Ge = C = PMes* is not obtained but its formal dimers 1,3-digermacyclobutanes have been isolated.     

Experimentally determined thermodynamic properties of schapbachite (α-AgBiS2) below T = 700 K

Thermodynamic properties of schapbachite (α-AgBiS₂) in the phase assemblage α-AgBiS₂–AgBi₃S₅–Bi have been studied by an EMF-technique. The EMF-measurements were made on the galvanic cell Pt(−)|Ag|AgI|AgBiS₂ + AgBi₃S₅ + Bi|C|Pt(+), over the temperature range from (429 to 699) K. According to the EMF vs. temperature relations obtained, the enthalpy of the phase transformation from β-AgBi_1+xS₂ to α-AgBi_1+xS₂, at T = (465.55 ± 5) K, was calculated to be (7.3 ± 2.1) kJ · mol⁻¹. New experimentally determined thermodynamic properties of the bismuth-saturated schapbachite (α-AgBi_1+xS₂), for each temperature region of the stable phases Bi(s) and Bi(l), were generated and analysed in detail. Based on the experimental results, Gibbs free energies of sulfidation reactions including Ag, Bi(l), S₂(g), Ag₂S and Bi₂S₃ to produce the bismuth-saturated schapbachite (α-AgBi_1+xS₂) have been evaluated. It has been observed that within the temperature range from (474 to 680) K, schapbachite saturated with bismuth (α-AgBi_1+xS₂) is thermodynamically more stable than the stoichiometric schapbachite (α-AgBiS₂).     

Thermodynamic properties of tetraphenylantimony benzophenoxymate in the region of 0–450 K

Heat capacity of tetraphenylantimony benzophenoxymate Ph₄SbONCPh₂ is measured for first time using adiabatic calorimeter in the range from 6K to 350K and differential scanning calorimeter in the range from 330 K to 450 K. In the range of 400–450 K is revealed a melting accompanied with partial decomposition of the substance. Standard thermodynamic functions of crystalline Ph₄SbONCPh₂ in the range from T → 0 K to 440 K are calculated. Enthalpy of combustion of this compound is measured in a combustion calorimeter with isothermal cover and static bomb. Standard thermodynamic formation functions of crystalline Ph₄SbONCPh₂ at 298.15 K are calculated. Fractal dimension D is revealed.     

Synthesis,characterization and thermochemistry of Cs(ASP) · nH2O (n = 0, 1)

New compounds of aspartic acid Cs(ASP) · nH₂O (n = 0, 1) have been synthesized and characterized by XRD, IR and Raman spectroscopy as well as TG. The structural formula of this new compound was Cs(ASP) · nH₂O (n = 0, 1). The enthalpy of solution of Cs(ASP) · nH₂O (n = 0, 1) in water were determined. With the incorporation of the standard molar enthalpies of formation of CsOH(aq) and ASP(s), the standard molar enthalpy of formation of −(1202.9 ± 0.2) kJ · mol⁻¹ of Cs(ASP) and −(1490.7 ± 0.2) kJ · mol⁻¹ of Cs(ASP) · H₂O were obtained.     

On the physical properties of Sr1−xNaxRuO3 (x = 0–0.19)

The metallic ferromagnetic perovskite-type SrRuO₃ (T_C ～ 160 K) belongs to the “class” of materials with strongly correlated electrons. Nonetheless a simple ferromagnetism associated with isotropic interactions of low spin Ru⁴⁺ ions local moments is far too simple to explain the complex interplay between charge carriers and magnetic interactions. In that sense the suppression of ferromagnetism in isoelectronic Sr_1?xCa_xRuO₃ was tentatively associated to the increased lattice distortion influencing primarily the 4d Ru bandwidths and, hence, the itinerancy and respective populations of the spin-up and spin-down electrons.In order to probe the robustness of the metallic ferromagnetism against electron occupation of 4d Ru orbital we prepared and characterized polycrystalline Sr_1?xNa_xRuO₃ (x = 0.0–0.19) ceramics. The substitution of Sr²⁺ by Na¹⁺, leading to formally mixed valence Ru⁴⁺/Ru⁵⁺, induces the decrease of the Curie temperature and spin-wave stiffness, which was determined independently from magnetic and specific heat data. On the other hand the effective paramagnetic moment remains essentially unchanged. All compounds are metallic in a sense of electrical resistivity and thermopower temperature dependence; the low temperature upturn of the electrical resistivity was explained on a base of the weak localization. The metallic nature of the samples is corroborated by Pauli paramagnetism and high Sommerfeld coefficient γ, extracted from the low temperature specific heat, which increases from 30.9 mJ mol^?1 K^?2 (x = 0.0) to 43.0 mJ mol^?1 K^?2 (x = 0.19).     

Protonation thermodynamics of some aminophenol derivatives in NaCl(aq) (0 ⩽ I ⩽3 mol · kg−1) at T = 298.15 K

The acid–base properties of four aminophenol derivatives, namely m-aminophenol (L1), 4-amino-2-hydroxytoluene (L2), 2-amino-5-ethylphenol (L3) and 5-amino-4-chloro-o-cresol (L4), are studied by potentiometric and titration calorimetric measurements in NaCl_(aq) (0 ? I ? 3 mol · kg^?1) at T = 298.15 K. The dependence of the protonation constants on ionic strength is modelled by the Debye–Hückel, SIT (Specific ion Interaction Theory) and Pitzer equations. Therefore, the values of protonation constants at infinite dilution and the relative interaction coefficients are calculated. The dependence of protonation enthalpies on ionic strength is also determined. Distribution (2-methyl-1-propanol/aqueous solution) measurements allowed us to determine the Setschenow coefficients and the activity coefficients of neutral species. Experimental results show that these compounds behave in a very similar way, and common class parameters are reported, in particular for the dependence on ionic strength of both protonation constants and protonation enthalpies.     

Hyperconjugation versus back bonding in AH3−nXn species (A = Si and Ge; X = F,Cl and Br; and n = 1, 2 and 3)

In this research two competing phenomena, back bonding and hyperconjugation, have been investigated based on Natural Bond Orbital (NBO) and Atoms in Molecules (AIM) analyses for radical AH_3?nX_n species, where A = Si and Ge, and n = 1, 2 and 3. It is demonstrated in this article that both above phenomena will be occurred significantly, while back bonding is the only event in analogous compounds with carbon and hyperconjugation is rather negligible. It was also found that only one back bonding with the help of keyword $CHOOSE in NBO analysis can be found in this type of compounds with reasonable structure, while it can be sometimes detected in AH_3?nX_n without using keyword $CHOOSE. It is also shown that there is always an increase in bond length in comparison with reference molecules in mentioned species due to existing hyperconjugation, while if the central atom is carbon, we have always a decrease of bond length due to only having back bonding. Additionally, from AIM point of view, the delocalization indices for α-spin (majority spin) is more than β-spin (minority spin) in radical species for molecules without back bonding, while the situation in our compounds is quite reverse, which can be attributed to the π back bonding in the β-spin electrons.     

(Solid + liquid) equilibria for the ternary system (CsBr + LnBr3 + H2O) (Ln = Pr,Nd, Sm) at T = 298.2 K and atmospheric pressure,thermal and fluorescent properties of Cs2LnBr5·10H2O

The (solid + liquid) phase equilibria of the ternary systems (CsBr + LnBr₃ + H₂O) (Ln = Pr, Nd, Sm) at T = 298.2 K were studied by the isothermal solubility method. The solid phases formed in the systems were determined by the Schreinemakers wet residues technique, and the corresponding phase diagrams were constructed based on the measured data. Each of the phase diagrams, with two invariant points, three univariant curves, and three crystallization regions corresponding to CsBr, Cs₂LnBr₅·10H₂O and LnBr₃·nH₂O (n = 6, 7), respectively, belongs to the same category. The new solid phase compounds Cs₂LnBr₅·10H₂O are incongruently soluble in water, and they were characterized by chemical analysis, XRD and TG-DTG techniques. The standard molar enthalpies of solution of Cs₂PrBr₅·10H₂O, Cs₂NdBr₅·10H₂O and Cs₂SmBr₅·10H₂O in water were measured to be (52.49 ± 0.48) kJ · mol⁻¹, (49.64 ± 0.49) kJ · mol⁻¹ and (50.17 ± 0.48) kJ · mol⁻¹ by microcalorimetry under the condition of infinite dilution, respectively, and their standard molar enthalpies of formation were determined as being −(4739.7 ± 1.4) kJ · mol⁻¹, −(4728.4 ± 1.4) kJ · mol⁻¹ and −(4724.4 ± 1.4) kJ · mol⁻¹, respectively. The fluorescence excitation and emission spectra of Cs₂PrBr₅·10H₂O, Cs₂NdBr₅·10H₂O and Cs₂SmBr₅·10H₂O were measured. The results show that the upconversion spectra of the three new solid phase compounds all exhibit a peak at 524 nm when excited at 785 nm.     

Viscosity of {xCO2 + (1 − x)CH4} with x = 0.5174 for temperatures between (229 and 348) K and pressures between (1 and 32) MPa

A vibrating wire instrument, in which the wire was clamped at both ends, was used to measure the viscosity of {xCO₂ + (1 − x)CH₄} with x = 0.5174 with a combined uncertainty of 0.24 μPa · s (a relative uncertainty of about 0.8 %) at temperatures T between (229 and 348) K and pressures p from (1 to 32) MPa. The corresponding mass density ρ, estimated with the GERG-2008 equation of state, varied from (20 to 600) kg · m⁻³. The measured viscosities were consistent within combined uncertainties with data obtained previously for this system using entirely different experimental techniques. The new data were compared with three corresponding states-type models frequently used for predicting mixture viscosities: the Extended Corresponding States (ECS) model implemented in REFPROP 9.1; the SUPERTRAPP model implemented in MultiFlash 4.4; and a corresponding states model derived from molecular dynamics simulations of Lennard Jones fluids. The measured viscosities deviated systematically from the predictions of both the ECS and SUPERTRAPP models with a maximum relative deviations of 11 % at (229 K, 600 kg · m⁻³) and −16 % at (258 K, 470 kg · m⁻³), respectively. In contrast, the molecular dynamics based corresponding states model, which is predictive for mixtures in that it does not contain any binary interaction parameters, reproduced the density and temperature dependence of the measured viscosities well, with relative deviations of less than 4.2 %.