Entropy-driven adsorption of carbon nanotubes on (0 0 1) and (1 1 1) surfaces of CeO2 islands grown on sapphire substrate

According to the aim to compose combinatorial material by adsorption of carbon nanotubes onto the structured CeO₂ surface the interaction of the armchair (5,5) and zigzag (8,0) nanotubes with the (0 0 1) and (1 1 1) surfaces of CeO₂ islands have been investigated by theoretical methods. The thermodynamics of the adsorption were studied at the low surface coverage region. The interaction energy between the nanotube and the different CeO₂ surfaces shows significant increase when the size of the interface reaches 7–8 unit cells of CeO₂ and it remains unchanged in the larger interface region. However, the entropy term of the adsorption is significantly high when the distances of CeO₂ islands are equal to 27 nm (adsorption of armchair (5,5) nanotube) or 32 nm (adsorption of zigzag (8,0) nanotube). This property supports adsorption of nanotubes onto CeO₂ surfaces which possesses a very specific surface morphology. A long-wave vibration of nanotubes was identified as background of this unexpected phenomenon. This observation could be applicable in the development of such procedures where the nanotube adsorption parallel to the surface is aimed to perform.     

A high (0 0 1)-oriented CoPt/Ag film deposited on glass substrate

The magnetic properties and structures of CoPt_15 nm/Ag_0−100 nm films deposited by DC magnetron sputtering on glass substrates have been studied. The (0 0 1) texturing was improved by introducing an Ag underlayer. As the Ag underlayer thickness was 100 nm, a nearly perfect (0 0 1)-textured CoPt film was obtained.     

Improved electrical parameters of vacuum annealed Ni/4H-SiC (0 0 0 1) Schottky barrier diode

The reported work has been focused on the improvement of electrical parameters of Schottky diode using vacuum annealing at mild temperature in Ar gas ambient. Nickel Schottky barrier diodes were fabricated on 50 μm epitaxial layer of n-type 4H-SiC (0 0 0 1) substrate. The values of leakage current, Schottky barrier height (?_B), ideality factor (η) and density of interface states (N_SS) were obtained from experimentally measured current–voltage (I–V) and capacitance–voltage (C–V) characteristics before and after vacuum annealing treatment. The data revealed that ?_B, η and reverse leakage current for the as-processed diodes are 1.25 eV, 1.6 and 1.2 nA (at ?100 V), respectively, while for vacuum annealed diodes these parameters are 1.36 eV, 1.3 and 900 pA (at same reverse voltage). Improved characteristics have been resulted under the influence of vacuum annealing because of lesser number of minority carrier generation due to incessant reduction of number of available discrete energy levels in the bandgap of 4H-SiC substrate and lesser number of interface states density at Ni/4H-SiC (0 0 0 1) interface.     

Formation of native oxide crystallites on GaSe(0 0 1) surface

The process of GaSe native oxide formation was studied using atomic-force microscopy. It was found that the oxide film growth is accompanied by a work function increase. This increase saturates in several hours. The illumination by 1 mW laser at 650 nm stimulates the oxidation process. Continuous illumination changes the work function by 1 eV and that is 2 times higher than that without irradiation. It is supposed that the oxide formation occurs at edge dislocation lines.     

Acetaldehyde photochemistry on TiO2(1 1 0)

The ultraviolet (UV) photon induced decomposition of acetaldehyde adsorbed on the oxidized rutile TiO₂(1 1 0) surface was studied with photon stimulated desorption (PSD) and thermal programmed desorption (TPD). Acetaldehyde desorbs molecularly from TiO₂(1 1 0) with minor decomposition channels yielding butene on the reduced TiO₂ surface and acetate on the oxidized TiO₂ surface. Acetaldehyde adsorbed on oxidized TiO₂(1 1 0) undergoes a facile thermal reaction to form a photoactive acetaldehyde–oxygen complex. UV irradiation of the acetaldehyde–oxygen complex initiated photofragmentation of the complex resulting in the ejection of methyl radical into gas phase and conversion of the surface bound fragment to formate.     

Effect of substrate temperature on few-layer graphene grown on Al2O3 (0 0 0 1) via direct carbon atoms deposition

Few-layer graphene (FLG) was grown on Al₂O₃ (0 0 0 1) substrates at different temperatures via direct carbon atoms deposition by using solid source molecular beam epitaxy (SSMBE) method. The structural properties were characterized by reflection high energy electron diffraction (RHEED), Raman spectroscopy and near-edge X-ray absorption fine-structure (NEXAFS). The results showed that the FLG started to form at the substrate temperature of 700 °C. When the substrate temperature increased to 1300 °C, the quality of the FLG was the best and the layer number was estimated to be less than 5. At higher substrate temperature (1400 °C or above), the crystalline quality of the FLG would be deteriorated. Our experiment results demonstrated that the substrate temperature played an important role on the FLG layer formation on Al₂O₃ (0 0 0 1) substrates and the related growth mechanism was briefly discussed.     

EUV and soft X-ray photoelectron spectroscopy of isolated atoms and molecules using single-order laser high-harmonics at 42 eV and 91 eV

Photoelectron spectroscopy of isolated atoms and molecules using single-order high-harmonics of Ti:Sapphire laser pulses (800 nm, 12 fs/30 fs) is demonstrated. Dielectric multilayer mirrors, SiC/Mg and Mo/Si, are used to isolate the 27th (42 eV) and 59th (91 eV) order harmonics, respectively. The obtained harmonics are characterized by valence and inner-shell photoelectron spectroscopy of Xe. The applications to two-color two-photon ionization of He and pump-probe spectroscopy of ultrafast photodissociation of Br₂, Br₂(C¹Π_u) → Br(²P_3/2) + Br(²P_3/2), are presented.     

Influence of growth temperature and deposition duration on the structure,surface morphology and optical properties of InN/YSZ (1 0 0)

InN films with the wurtzite structure have been grown directly on YSZ (1 0 0) substrate by the RF-magnetron sputtering technique. Strongly (0 0 2) oriented films with smooth surfaces (0.7–2.9 nm surface roughness depending on substrate temperature), were grown within 30 min. Films deposited for 60 min developed three-dimensional (3D) pyramidal islands on top of their surfaces, which diminished the residual elastic strain. The optical absorption edge and PL peak energy around 1.7 eV were found to redshift with increasing film thickness and substrate temperature.     

Synthesis and characterization of layered Li1−x(Ni0.5Co0.5)1−yFeyO2(0 ≤ (1 − x) ≤ 1 and 0 ≤ y ≤ 0.2) cathodes

Layered Li(Ni_0.5Co_0.5)_1−yFe_yO₂ cathodes with 0 ≤ y ≤ 0.2 have been synthesized by firing the coprecipitated hydroxides of the transition metals and lithium hydroxide at 700 °C and characterized as cathode materials for lithium ion batteries to various cutoff charge voltages (up to 4.5 V). While the y = 0.05 sample shows an improvement in capacity, cyclability, and rate capability, those with y = 0.1 and 0.2 exhibit a decline in electrochemical performance compared to the y = 0 sample. Structural characterization of the chemically delithiated Li_1−x(Ni_0.5Co_0.5)_1−yFe_yO₂ samples indicates that the initial O3 structure is maintained down to a lithium content (1 − x) ≈ 0.3. For (1 − x) < 0.3, while a P3 type phase is formed for the y = 0 sample, an O1 type phase is formed for the y = 0.05, 0.1 and 0.2 samples. Monitoring the average oxidation state of the transition metal ions with lithium contents (1 − x) reveals that the system is chemically more stable down to a lower lithium content (1 − x) ≈ 0.3 compared to the Li_1−xCoO₂ system. The improved structural and chemical stabilities appear to lead to better cyclability to higher cutoff charge voltages compared to that found before with the LiCoO₂ system.     

ZnO nanocubes with (1 0 1) basal plane photocatalyst prepared via a low-frequency ultrasonic assisted hydrolysis process

The crystallographic plane of the ZnO nanocrystals photocatalyst is considered as a key parameter for an effective photocatalysis, photoelectrochemical reaction and photosensitivity. In this paper, we report a simple method for the synthesis of a new (1 0 1) high-energy plane bounded ZnO nanocubes photocatalyst directly on the FTO surface, using a seed-mediated ultrasonic assisted hydrolysis process. In the typical procedure, high-density nanocubes and quasi-nanocubes can be grown on the substrate surface from a solution containing equimolar (0.04 M) zinc nitrate hydrate and hexamine. ZnO nanocubes, with average edge-length of ca. 50 nm, can be obtained on the surface in as quickly as 10 min. The heterogeneous photocatalytic property of the sample has been examined in the photodegradation of methyl orange (MO) by UV light irradiation. It was found that the ZnO nanocubes exhibit excellent catalytic and photocatalytic properties and demonstrate the photodegradation efficiency as high as 5.7 percent/μg mW. This is 200 times higher than those reported results using a relatively low-powered polychromatic UV light source (4 mW). The mechanism of ZnO nanocube formation using the present approach is discussed. The new-synthesized ZnO nanocubes with a unique (1 0 1) basal plane also find potential application in photoelectrochemical devices and sensing.     

Transition of magnetic anisotropy in Ni/GaAs (0 0 1) observed by magnetization and ferromagnetic resonance

Polycrystalline thin Ni films deposited onto GaAs (0 0 1) show a transition of the magnetic anisotropy depending on its thickness. The anisotropy is perpendicular to the film plane for the thicknesses of the film ⩽12 nm. This becomes in-plane in the films having thicknesses ⩾15 nm. The films are deposited onto the n-type GaAs (0 0 1) substrate by the usual thermal evaporation method and also by the electron beam evaporation in ultra high vacuum onto a GaAs epilayer in the standard molecular beam epitaxy system. The magnetization and ferromagnetic resonance (FMR) are observed in the temperature range from 4.2 to 300 K. For the discussion of the microscopic origin of the anomalous properties in magnetization and FMR experiments, the experimental results are reviewed by introducing a uniaxial anisotropy, which is calculated from the easy-axis and hard-axis magnetization data. This calculated anisotropy is able to explain the temperature and angle dependency of the FMR spectra of the Ni films. Hence the magnetization and FMR spectra are in agreement with the type of the anisotropy and its temperature dependency. In addition to these, the temperature dependence of the in-plane magnetic anisotropy is able to explain the previously reported anomalous effect of reducing the squareness at low temperatures in Ni/GaAs.     

Dual-wavelength investigation of laser-induced damage in multilayer mirrors at 532 and 1064 nm

Thin film beam splitters with high reflectivity at 532 nm and high transmittance at 1064 nm were deposited via reactive electron-beam evaporation with optimized parameters. The damage performance of the samples was investigated under irradiations of 532 nm laser only, 1064 nm laser only, and various combined laser fluences. The damages induced by the 1064 nm laser were primarily attributed to the initiators at the interface between the coatings and substrate. Under 532 nm laser irradiation only, two distinctive damage pits initiated by the submicron absorptive defects located at different coating depths and correlated to interfaces were observed. The damage effect under simultaneous irradiation in multilayer films was also investigated. The respective sensitive defects of the two lasers remained the precursors for causing damage. However, the dominant damage factors in simultaneous irradiation changed with the 1064 nm laser fluence, which also determined the coupling effect between the two lasers in terms of causing damage. Finally, correlative analysis methods were used to discuss the different coupling effects.     

Towards a 1 MW, 170 GHz gyrotron design for fusion application

The electrical design of different components of 1 MW, 170 GHz gyrotron such as, magnetron injection gun, cylindrical interaction cavity and collector and RF window is presented in this article. Recently, a new project related to the development of 170 GHz, 1 MW gyrotron has been started for the Indian Tokamak. TE_34,10 mode is selected as the operating mode after studied the problem of mode competition. The triode type geometry is selected for the design of magnetron injection gun (MIG) to achieve the required beam parameters. The maximum transverse velocity spread of 3.28% at the velocity ratio of 1.34 is obtained in simulations for a 40 A, 80 kV electron beam. The RF output power of more than 1 MW with 36.5% interaction efficiency without depressed collector is predicted by simulation in single-mode operation at 170 GHz frequency. The simulated single-stage depressed collector of the gyrotron predicted the overall device efficiencies >55%. Due to the very good thermal conductivity and very weak dependency of the dielectric parameters on temperature, PACVD diamond is selected for window design for the transmission of RF power. The in-house developed code MIGSYN and GCOMS are used for initial geometry design of MIG and mode selection respectively. Commercially available simulation tools MAGIC and ANSYS are used for beam–wave interaction and mechanical analysis respectively.     

A competition between (0 0 1) and (0 1 1) alignments in yttria stabilized zirconia thin films fabricated by ion beam assisted deposition

Biaxially textured yttria stabilized zirconia (YSZ) thin films, were deposited on glass substrates by ion beam assisted deposition method with different deposition time. As contrasts, films were also fabricated without assisting ion beam. The orientation properties of the films were characterized by X-ray diffraction. A comparative study shows that there is a competition between (0 0 1) and (0 1 1) alignments during the growth process. Assisting ions make the films (0 0 1)-advantaged and biaxially textured. The competitive growth and the orientation development are explained by selective resputtering and anisotropic damage on growing films induced by assisting ions.     

Use of film thickness and Cu additive to improve (0 0 1) texture in MgO/FePtCu(C) bilayers

A multilayer structure has been proposed that demonstrates improved (0 0 1) texture for FePt-based L1₀ perpendicular media. Achieving a strong perpendicular magnetic anisotropy requires aligning the L1₀ crystallographic c-axis along the film normal. The ordered L1₀ FePt structure is tetragonal with a c/a ratio close to 0.965. This makes discriminating between the three crystallographic variants ([1 0 0], [0 1 0], and the desired [0 0 1]) difficult. Alloying FePt with Cu to reduce the c/a ratio and using a multilayer approach to keep the magnetic layers thin results in a structure with an adjustable M_rt and a strong (0 0 1) texture (rocking curve widths around 2°). This is a remarkable improvement in texture from pure FePt multilayered films or monolithic FePt(X) films. The proposed [MgO(2 nm)/Fe_50−xPt₅₀Cu_x(5 nm)]_×n structure limits grain size in the vertical (perpendicular) direction albeit not in the plane of the film. Carbon can be added to the FePtCu layer to reduce the grain size with minimal degradation of the (0 0 1) orientation.     

Surface alloy formation,short-range order,and deuterium adsorption properties of monolayer PdRu/Ru(0 0 0 1) surface alloys

The formation and structure of monolayer PdRu/Ru(0 0 0 1) surface alloys and their adsorption properties with respect to deuterium adsorption were investigated by atomic resolution scanning tunneling microscopy and by temperature programmed desorption. Surface alloys, prepared by deposition of up to one monolayer of Pd and flash annealing to 1150 K show (i) negligible loss of Pd by desorption or diffusion into the Ru bulk during this procedure and (ii) dominant phase separation into 2D Pd and Ru islands, in contrast to the random distribution in PtRu/Ru(0 0 0 1) surface alloys [H.E. Hoster, A. Bergbreiter, P.M. Erne, T. Hager, H. Rauscher, R.J. Behm, Phys. Chem. Chem. Phys. 10 (2008) 3812]. 2D short-range order parameters and the abundance of specific adsorption ensembles were evaluated for different Pd contents, effective pair interaction (EPI) energies were derived from Monte Carlo simulations. Deuterium adsorption on Pd monolayer films shows a pronounced weakening of adsorption bond, which is attributed to compressive strain and metal–metal interactions between Pd and underlying Ru atoms (‘vertical ligand effect’). Mixed adsorption ensembles containing both Pd and Ru atoms give rise to D₂ desorption in the intermediate temperature regime. The impact of the specific lateral distribution of the two metal species on the chemical surface properties is illustrated by comparison with deuterium adsorption on dispersed PtRu/Ru(0 0 0 1) surface alloys [T. Diemant, H. Rauscher, R.J. Behm, J. Phys. Chem. C 112 (2008) 8381].     

Observation of hydrogen adsorption on 6H-SiC(0 0 0 1) surface

We have used coaxial impact-collision ion scattering spectroscopy (CAICISS) and time-of-flight elastic recoil detection analysis (TOF-ERDA) to investigate the adsorption of atomic hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface. It has been found that the saturation coverage of hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface is about 1.7 ML. Upon saturated adsorption of atomic hydrogen, the √3×√3 surface structure changes to the 1×1 structure. The data of the CAICISS measurements have indicated that as a result of the hydrogen adsorption, Si adatoms on the √3×√3 surface move from T₄ to on-top sites.     

Near-surface stresses in silicon(0 0 1)

We report here on a detailed atomistic stress analysis of the near-surface stresses on the 2 × 1 surface reconstruction on Si(0 0 1). We find that the surface stresses are spatially periodic with fairly large amplitude. We additionally investigate the stresses in the neighborhood of an S_A-type step.     

A 980 nm Yb-doped single-mode fiber laser pumped by a 946 nm Q-switched Nd:YAG laser

We demonstrate a 980 nm single-mode Yb-doped fiber laser with a 946 nm Q-switched Nd:YAG laser used as the pump source. The experimental arrangement exploited a 36.5 cm length of fiber and used the output from both ends of the cavity, providing a total average output power of 100 mW with a slope efficiency of 38%. In order to increase the coupling efficiency and the practicability of the fiber laser, another experimental setup with single ended output was studied, producing an average output power of 80 mW from a fiber length of 23.5 cm. The pulse duration is 10 ns at a repetition frequency of 16 kHz. The linewidth of the laser is 4 nm, ranging from 977 to 981 nm.     

Preparation and characterization of Fe3O4(1 1 1) nanoparticles and thin films on Au(1 1 1)

Fe₃O₄ nanoparticles and thin films were prepared on the Au(1 1 1) surface and characterized using X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM). Fe₃O₄ was formed by annealing α-Fe₂O₃(0 0 0 1) structures on Au(1 1 1) at 750 K in ultrahigh vacuum (UHV) for 60 min. Transformation of the α-Fe₂O₃(0 0 0 1) structures into Fe₃O₄ nanoparticles and thin films was supported by XPS. STM images show that during the growth procedure used, Fe₃O₄ initially appears as nanoparticles at low coverages, and forms thin films at ～2 monolayer equivalents (MLE) of iron. Two types of ordered superstructures were observed on the Fe₃O₄ particles with periodicities of ～50 and ～42 Å, respectively. As the Fe₃O₄ particles form more continuous films, the ～50 Å feature was the predominant superstructure observed. The Fe₃O₄ structures at all coverages show a hexagonal unit cell with a ～3 Å periodicity in the atomically resolved STM images.