Hierarchical semicrystalline block copolymer nanoparticles are produced in a segmented gas‐liquid microfluidic reactor with top‐down control of multiscale structural features, including nanoparticle morphologies, sizes, and internal crystallinities. Control of multiscale structure on disparate length scales by a single control variable (flow rate) enables tailoring of drug delivery nanoparticle function including release rates.
The self‐assembled nanostructures of a high‐molecular‐weight rod–coil block copolymer, poly(styrene‐block‐(2,5‐bis[4‐methoxyphenyl]oxycarbonyl)styrene) (PS‐b‐PMPCS), in p‐xylene are studied. The cylindrical micelles, long segmental cylindrical micelle associates, spherical micelles, and spherical micelle associates are observed with increased copolymer concentration. The high molecular weight of PS leads to the entanglement between PS chains from different micelles, which is the force for supramolecular interactions. Short cylindrical micelles are connected end‐to‐end via this supramolecular chemistry to form long segmental cylindrical micelle associates, analogue to the condensation polymerization process, with direction and saturation. On the other hand, spherical micelles assemble via supramolecular chemistry to form spherical micelle associates, yet without any direction due to their isotropic properties.
Recently, polymer drug conjugates (PDCs) have attracted considerable attention in the treatment of cancer. In this work, a simple strategy has been developed to make PDCs of an antitumor alkylating agent, chlorambucil, using a biocompatible disulphide linker. Chlorambucil‐based chain transfer agent was used to prepare various homopolymers and block copolymers in a controlled fashion via reversible addition–fragmentation chain transfer polymerization. Chlorambucil conjugated block copolymer, poly(polyethylene glycol monomethyl ether methacrylate)‐b‐poly(methyl methacrylate), formed nanoaggregates in aqueous solutions, which are characterized by dynamic light scattering and field emission‐scanning electron microscopy. Finally, the simplicity of the design is exemplified by performing a release study of chlorambucil under reducing condition by using D,L‐dithiothreitol.
Using the third‐generation Grubbs catalyst, the living ring‐opening metathesis polymerization of ferrocene/cobalticenium copolymers is conducted with theoretical numbers of 25 monomer units for each block, and their redox and electrochemical properties allow using the Bard–Anson electrochemical method to determine the number of metallocenyl units in each block.
Nanoporous thin films with pore size of sub‐10 nm are fabricated using an acid‐cleavable block copolymer (BCP), a benzoic imine junction between poly(ethylene oxide) (PEO) and poly(methacrylate) (PMAAz) bearing an azobenzene side chain (denoted as PEO‐bei‐PMAAz) as the precursor. After a thermal annealing, the block copolymers are self‐assembled to form highly ordered PEO cylinders within a PMAAz matrix normal to the film, even in the case of low BCP molecular weight due to the existing of the liquid crystalline (LC) azobenzene rigid segment. Thus, PMAAz thin films with pore size of ≈7 nm and density of ≈1012 cm−2 are obtained after removal of the PEO minor phase by breaking the benzoic imine junction under mild acidic conditions. This work enriches the nanoporous polymer films from BCP precursors and introduces the LC property as a functionality which can further enhance the mechanical properties of the films and broaden their applications.
Dissipative particle dynamics simulation is employed to study the chain exchange kinetics between micelles of diblock copolymer in aqueous solution via in silico hybridization method. One focus is placed on the effect of chain flexibility on the dynamic behavior by varying the spring constant in the bead‐spring model. The length ratio of hydrophilic to hydrophobic block is also varied. It is found that chain expulsion/insertion is the dominant mechanism in the chain exchange process. The most interesting finding is the multimodal relaxation behavior for the chain exchange and expulsion when the spring constant is small or the length ratio of hydrophilic to hydrophobic block is large. This phenomenon is due to an increase in size polydispersity of micelles with rising population of small aggregates/micelles, for which the exchange kinetics is faster. Micelles with larger aggregation numbers (>10) are found to follow single exponential relaxation kinetics.
Photoinitiated reversible addition‐fragmentation chain transfer (RAFT) dispersion polymerization of 2‐hydroxypropyl methacrylate is conducted in water at low temperature using thermoresponsive copolymers of 2‐(2‐methoxyethoxy) ethyl methacrylate and oligo(ethylene glycol) methacrylate (Mn = 475 g mol−1) as the macro‐RAFT agent. Kinetic studies confirm that quantitative monomer conversion is achieved within 15 min of visible‐light irradiation (405 nm, 0.5 mW cm−2), and good control is maintained during the polymerization. The polymerization can be temporally controlled by a simple “ON/OFF” switch of the light source. Finally, thermoresponsive diblock copolymer nano‐objects with a diverse set of complex morphologies (spheres, worms, and vesicles) are prepared using this particular formulation.
Well‐defined ABC triblock copolymers based on two hydrophilic blocks, A and C, and a hydrophobic block B are synthesized and their self‐assembly behavior is investigated. Interestingly, at the same solvent, concentration, pH, and temperature, different shape micelles are observed, spherical and worm‐like micelles, depending on the preparation method. Specifically, spherical micelles are observed with bulk rehydration while both spherical and worm‐like micelles are observed with film rehydration.
The combination of dendritic and linear polymeric structures in the same macromolecule opens up new possibilities for the design of block copolymers and for applications of functional polymers that have self‐assembly properties. There are three main strategies for the synthesis of linear‐dendritic block copolymers (LDBCs) and, in particular, the emergence of click chemistry has made the coupling of preformed blocks one of the most efficient ways of obtaining libraries of LDBCs. In these materials, the periphery of the dendron can be precisely functionalised to obtain functional LDBCs with self‐assembly properties of interest in different technological areas. The incorporation of stimuli‐responsive moieties gives rise to smart materials that are generally processed as self‐assemblies of amphiphilic LDBCs with a morphology that can be controlled by an external stimulus. Particular emphasis is placed on light‐responsive LDBCs. Furthermore, a brief review of the biomedical or materials science applications of LDBCs is presented.
Recombinant protein design allows modular protein domains with different functionalities and responsive behaviors to be easily combined. Inclusion of these protein domains can enable recombinant proteins to have complex responses to their environment (e.g., temperature‐triggered aggregation followed by enzyme‐mediated cleavage for drug delivery or pH‐triggered conformational change and self‐assembly leading to structural stabilization by adjacent complementary residues). These “smart” behaviors can be tuned by amino acid identity and sequence, chemical modifications, and addition of other components. A wide variety of domains and peptides have smart behavior. This review focuses on protein designs for self‐assembly or conformational changes due to stimuli such as shifts in temperature or pH.
Deviating from the traditional formation of block copolymer derived isoporous membranes from one block copolymer chemistry, here asymmetric membranes with isoporous surface structure are derived from two chemically distinct block copolymers blended during standard membrane fabrication. As a first proof of principle, the fabrication of asymmetric membranes is reported, which are blended from two chemically distinct triblock terpolymers, poly(isoprene‐b‐styrene‐b‐(4‐vinyl)pyridine) (ISV) and poly(isoprene‐b‐styrene‐b‐(dimethylamino)ethyl methacrylate) (ISA), differing in the pH‐responsive hydrophilic segment. Using block copolymer self‐assembly and nonsolvent induced phase separation process, pure and blended membranes are prepared by varying weight ratios of ISV to ISA. Pure and blended membranes exhibit a thin, selective layer of pores above a macroporous substructure. Observed permeabilities at varying pH values of blended membranes depend on relative triblock terpolymer composition. These results open a new direction for membrane fabrication through the use of mixtures of chemically distinct block copolymers enabling the tailoring of membrane surface chemistries and functionalities.
The preparation and aqueous self‐assembly of newly Y‐shaped amphiphilic block polyurethane (PUG) copolymers are reported here. These amphiphilic copolymers, designed to have two hydrophilic poly(ethylene oxide) (PEO) tails and one hydrophobic alkyl tail via a two‐step coupling reaction, can self‐assemble into giant unilamellar vesicles (GUVs) (diameter ≥ 1000 nm) with a direct dissolution method in aqueous solution, depending on their Y‐shaped structures and initial concentrations. More interesting, the copolymers can self‐assemble into various distinct nano‐/microstructures, such as spherical micelles, small vesicles, and GUVs, with the increase of their concentrations. The traditional preparation methods of GUVs generally need conventional amphiphilic molecules and additional complicated conditions, such as alternating electrical field, buffer solution, or organic solvent. Therefore, the self‐assembly of Y‐shaped PUGs with a direct dissolution method in aqueous solution demonstrated in this study supplies a new clue to fabricate GUVs based on the geometric design of amphiphilic polymers.
The present review focuses on the recent progress made in thin film orientation of semi‐conducting polymers with particular emphasis on methods using epitaxy and shear forces. The main results reported in this review deal with regioregular poly(3‐alkylthiophene)s and poly(dialkylfluorenes). Correlations existing between processing conditions, macromolecular parameters and the resulting structures formed in thin films are underlined. It is shown that epitaxial orientation of semi‐conducting polymers can generate a large palette of semi‐crystalline and nanostructured morphologies by a subtle choice of the orienting substrates and growth conditions.
Here, the preparation of a novel block copolymer consisting of a statistical copolymer N‐(2‐hydroxypropyl) methacrylamide‐s‐N‐(3‐aminopropyl) methacrylamide and a short terminal 3‐guanidinopropyl methacrylamide block is reported. This polymer structure forms neutral but water‐soluble nanosized complexes with siRNA. The siRNA block copolymer complexes are first analyzed using agarose gel electrophoresis and their size is determined with fluorescence correlation spectroscopy. The protective properties of the polymer against RNA degradation are investigated by treating the siRNA block copolymer complexes with RNase V1. Heparin competition assays confirm the efficient release of the cargo in vitro. In addition, the utilization of microscale thermophoresis is demonstrated for the determination of the binding strength between a fluorescently labeled polyanion and a polymer molecule.
By simply blending two diblock copolymers with the same chemistry but with different compositions one is able to create well‐defined larger soft nanoparticles as well as bimodal soft nanoparticles. Specifically, blending two diblock copolymers in a solvent good for both blocks followed by a gradual introduction of a non‐solvent results in a mixed micelle, larger than their pure block‐copolymer‐forming micelles. The formation of well‐defined larger micelle is due to the balance between the ability of the mixed micelles to assemble or merge in comparison to their pure diblock copolymer micelles. Evidently, the blending ratio, the mixing protocol, and non‐solvent addition rate are crucial to achieving well‐defined larger or bimodal micelles.
Polymer nanoparticles are prepared by self‐assembly of visible light and pH sensitive perylene‐functionalized copolymers which are synthesized by quaternization between 1‐(bromomethyl)perylene and the dimethylaminoethyl units of poly(dimethylaminoethyl methacrylate) (PDMAEMA). The perylene‐containing polymethacrylate segments afford the system visible light responsiveness and the unquaternized PDMAEMA segments afford the system pH responsiveness. The self‐assembled nanoparticles exhibit a unique dual stimuli response. They can be photocleaved under visible light irradiation, shrunken to smaller nanoparticles at high pH, and swollen at low pH. The structural change endows the nanoparticle with great potential as a sensitive nanocarrier for controlled release of Nile Red and lysozyme under this stimulation. The visible light responsiveness and synergistic effect on the release of loaded molecules with the dual stimulation may obviate the need for harsh conditions such as UV light or extreme pH stimulation, rendering the system more applicable under mild conditions.
A statistical–mechanical theory of thermoreversible gelation which is formed by monodisperse telechelic associating polymers with junction multiplicity of three is developed. In the present theory, the effect of loop formation is considered. Using the theory, the properties of the system are obtained, such as the state of association of polymers, the sol–gel transition line, and the number concentration of elastically effective chains. In addition, a Monte Carlo simulation of a bead‐spring model of monodisperse telechelic associating polymers is performed. The simulation results are in good agreement with the present theoretical results. Furthermore, the shear modulus is calculated by an application of phantom network theory and compared with the experimental data. The theoretical results agree well with the experimental results. It is shown that the loop formation occurs especially in dilute regime and causes the decrease of the modulus in the regime.
A thiofunctional thiazolidine is introduced as a new low‐molar‐mass building block for the introduction of cysteine residues via a thiol‐ene reaction. Allyl‐functional polyglycidol (PG) is used as a model polymer to demonstrate polymer‐analogue functionalization through reaction with the unsaturated side‐chains. A modified trinitrobenzenesulfonic acid (TNBSA) assay is used for the redox‐insensitive quantification and a precise final cysteine content can be predetermined at the polymerization stage. Native chemical ligation at cysteine‐functional PG is performed as a model reaction for a chemoselective peptide modification of this polymer. The three‐step synthesis of the thiofunctional thiazolidine reactant, together with the standard thiol‐ene coupling and the robust quantification assay, broadens the toolbox for thiol‐ene chemistry and offers a generic and straightforward approach to cysteine‐functional materials.
To enhance the limited degradability of poly(ethylene glycol) (PEG), a straightforward method of synthesizing poly[(ethylene glycol)‐co‐(glycolic acid)] (P(EG‐co‐GA)) via a ruthenium‐catalyzed, post‐polymerization oxyfunctionalization of various PEGs is developed. Using this method, a set of copolymers with GA compositions of up to 8 mol% are prepared with minimal reduction in molecular weight (<10%) when compared to their commercially available starting materials. The P(EG‐co‐GA) copolymers are shown to undergo hydrolysis under mild conditions.
Reversible addition‐fragmentation chain transfer polymerization yields reactive block copolymers bearing the pentafluorophenyl ester (PFPA) group, and subsequent Click amidation using 2,2,6,6‐tetramethylpiperidine‐N‐oxyl‐ and imidazolium‐functionalized primary amines produces the corresponding functional block copolymers, leading to installation of statistical radical‐ and ionic sites into the PFPA segment. The monolayered thin film devices fabricated using the obtained block copolymers exhibit repeatable switching of electric conductivity (on/off ratio > 103) under a bias voltage, which reveals that the coexistence of radicals and ions in the same spherical domain of the copolymer layer is a prerequisite for repeatable switching memory.
