Controlled Bimodal Molecular‐Weight‐Distribution Polymers: Facile Synthesis by RAFT Polymerization

The RAFT agents RAFT‐1 and RAFT‐2 were used for RAFT polymerization to synthesize well‐defined bimodal molecular‐weight‐distribution (MWD) polymers. The system showed excellent controllability and “living” characteristics toward both the higher‐ and lower‐molecular‐weight fractions. It is important that bimodal higher‐molecular‐weight (HMW) polymers and block copolymers with both well‐controlled molecular weight (MW) and MWD could be prepared easily due to the “living” features of RAFT polymerization. The strategy realized a mixture of higher/lower‐molecular‐weight polymers at the molecular level but also preserved the features of living radical polymerization (LRP) of the RAFT polymerization.     

Facile synthesis of conjugated rod‐coil block copolymers

A facile synthetic approach of conjugated rod‐coil block copolymers with poly(para‐phenylene) as the rod block and polystyrene or polyethylene glycol as the coil block was developed. The block copolymers were synthesized through a TEMPO‐mediated radical polymerization of 3,5‐cyclohexadiene‐1,2‐diol‐derived monomers (diacetate, dibenzonate, and dicarbonate), followed by thermal aromatization of the polymer precursor. The living character of the polymerization and the structure of the copolymers were studied by NMR, GPC, TGA, and UV–vis spectroscopy. The average conjugation lengths of the copolymers were calculated according to their maxima in UV–vis spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 800–808, 2007     

Recent developments in entropy‐driven ring‐opening metathesis polymerization: Mechanistic considerations,unique functionality,and sequence control

Entropy‐driven ROMP (ED‐ROMP) involves polymerization of olefin‐containing macrocyclic monomers under entropically favorable conditions. Macrocycles can be prepared from a variety of interesting molecules which, when polymerized, impart unique functionality to the resulting polymer backbone such as degradable linkages, biological moieties, crystallizable groups, or supramolecular hosts. In addition, the sequence of atoms in the cyclic monomer is preserved within the polymer repeating units, allowing for facile preparation of sequence‐defined polymers. In this review article, we consider how the mechanism of ROMP applies to ED polymerizations, how olefinic macrocycles are synthesized, and how polymerization conditions can be tuned to maximize conversion. Recent works in the past 10 years are highlighted, with emphasis on methods which can be employed to achieve fast polymerization kinetics and/or selective head‐to‐tail regiochemistry, thus improving polymerization control. ED‐ROMP, with its unique capability to produce polymers with well‐defined polymer backbone microstructure, represents an essential complement to other, well‐established, metathesis methodologies such as ROMP. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1621–1634     

Synthesis of mikto‐topology star polymer containing one cyclic arm

Well‐defined mikto‐topology star polystyrene composed of one cyclic arm and four linear arms was synthesized by a combination of atom transfer radical polymerization (ATRP) and Cu‐catalyzed azide‐alkyne cycloaddition (CuAAC) click reaction. First, the bromine‐alkyne α,ω‐linear polystyrenes containing four hydroxyl groups protected with acetone‐based ketal groups were synthesized by ATRP of styrene using a designed initiator. Then, the bromine end‐group was converted to the azide and the linear polystyrene was cyclized intra‐molecularly by the CuAAC reaction. The four hydroxyl groups were released by deprotection and then esterified with 2‐bromoisobutyryl bromide to produce a cyclic polymer bearing four ATRP initiating units. By subsequent ATRP of styrene to grow linear polymers with the cyclic polystyrene as a macroinitiator, the mikto‐topology star polymers were prepared. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Advanced Developments in Cyclic Polymers: Synthesis,Applications, and Perspectives

Due to the topological effect, cyclic polymers demonstrate different and unique physical and biological properties in comparison with linear counterparts having the same molecular-weight range. With advanced synthetic and analytic technologies, cyclic polymers with different topologies, e.g. multicyclic polymers, have been reported and well characterized. For example, various cyclic DNA and related structures, such as cyclic duplexes, have been prepared conveniently by click chemistry. These types of DNA have increased resistance to enzymatic degradation and have high thermodynamic stability, and thus, have potential therapeutic applications. In addition, cyclic polymers have also been used to prepare organic–inorganic hybrids for applications in catalysis, e.g. catalyst supports. Due to developments in synthetic technology, highly pure cyclic polymers could now be produced in large scale. Therefore, we anticipate discovering more applications in the near future. Despite their promise, cyclic polymers are still less explored than linear polymers like polyolefins and polycarbonates, which are widely used in daily life. Some critical issues, including controlling the molecular weight and finding suitable applications, remain big challenges in the cyclic-polymer field. This review briefly summarizes the commonly used synthetic methodologies and focuses more on the attractive functional materials and their biological properties and potential applications.     

Facile and versatile synthesis of rod‐coil poly(3‐hexylthiophene)‐based block copolymers by nitroxide‐mediated radical polymerization

A well‐defined and monofunctional poly(3‐hexylthiophene)‐based (P3HT) macroinitiator has been obtained through a clean, simple, and an efficient multistep synthesis process. The macroinitiator is obtained via intermolecular radical 1,2‐addition onto an ω‐acrylate‐terminated P3HT macromonomer. In a second step, well‐defined rod‐coil block copolymers were obtained by nitroxide‐mediated radical polymerization (NMRP) using the so‐called Blocbuilder^®. The polymerization was found to be controlled with various monomers such as styrene, isoprene, 4‐vinylpyridine, or methyl acrylate. This process constitutes a very promising way to obtain versatile and clean materials for organic electronics. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and evaluation of an ester‐functional alkoxyamine for nitroxide‐mediated polymerization

The ester‐functional alkoxyamine 2,2‐dimethyl‐3‐(1‐(4‐(methoxycarbonyl)phenyl)ethoxy)‐4‐(4‐(methoxycarbonyl)phenyl)‐3‐azapentane ( 2 ) was efficiently synthesized for use as a functional initiator in nitroxide‐mediated polymerization. Two equivalents of 1‐(4‐(methoxycarbonyl)phenyl)ethyl radical were added across the double bond of 2‐methyl‐2‐nitrosopropane to form alkoxyamine 2 , which was found to control the polymerization of styrene, isoprene, and n‐butyl acrylate. The ester moieties were hydrolyzed for subsequent esterification with 1‐pyrenebutanol to form a dipyrene‐labeled initiator that was used to probe nitroxide end‐group fidelity after styrene polymerization. High retention of nitroxide was confirmed by UV‐vis studies over a range of monomer conversions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6342–6352, 2009     

Synthesis of high‐order multiblock core cross‐linked star polymers

Core cross‐linked star (CCS) polymers with radiating arms composed of high‐order multiblock copolymers have been synthesized in a one‐pot system via iterative copper‐mediated radical polymerization. The employed “arm‐first” technique ensures the multiblock sequence of the macroinitiator is carried through to the star structure with no arm defects. The versatility of this approach is demonstrated by the synthesis of three distinct star polymers with differing arm compositions, two with an alternating ABABAB block sequence and one with six different block units (i.e. ABCDEF). Owing to the star architecture, CCS polymers in which the arm composition consists of alternating hydrophilic–hydrophobic (ABABAB) segments undergo supramolecular self‐assembly in selective solvents, whereas linear polymers with the same block sequence did not yield self‐assembled structures, as evidenced by DLS analysis. The combination of microstructural and topological control in CCS polymers offers exciting possibilities for the development of tailor‐made nanoparticles with spatially defined regions of functionality. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 135–143     

New Strategy Targeting Well‐Defined Polymethylene‐block‐Polystyrene Copolymers: The Combination of Living Polymerization of Ylides and Atom Transfer Radical Polymerization

Well‐defined polymethylene‐block‐polystyrene (PM‐b‐PS) diblock copolymers were synthesized via a combination of living polymerization of ylides and atom transfer radical polymerization (ATRP) of styrene. A series of hydroxyl‐terminated polymethylenes (PM‐OHs) with different molecular weight and narrow molecular weight distribution were prepared using living polymerization of ylides following efficient oxidation in a quantitive functionality. Then, the macroinitiators (PM‐MIs ( = 1 900–15 000; PDI = 1.12–1.23)) transformed from PM‐OHs in ≈ 100% conversion initiated ATRPs of styrene to construct PM‐b‐PS copolymers. The GPC traces indicated the successful extension of PS segment ( of PM‐b‐PS = 5 000–41 800; PDI = 1.08–1.23). Such copolymers were characterized by ¹H NMR and DSC.

     

Tunable Thermoresponsive Pyrrolidone‐Based Polymers from Pyroglutamic Acid,a Bio‐Derived Resource

A series of pyrrolidone‐based polymers is prepared from pyroglutamic acid, a bio‐derived resource. Polymers bearing simple alkoxy substituents (e.g., methoxy, ethoxy, and butoxy) are soluble in common organic solvents and possess glass transition temperatures that are dependent on the length of the alkoxy residue. Replacing these substituents with an ether moiety (CH₃OCH₂CH₂O—) affords a highly sensitive and reversible thermoresponsive polymer with a lower critical solution temperature (LCST) of 42 °C in water. Copolymers composed of repeat units bearing both the ether and simple alkoxy residues are found to exhibit LCSTs that are highly dependent on the nature of the hydrophobic alkoxy residue suggesting that the LCSTs of these polymers can be successfully tuned by simply tailoring the copolymer structure.     

Synthesis and characterization of novel photoactive polymer poly(vinyl alcohol)‐graft‐poly(vinyl naphthalene)

A copolymer of poly(vinyl naphthalene) grafted onto poly(vinyl alcohol) has been synthesized with nitroxide‐mediated controlled radical polymerization. By separating the processes of the generation of grafting sites and polymerization, we can avoid the formation of the homopolymer. Because of its architecture, the polymer is soluble in water, despite the high content of hydrophobic groups. The naphthalene chromophores tend to aggregate, forming hydrophobic microdomains in an aqueous solution. Those aggregates exist in a very constrained environment that leads to extraordinarily large redshifts of both the absorption and emission of the polymer. The polymer acts as an efficient photosensitizer in photoinduced electron transfer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2675–2683, 2006     

Copper‐Mediated Reversible Deactivation Radical Polymerization in Aqueous Media

Key advances within the past 10 years have transformed copper‐mediated radical polymerization from a technique which was not very tolerant of protic media into a range of closely related processes capable of controlling the polymerization of a wide range of monomers in pure water at ppm catalyst loadings. This approach has afforded water‐soluble macromolecules of desired molecular weight, architecture, and chemical functionality, with applications ranging from drug delivery to oil processing. In this Review we highlight and critically evaluate the synthetic methods that have been developed to control radical polymerization in water by using copper complexes as well as identify future areas of interest and challenges still to be overcome.     

Synthesis of fluorescent,dansyl end‐functionalized PMMA and poly(methyl methacrylate‐b‐phenanthren‐1‐yl‐methacrylate) diblock copolymers,at ambient temperature

The polymerization of MMA, at ambient temperature, mediated by dansyl chloride is investigated using controlled radical polymerization methods. The solution ATRP results in reasonably controlled polymerization with PDI < 1.3. The SET‐LRP polymerization is less controlled while SET‐RAFT polymerization is controlled producing poly(methyl methacrylate) (PMMA) with the PDI < 1.3. In all the cases, the polymerization rate followed first order kinetics with respect to monomer conversion and the molecular weight of the polymer increased linearly with conversion. The R group in the CTAs do not appear to play a key role in controlling the propagation rate. SET‐RAFT method appears to be a simpler tool to produce methacrylate polymers, under ambient conditions, in comparison with ATRP and SET‐LRP. Fluorescent diblock copolymers, P(MMA‐b‐PhMA), were synthesized. These were highly fluorescent with two distinguishable emission signatures from the dansyl group and the phenanthren‐1‐yl methacrylate block. The fluorescence emission spectra reveal interesting features such as large red shift when compared to the small molecule. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of Multivalent Organotellurium Chain‐Transfer Agents by Post‐modification and Their Applications in Living Radical Polymerization

Functionalized or multivalent organotellurium chain‐transfer agents (CTAs) for living radical polymerization were synthesized by post‐modification, which involved the condensation between a carboxylic‐acid‐functionalized CTA and various amines in excellent yields without affecting the reactive tellurium moiety. The CTAs exhibited high synthetic versatility for radical polymerization and gave structurally well‐controlled polymers, such as multiarmed polymers, from various monomers. Because all new CTAs are easily available on a large scale by simple purification, the current method significantly facilitates macromolecular engineering based on organotellurium‐mediated radical polymerization (TERP).     

Rapid Synthesis of Block and Cyclic Copolymers via Click Chemistry in the Presence of Copper Nanoparticles

A new method for the rapid and efficient coupling of homopolymers to yield di- and triblock copolymers as well as cyclic polymers using the 3 + 2 π Huisgen copper catalyzed cyclo-addition reaction has been developed. This facile method utilizes commercially available Cu nanoparticles that are tolerant to O(2), easily removable and recyclable.     

Combinatorial Low‐Volume Synthesis of Well‐Defined Polymers by Enzyme Degassing

The synthesis of well‐defined polymers in a low‐volume, combinatorial fashion has long been a goal in polymer chemistry. Here, we report the preparation of a wide range of highly controlled homo and block co‐polymers by Enz‐RAFT (enzyme‐assisted reversible addition–fragmentation chain transfer) polymerization in microtiter plates in the open atmosphere. The addition of 1 μm glucose oxidase (GOx) to water/solvent mixtures enables polymerization reactions to proceed in extremely low volumes (40 μL) and low radical concentrations. This procedure provides excellent control and high conversions across a range of monomer families and molecular weights, thus avoiding the need to purify for screening applications. This simple technique enables combinatorial polymer synthesis in microtiter plates on the benchtop without the need of highly specialized synthesizers and at much lower volumes than is currently possible by any other technique.     

The First Example of Main‐Chain Cyclic Azobenzene Polymers

A novel main‐chain azobenzene cyclic polymer, cyclic‐PEHPA, has been successfully synthesized by ‘click’ cyclization of the α‐alkyne‐ω‐azido hetero‐difunctional linear precursors (linear‐PEHPA), which is synthesized by a step‐growth polymerization of the 3′‐ethynylphenyl[4‐hexyl‐(2‐azido‐2‐methyl‐ propionate) phenyl] azobenzene (EHPA). Gel permeation chromatography, and ¹H NMR and FT‐IR spectra confirmed the complete transformation of linear‐PEHPA into cyclic‐PEHPA. With the same molecular weights, the cyclic‐PEHPAs are found to have higher glass transition temperatures than the linear‐PEHPAs, but almost the same decomposition temperatures. In addition, the obtained cyclic azobenzene polymer with lower molar mass shows a slightly better trans–cis–trans photoisomerization ability than the corresponding linear‐PEHPA.

     

Synthesis of High Molecular Weight Cyclic Poly(ε‐caprolactone)s of Variable Ring Size Based on a Light‐Induced Ring‐Closure Approach

High molecular weight cyclic poly(ε‐caprolactone)s (cPCLs) with variable ring size are synthesized via light‐induced ring closure of α,ω‐anthracene‐terminated PCL (An‐PCL‐An). The ring size of cPCL is tunable simply by adjusting the polymer concentration from 10 to 100 mg mL⁻¹ in THF. The cyclo­addition via the bimolecular cyclization of An‐PC‐An is well characterized by a variety of analyses such as ¹H NMR and UV–vis spectroscopies, gel‐permeation chromatography, and differential scanning calorimetry. The reversible dimerization of An induced by heating enables the cyclic PCL to have a switchable “on–off” capability. This novel light‐induced ring‐closure technique can be one of the most powerful candidates for producing various well‐defined cyclic polymers in highly concentrated polymer solution.

     

Synthesis of Well‐Defined Figure‐of‐Eight‐Shaped Polymers by a Combination of ATRP and Click Chemistry

Well‐defined figure‐of‐eight‐shaped (8‐shaped) polystyrene (PS) with controlled molecular weight and narrow polydispersities has been prepared by the combination of atom transfer radical polymerization (ATRP) and click chemistry. The synthesis involves two steps: 1) Preparation of a linear tetrafunctional PS with two azido groups, one at each end of the polymer chain, and two acetylene groups at the middle of the chain. 2) Intramolecular cyclization of the linear tetrafunctional PS at a very low concentration by a click reaction to produce the 8‐shaped polystyrenes. The resulting intermediates and the target polymers were characterized by ¹H NMR and FT‐IR spectroscopy, and gel permeation chromatography. The glass transition temperatures (T_gs) were determined by differential scanning calorimetry and it was found that the decrease in chain mobility by cyclization resulted in higher T_gs for 8‐shaped polystyrenes as compared to their corresponding precursors.

     

Radical polymerization behavior of a vinyl monomer bearing five‐membered cyclic carbonate structure and reactions of the obtained polymers with amines

Radical polymerization behavior of a vinyl substituted cyclic carbonate, 4‐phenyl‐5‐vinyl‐1,3‐dioxoran‐2‐one ( 1 ), is described. Radical polymerization of 1 proceeded through selective vinyl polymerization to produce polymers bearing carbonate groups in the side chain, in contrast to that of an oxirane analogue of 1 , 1‐phenyl‐2‐vinyl oxirane that proceeds via the selective ring‐opening fashion. Although the homopolymerization of 1 produce polymers in relatively lower yield, copolymerizations effectively provided cyclic carbonate‐containing copolymers. Nucleophilic addition of primary amines to the resulting homopolymers and copolymers produced the corresponding multifunctional polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 584–592, 2005