Diarylbutadiyne derivatives are ideal monomers for providing the π‐electron‐conjugated system of polydiacetylenes (PDAs). The geometrical parameters for diacetylene topochemical polymerization are known. However, control of the molecules under these parameters is yet to be addressed. This work shows that by simply tailoring diarylbutadiyne with amide side‐chain substituents, the arrangement of the substituents and the resulting hydrogen bond framework allows formation of π‐electron‐conjugated PDA.
A recent response on a publication from our team investigating solvent effects on propagation rate coefficients is commented. Among other issues, we point to the fact that the response interprets only a subset of the data provided in our original contribution.
A linear supramolecular polymer based on the self‐assembly of an easily available copillar[5]arene monomer is efficiently prepared, which is evidenced by the NMR spectroscopy, viscosity measurement, and DOSY experiment. The single‐crystal X‐ray analysis reveals that the polymerization of the AB‐type monomer is driven by the quadruple CH•••π interactions and one CH•••O interaction.
Using the third‐generation Grubbs catalyst, the living ring‐opening metathesis polymerization of ferrocene/cobalticenium copolymers is conducted with theoretical numbers of 25 monomer units for each block, and their redox and electrochemical properties allow using the Bard–Anson electrochemical method to determine the number of metallocenyl units in each block.
This study demonstrates the growth of long triisopropylsilyethynyl pentacene (TIPS‐PEN) nanofibrils in a thin film of a crystalline polymer, poly(ε‐caprolactone) (PCL). During spin‐coating, TIPS‐PEN molecules are locally extracted around the PCL grain boundaries and they crystallize into [010] direction forming long nanofibrils. Molecular weight of PCL and weight fraction (α) of TIPS‐PEN in PCL matrix are key factors to the growth of nanofibrils. Long high‐quality TIPS‐PEN nanofibrils are obtained with high‐molecular‐weight PCL and at the α values in the range of 0.03–0.1. The long nanofibrils are used as an active layer in a field‐effect organic transistor.
l ‐Ascorbic acid, commonly known as vitamin C and one of the most important biological compounds, is converted to a α,ω‐diene monomer and subsequently polymerized for the first time by acyclic diene metathesis. Various experimental conditions such as polymerization medium, catalyst type, temperature, and monomer/catalyst ratio are studied. The moderate molecular weight polymers are achieved when the polymerizations are conducted under bulk conditions employing the Grubbs first generation (G1) or Hoveyda–Grubbs second generation catalyst (HG‐2). In the solution case, on the other hand, low molecular weight polymers are obtained regardless of the catalyst type. Moreover, when the catalyst performances are compared, it is found that G1 produces the higher molecular weight as well as higher yield polymers with respect to the HG‐2.
Reversible addition‐fragmentation chain transfer polymerization yields reactive block copolymers bearing the pentafluorophenyl ester (PFPA) group, and subsequent Click amidation using 2,2,6,6‐tetramethylpiperidine‐N‐oxyl‐ and imidazolium‐functionalized primary amines produces the corresponding functional block copolymers, leading to installation of statistical radical‐ and ionic sites into the PFPA segment. The monolayered thin film devices fabricated using the obtained block copolymers exhibit repeatable switching of electric conductivity (on/off ratio > 103) under a bias voltage, which reveals that the coexistence of radicals and ions in the same spherical domain of the copolymer layer is a prerequisite for repeatable switching memory.
Here, the preparation of a novel block copolymer consisting of a statistical copolymer N‐(2‐hydroxypropyl) methacrylamide‐s‐N‐(3‐aminopropyl) methacrylamide and a short terminal 3‐guanidinopropyl methacrylamide block is reported. This polymer structure forms neutral but water‐soluble nanosized complexes with siRNA. The siRNA block copolymer complexes are first analyzed using agarose gel electrophoresis and their size is determined with fluorescence correlation spectroscopy. The protective properties of the polymer against RNA degradation are investigated by treating the siRNA block copolymer complexes with RNase V1. Heparin competition assays confirm the efficient release of the cargo in vitro. In addition, the utilization of microscale thermophoresis is demonstrated for the determination of the binding strength between a fluorescently labeled polyanion and a polymer molecule.
A novel and non‐cytotoxic self‐healing supramolecular elastomer (SE) is synthesized with small‐molecular biological acids by hydrogen‐bonding interactions. The synthesized SEs behave as rubber at room temperature without additional plasticizers or crosslinkers, which is attributed to the phase‐separated structure. The SE material exhibits outstanding self‐healing capability at room temperature and essential non‐cytotoxicity, which makes it a potential candidate for biomedical applications.
Halo‐ester‐functionalized poly(ethylene glycol)s (PEGs) are successfully prepared by the transesterification of alkyl halo‐esters with PEGs using Candida antarctica lipase B (CALB) as a biocatalyst under the solventless conditions. Transesterifications of chlorine, bromine, and iodine esters with tetraethylene glycol monobenzyl ether (BzTEG) are quantitative in less than 2.5 h. The transesterification of halo‐esters with PEGs are complete in 4 h. 1H and 13C NMR spectroscopy with MALDI‐ToF and ESI mass spectrometry confirm the structure and purity of the products. This method provides a convenient and “green” process to effectively produce halo‐ester PEGs.
A new method for fabricating hydrogels with intricate control over hierarchical 3D porosity using microfiber porogens is presented. Melt electrospinning writing of poly(ε‐caprolactone) is used to create the sacrificial template leading to hierarchical structuring consisting of pores inside the denser poly(2‐oxazoline) hydrogel mesh. This versatile approach provides new opportunities to create well‐defined multilevel control over interconnected pores with diameters in the lower micrometer range inside hydrogels with potential applications as cell scaffolds with tunable diffusion and transport of, e.g., nutrients, growth factors or therapeutics.
A simple and effective airflow method to prepare sandwich‐type block copolymer films is reported. The films are composed of three layers: vertically oriented nanocylinders align in both upper and bottom layers and irregular nanocylinders exist in the bulk of the film. The vertically oriented nanocylinders in both sides can provide high accessibility to ions and ensures the exchange of chemical species between the membrane and external environment, while the irregularly oriented nanocylinders in the middle part of the film can prolong the pathway of ions transportation and enhance ions selectivity.
Photoresponsive azobenzene‐containing systems ranging from molecular to macroscopic material levels have greatly been increasing their significance in materials chemistry. This review focuses on the studies on light induced or triggered motions in azobenzene liquid crystalline (LC) polymer films at mesoscopic and microscopic levels. Due to the cooperative nature of liquid crystalline materials, highly efficient photoalignment and photo‐triggered migrating motions are realized in mostly repeated manners. Here, recent advances in surface‐grafted LC polymer brushes, LC block copolymer films, and LC polymer films that exhibit mass migrations are overviewed. Such newly emerged photoresponsive systems are expected to provide new possibilities and applications in polymer thin film technologies.
The chemical control of cell division has attracted much attention in the areas of single cell‐based biology and high‐throughput screening platforms. A mussel‐inspired cytocompatible encapsulation method for achieving a “cell‐division control” with cross‐linked layer‐by‐layer (LbL) shells is developed. Catechol‐grafted polyethyleneimine and hyaluronic acid are chosen as polyelectrolytes for the LbL process, and the cross‐linking of polyelectrolytes is performed at pH 8.5. Cell division is controlled by the number of the LbL nanolayers and cross‐linking reaction. We also suggest a new measuring unit, , for quantifying “cell‐division timing” based on microbial growth kinetics.
Two‐dimensional (2D) palladium nanocube array is achieved on plasma‐etched block copolymer templates, while the well‐aligned nanocubes remain active. Anisotropic nanocubes are site‐selectively assembled on various nanopatterns by capillary force. The nanocube array is proved to be easily tunable, and the dimensional commensurability plays a key role in the configurations of the nanocube assemblies. Not only catalytic nanocube array under confinement but also template for the growth of nanoscale zinc oxide (ZnO) nanorods is exemplified as the potential application of the nanoarray.
A triblock copolymer containing the complementary hydrogen bonding recognition pair ureidoguanosine–diaminonaphthyridine (UG–DAN) as pendant functional groups is synthesized using ring‐opening metathesis polymerization (ROMP). The norbornene‐based DAN monomer is shown to allow for a controlled polymerization when polymerized in the presence of a modified‐UG molecule that serves as a protecting group, subsequently allowing for the fabrication of functionalized triblock copolymers. The self‐assembly of the copolymers was characterized using dynamic light scattering and 1H NMR spectroscopy. It is demonstrated that the polymers self‐assemble via complementary hydrogen bonding motifs even at low dilutions, indicating intramolecular interactions.
The formation of a poly(2,6‐carbazole) derivative during an electrochemical polymerization process is shown. Comparison of 3,5‐bis(9‐octyl‐9H‐carbazol‐2‐yl)pyridine and 3,5‐bis(9‐octyl‐9H‐carbazol‐3‐yl)pyridine by electrochemical and UV–Vis‐NIR spectroelectrochemical measurements and DFT (density functional theory) calculation prove the formation of a poly(2,6‐carbazole) derivative. Both of the compounds form stable and electroactive conjugated polymers.
Flexible, tough, and self‐healable polymeric materials are promising to be a solution to the energy problem by substituting for conventional heavy materials. A fusion of supramolecular chemistry and polymer chemistry is a powerful method to create such intelligent materials. Here, a supramolecular polymeric material using multipoint molecular recognition between cyclodextrin (CD) and hydrophobic guest molecules at polymer side chain is reported. A transparent, flexible, and tough hydrogel (host–guest gel) is formed by a simple preparation procedure. The host–guest gel shows self‐healing property in both wet state and dry state due to reversible nature of host–guest interaction. The practical utility of the host–guest gel as a scratch curable coating is demonstrated.
Hierarchical self‐assembly of transient composite hydrogels is demonstrated through a two‐step, orthogonal strategy using nanoparticle tectons interconnected through metal–ligand coordination complexes. The resulting materials are highly tunable with moduli and viscosities spanning many orders of magnitude, and show promising self‐healing properties, while maintaining complete optical transparency.
Multivalent binding is a key for many critical biological processes and unique recognition and specificity in binding enables many of different glycans and proteins to work in a great harmony within the human body. In this study, the binding kinetics of synthetic glycopolypeptides to the dendritic cell lectin DC‐SIGN and their inhibition potential for DC‐SIGN interactions with the gp120 envelope glycoprotein of HIV‐1 (gp120) are investigated.
