The kinetics of mechanochemical chain scission of poly(phthalaldehyde) (PPA) are investigated. Ultrasound‐induced cavitation is capable of causing chain scission in the PPA backbone that ultimately leads to rapid depolymerization of each resulting polymer fragment when above the polymer's ceiling temperature (Tc). An interesting feature of the mechanochemical breakdown of PPA is that “half‐chain” daughter fragments are not observed, since the depolymerization is rapid following chain scission. These features facilitate the determination of rate constants of activation for multiple molecular weights from a single sonication experiment. Additionally, the degradation kinetics are modified with chain‐end trapping agents through variation of the nature and amount of small molecule nucleophile or electrophile.
The synthesis of tetracene‐ and pentacene‐annulated norbornadienes, formed through the Diels–Alder reaction of a dehydroacene with cyclopentadiene is reported. Ring‐opening metathesis polymerization (ROMP) leads to polymers that are investigated with respect to their physical, optical, and electronic properties by gel permeation chromatography (GPC), UV–vis spectroscopy, and cyclic voltammetry. The pentacene‐containing polymer P1 is successfully integrated into an organic field‐effect transistor (OFET); the tetracene‐containing polymer P2 is integrated into an organic light‐emitting diode (OLED).
By combining living anionic polymerization and hydrosilylation, densely grafted bottlebrush polymers with controlled spacing of branch points are prepared. Dimethyl(4‐vinylphenyl)silane and dimethyl(4‐(1‐phenylvinyl)phenyl)silane are anionically (co)polymerized to synthesize uniform, alternating, and gradient in‐chain silyl–hydride (Si–H) functionalized backbones. The spacing of branch points is controlled effectively by regulating the distribution of Si–H groups along the backbones. Three backbones with a similar number of Si–H groups but variable distributions are used to synthesize corresponding bottlebrush polymers via hydrosilylation between the backbones and chain‐end vinyl functionalized polystyrene. The uniformly grafted bottlebrush exhibits the highest hydrodynamic radius (Rh) of 5.6 nm and the lowest Tg of 79 °C which may be attributed to its compact grafted structure. This methodology exhibits high efficiency and convenience for the construction of bottlebrushes with controlled distribution of brushes.
A powerful variation of traditional radical thiol‐yne reaction with diphenylacetylene (DPA)‐based starting materials leading to the quantitative and selective formation of the corresponding vinyl sulfides is reported. A variety of different thiols are shown to undergo reaction with DPA and the influence of their structure on reactivity is studied. The results obtained from the model reactions are then used to guide the efficient synthesis of hyperbranched poly(vinyl sulfide) (hb‐PVS) systems by employing a dithiol and a trialkyne in an A2 + B3 approach. The polymers obtained show excellent solubility in common organic solvents and exhibit high refractive indices (e.g., 1.70 at 589 nm). The combined ease of processability and potential for cross‐linking make these materials very interesting for applications, such as coatings for optical devices. The selective mono‐addition thiol‐yne reaction on DPA serves not only as a synthetic method for the preparation of PVS but could also be applied to the general modification of acetylene‐containing materials.
Self‐assembly of C3 discotic molecules bearing dipeptide pendants into helical supramolecular polymers is investigated. The dipeptides are constituted from glycine and alanine with altered sequence, aiming at modulating the steric hindrance and examining the steric effects on the assembly. This steric hindrance effect is further illustrated with a dipeptide formed from glycine and valine, which carries a much larger isopropyl side unit. Their supramolecular polymerization is examined in various organic solvents and at different temperatures. The assembly morphology is directly visualized with atomic force microscopy. It is found that small changes in the dipeptide motifs in combination with solvent structure and the solution concentrations lead to different expression of the supramolecular assembly.
Diselenide‐containing polymers are facilely synthesized from polymers prepared by atom transfer radical polymerization (ATRP). Benefiting from the ATRP technology, this protocol provides a flexible route for controlling the polymer structure, which allows for a great variety of architectures of selenium‐containing polymer materials for applications in various fields. The oxidative and reductive responsive behavior of the obtained diselenide‐containing polymers is also investigated.
A substituted poly(9‐borafluorene) (P9BF) homopolymer, a boron congener of polyfluorene, is prepared by Yamamoto coupling of a triisopropylphenyl substituted borafluorene (1). As predicted by prior density functional theory (DFT) studies, P9BF has a reduced optical bandgap (Eg,opt = 2.28 eV) and a significantly lowered LUMO level (−3.9 eV, estimated by cyclic voltammetry (CV)) compared to polyfluorene. In addition to binding fluoride in solution, films of P9BF exhibit a reversible, simultaneous turn‐off/turn‐on fluorescence response to NH3 vapor. A 9‐borafluorene‐vinylene copolymer (P9BFV) is synthesized via Stille coupling, demonstrating that 1 can readily be incorporated into copolymers. The extended conjugation of P9BFV due to the inclusion of the vinylene group results in a reduced optical bandgap (2.12 eV) and LUMO (−4.0 eV, estimated by CV) compared to the homopolymer P9BF.
A pH‐responsive core cross‐linked star (CCS) polymer containing poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) arms was used as an interfacial stabilizer for emulsions containing toluene (80 v%) and water (20 v%). In the pH range of 12.1‐9.3, ordinary water‐in‐oil emulsions were formed. Intermediate multiple emulsions of oil‐in‐water‐in‐oil and water‐in‐oil‐in‐water were formed at pH 8.6 and 7.5, respectively. Further lowering the pH resulted in the formation of gelled high internal phase emulsions of oil‐in‐water type in the pH range of 6.4‐0.6. The emulsion behavior was correlated with interfacial tension, conductivity and configuration of the CCS polymer at different pH.
A general method for very fast and efficient optical healing of crystalline polymers is reported. By loading a very small amount of gold nanoparticles (AuNPs) in either poly(ethylene oxide) (Tm ≈ 63 °C) or low‐density polyethylene (Tm ≈ 103 °C), the heat released upon surface plasmon resonance (SPR) absorption of 532 nm light by AuNPs can melt crystallites in the interfacial region of two polymer pieces brought into contact; and the subsequent recrystallization of polymer chains on cooling merges the two pieces into one. The fracture strength of such repaired sample can reach the level of the undamaged polymer after 10 s laser exposure. Moreover, in addition to an ability of long‐distance remote and spatially selective healing, the optical method also works for polymer samples immersed in water.
The synthesis of hydrophilic, thermoresponsive, and zwitterionic polymethacrylates is reported by Cu(0)‐mediated reversible deactivation radical polymerization in water and/or water/alcohol mixtures. The predisproportionation of [CuI(PMDETA)Cl] in water prior to initiator and monomer addition is exploited to yield well‐defined polymethacrylates with full monomer conversions in 30 min. The addition of supplementary halide salts (NaCl) enables the synthesis of various molecular weight poly[poly(ethylene glycol) methyl ether methacrylate] (PEGMA475) (DPn = 10–80, Mn ≈ 10 000–40 000 g mol−1) with full monomer conversion and narrow molecular weight distributions attained in all cases (Đ ≈ 1.20–1.30). A bifunctional PEG initiator (average Mn ≈ 1000 g mol−1) is utilized for the polymerization of a wide range of methacrylates including 2‐dimethylaminoethyl methacrylate, 2‐morpholinoethyl methacrylate, [2‐(methacryloyloxy)ethyl]dimethyl‐(3‐sulfopropyl)ammonium hydroxide, and 2‐methacryloyloxyethyl phosphorylcholine. Despite the high water content, high end group fidelity is demonstrated by in situ chain extensions and block copolymerizations with PEGMA475 yielding well‐defined functional telechelic pentablock copolymers within 2.5 h.
Herein, the first example of photosensitive cyclic amphiphilic homopolymers consisting of multiple biphenyl azobenzene chromophores in the cyclic main chain tethered with hydrophilic tetraethylene glycol monomethyl ether units is presented. The synthetic approach involves sequentially performed thermal catalyzed “click” step‐growth polymerization in bulk, and Cu(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) intramolecular cyclization from α‐alkyne/ω‐azide linear precursors. It is observed that such amphiphilic macrocycles exhibit increased glass transition temperatures (Tg), slightly faster trans–cis–trans photoisomerization, and enhanced fluorescence emission intensity compared with the corresponding linear polymers. In addition, the cyclic amphiphilic homopolymers self‐assemble into spherical nanoparticles with smaller sizes which possess slower photoresponsive behaviors in a tetrahydrofuran/water mixture compared with those of the linear ones. All these interesting observations suggest that the cyclic topology has a great influence on the physical properties and self‐assembly behavior of these photoresponsive amphiphilic macrocycles in general.
This article summarizes recent progress in the post‐functionalization of conjugated polymers by electrochemical methods. These electrochemical polymer reactions typically proceed via electrochemical doping of a conjugated polymer film, followed by chemical transformation. Examples include the quantitative oxidative fluorination of polyfluorenes and oxidative halogenation of polythiophenes, as well as the reductive hydrogenation of polyfluorenones. The degree of functionalization, otherwise known as the reaction ratio, can be controlled by varying the charge passed through the polymer, allowing the optoelectronic properties of the conjugated polymers to be tailored. Wireless bipolar electrodes with an in‐plane potential distribution are also useful with regard to the electrochemical doping and reaction of conjugated polymers and allow the synthesis of films exhibiting composition gradients. Such bipolar electrochemistry can induce multiple reaction sites during electrochemical polymer reactions.
Coaxial four‐needle electrohydrodynamic forming is applied for the first time to prepare layered structures in both particle and fiber form. Four different biocompatible polymers, polyethylene glycol, poly (lactic‐co‐glycolic acid), polycaprolactone, and polymethylsilsesquioxane, are used to generate four distinct layers confirmed using transmission and scanning electron microscopy combined with focused ion beam milling. The incorporation and release of different dyes within the polymeric system of four layers are demonstrated, something that is much desired in modern applications such as the polypill where multiple active pharmaceutical ingredients can be combined to treat numerous diseases.
Exploiting the tremendous potential of the recently discovered reversible bidirectional shape‐memory effect (rbSME) for biomedical applications requires switching temperatures in the physiological range. The recent strategy is based on the reduction of the melting temperature range (ΔTm) of the actuating oligo(ε‐caprolactone) (OCL) domains in copolymer networks from OCL and n‐butyl acrylate (BA), where the reversible effect can be adjusted to the human body temperature. In addition, it is investigated whether an rbSME in the temperature range close or even above Tm,offset (end of the melting transition) can be obtained. Two series of networks having mixtures of OCLs reveal broad ΔTms from 2 °C to 50 °C and from −10 °C to 37 °C, respectively. In cyclic, thermomechanical experiments the rbSME can be tailored to display pronounced actuation in a temperature interval between 20 °C and 37 °C. In this way, the application spectrum of the rbSME can be extended to biomedical applications.
Halo‐ester‐functionalized poly(ethylene glycol)s (PEGs) are successfully prepared by the transesterification of alkyl halo‐esters with PEGs using Candida antarctica lipase B (CALB) as a biocatalyst under the solventless conditions. Transesterifications of chlorine, bromine, and iodine esters with tetraethylene glycol monobenzyl ether (BzTEG) are quantitative in less than 2.5 h. The transesterification of halo‐esters with PEGs are complete in 4 h. 1H and 13C NMR spectroscopy with MALDI‐ToF and ESI mass spectrometry confirm the structure and purity of the products. This method provides a convenient and “green” process to effectively produce halo‐ester PEGs.
Nanoscale polymer thin films exhibit strong confinement effects on Tg arising from free surfaces. However, the coupled influence of molecular weight (MW) and surface effects on Tg is not well understood for low MW film systems below the entanglement length. Utilizing atomistically informed coarse‐grained molecular dynamics simulations for poly(methyl methacrylate) (PMMA), it is demonstrated that the decrease in free‐standing film Tg with respect to bulk is more significant for low MW compared to high MW systems. Investigation of the local interfacial properties reveals that the increase in the local free volume near the free surface is greater for low MW, explaining the MW dependence of Tg‐confinement behaviors. These findings corroborate recent experiments on low MW films, and highlight the relationship between nanoconfinement phenomena and local free volume effects arising from free surfaces.
The modulation of the cloud point of aqueous poly(N,N‐diethylacrylamide) solutions via the formation of supramolecular cyclodextrin complexes with hydrophobic end groups, namely adamantyl, tert‐butyl phenyl and azobenzene, synthesized via RAFT polymerization is described. The dependence of the apparent cloud points after cyclodextrin complexation is investigated with respect to the type and quantity of the guest end group, the polymer chain length and the cyclodextrin/end group ratio. Furthermore, the effect is reversed via the addition of guest molecules or via biocompatible enzymatic degradation of the cyclodextrins entire.
This paper demonstrates the development of pH and thermo‐responsive fluorescent nanoparticles, which are composed of graphene oxide (GO) with BODIPY conjugated PEG, to trigger the detection of cancer cells through imaging based on intracellular accommodation. Responsiveness to pH is studied using atomic force microscopy and apparent thickness differences are seen with changes in pH. Confocal images of the nanoparticles (NPs) exhibit remarkably bright fluorescence at lysosomal pH, while no fluorescence is observed under a physiological environment, making the NPs a novel fluorescent probe. The NPs are able to accumulate the hydrophobic anticancer drug DOX due to the hydrophobic surface of GO and show excellent drug release behavior. Therefore, the NPs developed are novel candidates for a fluorescent probe to identify cancer cells and a drug carrier for cancer therapy.
The chemical synthesis of a novel polyfuran, poly(2,3‐bis(hexylthio)‐[1,4]dithiino[2,3‐c]furan) ( PBDF ), substituted at the 2,3‐positions with an S‐alkylated dithiin unit, is reported. The new polymer has been characterized in terms of its electronic absorption, electrochemical, and thermal properties. Employment of the dithiin moiety provides intrinsic additional electroactivity, as well as a functional handle for substitution with alkyl groups, enhancing the processability of the polymer. The new polymer is compared with the closely related and well‐established literature compounds PEDOT and PEDTT as well‐studied, highly chalcogenated polythiophenes.
Well‐defined poly(2,5‐dihexyloxyphenylene‐1,4‐diyl) (PPP) is successfully synthesized by the Negishi catalyst‐transfer polycondensation (NCTP) using dilithium tetra(tert‐butyl)zincate (tBu4ZnLi2). The obtained PPP possesses the number‐averaged molecular weight (M n) values in the range of 2100–22 000 and the molar‐mass dispersity (Ð M) values in the range of 1.09–1.23. In addition, block copolymers containing PPP and poly(3‐hexylthiophene) (P3HT) segments (PPP‐b‐P3HT) are synthesized to confirm the feasibility of chain extension between the different monomers based on NCTP.
